This completes the clean up all the non Medfield C files to the point where
checkpatch approves of them barring some silly 80 column whining.
The Medfield stuff is still in a lot of flux but the rest is now ready for
general tidy and review.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's been stagnant for a while with out much forward progress for a
variety of different reasons. So remove it for now. It can be reverted
at any time if development picks back up again.
Acked-by: David Cross <odc@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is version 3 of an update to zcache, incorporating feedback from the list.
This patch adds support to the in-kernel transcendent memory ("tmem") code
and the zcache driver for multiple clients, which will be needed for both
RAMster and KVM support. It also adds additional tmem callbacks to support
RAMster and corresponding no-op stubs in the zcache driver. In v2, I've
also taken the liberty of adding some additional sysfs variables to
both surface information and allow policy control. Those experimenting
with zcache should find them useful. V3 clarifies some code walking
and declaring arrays.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v3: error27@gmail.com: fix array bounds/walking]
[v2: konrad.wilk@oracle.com: fix bools, add check for NULL, fix a comment]
[v2: sjenning@linux.vnet.ibm.com: add info/tunables for poor compression]
[v2: marcusklemm@googlemail.com: add tunable for max persistent pages]
Acked-by: Dan Carpenter <error27@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: linux-mm@kvack.org
Cc: kvm@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Merge ENE UB6250 MS card codes from keucr to drivers/usb/storage/ene_ub6250.c.
Signed-off-by: Cho, Yu-Chen <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the driver's get_sensor_data() interfaces and replace them with
iio_chan_spec channels. This converts 4 files to the new framework.
Driver ABI change: The intensity_infrared_raw file is now intensity_ir_raw.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add "proximity" to the iio_chan_type_name_spec_shared string list to
support proximity sensors.
Now this list fully matches the declared iio_chan_type enums.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This makes comparison between the iio_chan_type_name_spec_shared strings
and the iio_chan_type enums easier.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The I2C clientdata is set to indio_dev instead of chip as of a couple weeks ago.
Correct the calls to i2c_get_clientdata() accordingly.
Otherwise the driver fails to initialize.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the rtd520.c file that fixes up a printk warning found by the checkpatch.pl tool
Signed-off-by: Ravishankr <ravishakarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the rtd520.c file that fixes up a warning: line over 80 character found by the checkpatch.pl tool
Signed-off-by: Ravishankar <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The third parameter of module_param is supposed to represent sysfs
file permissions. A value of "1" makes no sense.
I am changing it to "0" to align with the other module parameters in
this driver.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Cc: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We dereference "buf" on the line before so if it were NULL here we
would have OOPsed earlier. Also list_entry() never returns NULL.
And finally, we handled the situation where the list is empty
earlier in the function.
So this test isn't needed and I've removed it.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The comment at the top of the function states 'we need to initialize all the macstat registers to zero', but not all macstat registers are zeroed. Zero the missing registers.
Tested on an ET-131x device.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I must remember to run checkpatch on 'trivial' patches too...
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial rename of the adapter flags struct member to remove camel case.
Tested on a ET-131x device.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed Makefile to use <modules>-y instead of <modules>-objs
because -objs is deprecated.
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
remove support for OSS. OSS is being deprecated
and it is just plain headache to support both alsa and oss.
Last I broke the compilation when OSS is enabled with the patch
cdaa898b5e
staging/easycap: kill telltale logic
so this fixes also that issue.
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
SST HW on MRST doesn't need to reload the firmware during suspend/resume
cycle, so remove the extra workload. This also fix a bug that the firmware
sample rate can't be modified when there is no active playback/capture
stream.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The status of jack event is compared bitwise:
[in sound/core/jack.c:snd_jack_report()]
for (i = 0; i < ARRAY_SIZE(jack_switch_types); i++) {
int testbit = 1 << i;
if (jack->type & testbit)
input_report_switch(jack->input_dev,
jack_switch_types[i],
status & testbit);
}
So in order to report the correct events, 3 should be passed instead of 1.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change a missed reference to the `list' command, and update the output
from `usbip bind ...' and `usbip list -r ...'
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The remote devices listed are, technically, exportable and not
necessarily exported.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change spacing to provide better indentation for readability.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A bug that I created due to using simply expanding variables in the
makefiles. Although only unexpanded paths are at issue here, I decided
to use recursively expanding variables on all of the parameterized
values.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change and add new usbip_net_ prefix to every function in the network
code for easier identification.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reorganize, rename [for clarity and to remove stub_driver
references], modify output messages, and cleanup coding style;
nevertheless, the actual implementation is pretty much untouched.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix usbip printk format warning for size_t:
drivers/staging/usbip/stub_tx.c:236: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the unioxx5.c file that fixes up a warning found by the checkpatch.pl tool
Signed-off-by: Ravishankar <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the serial2002.c file that fixes up a brace warning found by the checkpatch.pl tool
Signed-off-by: Ravishankar <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the serial2002.c file that fixes up a brace and printk warning found by the checkpatch.pl tool
Signed-off-by: Ravishankar <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
keeping the exit flow in a reverse order then the init flow.
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The list cursor is never NULL in a list_for_each_entry() loop.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We should only cleanup "dsr_info" if it's non-NULL obviously and not
the other way around.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is a comma missing here between the strings so they were
concatenated by mistake.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We are close to having PSB and CDV ready for moving from staging so it's
time to get the polish out.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Otherwise we can't ioremap the gtt and the screen gets garbled.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap reports:
| when both CONFIG_DRM_I915=y and CONFIG_DRM_PSB=y:
| drivers/staging/built-in.o: In function `intel_opregion_init':
| (.text+0x47943): multiple definition of `intel_opregion_init'
| drivers/gpu/built-in.o:(.text+0x17277a): first defined here
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed some stylistic uglies noticed while fixing the previous bug
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove unneeded version.h includes from drivers/staging/gma500/
It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in drivers/staging/gma500/.
This patch removes them.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
[updated for all th file cleanup and movement]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Delete the drivers/staging/tty drivers as no one has wanted to step up
and maintain and fix them. This was discussed in commit
4a6514e6d0 (tty: move obsolete and broken
tty drivers to drivers/staging/tty/)
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox