This patch adds a helper function for retriving a iio_dev struct from a device
struct. Currently we open-code this in two different ways. One is using
dev_get_drvdata on the device and the other is using container_of. The new
helper function uses the container_of solution as it creates slightly smaller
code and also will eventually free up the drvdata pointer for usage by invidual
drivers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit ee6aeff, a swatch warning was fixed by moving some code inside
an if block that is executed only when the pointer padapter is not NULL.
In fact, padapter can never be NULL and the corect fix should have been
the removal of the test of padapter.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio_device_free has to be called regardless of whether the device has been
registered or not when freeing it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds platform data for the AT91 ADC driver support for
the AT91SAM9M10G45-EK board.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds platform data for the AT91 ADC driver support for
the AT91SAM9G20-EK board.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the ADC driver for Atmel's AT91SAM9G20-EK, AT91SAM9M10G45-EK
and AT91SAM9X5 family boards.
It has support for both software and hardware triggers.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The AT91 SoCs often embeds an ADC. This patch adds the needed
platform data to specify the informations required by the driver
to work properly.
For now, we only need the reference voltage and which channels
are available on the board.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes since V1:
Apply review feedback:
Introduce and use IIO_CHAN_INFO_HARDWAREGAIN
Introduce and use Use IIO_VAL_INT_PLUS_MICRO_DB
Modify out of staging include paths.
Convert to new iio core API naming.
Changes since V2:
more sanity checking in write_raw
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RAMster does many zcache-like things. In order to avoid major
merge conflicts at 3.4, ramster used lzo1x directly for compression
and retained a local copy of xvmalloc, while zcache moved to the
new zsmalloc allocator and the crypto API.
This patch moves ramster forward to use zsmalloc and crypto.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the sysfs device attributes are created by the comedi
core after each comedi device is created. This can lead to a race
condition where userspace gets an add event before the files are
created.
Register the device attributes with the comedi class so that the
driver core handles creating them and we avoid the race.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A corresponding function to persistent_ram_new().
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This includes devices' memory (e.g. framebuffers or memory mapped
EEPROMs on a local bus), as well as the normal RAM that we don't use
for the main memory.
For the normal (but unused) ram we could use kmaps, but this assumes
highmem support, so we don't bother and just use the memory via
ioremap.
As a side effect, the following hack is possible: when used together
with pstore_ram (new ramoops) module, we can limit the normal RAM region
with mem= and then point ramoops to use the rest of the memory, e.g.
mem=128M ramoops.mem_address=0x8000000
Sure, we could just reserve the region with memblock_reserve() early in
the arch/ code, and then register a pstore_ram platform device pointing
to the reserved region. It's still a viable option if platform wants
to do so.
Also, we might want to use IO accessors in case of a real device,
but for now we don't bother (the old ramoops wasn't using it either, so
at least we don't make things worse).
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor out vmap logic out of persistent_ram_buffer_map(), this will
make the code a bit more understandable when we'll add support for
non-bootmem memory.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The routine just creates a persistent ram zone at a specified address.
For persistent_ram_init_ringbuffer() we'd need to add a
'struct persistent_ram' to the global list, and associate it with a
device. We don't need all this complexity in pstore_ram, so we introduce
the simple function.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor post init logic out of __persistent_ram_init(), we'll need
it for the new persistent_ram_new() routine.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a longstanding bug, almost unnoticeable when calling
persistent_ram_write() for small buffers.
But when called for large data buffers, the write routine behaves
incorrectly, as the size may never update: instead of clamping
the size to the maximum buffer size, buffer_size_add_clamp() returns
an error (which is never checked by the write routine, btw).
To fix this, we now use buffer_size_add() that actually clamps the
size to the max value.
Also remove buffer_size_add_clamp(), it is no longer needed.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Colin Cross <ccross@android.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'node' struct member is unused, so remove it.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a few sparse warnings, and improve whitespace.
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This changes the log initialization to be dynamic, but still
at boot time. These changes are a predecessor to implementing
runtime allocation and freeing of logs, to make the Android logger
less hard-coded.
Change from a fixed set of static log structures, to allocation
at init time into a list. Return proper error numbers on log
allocation failure.
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver had headers like big_endian.h, little_endian.h, swab.h
and yet we can throw them all in the trash can and the thing
still builds on x86-64 and ppc, just by deleting the references
to the deleted files.
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
This driver should not be carrying around ancient copies of
headers like <linux/ip.h> for its own use. Mapping it onto
the mainline one uncovers no build issues.
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
This driver should not be carrying around ancient copies of
headers like <linux/if_ether.h> for its own use. Mapping it
onto the mainline one uncovers no build issues.
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
the SENSE_TYPE_FORMAT_IN_PROGRESS was checked by rts51x_scsi.c
but never set.
Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
module parametr needs_remote_wakeup sets
option->needs_remote_wakeup and
rts51x->pusb_intf->needs_remote_wakeup
the second may be used, the first one is never used
Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lars-Peter Clausen