Fix bug
$ arecord -Dplughw -c2
Recording WAVE 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Stereo
arecord: set_params:1116: Unable to install hw params:
ACCESS: RW_INTERLEAVED
FORMAT: U8
SUBFORMAT: STD
SAMPLE_BITS: 8
FRAME_BITS: 16
CHANNELS: 2
[...]
Root cause is, the driver is reporting 2-channel capture capability
that is not supported by the MRST hardware. So the plughw plugin
end up requesting 2-channel capture which fails.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When "aplay test.wav", if we "ctrl+z" to suspend it, the last piece of
sound will be played endlessly. So we need make sure the drop_stream
is called in such a case.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Without this patch, the change of output/input device can't be reflected
correctly. The mismatch reflects insane design, and should be fixed when
switching to the ASoC framework.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The old policy will not enable MIC2BIAS on Moorstown platform
by default, it's only enabled when the user selects HS_MIC as input source.
Therefore when user selects DMIC and then inserts the jack,
no interrupt will be generated to notify the driver about the
jack insertion event and to take action to auto mute the speaker.
The new policy will enable this bit by default,
then no matter what the output device is, an interrupt will be generated.
This behaviour is more likely what a user expects.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When detected a Jack event, Audio sound routes between internal speaker
and headphone/headset automatically.
Signed-off-by: xingchao <xingchao.wang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We may need to make some of this board specific eventually
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We may need to make some of this board specific eventually.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In order to make jack detection behave properly, we have to set
the de-bounce time, otherwise, some weird events happens:
e.g. no plug-out event seen.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the below issues w.r.t jack implementation
a) The current jack implementation in driver is implemented
in intelmid.c. It has moved to vendor files for better managebility
b) Cleaned up jack reporting per upstream comments
c) Implemented jack for msic, added code to read adc and deduce jack
type based on mic bias
d) Support detection of american headset
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
[Corrections]
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds support for configuring and routing the
DMICs (assigned HW route to DMICs)
Signed-off-by: Sitanshu Nanavati <sitanshu.nanavati@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds new IOCTL for application interface.
Using parameter tuning IOCTL, application can fine
tune the audio firmware for it's requirement.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds the support for lineout. The
lineout input can be selected as any input channel
by using a new alsa mixer kcontrol.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The irq for audio is shared, so when device is supended driver should
not the read register and ignore the interrupt.
This patch ignores interrupts when device is suspended.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The current driver remove was erroneous and causes
errors when unloading or loading second time
This patch fixes both of these issues
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds power optimization for the msic codec and ensure
codec is completely powered off when codec is idle.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add several include files to fix the below compile error.
drivers/staging/intel_sst/intelmid.c: In function ‘snd_intelmad_sst_register’:
drivers/staging/intel_sst/intelmid.c:805:2: error: ‘sst_drv_ctx’ undeclared (first use in this function)
drivers/staging/intel_sst/intelmid.c:805:2: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
During suspend and runtime_suspend audio dsp will be in D3 state
and will loose its context.
This patch adds support in driver to save the dsp context
and restore this context during resume
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
register_sst_card is used in ASoC code with field `scard_ops` being NULL.
Without this patch, there will be NULL dereference.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Don't use "SUCCESS" as a macro name. This collides with SCSI's macro
of the same name, but with a different value:
drivers/staging/keucr/smcommon.h:9:9: warning: preprocessor token SUCCESS redefined
include/scsi/scsi.h:463:9: this was the original definition
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eliminate sparse warnings in ms.c:
drivers/staging/keucr/ms.c:28:58: warning: right shift by bigger than source value
drivers/staging/keucr/ms.c:31:58: warning: right shift by bigger than source value
drivers/staging/keucr/ms.c:789:59: warning: cast truncates bits from constant value (ffffff7f becomes 7f)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make lots of functions and data static (fixes sparse warnings).
Fix 5 functions to use ANSI format for function parameters (fixes
sparse warnings).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the jr3_pci.c file that fixes up a brace warning
found by the checkpatch.pl tool
Signed-off-by: Stephane Pajot <pajot.stephane@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The error path from gtt_alloc returns NULL not a ptr error. The underlying
fail is caused by a bug in the size calculation. With these two fixed it
passes kmstest, although it's not really doing anything useful yet.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Route everything via the proper DRM layer calls. This fixes the crash in
plymouth and is also necessary to begin supporting libkms.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Patch "[59807ce] local used function made static" introduced a new
checkpatch warning which is fixed with this patch.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
wlc_phy_compute_dB converts absolute power value to dB implementing
a fixed point calculation for 10*log10(x). It does this by determining
the most significant bit for value x. This can be done using the fls()
bit operation, which has arch specific and possibly more efficient
implementation.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver code had its own implementation for fixed point square root
calculation, but such a function is already available in the linux
kernel so the driver implementation has been removed using the kernel
function.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The function wlc_phy_qdiv_roundup() was not used and has been
removed.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The function wlc_aggregatable is used by wl_mac80211.c. The prototype
of the function was placed in include file wlc_scb.h but the interface
for wl_mac80211.c to other driver functions is to be placed in wlc_pub.h.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In wlc_alloc.c function for setting ID field in struct wlc_bsscfg
was only used locally. It has been made static and removed from
header file.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The functions gitvar() and getintvar() are only used by brcmsmac, so move them
out of the bcmutils.c file, which is shared by both brcmsmac and brcmfmac.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The get_flash_nvram() function is unused, so remove it.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No include files are needed from the util directory, so remove that directory
from the include path.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A number of files in the util subdir are only used by the brcmsmac driver.
Move those files into the brcmsmac subdir instead, and do the necessary
Makefile updates to get the files from the new location.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the pci_core.h header file from util to include subdir, in preparation for
other moves and cleanup.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This include file is no longer needed.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The cis_hnbuvars structure is completely unused, so it can be deleted.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The softmac and fullmac drivers can use the same implementation of
pktq_flush(), so remove the unnecessary version.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Several code path in the wl_ops_bss_info_changed() callback were not
using the perimeter lock. This gives potential of raise conditions
so lock/unlock calls have been added.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch implements dynamic framebuffer mode setting.
Previous code works with mode setting in a hard code way. Previous hard
code configuration is used as default configuration if dynamic mode
setting or boot mode setting (via sm712vga_setup) is not used.
Tested with SM712 supporting 1024x600x16 as default hardware resolution.
Changes:
- Implement fb_check_var and fb_set_par callbacks
- Remove __maybe_unused decorator in function being used (sm712vga_setup)
- Minor cleanup on initialization structs related with mode settings
- Updated author copyright
- Updated TODO file
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Modify description and email address for usbip_common_mod; export
module version number; and modify __init messages slightly.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Also, removes the one-line comments that were associated with some of
the dividers because they provided no additional information.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For consistency, a break statement is added to all default cases that
do not jump to a label.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix a few alignment issues and remove extraneous lines.
Use ternary operator for pdup->base.direction assignment.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix a few alignment issues and remove extraneous lines.
Add braces to else clause.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
