doorman2: electric boogaloo

• esp32/ contains the micropython source which talks w/ NFC module and keypad over UART (two channels)
• keypad/ has some magical Arduino code (sorry)

scanning new cards

connect USB cable, use mpremote or any serial termnal to listen to logs, read card hash from logs

example:

$ mpremote 
Connected to MicroPython at /dev/ttyUSB1
Use Ctrl-] or Ctrl-x to exit this shell
PN532: No response from PN532!
PN532: No response from PN532!
PN532: No response from PN532!
Card UUID: 403dcb1e
Card hash: dfe9bedbf230cf67dfa65249a7517af81175496642724a18ac728ecac7c90862
Unknown hash, ignoring
PN532: No response from PN532!
PN532: No response from PN532!
$

syncing data from LDAP

big TODO; currently, you need to:

1. use the tools/get_hashes python script to pull card hashes from LDAP (requires python-ldap)
2. put the output in a hashes file
3. mpremote fs cp hashes :hashes

plans: web UI like vuko's design

esp <-> keypad protocol definition

• one byte per command, no delimeters, keypad is supposed to be as stateless as possible
• the keypad can only send numbers and the hash symbol
• ESP can send the following commands:
  • H ("happy" noise, success; turns on the green LED for a second and turns it back off)
  • S ("sad" failure noise; likewise with the red LED)
  • F ("flush"; turns off LEDs and tries to bring the env to a sane level)
  • G, R ("green", "red"; turns on the specific LEDs)
  • Q ("quiet"; turns on audible keypresses)

---

i am so sorry