Update README.md
parent
df0e3b41cf
commit
06675100b4
|
@ -86,8 +86,12 @@ The following example config should explain the available options:
|
|||
Setup on a Raspberry Pi running Raspbian
|
||||
----------------------------------------
|
||||
|
||||
I currently run the Printer WebUI on a Raspberry Pi running Raspbian (http://www.raspbian.org/). For the basic
|
||||
package you'll need Python 2.7 (should be installed by default), pip and flask:
|
||||
I currently run the Printer WebUI on a Raspberry Pi running Raspbian (http://www.raspbian.org/). I recommend to use
|
||||
a maximum baudrate of 115200 baud in your printer firmware, as the used Python serial module does not support
|
||||
250000 baud in all Linux distributions yet (Raspbian being not one of them, at least according to my experience).
|
||||
|
||||
For the basic package you'll need Python 2.7 (should be installed by default), pip and a couple of dependencies
|
||||
listed in requirements.txt:
|
||||
|
||||
cd ~
|
||||
sudo apt-get install python-pip git
|
||||
|
|
Loading…
Reference in New Issue