Commit graph

18490 commits

Author SHA1 Message Date
Paul Mackerras
a7fdd90bc4 [PATCH] ppc: Remove powermac support from ARCH=ppc
This makes it possible to build kernels for PReP and/or CHRP
with ARCH=ppc by removing the (non-building) powermac support.
It's now also possible to select PReP and CHRP independently.
Powermac users should now build with ARCH=powerpc instead of
ARCH=ppc.  (This does mean that it is no longer possible to
build a 32-bit kernel for a G5.)

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 17:30:44 +11:00
Haren Myneni
e8625d4635 [PATCH] powerpc: Kconfig changes for CRASH_DUMP
Noticed in 2.6.15-git9 that CRASH_DUMP option is moved to top level.
Moved CRASH_DUMP into "kernel options" next to KEXEC and this config
option supports only for PPC64 at this time.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 16:50:04 +11:00
Benjamin Herrenschmidt
4683b54c1d [PATCH] powerpc: Update pmac32_defconfig
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 16:50:01 +11:00
Benjamin Herrenschmidt
4c882b0191 [PATCH] powerpc: Fix Maple build
The changes to the device node structure broke Maple build. This fixes it.
Unfortunately I coudn't test as my Maple board appears to be dead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 13:14:47 +11:00
Haren Myneni
8385a6a3ac [PATCH] powerpc: Fix kdump copy regs and dynamic allocate per-cpu crash notes
- This contains the arch specific changes for the following the
kdump generic fixes which were already accepted in the upstream.
       .   Capturing CPU registers (for the case of 'panic' and invoking
the dump using 'sysrq-trigger') from a function (stack frame) which will
be not be available during the kdump boot. Hence, might result in
invalid stack trace.
       .   Dynamically allocating per cpu ELF notes section instead of
statically for NR_CPUS.

- Fix the compiler warning in prom_init.c.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 13:14:42 +11:00
Paul Mackerras
9216ad8cb7 powerpc/32: Generate miboot images with ARCH=powerpc
Miboot images are apparently still used on some old 32-bit powermacs,
so build them with ARCH=powerpc if we're 32-bit and powermac support
is enabled.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 13:00:08 +11:00
Alexander Viro
7c7dce9209 [PATCH] Fix double decrement of mqueue_mnt->mnt_count in sys_mq_open
Fixed the refcounting on failure exits in sys_mq_open() and
cleaned the logics up.  Rules are actually pretty simple - dentry_open()
expects vfsmount and dentry to be pinned down and it either transfers
them into created struct file or drops them.  Old code had been very
confused in that area - if dentry_open() had failed either in do_open()
or do_create(), we ended up dentry and mqueue_mnt dropped twice, once
by dentry_open() cleanup and then by sys_mq_open().

Fix consists of making the rules for do_create() and do_open()
same as for dentry_open() and updating the sys_mq_open() accordingly;
that actually leads to more straightforward code and less work on
normal path.

Signed-off-by: Al Viro <aviro@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 12:38:17 -08:00
Linus Torvalds
12dbf3fc4d Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2006-01-14 12:16:07 -08:00
Linus Torvalds
61b7efddc5 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/spi-2.6 2006-01-14 10:43:26 -08:00
Linus Torvalds
3e2b32b693 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6 2006-01-14 10:42:40 -08:00
Adrian Bunk
3824ba7df9 [PATCH] remove unused tmp_buf_sem's
tmp_buf_sem sems to be a common name for something completely unused...

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> ("usb portion")
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 10:41:42 -08:00
Xose Vazquez Perez
e1b114ee90 [PATCH] docs: update some updated code docs
Based on comments from Randy Dunlap on my previous commit
5b0ed2c64d

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 10:39:53 -08:00
Evgeniy
7b4ee73e28 [PATCH] ufs cleanup
Here is update of ufs cleanup patch, brought on by the recently fixed
ubh_get_usb_second() bug that made some ugly code rather painfully
obvious.  It also includes

 - fix compilation warnings which appears if debug mode turn on
 - remove unnecessary duplication of code to support UFS2

I tested it on ufs1 and ufs2 file-systems.

Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 10:27:32 -08:00
Linus Torvalds
59af70385f Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 2006-01-14 09:55:28 -08:00
Linus Torvalds
e7de369050 Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/input 2006-01-14 09:49:16 -08:00
andrew.vasquez@qlogic.com
fc091e0382 [SCSI] qla2xxx: Update version number to 8.01.04-k.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:40 -06:00
andrew.vasquez@qlogic.com
79f89a4296 [SCSI] qla2xxx: Disable port-type RSCN handling via driver state-machine.
Given the semantic changes in both the device-model and
fc-transport APIs, the driver's handling of port-type RSCNs
via a series of ADISCs and PLOGIs can cause series of
badness ranging from unexpectedly device loss to devices not
being discovered.

In the interim, disable (via a module-parameter) this
feature and allow RSCN management to continue to occur
within the driver's DPC thread.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:39 -06:00
andrew.vasquez@qlogic.com
fdd52dfa3c [SCSI] qla2xxx: Kconfig update: Add URL to download firmware images.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:37 -06:00
andrew.vasquez@qlogic.com
c0eb875526 [SCSI] qla2xxx: Correct setting of FDMI supported/current port speed.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:36 -06:00
andrew.vasquez@qlogic.com
bc8fb3cb9e [SCSI] qla2xxx: Correct execution-throttle setting for ISP24xx.
Similarly to other ISPs, set execution throttle to maximum
allowed value since 'throttling' is done on a per-lun basis
via queue-depth.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:35 -06:00
andrew.vasquez@qlogic.com
590f98e5e8 [SCSI] qla2xxx: Collapse load RISC RAM implementations.
Simplify essentially duplicate load RISC RAM implementation
in qla2x00_load_ram_ext() and qla2x00_load_ram().

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:34 -06:00
andrew.vasquez@qlogic.com
f94097edf2 [SCSI] qla2xxx: Correct swing/emphasis settings for ISP24XX.
Swing/emphasis settings in NVRAM were not being honoured due
to the driver not converting the serial-link options from LE
to host-endian format.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:33 -06:00
andrew.vasquez@qlogic.com
c9d02acf39 [SCSI] qla2xxx: Correct issue where portstate does not transition during loop-resync.
If the Get Port Database call fails during local-loop
update, then schedule the DPC routine to perform a rescan as
the firmware would have updated the Get ID List port-entries
of their new state.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:31 -06:00
andrew.vasquez@qlogic.com
210d53507e [SCSI] qla2xxx: Update firmware-dump procedure for ISP24xx.
Small changes to register retrieval and order as per latest
firmware specification.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:30 -06:00
andrew.vasquez@qlogic.com
e978010ceb [SCSI] qla2xxx: Re-enable flash-part write protection on ISP24xx boards.
Driver would not correctly re-enable the write-protection
bits of the flash part after updates.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:29 -06:00
andrew.vasquez@qlogic.com
5998983113 [SCSI] qla2xxx: Correct excessive delay during LOAD-RISC-RAM mailbox command.
Problem report (against 2.4.x driver) from Jeff Layton
<jlayton@redhat.com>:

An OEM noticed that the U6 qla2200 driver would hang for
around 2 minutes at boot time and then proceed normally. I
found that the delay was occurring when loading the new
firmware into the card, and was due to a
schedule_timeout(10) added to the bottom of the polling
loop.

Some testing showed that the load ram operation on the card
was very quick (on the order of a couple of jiffies), but
the sleep in the polling loop was making each operation take
around 25-30.

The attached patch corrects this by making it skip sleeping
during the load ram operation, since I believe we only do
that when the module is plugged in. It also skips sleeping
if the mbox_int flag got set during the current loop.

This corrected the hang on my test setup, and OEM also
confirmed that it corrected the problem for them.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:28 -06:00
andrew.vasquez@qlogic.com
03ab2eabed [SCSI] qla2xxx: Use msleep() as delay during ISP polling.
Mailbox commands are polled for completion during ISP
initialization.  During potentially 'long' mailbox commands
(i.e. fabric login), we really don't want a busy-wait delay
to potentially trigger a (benign) soft-lockup BUG().

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:27 -06:00
andrew.vasquez@qlogic.com
e038a1be22 [SCSI] qla2xxx: Drop noisy 'UNDERRUN' status message.
There's no point in displaying the message during a valid
underrun case.  Limit the message to potentially problematic
cases.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:26 -06:00
andrew.vasquez@qlogic.com
9403688e9b [SCSI] qla2xxx: Correct FC4 feature assignment during RFF_ID.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:24 -06:00
andrew.vasquez@qlogic.com
dad9c8c15d [SCSI] qla2xxx: Reference proper node/port names in fc_host class.
The initial-control-block references are not always correct
as the use-node-name qualifier during NVRAM configuration
will cause the firmware to use the portname as a base for
the nodename.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:23 -06:00
Mike Christie
a1e80c20e1 [SCSI] iscsi: use pageslab
From: FUJITA Tomonori <tomof@acm.org> and zhenyu.z.wang@intel.com:

We cannot handle filesystems like XFS becuase of the pages they
are sending us. We had thought page_count could be used to
work around this, but the correct test is for PageSlab.

The proper solution is to figure out what type of pages
filesystems can use so we do not have to add tests like
this or handle it in the block layer for all network block drivers
but the issue still has not been resolved on fs-devel
so we are sending this patch as a temporary fix.

This is last patch just in case it is Nakd with the explanation
that we need to push the correct fix through fs-devel, mm
or the block layer. The rest of the patchset can live without
the patch, but the driver will not work with filesystems like
XFS.

Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:22 -06:00
Mike Christie
55e3299d9e [SCSI] iscsi: fix 4k stack iscsi setups
When we run the xmit code from queuecomand the stack trace
gets too deep. The patch runs the xmit code from the scsi_host
work queue. This fixes 4k stack and xfs support and should
fix the st and sg stack usage bugs.

Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:21 -06:00
Mike Christie
7b8631b53b [SCSI] iscsi: seperate iscsi interface from setup functions
This is the second version of the patch to address Christoph's comments.
Instead of doing the lib, I just kept everything in scsi_trnapsort_iscsi.c
like the FC and SPI class. This was becuase the driver model and sysfs
class is tied to the session and connection setup so separating did not
buy very much at this time.

The reason for this patch was becuase HW iscsi LLDs like qla4xxx cannot
use the iscsi class becuase the scsi_host was tied to the interface and
class code. This patch just seperates the session from scsi host so
that LLDs that allocate the host per some resource like pci device
can still use the class.

This is also fixes a couple refcount bugs that can be triggered
when users have a sysfs file open, close the session, then
read or write to the file.

Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:20 -06:00
Mike Christie
7cae5159dd [SCSI] iscsi: add high mem support
From Mike Christie <michaelc@cs.wisc.edu> and FUJITA Tomonori <tomof@acm.org>:

We cannot use page_address becuase some pages could be highmem.
Instead, we can use sock_no_sendpage which does kmap for us.

Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:18 -06:00
FUJITA Tomonori
56851698c2 [SCSI] iscsi: data digest page cache usage fix
Users can write to a page while we are sending it and making
digest calculations. This ends up causing us to retry the command
when a digest error is later reported. By using sock_no_sendpage
when data digests are calculated we can avoid a lot of (not all but it
helps) the retries becuase sock_no_sendpage is not zero copy.

Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:17 -06:00
zhenyu.z.wang@intel.com
3e97c7e6cd [SCSI] iscsi: host locking fix
We should be taking the host_lock instead of the conn lock when
checking host_busy.

Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:16 -06:00
zhenyu.z.wang@intel.com
bf310b8f58 [SCSI] iscsi: data under/over flow fix
We need to check the ISCSI_FLAG_DATA_* flags.

Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:15 -06:00
FUJITA Tomonori
42f72aa9e5 [SCSI] iscsi: whitespace cleanup
Remove extra whitespaces.

Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:14 -06:00
Jes Sorensen
a12e25bd59 [SCSI] sem2mutex 3w-[x9]xxx
Convert a the 3w-9xxx.c and 3w-xxxx.c drivers to use mutexes instead
of semaphores. Untested, but compiles and looks obviously correct.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:12 -06:00
James Bottomley
3759b78849 [SCSI] mptfc: need to select transport attrs
Now that mptfc actually uses the transport class, it can't be built
without it.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:11 -06:00
Moore, Eric
569b11dcfa [SCSI] fusion - fix pci express bug
The fix is to write  'MPI_HIM_DIM' to the Host Interrupt Mask
register, when enabling interrupts.  Instead of the
tilde of MPI_HIM_RIM.

Apparently writing '1's to some of the reserved bits was causing
all the bits to go to `1`, which effectly disabled all interrupts.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:10 -06:00
Moore, Eric
e6bc863cf2 [SCSI] scsi_transport_sas: mapping the rphy channel equal to the port identifier
We will be mapping the RAID volumes in mptsas to a reserved
channel that
is one larger than the anticapated number of ports on the direct
attached host
adapter.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:09 -06:00
Moore, Eric
4b915a7366 [SCSI] fusion - mpi header udpate
This updates mpi headers in fusion drivers to version 1.5.12.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:08 -06:00
Moore, Eric
816aa907b9 [SCSI] fusion - adding raid support in mptsas
The SAS RAID volumes are reported beyond the expected number of phys.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:06 -06:00
Christoph Hellwig
e02f3f5922 [SCSI] remove target parent limitiation
When James Smart fixed the issue of the userspace scan atributes
crashing the system with the FC transport class he added a patch to
let the transport class check if the parent is valid for a given
transport class.

When adding support for the integrated raid of fusion sas devices
we ran into a problem with that, as it didn't allow adding virtual
raid volumes without the transport class knowing about it.

So this patch adds a user_scan attribute instead, that takes over from
scsi_scan_host_selected if the transport class sets it and thus lets
the transport class control the user-initiated scanning.  As this
plugs the hole about user-initiated scanning the target_parent hook
goes away and we rely on callers of the scanning routines to do
something sensible.

For SAS this meant I had to switch from a spinlock to a mutex to
synchronize the topology linked lists, in FC they were completely
unsynchronized which seems wrong.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:05 -06:00
Moore, Eric
6d5b0c315e [SCSI] fusion - adding support for FC949ES
Add software recognition for the new LSI Logic Fibre Channel controller.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:04 -06:00
Michael Reed
05e8ec17f4 [SCSI] mptfusion - fc transport attributes
Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:02 -06:00
Jes Sorensen
d158d26167 [SCSI] sem2mutex: scsi_transport_spi.c
Convert the SCSI transport class code to use a mutex rather than a
semaphore.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:01 -06:00
James Bottomley
f20139bee4 [SCSI] fix up message/i2o/pci.c
There was a use before initialisation of c->name

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:54:59 -06:00
Christoph Hellwig
1ca00bb791 [SCSI] fusion: kzalloc / kcalloc conversion
Convert kmalloc + memset to kzalloc or kcalloc in fusion.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:54:58 -06:00