786baebbf8
Confirm dangerous extruder target temperatures.
...
Protect the user from typos in setting the extruder temp by confirming
them with the user if they exceed 250.
2013-02-02 10:25:16 -05:00
659cc0319b
Merge pull request #324 from Lenbok/experimental-gcoder-relative-e
...
Support M82/M83 for relative E
2013-01-24 15:45:44 -08:00
e2630df4bb
Support M82/M83 for relative E
2013-01-25 07:29:45 +13:00
c527601f85
Merge pull request #321 from colah/clean-firmware-echo
...
Clean up echoed firmware lines, connect info.
2013-01-19 00:39:25 -08:00
1460246960
Clean up echoed firmware lines, connect info.
...
Presently, when you connect to a printer using pronsole, one sees
something like:
uninitialized>start
uninitialized>Printer is now online
uninitialized>echo: External Reset
printer>Marlin 1.0.0 RC2
...
With a few carriage returns and some string hackery, we clean up
the output so that one sees:
No port specified - connecting to /dev/ttyACM0 at 115200bps
start
Printer is now online
External Reset
Marlin 1.0.0 RC2
Much cleaner!
2013-01-19 18:34:15 -05:00
c02e586533
Merge pull request #320 from colah/clean-monitor
...
Clean up the monitor command.
2013-01-19 00:39:06 -08:00
3fb7a3e71c
Clean up the monitor command.
...
The monitor command now:
* Has more pythonic code
* Limits precision of progress elements (12.3% instead of 12.347812...%)
* Uses a carriage return to have print progress replace the previous
progress line.
For example:
Monitoring printer, use ^C to interrupt.
Updating values every 5.000000 seconds.
Print progress: 0.3%
Previously, the line "Print progress: 0.3%" was "Print progress: 0.2%",
etc.
2013-01-19 19:11:04 -05:00
2a9433748c
Merge pull request #319 from colah/dynamic-prompt
...
Fancy configurable prompts!
2013-01-19 00:38:49 -08:00
29c9700324
Fancy configurable prompts!
...
* Prompts are now generated based off of string templates,
for example: "%(bold)sT:%(extruder_temp_fancy)s %(progress_fancy)s
>%(normal)s "
* We have a dictionary of prompt string templates for different
situations.
* We have bold support for the prompt.
* We have extruder temperature support for the prompt.
* We have progress support for the prompt.
2013-01-19 19:34:07 -05:00
92821f7e41
Merge pull request #317 from sivu/experimental
...
gcoder updated
2013-01-13 13:03:09 -08:00
aa1e576a1e
gcoder updated
2013-01-13 23:00:19 +02:00
917256f947
Merge pull request #314 from colah/Ctr-C-D-fix
...
Fix Ctr-C and Ctr-D behavior.
2013-01-12 11:50:41 -08:00
e73a8a9402
Merge pull request #313 from colah/temp-prompt
...
Temp prompt
2013-01-12 11:17:00 -08:00
a377b85c8f
Make the dynamic prompt temperature stuff configurable.
2013-01-12 14:14:10 -05:00
d3c1fbaa75
Fix Ctr-C and Ctr-D behavior.
...
We replace the cmdloop function with a slightly modified version
to achieve standard unix shell behavior on keyboard interupts and EOF.
2013-01-11 19:26:04 -05:00
a224a10ce0
We make the prompt aware of extruder temperature.
...
In order to do this, we consolidate handeling of printer status
with a Status class. The status class is updated by recvcb.
This has the side effect of simplifying the implementation of gettemp.
We also detect whether there is a heated build platform or not, and
don't display info about it if there isn't.
2013-01-11 19:02:14 -05:00
df0265d4c6
Make prompt dynamically generated.
...
Prompt is now generated by a promptf() call for every cmdloop iteration.
2013-01-09 18:59:39 -05:00
80403aa7eb
Make port textbox bigger
2012-11-13 17:36:12 +01:00
13a1425bad
Merge pull request #297 from sivu/experimental
...
updated gcoder
2012-11-09 00:15:33 -08:00
8f6f24d7a4
updated gcoder
2012-11-09 00:06:59 +02:00
6fa47668f2
Merge branch 'master' of github.com:kliment/Printrun into experimental
...
Conflicts:
pronterface.py
2012-11-03 12:18:04 +01:00
1d23c81f8e
Merge pull request #293 from sivu/experimental
...
added gcoder from another project. using gcoder to calculate dimensions and used filament
2012-10-17 11:22:33 -07:00
94666c2d13
updated gcoder copyright notice
2012-10-17 21:19:51 +03:00
577ed7c8fb
added gcoder from another project. using gcoder to calculate dimensions and used filament
2012-10-17 20:47:12 +03:00
51b5cf46dd
Merge pull request #291 from sivu/experimental
...
fixed measurement calculation for X and Y axis
2012-10-09 09:23:11 -07:00
ab9002c579
fixed measurement calculation for X and Y axis
...
Conflicts:
pronsole.py
2012-10-09 19:06:46 +03:00
b6935b93d5
Merge pull request #288 from hroncok/master
...
Add the GNU GPL text as the licese itselfs demands
2012-09-23 17:13:33 -07:00
fa9ec49858
Added the GNU GPL text as the licese itselfs demands.
2012-09-24 01:01:21 +02:00
7333e93cc3
Merge pull request #286 from iXce/split-gui
...
GUI creation split
2012-09-10 04:56:18 -07:00
9c55677ec1
Fix custom button edit
2012-09-06 19:32:23 +02:00
7301d7e847
Merge branch 'experimental' of git://github.com/kliment/Printrun into split-gui
2012-09-06 18:07:08 +02:00
55ff65805b
Correctly parent xyz buttons code-wise
2012-09-06 17:35:44 +02:00
77376bc17c
Fix custom buttons
2012-09-06 09:02:47 +02:00
ab7c278200
Merge branch 'experimental' of github.com:kliment/Printrun into experimental
2012-09-06 07:08:40 +02:00
1581ab0b94
Fix exception when no bed present. Closes #283
2012-09-06 07:07:37 +02:00
8979ec888a
Rename macroed to MacroEditor
2012-09-05 17:30:28 +02:00
f8b7a52cbc
Whitespace cleanup (extra newlines) on graph.py
2012-09-05 17:00:26 +02:00
37a442e6fd
Cleanup imports
2012-09-05 16:55:28 +02:00
02ef52d777
Remove temperature gauges entirely from codebase
2012-09-05 16:46:39 +02:00
ae7bac414b
More cleanup of buttons handling, sanitize custom buttons
2012-09-05 16:32:35 +02:00
d01cb51a57
Remove dead code
2012-09-05 15:47:10 +02:00
bbcdf2f383
Cleanup factorized button creation, start using it more
2012-09-05 15:46:50 +02:00
8974ada134
Fix autosized button creation
2012-09-05 15:45:55 +02:00
0487808469
Improve lookup of files
2012-09-05 15:11:34 +02:00
ffd7ff55dd
Improve lookup of files
2012-09-05 15:11:11 +02:00
b4f0240d4d
Merge branch 'experimental' of github.com:kliment/Printrun into experimental
2012-09-05 14:43:08 +02:00
6b7532e723
re module was missing in pronterface_widgets
2012-09-05 14:40:16 +02:00
0d7a722839
Use correct variable for uppersizer
2012-09-05 14:37:03 +02:00
123fbf3802
re module was missing in pronterface_widgets
2012-09-05 13:27:49 +02:00
5f8d69c653
Merge branch 'experimental' of https://github.com/kliment/Printrun into split-gui
2012-09-05 13:26:00 +02:00
Christopher Olah