pio2_gpio_init() annotated with __init, but called by pio2_probe()
which is annotated __devinit. pio2_gpio_exit() is annotated __exit,
but is called by pio2_probe() and by pio2_remove() which is annotated
__devexit.
Signed-off-by: Gerard Snitselaar <dev@snitselaar.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix some lines that where fairly long judging off the
code around it.
Signed-off-by: Andrew Miller <amiller@amilx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed spaces before tabs and
moved while statement in front of '}'
Signed-off-by: Andrew Miller <amiller@amilx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need for internal module versioning for in-kernel driver:
remove mei_version.h
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clean up the if statement's conditions to make them more
readable
fix the if statement's body indention, one tab stop to many.
Signed-off-by: Andrew Miller <amiller@amilx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added maintainer for staging/ozwpan to MAINTAINERS file.
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change mei_write_message's return type from bool to int
to enable propagation of the error code up to caller functions.
The function now returns -EIO when low level write fails and 0
on success.
A similar change is done in intermediate caller functions:
mei_send_flow_control, mei_connect, and mei_disconnect
This makes code more alike to typical Linux kernel error
handling.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below patch fixes some typos in drivers/staging/mei/* that I have found while
doing a little bit of reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because we don't have vblank hooked up via drm_irq (which is a bit
awkward due to separation between omapdss (which knows the irq #)
and omapdrm, for now use gettimeofday to have a semi-sane timestamp
in the page-flip event. Otherwise apps like weston drm compositor,
which use the timestamp in it's animations, get highly confused.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The endwin irq indicates that DSS has finished scanning out a buffer.
Use this to trigger page-flip event to userspace, so this happens
only *after* the previous buffer is finished.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Multiple video pipes on same output with same z-order is an undefined
behavior. Set a unique z-order value based on overlay number/id.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dynamic loader was called by node.c with an interface. This interface was
also modified to avoid the use of nldr_init() and nldr_exit().
There is not functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The nldr module has a nldr_init() and a nldr_exit() whose only purpose
is to keep a reference counting which is not used at all.
This patch only removes the reference count variable, but not the
functions, because they are used through an interface.
There is no functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gh module has a gh_init() and a gh_exit(), but they don't do
anything, they are just noops.
This patch removes these functions.
There is no functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev module has a dev_init() and a dev_exit() whose only purpose is
to keep a reference counting which is not used at all.
This patch removes these functions and the reference count variable.
There is no functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dmm module has a dmm_init() and a dmm_exit() whose only purpose is
to keep a reference counting which is not used at all.
This patch removes these functions and the reference count variable.
There is no functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cmm module has a cmm_init() and a cmm_exit() whose only purpose is
to keep a reference counting which is not used at all.
This patch removes these functions and the reference count variable.
There is no functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The io module has a io_init() and a io_exit() whose only purpose is to
keep a reference counting which is not used at all.
This patch removes these functions and the reference count variable.
There is no functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The msg module has a msg_mod_init() and a msg_exit() whose only
purpose is to keep a reference counting which is not used at all.
This patch removes these functions and the reference count variable.
There is no functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The chnl module has a chnl_init() and a chnl_exit() whose only purpose
is to keep a reference counting which is not used at all.
This patch removes these functions and the reference count variable.
There is no functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rmm module has a rmm_init() and a rmm_exit() whose only purpose is
to keep a reference counting which is not used at all.
This patch removes these functions and the reference count variable.
There is no functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The strm module has a strm_init() and a strm_exit() whose only purpose
is to keep a reference counting which is not used at all.
This patch removes these functions and the reference count variable.
There is no functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The disp module has a disp_init() and a disp_exit() whose only purpose
is to keep a reference counting which is not used at all.
This patch removes these functions and the reference count variable.
There is no functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The node module has a node_init() and a node_exit() whose only purpose
is to keep a reference counting which is not used at all.
This patch removes these functions and the reference count variable.
There is no functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The proc module has a proc_init() and a proc_exit() whose only purpose
is to keep a reference counting which is not used at all.
This patch removes these functions and the reference count variable.
There is no functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cod module has a cod_init() and a cod_exit() whose only purpose is
to keep a reference counting which is not used at all.
This patch removes these functions and the reference count variable.
There is no functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The drv module has a drv_init() and a drv_exit() whose only purpose is
to keep a reference counting which is not used at all.
This patch removes these functions and the reference count variable.
There is no functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
binder_update_page_range could read freed memory if the vma of the
selected process was freed right before the check that the vma
belongs to the mm struct it just locked.
If the vm_mm pointer in that freed vma struct had also been rewritten
with a value that matched the locked mm struct, then the code would
proceed and possibly modify the freed vma.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WARNING: vmlinux.o(.text+0xfcf6e): Section mismatch in reference
from the function ram_console_driver_probe() to the function
.init.text:persistent_ram_init_ringbuffer()
The function ram_console_driver_probe() references
the function __init persistent_ram_init_ringbuffer().
This is often because ram_console_driver_probe lacks a __init
annotation or the annotation of persistent_ram_init_ringbuffer is
wrong.
Move this driver to platform_driver_probe() because ram console
devices aren't going to be added and removed at runtime. Also
shorten the probe function name since driver is redundant and
makes the function name long.
Cc: Android Kernel Team <kernel-team@android.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Linux kernel has a setting called dmesg_restrict. When true,
only processes with CAP_SYSLOG can view the kernel dmesg logs. This
helps prevent leaking of kernel information into user space.
On Android, it's possible to bypass these restrictions by viewing
/proc/last_kmsg.
This change makes /proc/last_kmsg require the same permissions as
dmesg.
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Nick Kralevich <nnk@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the persistent ram buffer is not available, ram_console_late_init
would crash when dereferencing ram_console_zone. Return early if
ram console was not initialized.
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the notrace attribute to persistent_ram_write and the
non-ecc functions that it calls to allow persistent_ram to
be used for ftracing (only when ecc is disabled).
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow persistent_ram_write to be called on multiple cpus at
the same time, as long as ecc is not in use. Uses atomics
for the buffer->start and buffer->size counters.
[jstultz: Fix up some pr_info casting issues on 64bit]
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the ioremapped memory passed in from the drivers with
a memblock_reserve and vmap. Adds a new function,
persistent_ram_early_init, designed to be called from the machine
init_early callback, that calls memblock_remove and saves the
provided persistent ram area layout.
Drivers only pass in their struct device * and ecc settings.
Locating and mapping the memory is now handled entirely within
persistent_ram.
Also, convert ram_console to the new persistent_ram_init
parameters that only take a struct device * and ecc settings.
[jstultz: Fix pr_info casting issues on 64bit, folded two
patches as the build breaks if they are apart. Also replaced
phys_to_page() w/ pfn_to_page(addr>>PAGE_SHIFT), as phys_to_page
is only on a few arches.]
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION and related
#ifdefs. Also allow persistent ram zones without ecc enabled.
For some use cases, like the data portion of the upcoming
persistent_vars patches, or a persistent ftrace ringbuffer,
ecc on every update is too expensive.
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split ram_console into two halves.
persistent_ram is a set of apis that handle a block of memory
that does not get erased across a reboot. It provides functions
to fill it as a single buffer or a ring buffer, and to extract
the old data after a reboot. It handles ecc on the data to
correct bit errors introduced during reboot.
ram_console is now a small wrapper around persistent_ram that
feeds console data into the ringbuffer, and exports the old
data to /proc/last_kmsg after a reboot.
[jstultz: Moved persistent_ram.h to staging dir]
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Equivalent functionality can be obtained with loglevel=15
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Early ramconsole is not very useful, an early crash will prevent
getting the logged data out on the next boot, and CONFIG_DEBUG_LL=y
will get the same information. Drop it to simplify a future
refactoring.
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't store the bootinfo string and the ecc status string with
the recovered old log data. This will simplify refactoring the
persistent ram code out of the ram console code later.
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We want to ensure that we get all the console messages, even ones
that occur while the printing CPU is not yet online.
[jstultz: tweaked commit subject line]
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In mei_irq_thread_read_bus_message we reused mei_hdr
allocated on read buffer to write the stop message.
There is no bug associated with this but for code
clarity we use write buffer also for message header.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deal with the case of buffers with virtual stride larger than one
page in fault_2d().
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch splits the DMM off into a separate sub-device, in order to
utilize the platform device information that was created as part of
the OMAP hwmod entry for the DMM.
The driver probe function queries the iomem resource and IRQ using
standard platform_get functions.
The OMAP DRM driver now calls the platform_driver_register() function
for the subordinate DMM driver inside its probe function. This
guarantees the required order for the DMM and ensures the DMM resources
are available for use by the DRM driver.
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added check for valid device information before dumping debugfs
information.
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OMAP3 does not contain a DMM/Tiler block. As such, we should not
be exposing any DMM debugfs entries on OMAP3 platforms.
Added inline helper function to verify existence of DMM.
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gerard Snitselaar