Gina Häußge
4371fa500c
Adjusted README
2013-06-09 18:42:32 +02:00
Gina Häußge
1f06faa167
Update README.md
2013-03-30 18:31:17 +01:00
Gina Häußge
e1d4832026
Moved configuration description to wiki and removed obsolete information regarding the repository rename.
2013-03-16 02:40:42 +01:00
Gina Häußge
1e381cc793
Moved setup instructions for Raspbian to a wiki page.
2013-03-16 00:34:40 +01:00
Gina Häußge
3350b48a76
Merge remote-tracking branch 'origin/master' into devel
2013-03-16 00:32:18 +01:00
Gina Häußge
dc5b8d9606
Update README.md
2013-03-16 00:17:12 +01:00
Gina Häußge
b7a3105655
Smallish fixes for argparser
2013-03-11 21:04:56 +01:00
Gina Häußge
363f00775b
New config options for daemonization, configfile location and basedir location
...
Using --daemon {start|stop|restart} OctoPrint can now be daemonized/controlled in daemon mode. Via --pidfile it's possible to set the pidfile to use, --configfile allows specification of the config.yaml to use, --basedir specifies the location of the basedir from which to base off the upload, timelapse and log folders. I also updated the README to include some config file settings which were previously undocumented.
2013-03-11 21:00:43 +01:00
Gina Häußge
fe1e02a1de
Added run-as-daemon to the readme.
2013-03-10 21:33:45 +01:00
Gina Häußge
1ead7ba23c
Added Pines Notify to the credits.
2013-03-10 17:55:31 +01:00
Gina Häußge
7fc8dd22a1
Added some info to the readme regarding system commands
2013-03-10 17:46:46 +01:00
Gina Häußge
2ade4948fc
The jog controls aren't ugly any more and we have some more stuff than just jog controls now
2013-03-06 23:44:58 +01:00
Gina Häußge
b3bbfb4574
Merge remote-tracking branch 'origin/master' into devel
2013-03-02 12:02:18 +01:00
Gina Häußge
e3cc7ad941
Update README.md
...
config.ini => config.yaml
2013-02-26 15:14:06 +01:00
Gina Häußge
55244c2f7c
Added example for multiple commands
2013-02-23 18:13:04 +01:00
Gina Häußge
bd68e0ae54
Added sorting and filtering options for gcode files.
...
Closes #21
2013-02-10 21:48:24 +01:00
Gina Häußge
eeb2036bab
Merged devel to master, adjusted README a bit.
2013-02-09 23:28:00 +01:00
Gina Häußge
7d4dc54bdf
Added gcode viewer setting to the README
2013-02-03 22:02:57 +01:00
Gina Häußge
84c9403e65
parametrized_command => parametric_command
2013-01-27 18:52:25 +01:00
Gina Häußge
ebc7352a42
config.ini is now config.yaml
2013-01-27 18:30:07 +01:00
Gina Häußge
ee7a1f9615
Added custom controls via configuration file.
...
Closes #13
2013-01-27 18:28:11 +01:00
Gina Häußge
357514ca0e
Added instructions on what to do after the rename
2013-01-27 11:23:55 +01:00
Gina Häußge
1482292b33
Added instructions on what to do after the rename
2013-01-27 11:23:01 +01:00
Gina Häußge
05c5a679f2
Merge remote-tracking branch 'origin/master'
2013-01-27 11:14:50 +01:00
Gina Häußge
df443f335c
Updated README after repository rename
2013-01-27 11:14:42 +01:00
Gina Häußge
ac907cf942
Update README.md
...
Added dependency on subversion package for compiling mjpg-streamer
2013-01-21 18:38:31 +01:00
Gina Häußge
126ca22f99
Moved LICENSE file to root directory to make it more visible. Added hint to README.md that OctoPrint is released under AGPL
2013-01-20 00:29:48 +01:00
Gina Häußge
072205ee82
Added forgotton sudo to pip command, thanks Andreas Gohr for spotting this.
2013-01-19 13:31:46 +01:00
Gina Häußge
e54f1e683d
Name explanation
2013-01-19 00:06:41 +01:00
Gina Häußge
56e211f5ec
Updated README for merge of socketio branch.
2013-01-18 23:44:12 +01:00
Gina Häußge
c77df98980
Changed instructions to use run shellscript
2013-01-18 23:44:12 +01:00
Gina Häußge
720f3b3eb6
Renamed from Printer WebUI to OctoPrint
...
The location of the config folder has changed. OctoPrint will try to migrate the configuration from its old location (~/.printerwebui, ...) to its new one (~/.octoprint, ...). For this to work the following conditions must be met: 1) the old config folder exists and is a directory 2) the new config folder does not exist at all. The migration functionality will be in the future.
2013-01-18 23:44:11 +01:00
Gina Häußge
574961ceac
Added option to disable analysis of gcode upon loading a file for print. Disabling this allows for a faster loading time (especially on a Raspberry Pi) but with the disadvantage of losing information regarding estimated filament length and print time.
2013-01-18 23:44:09 +01:00
Gina Häußge
a777c369c7
Added note about needing a powered USB hub
2013-01-14 14:33:00 +01:00
Gina Häußge
06675100b4
Update README.md
2013-01-13 13:43:44 +01:00
Gina Häußge
99ed13160f
Changed installation and configuration hints to use avconv on Raspberry Pi instead of ffmpeg (which seems to ignore the bitrate commandline parameter and hence produces horribly blocky videos)
2013-01-04 23:43:32 +01:00
Gina Häußge
7ffb8c3bd7
Only enable timelapse feature when necessary config settings are made. Expanded on documentation.
2013-01-04 18:38:50 +01:00
Gina Häußge
02f2436cd5
Futher work on timelapse support
2013-01-03 21:38:46 +01:00
Gina Häußge
35e6b19332
Timelapse support. At the moment the feature only creates a series of (grabbed) images in the timelapse folder in the settings dir. Next step will be to create a movie from that.
2013-01-03 15:25:20 +01:00
Gina Häußge
81fb1ae305
Small correction in README
2013-01-03 00:49:44 +01:00
Gina Häußge
4e4eed84bb
Removed python based webcam support (didn't work well with the raspi), switched instead to external stream (mjpg-streamer being the preferred webcam server)
2013-01-03 00:39:17 +01:00
Gina Häußge
a85ea69fb0
Established settings mechanism
...
Allows reading and writing default serial port and baudrate (this also is available via the web interface) and setting the host and port on which the server should listen. Might allow persisting more options in the future.
The configuration file is stored in ~/.printerwebui/config.ini under Linux, in %APPDATA%/PrinterWebUI/config.ini under Windows and should be stored in ~/Library/Application Support/config.ini under MacOS X
Closes #1
2013-01-01 21:04:00 +01:00
Gina Häußge
a0cac835b5
Major reorganization to only include the communication stack from Cura.
2012-12-31 13:18:55 +01:00
Gina Häußge
cd04fb705f
New commandline options for debugging and specifying host/port of server to bind to, also added to readme.
2012-12-29 12:11:49 +01:00
Gina Häußge
375fffdd3f
Upload location is now platform dependent
...
win32 defaults to %APPDATA%/Cura/uploads
macos defaults to ~/Library/Application Support/Cura/uploads (I hope, can't test it...)
linux defaults to ~/.cura/uploads
Server now also checks if file to be uploaded or deleted ends on .gcode and makes filename secure before doing anything on the filesystem
Also added favicon ;) and some bla to the README.md
2012-12-27 00:04:12 +01:00
Ilya Kulakov
59ccbb256c
Fix typo in requirements.
2012-12-07 15:00:07 +07:00
Ilya Kulakov
948bbb8d13
Upload formula.
2012-12-07 14:53:23 +07:00
Ilya Kulakov
a9dcc800f2
Fix typo in README.
2012-12-06 15:59:59 +07:00
Ilya Kulakov
4dcb07e4be
Finish updating README for Mac OS X.
2012-12-06 14:57:18 +07:00
Ilya Kulakov
0a1b1c419a
Start updating README for Mac OS X.
2012-12-05 20:16:50 +07:00