Commit graph

84401 commits

Author SHA1 Message Date
James Bottomley
99cb813794 [SCSI] update my email address
This updates steeleye -> hansenpartnership in the documentation since
some email has been going astray because of this.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:42 -06:00
James Bottomley
89dddbce9c [SCSI] add protocol definitions
A lot of SCSI command replies have a protocol ID field.  Add
definitions for the interpretation of that from SPC-3.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:41 -06:00
James Bottomley
366c246de9 [SCSI] sd: handle bad lba in sense information
Some devices report medium error locations incorrectly.  Add guards to
make sure the reported bad lba is actually in the request that caused
it.  Additionally remove the large case statment for sector sizes and
replace it with the proper u64 divisions.

Tested-by: Mike Snitzer <snitzer@gmail.com>
Cc: Stable Tree <stable@kernel.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:41 -06:00
Andrew Vasquez
d7402cd910 [SCSI] qla2xxx: Update version number to 8.02.00-k8.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:40 -06:00
Andrew Vasquez
e6e074f175 [SCSI] qla2xxx: Correct issue where incorrect init-fw mailbox command was used on non-NPIV capable ISPs.
BIT_2 of the firmware attributes is only valid on FW-interface-2
type HBAs.  Code in commit
c48339decc would cause the
incorrect initialize-firmware mailbox command to be issued for
non-NPIV capable ISPs.  Correct this by reverting to previously
used (and correct) pre-condition 'if' check.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:40 -06:00
Seokmann Ju
da4541b63b [SCSI] qla2xxx: Access the proper 'physical' port in FC-transport callbacks.
For following fc_host specific attributes, vports rely on the pport.
 So, this patch changed way to access the data for those attributes so that
 they can access pport's.
 - get_host_speed (speed)
 - get_host_port_state (port_state)
 - get_host_port_type (port_type)
 - get_fc_host_stats

Also, added PORT_SPEED_8GB case in the speed attribute for 8Gb HBAs.

Signed-Off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:40 -06:00
Seokmann Ju
99363ef81c [SCSI] qla2xxx: Correct issue where vport-state was not updated during an ISP_ABORT_NEEDED requst.
While running IO simultaneously through physical port and virtual
port, if user changes Data Rate (from scli utility), IO through
virtual port fails.  It failed because the vport had not received
the ISP_ABORT_NEEDED notification.

Signed-Off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:39 -06:00
Andrew Vasquez
963b0fdd3a [SCSI] qla2xxx: Move RISC-interrupt-register modifications to qla2x00_request_irqs().
There's no functional change involved with this update, instead
it simply migrates the "set cleared interrupt state" codes to a
more approprate method, qla2x00_request_irqs(), and cleans-up the
driver's probe() logic.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:39 -06:00
Andrew Vasquez
3db0652ef9 [SCSI] qla2xxx: Consolidate RISC-parity enablement codes.
Collapse duplicate codes called during probe() and RISC-reset
into qla2x00_setup_chip().

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:39 -06:00
Andrew Vasquez
e87110852d [SCSI] qla2xxx: Cleanse memory allocation logic during probe.
- Drop loop-till-allocated structure of code within
  qla2x00_mem_alloc().
- Properly unwind deallcations of memory during failures.
- Drop qla2x00_allocate_sp_pool() and qla2x00_free_sp_pool()
  functions as their implementations can easily be collapsed into
  the callers.
- Defer DMA pool allocation of SFP data until requested.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:39 -06:00
Andrew Vasquez
0afb467b47 [SCSI] qla2xxx: Clear EFT buffer before firmware reinitialization.
To insure that there is no stale data present during EFT
re-registration.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:39 -06:00
Andrew Vasquez
df4bf0bb5b [SCSI] qla2xxx: Cleanup any outstanding SRB resources during shutdown.
Refactor SRB-failure completion codes in the process.  Also,
signal the DPC routine to complete sooner as backend processing
at shutdown-time is superflous.

[jejb: resolve conflicts with pci_enable_device_bars removal]

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:38 -06:00
Andrew Vasquez
61623fc34f [SCSI] qla2xxx: Add MODULE_FIRMWARE hint for ISP25XX firmware.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:38 -06:00
Andrew Vasquez
948882f6b7 [SCSI] qla2xxx: Correct resource_size_t usages.
Hmm, it looks like the conversion to resource_size_t usage
(3776541d8a) requires some additional
fixups to cleanup the structure-pointer castings used during IO mapped
accesses to the chip.

There's only a small number of locations, where the driver uses IO
mapped accesses to the hardware, the patch below should take care of
it without introducing to many structural changes to code flow.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:38 -06:00
Mike Christie
4c85187931 [SCSI] iscsi: bump version to 2.0-868
Set iscsi version to 2.0-868

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:38 -06:00
Mike Christie
8b1d03434e [SCSI] libiscsi: fix session age rollover and remove cid encoding
The session age mask is only 4 bits, but session->age is 32. When
it gets larger then 15 and we try to or the bits some bits get
dropped and the check for session age in iscsi_verify_itt is useless.

The ISCSI_CID_MASK related bits are also useless since cid is always
one.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:37 -06:00
Mike Christie
322d739da8 [SCSI] iscsi: fix up iscsi printk prefix
Some iscsi class messages have the dev_printk prefix and some libiscsi
and iscsi_tcp messages have "iscsi" or the module name as a prefix which
is normally pretty useless when trying to figure out which session
or connection the message is attached to. This patch adds iscsi lib
and class dev_printks so all messages have a common prefix that
can be used to figure out which object printed it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:37 -06:00
Mike Christie
c238c3bba9 [SCSI] iscsi class: fix iscsi conn attr counter
There are 13 iscsi conn attrs, but since the IF/OF markers were not being
used we did not notice that we forgot to increment the ISCSI_CONN_ATTRS
counter.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:37 -06:00
Mike Christie
ad294e9cd1 [SCSI] libiscsi: fix setting of nop timer
If we rollover then we could get a next_timeout of zero, so we need
to set the new timer to that value.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:37 -06:00
Mike Christie
921601b703 [SCSI] qla4xxx: add async scan support
qla4xxx has the old school startup/probe where it finds presetup sessions
in its flash and then attempts to log into them before returning from the
probe. This however, makes it very simple to add a iscsi class scan finished
helper which the driver can use.

In future patches Dave or I will rip apart the driver to make it more
like qla2xxx, but for now this is a very simple two line patch which
fixes the problem of trying to figure out when the initial sessions
are done being scanned.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:35 -06:00
Mike Christie
8aae18adb2 [SCSI] iscsi class: add async scan helper
In qla4xxx's probe it will call the iscsi session setup functions
for session that got setup on the initial start. This then makes
it easy for the iscsi class to export a helper which indicates
when those scans are done.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:35 -06:00
Mike Christie
568d303b5b [SCSI] qla4xxx: fix recovery timer and session unblock race
If qla4xxx is resetting up a session and the recovery timer
fires we do not want to just set it to dead, because
the dpc thread could have just set it to online and is in the
middle of resetting it up.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:35 -06:00
Mike Christie
bd976f62cd [SCSI] iscsi class: add session scanning
This just adds iscsi session scanning which works like fc rport scanning.
The future patches will hook the drivers into Mathew Wilcox's async
scanning infrastructure, so userspace does not have to special case
iscsi and so userspace does not have to make a extra special case for
hardware iscsi root scanning.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:35 -06:00
Mike Christie
7fb1921b07 [SCSI] qla4xxx: use iscsi class session state check ready
This has qla4xxx use the iscsi class's check ready function
in the queue command function, so all iscsi drivers return the
same error value for common problems.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:35 -06:00
Mike Christie
b635930de9 [SCSI] qla4xxx: directly call iscsi recovery functions
Qla4xxx can just call the iscsi recovery functions directly.
There is no need for userspace to do this for qla4xxx, because
we do not use the mutex to iterate over devices anymore and iscsi_block
/unblock_session can be called from interrupt context or the dpc thread.
And having userspace do this just creates uneeded headaches for qla4xxx root
situations where the session may experience problems. For example
during the kernel shutdown the scsi layer wants to send sync caches, but at
this time userspace is not up (iscsid is not running), so we cannot
recover from the problem.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:34 -06:00
Mike Christie
6eabafbe66 [SCSI] iscsi class, libiscsi: add iscsi sysfs session state file
This adds a iscsi session state file which exports the session
state for both software and hardware iscsi. It also hooks libiscsi
in.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:34 -06:00
Boaz Harrosh
84ac86ca8c [SCSI] arm: convert to accessors and !use_sg cleanup
- convert to accessors and !use_sg cleanup

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Tested-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:34 -06:00
James Bottomley
c9e86b8b1d [SCSI] mca_53c9x: remove driver
This driver depends on the deprecated NCR53C9X core and needs to be converted
to the esp_scsi core.

Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:34 -06:00
Tony Battersby
3dfcb701e1 [SCSI] sym53c8xx: fix resid calculation
This patch fixes the calculation of the data transfer residual for the
case of a command that is supposed to transfer an odd number of bytes on
a wide bus but transfers nothing instead.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:34 -06:00
Aegis Lin
51883b5e60 [SCSI] ps3rom: sector size should be 512 bytes
It should be desired that 64 KiB is available for ATAPI transferrring.
(Historically) in SCSI/block layer sector size is defined as 512 during
sector-byte calculation.
Originally in ps3rom.c CD_FRAMESIZE (2048) was used, which limited
/sys/block/sr0/queue/max_sectors_kb to 16 KiB (32 sectors).

Signed-off-by: Aegis Lin <aegislin@gmail.com>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:33 -06:00
Thomas Bogendoerfer
0bb67f1818 [SCSI] sun3x_esp: convert to esp_scsi
Converted sun3x_esp driver to use esp_scsi.c

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:33 -06:00
Adrian Bunk
f8d9d654fc [SCSI] libiscsi: make __iscsi_complete_pdu() static
__iscsi_complete_pdu() can now become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:33 -06:00
Salyzyn, Mark
5234e25c35 [SCSI] aacraid: fib context lock for management ioctls (take 2)
The first patch (a119ee8ee3) was a bit
too aggressive and nested the locks (!) unit testing was in
error. This patch was reverted by
203a512f09.

This new patch should fix the locks correctly.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:33 -06:00
Linus Torvalds
df922075f2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  BKL-removal: Implement a compat_ioctl handler for JFS
  BKL-removal: Use unlocked_ioctl for jfs
2008-02-07 13:21:02 -08:00
Linus Torvalds
6e5565f949 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (34 commits)
  Input: i8042 - non-x86 build fix
  Input: pxa27x_keypad - also enable on PXA3xx
  Input: pxa27x_keypad - add debounce_interval to the keypad platform data
  Input: pxa27x_keypad - use device resources for I/O memory mapping and IRQ
  Input: pxa27x_keypad - enable rotary encoders and direct keys
  Input: pxa27x_keypad - introduce pxa27x_keypad_config()
  Input: pxa27x_keypad - introduce driver structure and use KEY() to define matrix keys
  Input: pxa27x_keypad - remove pin configuration from the driver
  Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard)
  Input: constify function pointer tables (seq_operations)
  Input: i8042 - add Fujitsu-Siemens Amilo Pro 2010 to nomux list
  Input: i8042 - enable DMI quirks on x86-64
  Input: i8042 - add Dritek quirk for Acer Aspire 9110
  Input: add input event to APM event bridge
  Input: mousedev - use BIT_MASK instead of BIT
  Input: remove duplicate includes
  Input: remove cdev from input_dev structure
  Input: remove duplicated headers in drivers/char/keyboard.c
  Input: i8042 - add Dritek keyboard extension quirk
  Input: add Tosa keyboard driver
  ...
2008-02-07 12:57:44 -08:00
Linus Torvalds
e5a9e8e689 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Negotiate locking protocol versions.
2008-02-07 12:46:35 -08:00
Linus Torvalds
bfa271d026 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  sysfs: remove BUG_ON() from sysfs_remove_group()
  Driver core: Revert "Fix Firmware class name collision"
  Block: Fix whole_disk attribute bug
2008-02-07 12:45:28 -08:00
Andi Kleen
ef1fc2f01e BKL-removal: Implement a compat_ioctl handler for JFS
The ioctls were already compatible except for the actual values so this
was fairly easy to do.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
2008-02-07 13:45:29 -06:00
Jesse Barnes
123f794fa7 i915: Fix GR register array size off-by-one bug
Make sure we have enough room for all the GR registers or we'll end up
clobbering the AR index register (which should actually be harmless
unless the BIOS is making an assumption about it).

Noticed-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jesse Barnes <jesse.barnes@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:35:13 -08:00
Andi Kleen
baab81fa51 BKL-removal: Use unlocked_ioctl for jfs
Convert jfs_ioctl over to not use the BKL. The only potential race
I could see was with two ioctls in parallel changing the flags
and losing the updates. Use the i_mutex to protect against this.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
2008-02-07 13:33:58 -06:00
Greg Kroah-Hartman
969affd276 sysfs: remove BUG_ON() from sysfs_remove_group()
It's possible that the caller of sysfs_remove_group messed up and passed in an attribute group that was not really registered to this kobject.  But don't panic for such a foolish error, spit out a warning about what happened, and continue on our way safely.

Cc: Roland Dreier <rdreier@cisco.com>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-07 11:31:46 -08:00
Michael E Brown
7d640c4a5b Driver core: Revert "Fix Firmware class name collision"
This reverts commit 109f0e93b6.

The original patch breaks BIOS updates on all Dell machines. The path to
the firmware file for the dell_rbu driver changes, which breaks all of
the userspace tools which rely on it.

Note that this patch re-introduces a problem with i2c name collision
that was previously fixed by this patch.

Signed-off-by: Michael E Brown <michael_e_brown@dell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-07 11:31:46 -08:00
Greg Kroah-Hartman
f4a00a2c06 Block: Fix whole_disk attribute bug
The "whole_disk" attribute was not properly converted in the block
device conversion earlier, and if the file is read, bad things can
happen.  This patch fixes this, making the attribute an empty one,
preserving the original functionality.

Many thanks to David Miller for finding this, and pointing me in the
proper place within the block code to look.

Acked-by: David S. Miller <davem@davemloft.net>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-07 11:31:46 -08:00
Linus Torvalds
0afc2edfad Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC32]: Use regsets in arch_ptrace().
  [SPARC64]: Use regsets in arch_ptrace().
  [SPARC32]: Use regsets for ELF core dumping.
  [SPARC64]: Use regsets for ELF core dumping.
  [SPARC64]: Remove unintentional ptrace debugging messages.
  [SPARC]: Move over to arch_ptrace().
  [SPARC]: Remove PTRACE_SUN* handling.
  [SPARC]: Kill DEBUG_PTRACE code.
  [SPARC32]: Add user regset support.
  [SPARC64]: Add user regsets.
  [SPARC64]: Fix booting on non-zero cpu.
2008-02-07 10:21:26 -08:00
Linus Torvalds
a8e98d6d51 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (120 commits)
  [MTD] Fix mtdoops.c compilation
  [MTD] [NOR] fix startup lock when using multiple nor flash chips
  [MTD] [DOC200x] eccbuf is statically defined and always evaluate to true
  [MTD] Fix maps/physmap.c compilation with CONFIG_PM
  [MTD] onenand: Add panic_write function to the onenand driver
  [MTD] mtdoops: Use the panic_write function when present
  [MTD] Add mtd panic_write function pointer
  [MTD] [NAND] Freescale enhanced Local Bus Controller FCM NAND support.
  [MTD] physmap.c: Add support for multiple resources
  [MTD] [NAND] Fix misparenthesization introduced by commit 78b65179...
  [MTD] [NAND] Fix Blackfin NFC ECC calculating bug with page size 512 bytes
  [MTD] [NAND] Remove wrong operation in PM function of the BF54x NFC driver
  [MTD] [NAND] Remove unused variable in plat_nand_remove
  [MTD] Unlocking all Intel flash that is locked on power up.
  [MTD] [NAND] at91_nand: Make mtdparts option can override board info
  [MTD] mtdoops: Various minor cleanups
  [MTD] mtdoops: Ensure sequential write to the buffer
  [MTD] mtdoops: Perform write operations in a workqueue
  [MTD] mtdoops: Add further error return code checking
  [MTD] [NOR] Test devtype, not definition in flash_probe(), drivers/mtd/devices/lart.c
  ...
2008-02-07 10:20:31 -08:00
Linus Torvalds
f0f1b3364a Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (112 commits)
  ACPI: fix build warning
  Revert "cpuidle: build fix for non-x86"
  ACPI: update intrd DSDT override console messages
  ACPI: update DSDT override documentation
  ACPI: Add "acpi_no_initrd_override" kernel parameter
  ACPI: its a directory not a folder....
  ACPI: misc cleanups
  ACPI: add missing prink prefix strings
  ACPI: cleanup acpi.h
  ACPICA: fix CONFIG_ACPI_DEBUG_FUNC_TRACE build
  ACPI: video: Ignore ACPI video devices that aren't present in hardware
  ACPI: video: reset brightness on resume
  ACPI: video: call ACPI notifier chain for ACPI video notifications
  ACPI: create notifier chain to get hotkey events to graphics driver
  ACPI: video: delete unused display switch on hotkey event code
  ACPI: video: create "brightness_switch_enabled" modparam
  cpuidle: Add a poll_idle method
  ACPI: cpuidle: Support C1 idle time accounting
  ACPI: enable MWAIT for C1 idle
  ACPI: idle: Fix acpi_safe_halt usages and interrupt enabling/disabling
  ...
2008-02-07 09:45:58 -08:00
Linus Torvalds
4383f18b7f Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  backlight: Add OMAP1 PWL backlight driver
  backlight: Avoid unecessary driver callbacks
2008-02-07 09:45:37 -08:00
Linus Torvalds
3d50337f62 Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Add HP Jornada 6xx driver
  leds: Remove the now uneeded ixp4xx driver
  leds: Add power LED to the wrap driver
  leds: Fix led-gpio active_low default brightness
  leds: hw acceleration for Clevo mail LED driver
  leds: Add support for hardware accelerated LED flashing
  leds: Standardise LED naming scheme
  leds: Add clevo notebook LED driver
2008-02-07 09:45:14 -08:00
Geert Uytterhoeven
5b808a5935 m68k: kill page walker compile warning
The recently introduced page walker (walk_page_range()) calls pgd_offset with a
const struct mm_struct pointer, causing the following compile warning on m68k:

    mm/pagewalk.c:111: warning: passing argument 1 of 'pgd_offset' discards qualifiers from pointer target type

Make the `mm' parameter of the inline function pgd_offset() const to shut it
up.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 09:10:06 -08:00
Linus Torvalds
d31d295409 Merge branch 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (22 commits)
  drm: add initial r500 drm support
  radeon: setup the ring buffer fetcher to be less agressive.
  drm: fixup some of the ioctl function exit paths
  drm: the drm really should call pci_set_master..
  i915: Add chipset id for Intel Integrated Graphics Device
  drm: cleanup DRM_DEBUG() parameters
  drm/i915: add support for E7221 chipset
  drm: don't cast a pointer to pointer of list_head
  mga_dma: return 'err' not just zero from mga_do_cleanup_dma()
  drm: add _DRM_DRIVER flag, and re-order unload.
  drm: enable udev node creation
  drm: Make DRM_IOCTL_GET_CLIENT return EINVAL when it can't find client #idx.
  drm: move drm_mem_init to proper place in startup sequence
  drm: call driver load function after initialising AGP
  drm: Fix ioc32 compat layer
  drm: fd.o bug #11895: Only add the AGP base to map offset if the caller didn't.
  i915: add suspend/resume support
  drm: update DRM sysfs support
  drm: Initialize the AGP structure's base address at init rather than enable.
  drm: move two function extern into the correct block
  ...
2008-02-07 09:07:16 -08:00