Commit graph

2620 commits

Author SHA1 Message Date
Artem Bityutskiy
94735ec404 mtd: mtd_blkdevs: fix error path in blktrans_open
The 'blktrans_open()' does not handle possible '__get_mtd_device()' failures
because it does not check the error code. Moreover, the 'dev->tr->open()'
failures are not handled correctly because in this case the function just
goes ahead and gets the mtd device, then returns an error. But Instead, it
should _not_ try to get the mtd device, then it should put back the module
and the kref.

This patch fixes the issue. Note, I only compile-tested it. This patch was
inspired by a bug report about a similar issue in 2.6.34 kernels
sent by Mike Turner <admin@islandsoftware.co.uk> to the MTD mailing list:

http://lists.infradead.org/pipermail/linux-mtd/2011-April/034980.html

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25 01:53:45 +01:00
Hans-Christian Egtvedt
5c39c4c54c mtd: atmel_nand: add missing include of linux/dmaengine.h
Including linux/dmaengine.h fixes the missing definition of the enum
dma_ctrl_flags type used in atmel_nand_dma_op function.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25 01:53:27 +01:00
Jiri Pinkava
c2aad6d658 mtd: nand: remove doubled chip deselection on (un)lock
Chip deselection is already done in nand_release_device. So only
duplicate code.

Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25 01:53:22 +01:00
Jiri Pinkava
ac497c1602 mtd: nand: fix S3C NAND clock stop
Current implementation of s3c2410_nand_select_chip call
clk_disable every time when chip = -1 (de-select). This happend
multiple times even if chip was already de-selected. This causes
disabling clock even if they are already disabled and due to
nature of clock subsytem implementation this causes nand clock
to be disabled and newer enabled again.

Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25 01:53:10 +01:00
Gernot Hoyler
c9ddab25d1 mtd: cmdset_0002: add CFI 1.5 support for S29GL-S
This patch adds CFI 1.5 support for the new Spansion S29GL-S device family.
For details, see the data sheet on the Spansion web site:
http://www.spansion.com/Support/Datasheets/S29GL_128S_01GS_00_02_e.pdf

Signed-off-by: Gernot Hoyler <Gernot.Hoyler@spansion.com>
Acked-by: Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25 01:51:35 +01:00
Roman Tereshonkov
99b17c08bc mtd: onenand: add ecclayout and subpage_sft for non-flex 4KiB page onenand
So as the ecclayout and suppage size for 4KiB page
Flex- and none-Flex OneNAND are different
the new values for none-Flex 4KiB page OneNAND memory are added.

The introduced ecclayout and suppage size are based on specification
4Gib M-die OneNAND Flash (KFM4G16Q4M, KFN8G16Q4M). Rev. 1.3, Apr. 2010
For eccpos we expose only 64 bytes out of 72, for oobfree the spare area
fields marked as "Managed by internal ECC logic for Logical Sector Number area"
are used.

Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25 01:50:42 +01:00
Michal Marek
9b5705a2bd mtd: denali: drop __TIME__ usage
The kernel already prints its build timestamp during boot, no need to
repeat it in random drivers and produce different object files each
time.

Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25 01:50:20 +01:00
Brian Norris
a2f812df0b mtd: nand: dynamic allocation of flash-based BBT structs
It is nicer to dynamically create our badblock patterns than to
statically define them. The nand_create_default_bbt_descr() function
does a sufficient job of handling various bad block scanning options
for either flash-based or non-flash-based BBTs, so we might as well
use the function for both cases.

This patch simplifies and shortens our code (and removes a TODO that
I left a few months ago).

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25 01:50:14 +01:00
Gabor Juhos
9c76b4e531 mtd: m25p80: add support for the MX25L1606E chip
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25 01:47:46 +01:00
Baruch Siach
d178e3e88f mtd: mxc_nand: add support for multiple chips on V21 devices
Do the following to add support for up to 4 chips on V21 devices (i.MX25 and
i.MX35):

* implement .select_chip for V21
* adjust existing NFC_V1_V2_BUF_ADDR writes to take chip select into account
* unlock all chip selects at preset_v1_v2()
* scan up to 4 devices at .probe

This has been tested on i.MX25 with two attached NAND chip (on one die).

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25 01:47:08 +01:00
Linus Torvalds
f50d1d9e8d Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: Make struct pcmcia_device_id const, sound drivers edition
  staging: pcmcia: Convert pcmcia_device_id declarations to const
  pcmcia: Convert pcmcia_device_id declarations to const
  pcmcia: Make declaration and uses of struct pcmcia_device_id const
  pcmcia/sa1100: put sa11x0_pcmcia_hw_init[] to .devinit.data
2011-05-24 13:28:35 -07:00
Linus Torvalds
4d42948035 Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6
* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: switch to dynamic printks
  UBI: turn some macros into static inline
  UBI: improve checking in debugging prints
  UBI: fix typo in a message
  UBI: fix minor stylistic issues
  UBI: use __packed instead of __attribute__((packed))
  UBI: cleanup comments around volume properties
  UBI: re-name set volume properties ioctl
  UBI: make the control character device non-seekable
2011-05-24 11:51:26 -07:00
Russell King
4b60e5f90d Merge branches 'consolidate-clksrc', 'consolidate-flash', 'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate 2011-05-23 18:05:10 +01:00
Marc Zyngier
667f390bee ARM: 6910/1: MTD: physmap: let set_vpp() pass a platform_device instead of a map_info
The set_vpp() method provided by physmap passes a map_info back to
the platform code, which has little relevance as far as the platform
is concerned (this parameter is completely unused).

Instead, pass the platform_device, which can be used in the pismo
driver to retrieve some important information in a nicer way, instead
of the hack that was in place.

The empty set_vpp function in board-at572d940hf_ek.c is left untouched,
as the board/SoC is scheduled for removal.

Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-20 22:27:34 +01:00
Marc Zyngier
adf0040096 ARM: 6906/1: MTD: Remove integrator-flash
As there is now no in-tree user of integrator-flash, remove
it completely.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-20 22:27:20 +01:00
Marc Zyngier
b7281ca2a4 ARM: 6904/1: MTD: Add integrator-flash feature to physmap
In the process of moving platforms away from integrator-flash
(aka armflash), add to physmap the few features that make
armflash unique:

- optionnal probing for the AFS partition type
- init() and exit() methods, used by Integrator to control
  write access to the various onboard programmable components

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-20 22:26:53 +01:00
Artem Bityutskiy
ab50ff6847 UBI: switch to dynamic printks
Remove custom dynamic prints and the module parameter to toggle them and use
the generic kernel dynamic printk infrastructure.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20 08:30:34 +03:00
Artem Bityutskiy
ebfce01a6d UBI: turn some macros into static inline
Similarly as we have done for UBIFS in
1dcffad741, turn the debugging macros into static
inline functions, for the same reasons: to avoid gcc 4.5 warnings.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20 08:30:34 +03:00
Artem Bityutskiy
3802243a18 UBI: improve checking in debugging prints
When debugging is disabled, define debugging prints as if (0) printk() to make
sure that the compiler still the format string in debugging messages even if
debugging is disabled.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20 08:30:34 +03:00
Manuel Lauss
b7f720d68c MIPS: Alchemy: Clean up GPIO registers and accessors
remove au_readl/au_writel, remove the predefined GPIO1/2 KSEG1 register
addresses and fix the fallout in all boards and drivers.

This also fixes a bug in the mtx-1_wdt driver which was introduced by
commit 6ea8115bb6
("Convert mtx1 wdt to be a platform device and use generic GPIO API")
before this patch mtx-1_wdt only modified GPIO215, the patch then
used the gpio resource information as bit index into the GPIO2 register
but the conversion to the GPIO API didn't realize that.
With this patch the drivers original behaviour is restored and GPIO15
is left alone.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Florian Fainelli <florian@openwrt.org>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: linux-watchdog@vger.kernel.org
Cc: Wim Van Sebroeck <wim@iguana.be>
Patchwork: https://patchwork.linux-mips.org/patch/2381/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19 09:55:46 +01:00
John Crispin
3c5447390c MIPS: Lantiq: Add NOR flash support
This patch adds the driver/map for NOR devices attached to the SoC via the
External Bus Unit (EBU).

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-mtd@lists.infradead.org
Acked-by: Artem Bityutskiy <dedekind1@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/2285/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:42 +01:00
Grant Likely
b1608d69cb drivercore: revert addition of of_match to struct device
Commit b826291c, "drivercore/dt: add a match table pointer to struct
device" added an of_match pointer to struct device to cache the
of_match_table entry discovered at driver match time.  This was unsafe
because matching is not an atomic operation with probing a driver.  If
two or more drivers are attempted to be matched to a driver at the
same time, then the cached matching entry pointer could get
overwritten.

This patch reverts the of_match cache pointer and reworks all users to
call of_match_device() directly instead.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-18 12:32:23 -06:00
Joe Perches
25f8f54f6e pcmcia: Convert pcmcia_device_id declarations to const
Saves about 50KB of data.

Old/new size of all objects:
   text	   data	    bss	    dec	    hex	filename
 563015	  80096	 130684	 773795	  bcea3	(TOTALS)
 610916	  32256	 130632	 773804	  bceac	(TOTALS)

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> (for drivers/net/can/softing/softing_cs.c)
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-05-06 07:46:22 +02:00
Lucas De Marchi
e9c549998d Revert wrong fixes for common misspellings
These changes were incorrectly fixed by codespell. They were now
manually corrected.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-04-26 23:31:11 -07:00
Artem Bityutskiy
1426414431 UBI: fix typo in a message
When a PEB passes the torture test, UBI prints
"do not mark it a bad", but should print "do not mark it as bad".
This patch corrects the typo.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-14 13:38:59 +03:00
Artem Bityutskiy
feddbb34eb UBI: fix minor stylistic issues
Fix checkpatch.pl errors and warnings:

* space before tab
* line over 80 characters
* include linux/ioctl.h instead of asm/ioctl.h

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-14 11:34:41 +03:00
Artem Bityutskiy
3627924acf UBI: use __packed instead of __attribute__((packed))
There was an attempt to standartize various "__attribute__" and
other macros in order to have potentially portable and more
consistent code, see commit 82ddcb0405.

Note, that commit refers Rober Love's blog post, but the URL
is broken, the valid URL is:
http://blog.rlove.org/2005/10/with-little-help-from-your-compiler.html

Moreover, nowadays checkpatch.pl warns about using
__attribute__((packed)):

"WARNING: __packed is preferred over __attribute__((packed))"

It is not a big deal for UBI to use __packed, so let's do it.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-14 11:34:41 +03:00
Artem Bityutskiy
6748482f41 UBI: re-name set volume properties ioctl
Rename the ioctl which sets volume properties from 'UBI_IOCSETPROP' to
'UBI_IOCSETVOLPROP' to reflect the fact that this ioctl is about volume
properties, not device properties. This is also consistent with the
other volume ioctl name - 'UBI_IOCVOLUP'.

The main motivation for the re-name, however, is that we are going
to introduce the per-UBI device "set properties" ioctl, so we need
good and logical naming.

At the same time, re-name the "set volume properties request" data
structure from 'struct ubi_set_prop_req' to
'struct ubi_set_vol_prop_req'.

And re-name 'UBI_PROP_DIRECT_WRITE' to 'UBI_VOL_PROP_DIRECT_WRITE'.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-14 11:34:40 +03:00
Artem Bityutskiy
e10b376e98 UBI: make the control character device non-seekable
This patch makes the UBI control device (/dev/ubi_ctrl) non-seekable.
The seek operation does is not applicable to this file, so it is
cleaner to explicitly return error (which the added 'no_llseek()')
does than trying to change the position (which the removed
'default_llseek()' does).

This is an API break, but the only known user of this interface is
mtd-utils which does not need the seeking functionality. And any app
which relies on this is broken, but I'm not aware of such apps.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-14 11:34:40 +03:00
Linus Torvalds
510ec7bc3b Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
  mtd: atmel_nand: use CPU I/O when buffer is in vmalloc(ed) region
  mtd: atmel_nand: modify test case for using DMA operations
  mtd: atmel_nand: fix support for CPUs that do not support DMA access
  mtd: atmel_nand: trivial: change DMA usage information trace
  mtd: mtdswap: fix printk format warning
2011-04-09 13:23:50 -07:00
Linus Torvalds
ccfeef0ff7 Merge branch 'for-linus' of git://git.infradead.org/ubifs-2.6
* 'for-linus' of git://git.infradead.org/ubifs-2.6:
  UBI: do not select KALLSYMS_ALL
  UBI: do not compare array with NULL
  UBI: check if we are in RO mode in the erase routine
  UBIFS: fix debugging failure in dbg_check_space_info
  UBIFS: fix error path in dbg_debugfs_init_fs
  UBIFS: unify error path dbg_debugfs_init_fs
  UBIFS: do not select KALLSYMS_ALL
  UBIFS: fix assertion warnings
  UBIFS: fix oops on error path in read_pnode
  UBIFS: do not read flash unnecessarily
2011-04-07 11:31:03 -07:00
Artem Bityutskiy
6bef0b6747 UBI: do not select KALLSYMS_ALL
All UBI needs is to make sure we stacktraces when UBI debugging
is enabled. It is enough to select KALLSYMS for this, KALLSYMS_ALL
is not necessary.

And the current Kconfig line we have:

select KALLSYMS_ALL if KALLSYMS && DEBUG_KERNEL

is just too complex to be sane and right. But this "if" part there
is needed to prevent "unmet direct dependency" warnings, because
KALLSYMS_ALL depends on KALLSYMS and DEBUG_KERNEL, so we cannot
just select KALLSYMS_ALL.

Anyway, this feels messy, and we do not seem to really need KALLSYMS_ALL,
so select KALLSYMS instead.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
2011-04-05 11:08:59 +03:00
Artem Bityutskiy
6e5133cc75 UBI: do not compare array with NULL
Coverity spotted that UBI debugging code tries to compare
an array and NULL, which obviously makes little sense. Kill
this check.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-05 11:08:58 +03:00
Artem Bityutskiy
3efe509070 UBI: check if we are in RO mode in the erase routine
'do_sync_erase()' has to check whether we are in R/O mode before
erasing the PEB. This patch adds the check and while on it, adds an
assertion which validates the 'pnum' argument, as well as removes
a check which is always true because it has already been done
few lines before.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-05 11:08:58 +03:00
Hong Xu
80b4f81a49 mtd: atmel_nand: use CPU I/O when buffer is in vmalloc(ed) region
The previous way of dealing with vmalloc(ed) region by walking
though the pages can not work well actually. We just fall back
to CPU I/O when the buffer address is higher than `high_memory'.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-01 17:25:24 +03:00
Nicolas Ferre
9d51567e47 mtd: atmel_nand: modify test case for using DMA operations
We have better performances not using DMA for oob operations.
Modify size test so that it is using DMA for size greater than oobsize.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-01 16:44:32 +03:00
Hong Xu
cb457a4ddd mtd: atmel_nand: fix support for CPUs that do not support DMA access
use_dma was always "1" even if the CPU does not support DMA

Tested on AT91SAM9261EK by Jean-Christophe PLAGNIOL-VILLARD

Reported-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-01 16:44:32 +03:00
Nicolas Ferre
042bc9c0c4 mtd: atmel_nand: trivial: change DMA usage information trace
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-01 16:44:32 +03:00
Randy Dunlap
2130ad32a0 mtd: mtdswap: fix printk format warning
The number is actually a sizeof(), so using %zu for it builds
cleanly on 32-bit or 64-bit.

drivers/mtd/mtdswap.c:1456: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-01 16:44:31 +03:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Artem Bityutskiy
7bf7e370d5 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus-1
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6: (9356 commits)
  [media] rc: update for bitop name changes
  fs: simplify iget & friends
  fs: pull inode->i_lock up out of writeback_single_inode
  fs: rename inode_lock to inode_hash_lock
  fs: move i_wb_list out from under inode_lock
  fs: move i_sb_list out from under inode_lock
  fs: remove inode_lock from iput_final and prune_icache
  fs: Lock the inode LRU list separately
  fs: factor inode disposal
  fs: protect inode->i_state with inode->i_lock
  lib, arch: add filter argument to show_mem and fix private implementations
  SLUB: Write to per cpu data when allocating it
  slub: Fix debugobjects with lockless fastpath
  autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd()
  autofs4 - remove autofs4_lock
  autofs4 - fix d_manage() return on rcu-walk
  autofs4 - fix autofs4_expire_indirect() traversal
  autofs4 - fix dentry leak in autofs4_expire_direct()
  autofs4 - reinstate last used update on access
  vfs - check non-mountpoint dentry might block in __follow_mount_rcu()
  ...

NOTE!

This merge commit was created to fix compilation error. The block
tree was merged upstream and removed the 'elv_queue_empty()'
function which the new 'mtdswap' driver is using. So a simple
merge of the mtd tree with upstream does not compile. And the
mtd tree has already be published, so re-basing it is not an option.

To fix this unfortunate situation, I had to merge upstream into the
mtd-2.6.git tree without committing, put the fixup patch on top of
this, and then commit this. The result is that we do not have commits
which do not compile.

In other words, this merge commit "merges" 3 things: the MTD tree, the
upstream tree, and the fixup patch.
2011-03-25 17:41:20 +02:00
Artem Bityutskiy
68b1a1e786 mtd: mtdswap: fix compilation warning
Fix the following compilation warning:

drivers/mtd/mtdswap.c: In function ‘mtdswap_pick_gc_eblk’:
drivers/mtd/mtdswap.c:859: warning: ‘idx’ may be used uninitialized in this function
drivers/mtd/mtdswap.c:859: note: ‘idx’ was declared here

Initialize idx to -1 because this value means "no tree choosen".

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-25 17:10:16 +02:00
Yang Ruirui
e21fa86ad0 mtdswap: kill strict error handling option
As Artem Bityutskiy suggested: this option is controversial, as we
do not really have any prove it is useful. And it is too much to have
it as a config parameter. So, better kill it and let the real mtdswap
users decide whether it is needed or not.

Signed-off-by: Yang Ruirui<ruirui.r.yang@tieto.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-25 17:04:18 +02:00
Linus Torvalds
fdc0ad80a4 Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6
* 'for-linus' of git://git.infradead.org/ubi-2.6:
  UBIFS: fix assertion warning and refine comments
  UBIFS: kill CONFIG_UBIFS_FS_DEBUG_CHKS
  UBIFS: use GFP_NOFS properly
  UBI: use GFP_NOFS properly
2011-03-24 08:22:34 -07:00
Artem Bityutskiy
3d46b316bc UBI: use GFP_NOFS properly
This patch fixes a brown-paperbag bug which was introduced by me:
I used incorrect "GFP_KERNEL | GFP_NOFS" allocation flags to make
sure my allocations do not cause write-back. But the correct form
is "GFP_NOFS".

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-24 16:09:56 +02:00
Andres Salomon
944dc03551 tmio: Silence warnings introduced by mfd changes
This silences warnings such as

drivers/video/tmiofb.c: In function 'tmiofb_hw_init':
drivers/video/tmiofb.c:270: warning: initialization discards qualifiers from pointer target type

These were added by me in commit 2a79bb1d.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:42:01 +01:00
Andres Salomon
d9d01f4b26 mtd: Use mfd_data instead of driver_data for tmio_nand
Use mfd_data for passing information from mfd drivers to mfd
clients.  The mfd_cell's driver_data field is being phased out.

Clients that were using driver_data now access .mfd_data
via mfd_get_data().  This changes tmio-nand only; mfd drivers with
other cells are not modified.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:41:57 +01:00
Andres Salomon
a23090ada4 mfd: mfd_cell is now implicitly available to t7166xb drivers
No need to explicitly set the cell's platform_data/data_size.

Modify clients to use mfd_get_cell helper function instead of
accessing platform_data directly.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:41:52 +01:00
Linus Torvalds
8f627a8a88 Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
* 'linux-next' of git://git.infradead.org/ubifs-2.6: (25 commits)
  UBIFS: clean-up commentaries
  UBIFS: save 128KiB or more RAM
  UBIFS: allocate orphans scan buffer on demand
  UBIFS: allocate lpt dump buffer on demand
  UBIFS: allocate ltab checking buffer on demand
  UBIFS: allocate scanning buffer on demand
  UBIFS: allocate dump buffer on demand
  UBIFS: do not check data crc by default
  UBIFS: simplify UBIFS Kconfig menu
  UBIFS: print max. index node size
  UBIFS: handle allocation failures in UBIFS write path
  UBIFS: use max_write_size during recovery
  UBIFS: use max_write_size for write-buffers
  UBIFS: introduce write-buffer size field
  UBI: incorporate LEB offset information
  UBIFS: incorporate maximum write size
  UBI: provide LEB offset information
  UBI: incorporate maximum write size
  UBIFS: fix LEB number in printk
  UBIFS: restrict world-writable debugfs files
  ...
2011-03-18 10:50:27 -07:00
Linus Torvalds
fd57ed0219 Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6
* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: make tests modes dynamic
  UBI: make self-checks dynamic
  UBI: make debugging messages dynamic
  UBI: remove UBI_IO_DEBUG macro
  UBI: kill debugging buffer
  UBI: allocate erase checking buffer on demand
  UBI: allocate write checking buffer on demand
  UBI: always re-read in case of read failures
  UBI: cleanup comments about corrupted PEBs
  UBI: add slab cache for ubi_scan_leb objects
  UBI: use raw mtd read function in debugging code
  UBI: try to reveal buggy MTD drivers
  UBI: add a commentary about allocating VID header buffer on stack
  UBI: cleanup LEB start calculations
  UBI: fix NOR erase preparation quirk
2011-03-18 10:50:02 -07:00
Linus Torvalds
e16b396ce3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
  doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
  Update cpuset info & webiste for cgroups
  dcdbas: force SMI to happen when expected
  arch/arm/Kconfig: remove one to many l's in the word.
  asm-generic/user.h: Fix spelling in comment
  drm: fix printk typo 'sracth'
  Remove one to many n's in a word
  Documentation/filesystems/romfs.txt: fixing link to genromfs
  drivers:scsi Change printk typo initate -> initiate
  serial, pch uart: Remove duplicate inclusion of linux/pci.h header
  fs/eventpoll.c: fix spelling
  mm: Fix out-of-date comments which refers non-existent functions
  drm: Fix printk typo 'failled'
  coh901318.c: Change initate to initiate.
  mbox-db5500.c Change initate to initiate.
  edac: correct i82975x error-info reported
  edac: correct i82975x mci initialisation
  edac: correct commented info
  fs: update comments to point correct document
  target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
  ...

Trivial conflict in fs/eventpoll.c (spelling vs addition)
2011-03-18 10:37:40 -07:00
Linus Torvalds
0df0914d41 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h
2011-03-17 19:28:15 -07:00
Linus Torvalds
411f5c7a50 Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits)
  davinci: DM644x EVM: register MUSB device earlier
  davinci: add spi devices on tnetv107x evm
  davinci: add ssp config for tnetv107x evm board
  davinci: add tnetv107x ssp platform device
  spi: add ti-ssp spi master driver
  mfd: add driver for sequencer serial port
  ARM: EXYNOS4: Implement Clock gating for System MMU
  ARM: EXYNOS4: Enhancement of System MMU driver
  ARM: EXYNOS4: Add support for gpio interrupts
  ARM: S5P: Add function to register gpio interrupt bank data
  ARM: S5P: Cleanup S5P gpio interrupt code
  ARM: EXYNOS4: Add missing GPYx banks
  ARM: S3C64XX: Fix section mismatch from cpufreq init
  ARM: EXYNOS4: Add keypad device to the SMDKV310
  ARM: EXYNOS4: Update clocks for keypad
  ARM: EXYNOS4: Update keypad base address
  ARM: EXYNOS4: Add keypad device helpers
  ARM: EXYNOS4: Add support for SATA on ARMLEX4210
  plat-nomadik: make GPIO interrupts work with cpuidle ApSleep
  mach-u300: define a dummy filter function for coh901318
  ...

Fix up various conflicts in
 - arch/arm/mach-exynos4/cpufreq.c
 - arch/arm/mach-mxs/gpio.c
 - drivers/net/Kconfig
 - drivers/tty/serial/Kconfig
 - drivers/tty/serial/Makefile
 - drivers/usb/gadget/fsl_mxc_udc.c
 - drivers/video/Kconfig
2011-03-17 19:08:06 -07:00
Linus Torvalds
4c5811bf46 Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits)
  tty: serial: altera_jtaguart: Add device tree support
  tty: serial: altera_uart: Add devicetree support
  dt: eliminate of_platform_driver shim code
  dt: Eliminate of_platform_{,un}register_driver
  dt/serial: Eliminate users of of_platform_{,un}register_driver
  dt/usb: Eliminate users of of_platform_{,un}register_driver
  dt/video: Eliminate users of of_platform_{,un}register_driver
  dt/net: Eliminate users of of_platform_{,un}register_driver
  dt/sound: Eliminate users of of_platform_{,un}register_driver
  dt/spi: Eliminate users of of_platform_{,un}register_driver
  dt: uartlite: merge platform and of_platform driver bindings
  dt: xilinx_hwicap: merge platform and of_platform driver bindings
  ipmi: convert OF driver to platform driver
  leds/leds-gpio: merge platform_driver with of_platform_driver
  dt/sparc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: move of_bus_type infrastructure to ibmebus
  drivercore/dt: add a match table pointer to struct device
  dt: Typo fix.
  altera_ps2: Add devicetree support
  ...
2011-03-16 17:28:10 -07:00
Artem Bityutskiy
28237e4583 UBI: make tests modes dynamic
Similarly to the debugging checks and message, make the test modes
be dynamically selected via the "debug_tsts" module parameter or
via the "/sys/module/ubi/parameters/debug_tsts" sysfs file. This
is consistent with UBIFS as well.

And now, since all the Kconfig knobs became dynamic, we can remove
the Kconfig.debug file completely.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16 13:50:17 +02:00
Artem Bityutskiy
92d124f531 UBI: make self-checks dynamic
This patch adds a possibility to dynamically switch UBI self-checks
on and off, instead of toggling them compile-time from the configuration
menu. This is much more flexible, and consistent with UBIFS, and this
also simplifies UBI Kconfig menu and the code.

This patch introduces two levels of self-checks - general, which
includes all self-checks which are relatively fast, and I/O, which
includes write-verify checks and erase-verify checks, which are
relatively slow and involve flash I/O.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16 13:50:16 +02:00
Artem Bityutskiy
b342efd4a4 UBI: make debugging messages dynamic
This patch adds a possibility to dynamically select UBI debugging
messages, instead of selecting them compile-time from the configuration
menu. This is much more flexible, and consistent with UBIFS, and this
also simplifies UBI Kconfig menu and the code.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16 13:50:16 +02:00
Artem Bityutskiy
6f9fdf62db UBI: remove UBI_IO_DEBUG macro
This additional little macro is used to print a bit more messages
while scanning the media. However, we have the 'dbg_bld()' macro
for this, so we better us 'dbg_bld()' and kill UBI_IO_DEBUG. This
simplifies the code a tiny bit.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16 13:50:16 +02:00
Artem Bityutskiy
6edb979395 UBI: kill debugging buffer
This patch kills the 'ubi->dbg_peb_buf' debugging buffer and the
associated mutex, because all users of this buffer are now gone.
We are killing this buffer because we are going to switch to
dynamic debugging control, just like in UBIFS, which means that
CONFIG_MTD_UBI_DEBUG_PARANOID will be removed. In this case we'd
end up always allocating 'ubi->dbg_peb_buf', which is rather large
(128KiB or more), and this would be wasteful. Thus, we are just
killing it.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16 13:50:16 +02:00
Artem Bityutskiy
332873d60b UBI: allocate erase checking buffer on demand
Instead of using pre-allocated 'ubi->dbg_peb_buf' buffer in
'ubi_dbg_check_all_ff()', dynamically allocate it when needed. The
intend is to get rid of the pre-allocated 'ubi->dbg_peb_buf' buffer
completely. And the need for this arises because we want to change
to dynamic debugging control instead of compile-time control, i.e.,
we are going to kill the CONFIG_MTD_UBI_DEBUG_PARANOID Kconfig
option, which would mean that 'ubi->dbg_peb_buf' is always allocated,
which would be wasteful.

Thus, we are getting rid of 'ubi->dbg_peb_buf', and this is a
preparation for that.

signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16 13:50:16 +02:00
Artem Bityutskiy
a75867432a UBI: allocate write checking buffer on demand
Instead of using pre-allocated 'ubi->dbg_peb_buf' buffer in
'ubi_dbg_check_write()', dynamically allocate it when needed. The
intend is to get rid of the pre-allocated 'ubi->dbg_peb_buf' buffer
completely. And the need for this arises because we want to change
to dynamic debugging control instead of compile-time control, i.e.,
we are going to kill the CONFIG_MTD_UBI_DEBUG_PARANOID Kconfig
option, which would mean that 'ubi->dbg_peb_buf' is always allocated,
which would be wasteful.

Thus, we are getting rid of 'ubi->dbg_peb_buf', and this is a
preparation for that.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-16 13:50:16 +02:00
Russell King
9ced9f03d1 Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable
Conflicts:
	arch/arm/mm/Kconfig
2011-03-15 16:32:47 +00:00
Linus Torvalds
e8444a3e3b Merge git://git.infradead.org/users/dwmw2/mtd-2.6.38
* git://git.infradead.org/users/dwmw2/mtd-2.6.38:
  mtd: add "platform:" prefix for platform modalias
  mtd: mtd_blkdevs: fix double free on error path
  mtd: amd76xrom: fix oops at boot when resources are not available
  mtd: fix race in cfi_cmdset_0001 driver
  mtd: jedec_probe: initialise make sector erase command variable
  mtd: jedec_probe: Change variable name from cfi_p to cfi
2011-03-13 15:56:22 -07:00
Ivan Djelic
fc2ff592b5 mtd: nand: enable software BCH ECC in nand simulator
This patch adds option 'bch' to nandsim, which can be used to enable
software BCH ECC (introduced in previous patches) and select BCH error
correction capability.

Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 17:49:31 +00:00
Ivan Djelic
193bd40026 mtd: nand: add software BCH ECC support
This patch adds software BCH ECC support to mtd, in order to handle recent
NAND device ecc requirements (4 bits or more).

It does so by adding a new ecc mode (NAND_ECC_SOFT_BCH) for use by board
drivers, and a new Kconfig option to enable BCH support. It relies on the
generic BCH library introduced in a previous patch.

When a board driver uses mode NAND_ECC_SOFT_BCH, it should also set fields
chip->ecc.size and chip->ecc.bytes to select BCH ecc data size and required
error correction capability. See nand_bch_init() documentation for details.

It has been tested on the following platforms using mtd-utils, UBI and
UBIFS: x86 (with nandsim), arm926ejs.

Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 17:49:08 +00:00
David Woodhouse
89d8d32060 mtd: fix printf format warnings, mostly lack of %zd for size_t, in mtdswap
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 15:17:41 +00:00
Xiaochen Wang
629286b956 mtd: sm_rtl: check kmalloc return value
Because malloc/kzalloc may fail, we should check kmalloc/kzalloc return value
 in sm_create_sysfs_attributes(), mtd/sm_rtl.c and do error handling.
Meanwhile, we should check sm_create_sysfs_attributes return value.

Signed-off-by: Xiaochen Wang <wangxiaochen0@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:27:10 +00:00
Steffen Sledz
1065cda8a1 mtd: cfi: add support for AMIC flashes (e.g. A29L160AT)
Signed-off-by: Steffen Sledz <sledz@dresearch.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:27:01 +00:00
Baruch Siach
2c1c5f1994 mtd: mxc_nand: fix OOB corruption when page size > 2KiB
When page size is 4KiB, ecc.total is set to 8*9, and this causes
nand_write_page_hwecc() to read past the initialized part of the eccpos array,
which corrupts chip->oob_poi with bogus values from ecc_calc.

Fix this by creating a proper nand_ecclayout for 4KiB flashes.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:23:48 +00:00
Sandeep Paulraj
f43272c482 mtd: DaVinci: Removed header file that is not required
The DaVinci NAND driver was including the mach-types.h header
file.
This prevented the DaVinci NAND driver from getting used
in a DSP only device. The linux port on c6x devices can make
use of the same driver and does not define a corresponding
header file.

This header file was required in the driver because earlier there was code
dependent on a machine_* check. This piece of code has now been factored out
and is in arch/arm/mach-davinci/aemif.c

Thus removing the header file is harmless

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:23:36 +00:00
Lei Wen
4332c11686 mtd: pxa3xx_nand: clean the keep configure code
Use nand_scan_ident to unify the need of mtd member initilization
for both normal detection and keep configuration method.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:51 +00:00
Lei Wen
401e67e225 mtd: pxa3xx_nand: mtd scan id process could be defined by driver itself
Different NAND driver may require its unique detection. For pxa3xx_nand,
it use its self id database to get the necessary info.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:51 +00:00
Lei Wen
4eb2da8994 mtd: pxa3xx_nand: unify prepare command
Make the interface simpler which could make both debug
and enhancement easier.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:50 +00:00
Lei Wen
38caf7f68e mtd: pxa3xx_nand: discard wait_for_event,write_cmd,__readid function
Since we have rework the irq process, we don't need additional
delay in wait_for_event. Also write_cmd and __readid is also
discarded for the same reason.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:50 +00:00
Lei Wen
f8155a404d mtd: pxa3xx_nand: rework irq logic
Enable all irq when we start the nand controller, and
put all the transaction logic in the pxa3xx_nand_irq.

By doing this way, we could dramatically increase the
performance by avoid unnecessary delay.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:50 +00:00
Lei Wen
e353a20afa mtd: pxa3xx_nand: make scan procedure more clear
The previous probe function is some kind of big part.
This patch seperate the resource allocation to keep the probe process
more clear than before.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:50 +00:00
David Lambert
e70727e442 mtd: speedtest: fix integer overflow
32-bit integers used in 'calc_speed()' may overflow and lead to
incorrect results. Use 64-bit integers instead.

Signed-off-by: David Lambert <dave@lambsys.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:49 +00:00
Baruch Siach
5d9d993620 mtd: mxc_nand: fix read past buffer end
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Sascha hauer <s.hauer@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:49 +00:00
John Ogness
74f1b7244e mtd: omap3: nand: report corrected ecc errors
The number of corrected ECC errors should be reported since other MTD
systems make use of this information (such as UBI data scrubbing).

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:48 +00:00
Jason Liu
775adc3d44 mtd: nand: fix a typo in a commentary
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:47 +00:00
Roman Tereshonkov
c93ff6bf16 mtd: omap: add new variable to platform data to control onenand unlocking
New variable skip_initial_unlocking is added to the omap_onenand_platform_data.
This is used to inform the onenand driver to skip onenand unlocking when it
is initialized.

Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:47 +00:00
Roman Tereshonkov
b3dcfd3524 mtd: onenand: add new option to control initial onenand unlocking
A new option ONENAND_SKIP_INITIAL_UNLOCKING is added. This allows
to disable initial onenand unlocking when the driver is initialized.

Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:47 +00:00
David Griego
dcfb81d61d mtd: NOR flash driver for OMAP-L137/AM17x
OMAP-L137/AM17x has limited number of dedicated EMIFA
address pins, enough to interface directly to an SDRAM.
If a device such as an asynchronous flash needs to be
attached to the EMIFA, then either GPIO pins or a chip
select may be used to control the flash device's upper
address lines.

This patch adds support for the NOR flash on the OMAP-L137/
AM17x user interface daughter board using the latch-addr-flash
MTD mapping driver which allows flashes to be partially
physically addressed. The upper address lines are set by
a board specific code which is a separate patch.

Signed-off-by: David Griego <dgriego@mvista.com>
Signed-off-by: Aleksey Makarov <amakarov@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@ti.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:47 +00:00
Jarkko Lavinen
a321590246 mtd: Add mtdswap block driver
Add a driver for allowing an mtd device to be used as a block device for
swapping. The block device is volatile, and the mapping of swapped pages
is not stored on flash.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:46 +00:00
Jarkko Lavinen
115ee88c15 mtd_blkdevs: Set the maximum discards size
Set max_discard_sectors to UINT_MAX.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:46 +00:00
Jarkko Lavinen
c7519dbf6f mtd_blkdevs: Add background processing support
Add a new background method into mtd_blktrans_ops, add background support
into mtd_blktrans_thread(), and add mtd_blktrans_cease_background().

If the mtd blktrans dev has the background support, the thread will
call background function when the request queue becomes empty. The background
operation may run as long as needs to until
mtd_blktrans_cease_background() tells to stop.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:46 +00:00
Anatolij Gustschin
13ce77f46c mtd: cfi: fix writebufsize initialization
When initializing mtd->writebufsize, we must take into account
possible flash chip interleaving. Wrong writebufsize initialization
caused UBIFS recovery issues resulting in unmountable UBIFS file
system on NOR flash partitions.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:46 +00:00
Yoshihiro Shimoda
d8f90b2c9d mtd: m25p80: add support for M25PX64
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:45 +00:00
Roman Tereshonkov
4085bcc682 mtd: tests: add multiblock erase test to the mtd_speedtest
New multiblock erase speed test is added to mtd_speedtest.
It consists of 2-, 4-, 8-, 16-, 32- and 64-blocks at once
multiblock erase tests.

Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:45 +00:00
Adrian Hunter
fc7fe7691c mtd: tests: add count parameter to mtd_speedtest
By default mtd_speedtest uses all the eraseblocks of the
MTD partition being tested.  For large partitions a
smaller number is sufficient and makes running the test
quicker.  For that reason, add a parameter 'count' to
specify the maximum number of eraseblocks to use for
testing.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:45 +00:00
Roman Tereshonkov
e6da85685b mtd: onenand_base: onenand_verify bugfix for writepage non-aligned address
In onenand_verify function the address can be writepage non-aligned.
When a page is read for comparing the right offset should be used
for "this->verify_buf" to get the right matching with compared
"buf" buffer.

Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:45 +00:00
Adrian Hunter
b085058fe5 mtd: OneNAND: return read error for 4KiB page read
When reading using the 4KiB page read function, I/O
errors could be ignored if more than 1 page was read
at a time.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:44 +00:00
Stanislav Fomichev
7912a5e7f3 mtd: nand: fix pointer NULL pointer dereferencing
In 'verify_bbt_descr()', first check the "bd" pointer, then
dereference it.

Comments amended by Artem.

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:44 +00:00
Roman Tereshonkov
7b7e905ec2 mtd: tests: print correct values
The ebcnt and pgcnt variable initialization is moved before printk
which uses them.

Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:44 +00:00
Julia Lawall
3ee7451a02 mtd: ts5500_flash: avoid calling map_destroy on NULL
map_destroy dereferences its argument.  The call is furthermore only
reachable when this argument is NULL.  Thus the call is dropped.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
@@

*if (x == NULL)
{ ...
* map_destroy(x);
  ...
  return ...;
}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:44 +00:00
Mathias Krause
f17f12ce9d mtd: phram: fix memory leak
Commit 4f678a58 (mtd: fix memory leaks in phram_setup) missed two cases
where the memory allocated for name would be leaked. This commit frees
the memory when register_device() fails and on unregister_devices().

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:43 +00:00
Artem Bityutskiy
07be303d22 mtd: mtdram: initialize writebufsize field
Set the 'mtd->writebufsize' field to 64 to mimic modern CFI flashes.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:42 +00:00
Gabor Juhos
37a23c2018 mtd: m25p80: add support for the EON EN25F32 chip
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:42 +00:00
Holger Brunck
771df61949 mtd: adapt writebufsize calculation for concat
If different chips with different writebufsize are concatenated,
the writebufsize from the concat device has to be taken from
the device with the largest writebuffer. This writebufsize
is used later on in the UBI layer for the min I/O size.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:42 +00:00
Hong Xu
cbc6c5e73d mtd: atmel_nand: Add DMA support to access Nandflash
Some SAM9 chips have the ability to perform DMA between CPU and SMC controller.
This patch adds DMA support for SAM9RL, SAM9G45, SSAM9G46,AM9M10, SAM9M11.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Tested-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:42 +00:00
H Hartley Sweeten
7f53f12f02 mtd: mtd_blkdevs: local symbols should be static
The function blktrans_dev_release and blktrans_dev_put are only used
locally in this file and should be static.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:42 +00:00
H Hartley Sweeten
ca91facf6b mtd: local symbols should be static
The three backing_dev_info symbols are only used in this file and
should be static.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:41 +00:00
Jamie Iles
83025c824f mtd: mpc5121_nfc: don't treat NULL clk as an error
clk_get() returns a struct clk cookie to the driver and some platforms
may return NULL if they only support a single clock.  clk_get() has only
failed if it returns a ERR_PTR() encoded pointer.

Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:41 +00:00
Dmitry Eremin-Solenikov
f53fdebcc3 mtd: drop MTD_CONCAT from Kconfig entirely
As there are no more dependencies on MTD_CONCAT or CONFIG_MTD_CONCAT,
drop this entry from Kconfig entirely.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:41 +00:00
Dmitry Eremin-Solenikov
a8adc3f01b mtd: drop CONFIG_MTD_CONCAT ifdefs
As MTD_CONCAT is becoming a part of mtd core, it's now meaningless
to to check for it in ifdefs. Drop such references from MTD code.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:40 +00:00
Dmitry Eremin-Solenikov
e1d6ee7222 mtd: drop MTD_CONCAT dependencies from Kconfig
As MTD_CONCAT is becoming a part of mtd core, it's no longer necessary
to depend on it in Kconfig scripts. Drop such references.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:40 +00:00
Dmitry Eremin-Solenikov
4d42942cff mtd: make MTD_CONCAT support mandatory
Move mtdconcat to be an integral part of the mtd core. It's a tiny bit
of code, which bears 'say Y if you don't know what to do' note in the
Kconfig. OTOH there are several ugly ifdefs depending on the MTD_CONCAT.
So, making MTD_CONCAT support mandatory will allow us to clean up code a
lot.

Kconfig entry is changed to be a bool defaulting to Y, so all code
pieces depending on it, will have MTD_CONCAT Kconfig symbol and
CONFIG_MTD_CONCAT define. This will be removed in one of next patches.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:40 +00:00
Axel Lin
c804c73384 mtd: add "platform:" prefix for platform modalias
Since 43cc71eed1 (platform: prefix MODALIAS
with "platform:"), the platform modalias is prefixed with "platform:".

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org
2011-03-11 14:20:05 +00:00
Maxim Levitsky
bd637f6f22 mtd: mtd_blkdevs: fix double free on error path
This one liner patch fixes double free that will occur if add_mtd_blktrans_dev
fails. On failure it frees the input argument, but all its users also free it
on error which is natural thing to do. Thus don't free it.

All credit for finding that bug belongs to reporters of the bug in the android bugzilla
http://code.google.com/p/android/issues/detail?id=13761

Commit message tweaked by Artem.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org
2011-03-11 14:19:44 +00:00
Stanislaw Gruszka
82013d988f mtd: amd76xrom: fix oops at boot when resources are not available
For some unknown reasons resources needed by amd76xrom driver can be
unavailable. And instead of returning an error, the driver keeps going
and crash the kernel. This patch fixes the problem by making the driver
return -EBUSY if the resources are not available.

Commit messages tweaked by Artem.

Reported-by: Russell Whitaker <russ@ashlandhome.net>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org
2011-03-11 14:19:09 +00:00
Joakim Tjernlund
ecf3fde07c mtd: fix race in cfi_cmdset_0001 driver
As inval_cache_and_wait_for_operation() drop and reclaim the lock
to invalidate the cache, some other thread may suspend the operation
before reaching the for(;;) loop. Therefore the loop must start with
checking the chip->state before reading status from the chip.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Acked-by: Michael Cashwell <mboards@prograde.net>
Acked-by: Stefan Bigler <stefan.bigler@keymile.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org
2011-03-11 12:09:07 +00:00
Antony Pavlov
ceabebb2bd mtd: jedec_probe: initialise make sector erase command variable
In the commit 08968041be
 (mtd: cfi_cmdset_0002: make sector erase command variable)
introdused a field sector_erase_cmd. In the same commit initialisation
of cfi->sector_erase_cmd made in cfi_chip_setup()
(file drivers/mtd/chips/cfi_probe.c), so the CFI chip has no problem:

...
        cfi->cfi_mode = CFI_MODE_CFI;
        cfi->sector_erase_cmd = CMD(0x30);
...

But for the JEDEC chips this initialisation is not carried out,
so the JEDEC chips have sector_erase_cmd == 0.

This patch adds the missing initialisation.

Signed-off-by: Antony Pavlov <antony@niisi.msk.ru>
Acked-by: Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
CC: stable@kernel.org
2011-03-11 12:05:54 +00:00
Antony Pavlov
efba2e313e mtd: jedec_probe: Change variable name from cfi_p to cfi
In the following commit, we'll need to use the CMD() macro in order to
fix the initialisation of the sector_erase_cmd field. That requires the
local variable to be called 'cfi', so change it first in a simple patch.

Signed-off-by: Antony Pavlov <antony@niisi.msk.ru>
Acked-by: Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
CC: stable@kernel.org
2011-03-11 12:05:24 +00:00
Russell King
3afdb0f352 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable 2011-03-10 13:53:29 +00:00
Artem Bityutskiy
f43ec882b8 UBI: provide LEB offset information
Provide the LEB offset information in the UBI device information data
structure. This piece of information is required by UBIFS to find out
what are the LEB offsets which are aligned to the max. write size.

If LEB offset not aligned to max. write size, then UBIFS has to take
this into account to write more optimally.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-08 10:12:48 +02:00
Artem Bityutskiy
30b542ef45 UBI: incorporate maximum write size
Incorporate MTD write buffer size into UBI device information
because UBIFS needs this field. UBI does not use it ATM, just
provides to upper layers in 'struct ubi_device_info'.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-08 10:12:48 +02:00
Richard Zhao
7685167128 ARM: imx5x: clean up ARCH_MX5X
Move to SOC_SOC_IMX5X. Leave only places which prevent multi-soc
using ARCH_MX5X.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07 19:29:42 +01:00
Tony Lindgren
12d7d4e0ed Merge branch 'devel-cleanup' into omap-for-linus
Conflicts:
	arch/arm/mach-omap2/timer-gp.c
2011-03-02 17:07:14 -08:00
Grant Likely
1c48a5c93d dt: Eliminate of_platform_{,un}register_driver
Final step to eliminate of_platform_bus_type.  They're all just
platform drivers now.

v2: fix type in pasemi_nand.c (thanks to Stephen Rothwell)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-28 13:22:46 -07:00
Kukjin Kim
fc406cd84b mtd: OneNAND: Change dependency of ARCH_EXYNOS4
This patch updates EXYNOS4 OneNAND support according to the change of
ARCH name, EXYNOS4.

Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-22 13:51:15 +09:00
Roman Tereshonkov
c497dd5594 mtd: OneNAND: OMAP2: increase multiblock erase verify timeout
The current multiblock erase verify read timeout 100us is the maximum
for none-error case. If errors happen during multibock erase then
the specification recommends to run multiblock erase verify command
with maximum timeout 10ms (see specs. for KFM4G16Q2A and KFN8G16Q2A).

For the most common non-error case we wait 100us in udelay polling
loop. In case of timeout the interrupt mode is used to wait for the
command end.

Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17 15:44:46 -08:00
Adrian Hunter
3ad2d86136 OMAP: OneNAND: determine frequency in one place
OneNAND frequency is determined when calculating
GPMC timings.  Return that value instead of determining it
again in the OMAP OneNAND driver.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17 15:44:45 -08:00
Sukumar Ghorai
f040d33253 omap3: nand: making ecc layout as compatible with romcode ecc
This patch overrides nand ecc layout and bad block descriptor (for 8-bit
device) to support hw ecc in romcode layout. So as to have in sync with ecc
layout throughout; i.e. x-loader, u-boot and kernel.

This enables to flash x-loader, u-boot, kernel, FS images from kernel itself
and compatiable with other tools.

This patch does not enables this feature by default and need to pass from
board file to enable for any board.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17 15:32:55 -08:00
Sukumar Ghorai
f3d73f362d omap3: nand: ecc layout select from board file
This patch makes it possible to select sw or hw (different layout options)
ecc scheme supported by omap nand driver.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17 15:32:54 -08:00
Sukumar Ghorai
317379a975 omap3: nand: configurable fifo threshold to gain the throughput
Configure the FIFO THREASHOLD value different for read and write to keep busy
both filling and to drain out of FIFO at reading and writing.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17 15:32:54 -08:00
Sukumar Ghorai
4e07037616 omap3: nand: prefetch in irq mode support
This patch enable prefetch-irq mode for nand transfer(read, write)

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17 15:32:53 -08:00
Sukumar Ghorai
1b0b323c70 omap3: nand: configurable transfer type per board
nand transfer type (sDMA, Polled, prefetch) can be select from board file,
enabling all transfer type in driver, by default.

this helps in multi-omap build and to select different transfer type for
different board.

Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17 15:32:52 -08:00
Sukumar Ghorai
d5ce2b6592 omap3630: nand: fix device size to work in polled mode
zoom3 and 3630-sdp having the x16 nand device.
This patch configure gpmc as x16 and select the currect function in driver
for polled mode (without prefetch enable) transfer.

Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17 15:32:52 -08:00
Gilles Espinasse
177b241d0e kbuild, mtd, net: a few comment typo fixes and rewording
Signed-off-by: Gilles Espinasse <g.esp@free.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-17 16:30:10 +01:00
Tejun Heo
58a69cb47e workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable'
There are two spellings in use for 'freeze' + 'able' - 'freezable' and
'freezeable'.  The former is the more prominent one.  The latter is
mostly used by workqueue and in a few other odd places.  Unify the
spelling to 'freezable'.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Steven Whitehouse <swhiteho@redhat.com>
2011-02-16 17:48:59 +01:00
Artem Bityutskiy
a87f29cbbc UBI: always re-read in case of read failures
When the read operation fails, UBI tries to re-read several times in
a hope that one of the subsequent reads may succeed. However, currently
UBI re-reads only if MTD failed to read all data, but does not re-reads
if all the data were read, but with an integrity error (-EBADMSB). This
patch makes UBI to always re-try reading.

This should be useful for reading NAND pages with unstable bits -
re-reading may help to get correct data.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-02-06 19:35:26 +02:00
Artem Bityutskiy
fef2deb31f UBI: cleanup comments about corrupted PEBs
Just make them a bit more readable and explanatory.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-02-06 19:19:41 +02:00
Artem Bityutskiy
6c1e875ca6 UBI: add slab cache for ubi_scan_leb objects
During scanning UBI allocates one struct ubi_scan_leb object for each PEB,
so it can end up allocating thousands of them. Use slab cache to reduce
memory consumption for these 48-byte objects, because currently used
'kmalloc()' ends up allocating 64 bytes per object, instead of 48.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-02-06 19:19:23 +02:00
Artem Bityutskiy
7950d023c5 UBI: use raw mtd read function in debugging code
This change affects only the debugging code. Namely, use mtd->read()
function instead of ubi_io_read() to avoid bit-flips injection
(ubi_dbg_is_bitflip()) which we do not want on the debugging path.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-02-06 19:18:58 +02:00
Artem Bityutskiy
276832d878 UBI: try to reveal buggy MTD drivers
When reading data from the flash, corrupt the buffer we are about to
read to. The idea is to fix the following possible situation:

1. The buffer contains data from previous operation, e.g., read from
   another PEB previously. The data looks like expected, e.g., if we
   just do not read anything and return - the caller would not
   notice this. E.g., if we are reading a VID header, the buffer may
   contain a valid VID header from another PEB.
2. The driver is buggy and returns use success or -EBADMSG or
   -EUCLEAN, but it does not actually put any data to the buffer.

This may confuse UBI or upper layers - they may think the buffer
contains valid data while in fact it is just old data.

Thus, try to reveal such buggy MTD drivers with simple debugging
code which fills the read buffer with 0x12 constant.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-02-06 19:18:32 +02:00
Artem Bityutskiy
3a0592b1dd Revert "UBI: use mtd->writebufsize to set minimal I/O unit size"
This reverts commit a121f64399.

Unfortunately, this commit breaks UBIFS backward compatibility and
makes new UBIFS refuse older UBIFS-formatted media:

UBIFS error: validate_sb: min. I/O unit mismatch: 8 in superblock, 64 real

Thus, we have to revert this patch and work on a better solution.

Reported-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-01-29 18:27:13 +02:00
Artem Bityutskiy
2fff570e7c UBI: add a commentary about allocating VID header buffer on stack
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-01-26 10:14:23 +02:00
John Ogness
e8cfe00943 UBI: cleanup LEB start calculations
Wrong macro was used in calculating the data offset: UBI_EC_HDR_SIZE instead of
UBI_VID_HDR_SIZE. The data offset should be VID header offset + VID header size
(aligned to the minimum I/O unit).

This was not a bug only because currently UBI_EC_HDR_SIZE and UBI_VID_HDR_SIZE
have the same value of 64 bytes.

Commit message was amended by Artem.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-01-26 10:14:17 +02:00
Holger Brunck
d4c6381303 UBI: fix NOR erase preparation quirk
In 'nor_erase_prepare()' we want to make sure the UBI headers are
corrupted. But it is possible that one of the headers just contains
all 0xFFs, which is also OK, because UBI will erase it in case of
a power cut.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-01-26 10:13:52 +02:00
Linus Torvalds
ab2020f2f1 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (59 commits)
  mtd: mtdpart: disallow reading OOB past the end of the partition
  mtd: pxa3xx_nand: NULL dereference in pxa3xx_nand_probe
  UBI: use mtd->writebufsize to set minimal I/O unit size
  mtd: initialize writebufsize in the MTD object of a partition
  mtd: onenand: add mtd->writebufsize initialization
  mtd: nand: add mtd->writebufsize initialization
  mtd: cfi: add writebufsize initialization
  mtd: add writebufsize field to mtd_info struct
  mtd: OneNAND: OMAP2/3: prevent regulator sleeping while OneNAND is in use
  mtd: OneNAND: add enable / disable methods to onenand_chip
  mtd: m25p80: Fix JEDEC ID for AT26DF321
  mtd: txx9ndfmc: limit transfer bytes to 512 (ECC provides 6 bytes max)
  mtd: cfi_cmdset_0002: add support for Samsung K8D3x16UxC NOR chips
  mtd: cfi_cmdset_0002: add support for Samsung K8D6x16UxM NOR chips
  mtd: nand: ams-delta: drop omap_read/write, use ioremap
  mtd: m25p80: add debugging trace in sst_write
  mtd: nand: ams-delta: select for built-in by default
  mtd: OneNAND: lighten scary initial bad block messages
  mtd: OneNAND: OMAP2/3: add support for command line partitioning
  mtd: nand: rearrange ONFI revision checking, add ONFI 2.3
  ...

Fix up trivial conflict in drivers/mtd/Kconfig as per DavidW.
2011-01-17 11:15:30 -08:00
Artem Bityutskiy
154bf89f5e mtd: mtdpart: disallow reading OOB past the end of the partition
This patch fixes the mtdpart bug which allows users reading OOB past the
end of the partition. This happens because 'part_read_oob()' allows reading
multiple OOB areas in one go, and mtdparts does not validate the OOB
length in the request.

Although there is such check in 'nand_do_read_oob()' in nand_base.c, but
it checks that we do not read past the flash chip, not the partition,
because in nand_base.c we work with the whole chip (e.g., mtd->size
in nand_base.c is the size of the whole chip). So this check cannot
be done correctly in nand_base.c and should be instead done in mtdparts.c.

This problem was reported by Jason Liu <r64343@freescale.com> and reproduced
with nandsim:

$ modprobe nandsim first_id_byte=0x20 second_id_byte=0xaa third_id_byte=0x00 \
                   fourth_id_byte=0x15 parts=0x400,0x400
$ modprobe nandsim mtd_oobtest.ko dev=0
$ dmesg
= snip =
mtd_oobtest: attempting to read past end of device
mtd_oobtest: an error is expected...
mtd_oobtest: error: read past end of device
= snip =
mtd_oobtest: finished with 2 errors

Reported-by: Jason Liu <liu.h.jason@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-17 15:25:48 +00:00
Al Viro
f03c65993b sanitize vfsmount refcounting changes
Instead of splitting refcount between (per-cpu) mnt_count
and (SMP-only) mnt_longrefs, make all references contribute
to mnt_count again and keep track of how many are longterm
ones.

Accounting rules for longterm count:
	* 1 for each fs_struct.root.mnt
	* 1 for each fs_struct.pwd.mnt
	* 1 for having non-NULL ->mnt_ns
	* decrement to 0 happens only under vfsmount lock exclusive

That allows nice common case for mntput() - since we can't drop the
final reference until after mnt_longterm has reached 0 due to the rules
above, mntput() can grab vfsmount lock shared and check mnt_longterm.
If it turns out to be non-zero (which is the common case), we know
that this is not the final mntput() and can just blindly decrement
percpu mnt_count.  Otherwise we grab vfsmount lock exclusive and
do usual decrement-and-check of percpu mnt_count.

For fs_struct.c we have mnt_make_longterm() and mnt_make_shortterm();
namespace.c uses the latter in places where we don't already hold
vfsmount lock exclusive and opencodes a few remaining spots where
we need to manipulate mnt_longterm.

Note that we mostly revert the code outside of fs/namespace.c back
to what we used to have; in particular, normal code doesn't need
to care about two kinds of references, etc.  And we get to keep
the optimization Nick's variant had bought us...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-16 13:47:07 -05:00
Linus Torvalds
275220f0fc Merge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
  block: ensure that completion error gets properly traced
  blktrace: add missing probe argument to block_bio_complete
  block cfq: don't use atomic_t for cfq_group
  block cfq: don't use atomic_t for cfq_queue
  block: trace event block fix unassigned field
  block: add internal hd part table references
  block: fix accounting bug on cross partition merges
  kref: add kref_test_and_get
  bio-integrity: mark kintegrityd_wq highpri and CPU intensive
  block: make kblockd_workqueue smarter
  Revert "sd: implement sd_check_events()"
  block: Clean up exit_io_context() source code.
  Fix compile warnings due to missing removal of a 'ret' variable
  fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
  block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
  cfq-iosched: don't check cfqg in choose_service_tree()
  fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
  cdrom: export cdrom_check_events()
  sd: implement sd_check_events()
  sr: implement sr_check_events()
  ...
2011-01-13 10:45:01 -08:00
Linus Torvalds
b2034d474b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (41 commits)
  fs: add documentation on fallocate hole punching
  Gfs2: fail if we try to use hole punch
  Btrfs: fail if we try to use hole punch
  Ext4: fail if we try to use hole punch
  Ocfs2: handle hole punching via fallocate properly
  XFS: handle hole punching via fallocate properly
  fs: add hole punching to fallocate
  vfs: pass struct file to do_truncate on O_TRUNC opens (try #2)
  fix signedness mess in rw_verify_area() on 64bit architectures
  fs: fix kernel-doc for dcache::prepend_path
  fs: fix kernel-doc for dcache::d_validate
  sanitize ecryptfs ->mount()
  switch afs
  move internal-only parts of ncpfs headers to fs/ncpfs
  switch ncpfs
  switch 9p
  pass default dentry_operations to mount_pseudo()
  switch hostfs
  switch affs
  switch configfs
  ...
2011-01-13 10:27:28 -08:00
Linus Torvalds
008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Seiji Aguchi
fc2d557c74 kmsg_dump: constrain mtdoops and ramoops to perform their actions only for KMSG_DUMP_PANIC
This series aims to develop logging facility for enterprise use.

It is important to save kernel messages reliably on enterprise system
because they are helpful for diagnosing system.

This series add kmsg_dump() to the paths loosing kernel messages.  The use
case is the following.

[Use case of reboot/poweroff/halt/emergency_restart]

 My company has often experienced the followings in our support service.
 - Customer's system suddenly reboots.
 - Customers ask us to investigate the reason of the reboot.

We recognize the fact itself because boot messages remain in
/var/log/messages.  However, we can't investigate the reason why the
system rebooted, because the last messages don't remain.  And off course
we can't explain the reason.

We can solve above problem with this patch as follows.

 Case1: reboot with command
   - We can see "Restarting system with command:" or ""Restarting system.".

 Case2: halt with command
   - We can see "System halted.".

 Case3: poweroff with command
   - We can see " Power down.".

 Case4: emergency_restart with sysrq.
   - We can see "Sysrq:" outputted in __handle_sysrq().

 Case5: emergency_restart with softdog.
   - We can see "Initiating system reboot" in watchdog_fire().

So, we can distinguish the reason of reboot, poweroff, halt and emergency_restart.

If customer executed reboot command, you may think the customer should
know the fact.  However, they often claim they don't execute the command
when they rebooted system by mistake.

No message remains on the current Linux kernel, so we can't show the proof
to the customer.  This patch improves this situation.

This patch:

Alters mtdoops and ramoops to perform their actions only for
KMSG_DUMP_PANIC, KMSG_DUMP_OOPS and KMSG_DUMP_KEXEC because they would
like to log crashes only.

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Reviewed-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:07 -08:00
Al Viro
c74a1cbb3c pass default dentry_operations to mount_pseudo()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-12 20:03:43 -05:00
Linus Torvalds
0bd2cbcdfa Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (29 commits)
  of/flattree: forward declare struct device_node in of_fdt.h
  ipmi: explicitly include of_address.h and of_irq.h
  sparc: explicitly cast negative phandle checks to s32
  powerpc/405: Fix missing #{address,size}-cells in i2c node
  powerpc/5200: dts: refactor dts files
  powerpc/5200: dts: Change combatible strings on localbus
  powerpc/5200: dts: remove unused properties
  powerpc/5200: dts: rename nodes to prepare for refactoring dts files
  of/flattree: Update dtc to current mainline.
  of/device: Don't register disabled devices
  powerpc/dts: fix syntax bugs in bluestone.dts
  of: Fixes for OF probing on little endian systems
  of: make drivers depend on CONFIG_OF instead of CONFIG_PPC_OF
  of/flattree: Add of_flat_dt_match() helper function
  of_serial: explicitly include of_irq.h
  of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree
  of/flattree: Reorder unflatten_dt_node
  of/flattree: Refactor unflatten_dt_node
  of/flattree: Add non-boottime device tree functions
  of/flattree: Add Kconfig for EARLY_FLATTREE
  ...

Fix up trivial conflict in arch/sparc/prom/tree_32.c as per Grant.
2011-01-10 08:57:03 -08:00
Linus Torvalds
b4a45f5fe8 Merge branch 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin
* 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin: (57 commits)
  fs: scale mntget/mntput
  fs: rename vfsmount counter helpers
  fs: implement faster dentry memcmp
  fs: prefetch inode data in dcache lookup
  fs: improve scalability of pseudo filesystems
  fs: dcache per-inode inode alias locking
  fs: dcache per-bucket dcache hash locking
  bit_spinlock: add required includes
  kernel: add bl_list
  xfs: provide simple rcu-walk ACL implementation
  btrfs: provide simple rcu-walk ACL implementation
  ext2,3,4: provide simple rcu-walk ACL implementation
  fs: provide simple rcu-walk generic_check_acl implementation
  fs: provide rcu-walk aware permission i_ops
  fs: rcu-walk aware d_revalidate method
  fs: cache optimise dentry and inode for rcu-walk
  fs: dcache reduce branches in lookup path
  fs: dcache remove d_mounted
  fs: fs_struct use seqlock
  fs: rcu-walk for path lookup
  ...
2011-01-07 08:56:33 -08:00
Nick Piggin
b3e19d924b fs: scale mntget/mntput
The problem that this patch aims to fix is vfsmount refcounting scalability.
We need to take a reference on the vfsmount for every successful path lookup,
which often go to the same mount point.

The fundamental difficulty is that a "simple" reference count can never be made
scalable, because any time a reference is dropped, we must check whether that
was the last reference. To do that requires communication with all other CPUs
that may have taken a reference count.

We can make refcounts more scalable in a couple of ways, involving keeping
distributed counters, and checking for the global-zero condition less
frequently.

- check the global sum once every interval (this will delay zero detection
  for some interval, so it's probably a showstopper for vfsmounts).

- keep a local count and only taking the global sum when local reaches 0 (this
  is difficult for vfsmounts, because we can't hold preempt off for the life of
  a reference, so a counter would need to be per-thread or tied strongly to a
  particular CPU which requires more locking).

- keep a local difference of increments and decrements, which allows us to sum
  the total difference and hence find the refcount when summing all CPUs. Then,
  keep a single integer "long" refcount for slow and long lasting references,
  and only take the global sum of local counters when the long refcount is 0.

This last scheme is what I implemented here. Attached mounts and process root
and working directory references are "long" references, and everything else is
a short reference.

This allows scalable vfsmount references during path walking over mounted
subtrees and unattached (lazy umounted) mounts with processes still running
in them.

This results in one fewer atomic op in the fastpath: mntget is now just a
per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock
and non-atomic decrement in the common case. However code is otherwise bigger
and heavier, so single threaded performance is basically a wash.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:33 +11:00