linux/arch/x86/kernel/setup.c

1061 lines
25 KiB
C
Raw Normal View History

/*
* Copyright (C) 1995 Linus Torvalds
*
* Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
*
* Memory region support
* David Parsons <orc@pell.chi.il.us>, July-August 1999
*
* Added E820 sanitization routine (removes overlapping memory regions);
* Brian Moyle <bmoyle@mvista.com>, February 2001
*
* Moved CPU detection code to cpu/${cpu}.c
* Patrick Mochel <mochel@osdl.org>, March 2002
*
* Provisions for empty E820 memory regions (reported by certain BIOSes).
* Alex Achenbach <xela@slit.de>, December 2002.
*
*/
/*
* This file handles the architecture-dependent parts of initialization
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <linux/screen_info.h>
#include <linux/ioport.h>
#include <linux/acpi.h>
#include <linux/sfi.h>
#include <linux/apm_bios.h>
#include <linux/initrd.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/console.h>
#include <linux/mca.h>
#include <linux/root_dev.h>
#include <linux/highmem.h>
#include <linux/module.h>
#include <linux/efi.h>
#include <linux/init.h>
#include <linux/edd.h>
Firmware: add iSCSI iBFT Support Add /sysfs/firmware/ibft/[initiator|targetX|ethernetX] directories along with text properties which export the the iSCSI Boot Firmware Table (iBFT) structure. What is iSCSI Boot Firmware Table? It is a mechanism for the iSCSI tools to extract from the machine NICs the iSCSI connection information so that they can automagically mount the iSCSI share/target. Currently the iSCSI information is hard-coded in the initrd. The /sysfs entries are read-only one-name-and-value fields. The usual set of data exposed is: # for a in `find /sys/firmware/ibft/ -type f -print`; do echo -n "$a: "; cat $a; done /sys/firmware/ibft/target0/target-name: iqn.2007.com.intel-sbx44:storage-10gb /sys/firmware/ibft/target0/nic-assoc: 0 /sys/firmware/ibft/target0/chap-type: 0 /sys/firmware/ibft/target0/lun: 00000000 /sys/firmware/ibft/target0/port: 3260 /sys/firmware/ibft/target0/ip-addr: 192.168.79.116 /sys/firmware/ibft/target0/flags: 3 /sys/firmware/ibft/target0/index: 0 /sys/firmware/ibft/ethernet0/mac: 00:11:25:9d:8b:01 /sys/firmware/ibft/ethernet0/vlan: 0 /sys/firmware/ibft/ethernet0/gateway: 192.168.79.254 /sys/firmware/ibft/ethernet0/origin: 0 /sys/firmware/ibft/ethernet0/subnet-mask: 255.255.252.0 /sys/firmware/ibft/ethernet0/ip-addr: 192.168.77.41 /sys/firmware/ibft/ethernet0/flags: 7 /sys/firmware/ibft/ethernet0/index: 0 /sys/firmware/ibft/initiator/initiator-name: iqn.2007-07.com:konrad.initiator /sys/firmware/ibft/initiator/flags: 3 /sys/firmware/ibft/initiator/index: 0 For full details of the IBFT structure please take a look at: ftp://ftp.software.ibm.com/systems/support/system_x_pdf/ibm_iscsi_boot_firmware_table_v1.02.pdf [akpm@linux-foundation.org: fix build] Signed-off-by: Konrad Rzeszutek <konradr@linux.vnet.ibm.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Peter Jones <pjones@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-10 02:50:41 +00:00
#include <linux/iscsi_ibft.h>
#include <linux/nodemask.h>
#include <linux/kexec.h>
#include <linux/dmi.h>
#include <linux/pfn.h>
#include <linux/pci.h>
#include <asm/pci-direct.h>
x86: early boot debugging via FireWire (ohci1394_dma=early) This patch adds a new configuration option, which adds support for a new early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch() to decide wether OHCI-1394 FireWire controllers should be initialized and enabled for physical DMA access to allow remote debugging of early problems like issues ACPI or other subsystems which are executed very early. If the config option is not enabled, no code is changed, and if the boot paramenter is not given, no new code is executed, and independent of that, all new code is freed after boot, so the config option can be even enabled in standard, non-debug kernels. With specialized tools, it is then possible to get debugging information from machines which have no serial ports (notebooks) such as the printk buffer contents, or any data which can be referenced from global pointers, if it is stored below the 4GB limit and even memory dumps of of the physical RAM region below the 4GB limit can be taken without any cooperation from the CPU of the host, so the machine can be crashed early, it does not matter. In the extreme, even kernel debuggers can be accessed in this way. I wrote a small kgdb module and an accompanying gdb stub for FireWire which allows to gdb to talk to kgdb using remote remory reads and writes over FireWire. An version of the gdb stub fore FireWire is able to read all global data from a system which is running a a normal kernel without any kernel debugger, without any interruption or support of the system's CPU. That way, e.g. the task struct and so on can be read and even manipulated when the physical DMA access is granted. A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt and I've put a copy online at ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt It also has links to all the tools which are available to make use of it another copy of it is online at: ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diff Signed-Off-By: Bernhard Kaindl <bk@suse.de> Tested-By: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:34:11 +00:00
#include <linux/init_ohci1394_dma.h>
#include <linux/kvm_para.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/delay.h>
#include <linux/kallsyms.h>
#include <linux/cpufreq.h>
#include <linux/dma-mapping.h>
#include <linux/ctype.h>
#include <linux/uaccess.h>
#include <linux/percpu.h>
#include <linux/crash_dump.h>
#include <linux/tboot.h>
#include <video/edid.h>
#include <asm/mtrr.h>
#include <asm/apic.h>
#include <asm/trampoline.h>
#include <asm/e820.h>
#include <asm/mpspec.h>
#include <asm/setup.h>
#include <asm/efi.h>
#include <asm/timer.h>
#include <asm/i8259.h>
#include <asm/sections.h>
#include <asm/dmi.h>
#include <asm/io_apic.h>
#include <asm/ist.h>
#include <asm/vmi.h>
#include <asm/setup_arch.h>
#include <asm/bios_ebda.h>
#include <asm/cacheflush.h>
#include <asm/processor.h>
#include <asm/bugs.h>
#include <asm/system.h>
#include <asm/vsyscall.h>
#include <asm/cpu.h>
#include <asm/desc.h>
#include <asm/dma.h>
#include <asm/iommu.h>
#include <asm/gart.h>
#include <asm/mmu_context.h>
#include <asm/proto.h>
#include <asm/paravirt.h>
x86: Hypervisor detection and get tsc_freq from hypervisor Impact: Changes timebase calibration on Vmware. v3->v2 : Abstract the hypervisor detection and feature (tsc_freq) request behind a hypervisor.c file v2->v1 : Add a x86_hyper_vendor field to the cpuinfo_x86 structure. This avoids multiple calls to the hypervisor detection function. This patch adds function to detect if we are running under VMware. The current way to check if we are on VMware is following, # check if "hypervisor present bit" is set, if so read the 0x40000000 cpuid leaf and check for "VMwareVMware" signature. # if the above fails, check the DMI vendors name for "VMware" string if we find one we query the VMware hypervisor port to check if we are under VMware. The DMI + "VMware hypervisor port check" is needed for older VMware products, which don't implement the hypervisor signature cpuid leaf. Also note that since we are checking for the DMI signature the hypervisor port should never be accessed on native hardware. This patch also adds a hypervisor_get_tsc_freq function, instead of calibrating the frequency which can be error prone in virtualized environment, we ask the hypervisor for it. We get the frequency from the hypervisor by accessing the hypervisor port if we are running on VMware. Other hypervisors too can add code to the generic routine to get frequency on their platform. Signed-off-by: Alok N Kataria <akataria@vmware.com> Signed-off-by: Dan Hecht <dhecht@vmware.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-27 17:41:46 +00:00
#include <asm/hypervisor.h>
#include <asm/percpu.h>
#include <asm/topology.h>
#include <asm/apicdef.h>
x86: Export k8 physical topology To eventually interleave emulated nodes over physical nodes, we need to know the physical topology of the machine without actually registering it. This does the k8 node setup in two parts: detection and registration. NUMA emulation can then used the physical topology detected to setup the address ranges of emulated nodes accordingly. If emulation isn't used, the k8 nodes are registered as normal. Two formals are added to the x86 NUMA setup functions: `acpi' and `k8'. These represent whether ACPI or K8 NUMA has been detected; both cannot be true at the same time. This specifies to the NUMA emulation code whether an underlying physical NUMA topology exists and which interface to use. This patch deals solely with separating the k8 setup path into Northbridge detection and registration steps and leaves the ACPI changes for a subsequent patch. The `acpi' formal is added here, however, to avoid touching all the header files again in the next patch. This approach also ensures emulated nodes will not span physical nodes so the true memory latency is not misrepresented. k8_get_nodes() may now be used to export the k8 physical topology of the machine for NUMA emulation. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Ankita Garg <ankita@in.ibm.com> Cc: Len Brown <len.brown@intel.com> LKML-Reference: <alpine.DEB.1.00.0909251518400.14754@chino.kir.corp.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-25 22:20:00 +00:00
#include <asm/k8.h>
#ifdef CONFIG_X86_64
#include <asm/numa_64.h>
#endif
#include <asm/mce.h>
/*
* end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
* The direct mapping extends to max_pfn_mapped, so that we can directly access
* apertures, ACPI and other tables without having to play with fixmaps.
*/
unsigned long max_low_pfn_mapped;
unsigned long max_pfn_mapped;
#ifdef CONFIG_DMI
RESERVE_BRK(dmi_alloc, 65536);
#endif
unsigned int boot_cpu_id __read_mostly;
2009-02-27 01:35:44 +00:00
static __initdata unsigned long _brk_start = (unsigned long)__brk_base;
unsigned long _brk_end = (unsigned long)__brk_base;
#ifdef CONFIG_X86_64
int default_cpu_present_to_apicid(int mps_cpu)
{
return __default_cpu_present_to_apicid(mps_cpu);
}
int default_check_phys_apicid_present(int phys_apicid)
{
return __default_check_phys_apicid_present(phys_apicid);
}
#endif
#ifndef CONFIG_DEBUG_BOOT_PARAMS
struct boot_params __initdata boot_params;
#else
struct boot_params boot_params;
#endif
/*
* Machine setup..
*/
static struct resource data_resource = {
.name = "Kernel data",
.start = 0,
.end = 0,
.flags = IORESOURCE_BUSY | IORESOURCE_MEM
};
static struct resource code_resource = {
.name = "Kernel code",
.start = 0,
.end = 0,
.flags = IORESOURCE_BUSY | IORESOURCE_MEM
};
static struct resource bss_resource = {
.name = "Kernel bss",
.start = 0,
.end = 0,
.flags = IORESOURCE_BUSY | IORESOURCE_MEM
};
#ifdef CONFIG_X86_32
/* cpu data as detected by the assembly code in head.S */
struct cpuinfo_x86 new_cpu_data __cpuinitdata = {0, 0, 0, 0, -1, 1, 0, 0, -1};
/* common cpu data for all cpus */
struct cpuinfo_x86 boot_cpu_data __read_mostly = {0, 0, 0, 0, -1, 1, 0, 0, -1};
EXPORT_SYMBOL(boot_cpu_data);
static void set_mca_bus(int x)
{
#ifdef CONFIG_MCA
MCA_bus = x;
#endif
}
unsigned int def_to_bigsmp;
/* for MCA, but anyone else can use it if they want */
unsigned int machine_id;
unsigned int machine_submodel_id;
unsigned int BIOS_revision;
struct apm_info apm_info;
EXPORT_SYMBOL(apm_info);
#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \
defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
struct ist_info ist_info;
EXPORT_SYMBOL(ist_info);
#else
struct ist_info ist_info;
#endif
#else
struct cpuinfo_x86 boot_cpu_data __read_mostly = {
.x86_phys_bits = MAX_PHYSMEM_BITS,
};
EXPORT_SYMBOL(boot_cpu_data);
#endif
#if !defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64)
unsigned long mmu_cr4_features;
#else
unsigned long mmu_cr4_features = X86_CR4_PAE;
#endif
/* Boot loader ID and version as integers, for the benefit of proc_dointvec */
int bootloader_type, bootloader_version;
/*
* Setup options
*/
struct screen_info screen_info;
EXPORT_SYMBOL(screen_info);
struct edid_info edid_info;
EXPORT_SYMBOL_GPL(edid_info);
extern int root_mountflags;
unsigned long saved_video_mode;
#define RAMDISK_IMAGE_START_MASK 0x07FF
#define RAMDISK_PROMPT_FLAG 0x8000
#define RAMDISK_LOAD_FLAG 0x4000
static char __initdata command_line[COMMAND_LINE_SIZE];
#ifdef CONFIG_CMDLINE_BOOL
static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
#endif
#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
struct edd edd;
#ifdef CONFIG_EDD_MODULE
EXPORT_SYMBOL(edd);
#endif
/**
* copy_edd() - Copy the BIOS EDD information
* from boot_params into a safe place.
*
*/
static inline void __init copy_edd(void)
{
memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
sizeof(edd.mbr_signature));
memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info));
edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries;
edd.edd_info_nr = boot_params.eddbuf_entries;
}
#else
static inline void __init copy_edd(void)
{
}
#endif
void * __init extend_brk(size_t size, size_t align)
{
size_t mask = align - 1;
void *ret;
BUG_ON(_brk_start == 0);
BUG_ON(align & mask);
_brk_end = (_brk_end + mask) & ~mask;
BUG_ON((char *)(_brk_end + size) > __brk_limit);
ret = (void *)_brk_end;
_brk_end += size;
memset(ret, 0, size);
return ret;
}
#ifdef CONFIG_X86_64
static void __init init_gbpages(void)
{
if (direct_gbpages && cpu_has_gbpages)
printk(KERN_INFO "Using GB pages for direct mapping\n");
else
direct_gbpages = 0;
}
#else
static inline void init_gbpages(void)
{
}
#endif
static void __init reserve_brk(void)
{
if (_brk_end > _brk_start)
reserve_early(__pa(_brk_start), __pa(_brk_end), "BRK");
/* Mark brk area as locked down and no longer taking any
new allocations */
_brk_start = 0;
}
#ifdef CONFIG_BLK_DEV_INITRD
#define MAX_MAP_CHUNK (NR_FIX_BTMAPS << PAGE_SHIFT)
static void __init relocate_initrd(void)
{
u64 ramdisk_image = boot_params.hdr.ramdisk_image;
u64 ramdisk_size = boot_params.hdr.ramdisk_size;
u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT;
u64 ramdisk_here;
unsigned long slop, clen, mapaddr;
char *p, *q;
/* We need to move the initrd down into lowmem */
ramdisk_here = find_e820_area(0, end_of_lowmem, ramdisk_size,
PAGE_SIZE);
if (ramdisk_here == -1ULL)
panic("Cannot find place for new RAMDISK of size %lld\n",
ramdisk_size);
/* Note: this includes all the lowmem currently occupied by
the initrd, we rely on that fact to keep the data intact. */
reserve_early(ramdisk_here, ramdisk_here + ramdisk_size,
"NEW RAMDISK");
initrd_start = ramdisk_here + PAGE_OFFSET;
initrd_end = initrd_start + ramdisk_size;
printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n",
ramdisk_here, ramdisk_here + ramdisk_size);
q = (char *)initrd_start;
/* Copy any lowmem portion of the initrd */
if (ramdisk_image < end_of_lowmem) {
clen = end_of_lowmem - ramdisk_image;
p = (char *)__va(ramdisk_image);
memcpy(q, p, clen);
q += clen;
ramdisk_image += clen;
ramdisk_size -= clen;
}
/* Copy the highmem portion of the initrd */
while (ramdisk_size) {
slop = ramdisk_image & ~PAGE_MASK;
clen = ramdisk_size;
if (clen > MAX_MAP_CHUNK-slop)
clen = MAX_MAP_CHUNK-slop;
mapaddr = ramdisk_image & PAGE_MASK;
p = early_memremap(mapaddr, clen+slop);
memcpy(q, p+slop, clen);
early_iounmap(p, clen+slop);
q += clen;
ramdisk_image += clen;
ramdisk_size -= clen;
}
x86: extend e820 ealy_res support 32bit move early_res related from e820_64.c to e820.c make edba detection to be done in head32.c remove smp_alloc_memory, because we have fixed trampoline address now. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 10 files changed, 320 insertions(+), 319 deletions(-) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-18 08:18:57 +00:00
/* high pages is not converted by early_res_to_bootmem */
ramdisk_image = boot_params.hdr.ramdisk_image;
ramdisk_size = boot_params.hdr.ramdisk_size;
printk(KERN_INFO "Move RAMDISK from %016llx - %016llx to"
" %08llx - %08llx\n",
ramdisk_image, ramdisk_image + ramdisk_size - 1,
ramdisk_here, ramdisk_here + ramdisk_size - 1);
}
static void __init reserve_initrd(void)
{
u64 ramdisk_image = boot_params.hdr.ramdisk_image;
u64 ramdisk_size = boot_params.hdr.ramdisk_size;
u64 ramdisk_end = ramdisk_image + ramdisk_size;
u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT;
if (!boot_params.hdr.type_of_loader ||
!ramdisk_image || !ramdisk_size)
return; /* No initrd provided by bootloader */
initrd_start = 0;
if (ramdisk_size >= (end_of_lowmem>>1)) {
free_early(ramdisk_image, ramdisk_end);
printk(KERN_ERR "initrd too large to handle, "
"disabling initrd\n");
return;
}
printk(KERN_INFO "RAMDISK: %08llx - %08llx\n", ramdisk_image,
ramdisk_end);
if (ramdisk_end <= end_of_lowmem) {
/* All in lowmem, easy case */
/*
* don't need to reserve again, already reserved early
* in i386_start_kernel
*/
initrd_start = ramdisk_image + PAGE_OFFSET;
initrd_end = initrd_start + ramdisk_size;
return;
}
relocate_initrd();
free_early(ramdisk_image, ramdisk_end);
}
#else
static void __init reserve_initrd(void)
{
}
#endif /* CONFIG_BLK_DEV_INITRD */
static void __init parse_setup_data(void)
{
struct setup_data *data;
u64 pa_data;
if (boot_params.hdr.version < 0x0209)
return;
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
data = early_memremap(pa_data, PAGE_SIZE);
switch (data->type) {
case SETUP_E820_EXT:
parse_e820_ext(data, pa_data);
break;
default:
break;
}
pa_data = data->next;
early_iounmap(data, PAGE_SIZE);
}
}
static void __init e820_reserve_setup_data(void)
{
struct setup_data *data;
u64 pa_data;
int found = 0;
if (boot_params.hdr.version < 0x0209)
return;
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
data = early_memremap(pa_data, sizeof(*data));
e820_update_range(pa_data, sizeof(*data)+data->len,
E820_RAM, E820_RESERVED_KERN);
found = 1;
pa_data = data->next;
early_iounmap(data, sizeof(*data));
}
if (!found)
return;
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
memcpy(&e820_saved, &e820, sizeof(struct e820map));
printk(KERN_INFO "extended physical RAM map:\n");
e820_print_map("reserve setup_data");
}
static void __init reserve_early_setup_data(void)
{
struct setup_data *data;
u64 pa_data;
char buf[32];
if (boot_params.hdr.version < 0x0209)
return;
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
data = early_memremap(pa_data, sizeof(*data));
sprintf(buf, "setup data %x", data->type);
reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf);
pa_data = data->next;
early_iounmap(data, sizeof(*data));
}
}
/*
* --------- Crashkernel reservation ------------------------------
*/
#ifdef CONFIG_KEXEC
static inline unsigned long long get_total_mem(void)
{
unsigned long long total;
total = max_pfn - min_low_pfn;
return total << PAGE_SHIFT;
}
static void __init reserve_crashkernel(void)
{
unsigned long long total_mem;
unsigned long long crash_size, crash_base;
int ret;
total_mem = get_total_mem();
ret = parse_crashkernel(boot_command_line, total_mem,
&crash_size, &crash_base);
if (ret != 0 || crash_size <= 0)
return;
/* 0 means: find the address automatically */
if (crash_base <= 0) {
const unsigned long long alignment = 16<<20; /* 16M */
crash_base = find_e820_area(alignment, ULONG_MAX, crash_size,
alignment);
if (crash_base == -1ULL) {
pr_info("crashkernel reservation failed - No suitable area found.\n");
return;
}
} else {
unsigned long long start;
start = find_e820_area(crash_base, ULONG_MAX, crash_size,
1<<20);
if (start != crash_base) {
pr_info("crashkernel reservation failed - memory is in use.\n");
return;
}
}
reserve_early(crash_base, crash_base + crash_size, "CRASH KERNEL");
printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
"for crashkernel (System RAM: %ldMB)\n",
(unsigned long)(crash_size >> 20),
(unsigned long)(crash_base >> 20),
(unsigned long)(total_mem >> 20));
crashk_res.start = crash_base;
crashk_res.end = crash_base + crash_size - 1;
insert_resource(&iomem_resource, &crashk_res);
}
#else
static void __init reserve_crashkernel(void)
{
}
#endif
static struct resource standard_io_resources[] = {
{ .name = "dma1", .start = 0x00, .end = 0x1f,
.flags = IORESOURCE_BUSY | IORESOURCE_IO },
{ .name = "pic1", .start = 0x20, .end = 0x21,
.flags = IORESOURCE_BUSY | IORESOURCE_IO },
{ .name = "timer0", .start = 0x40, .end = 0x43,
.flags = IORESOURCE_BUSY | IORESOURCE_IO },
{ .name = "timer1", .start = 0x50, .end = 0x53,
.flags = IORESOURCE_BUSY | IORESOURCE_IO },
{ .name = "keyboard", .start = 0x60, .end = 0x60,
.flags = IORESOURCE_BUSY | IORESOURCE_IO },
{ .name = "keyboard", .start = 0x64, .end = 0x64,
.flags = IORESOURCE_BUSY | IORESOURCE_IO },
{ .name = "dma page reg", .start = 0x80, .end = 0x8f,
.flags = IORESOURCE_BUSY | IORESOURCE_IO },
{ .name = "pic2", .start = 0xa0, .end = 0xa1,
.flags = IORESOURCE_BUSY | IORESOURCE_IO },
{ .name = "dma2", .start = 0xc0, .end = 0xdf,
.flags = IORESOURCE_BUSY | IORESOURCE_IO },
{ .name = "fpu", .start = 0xf0, .end = 0xff,
.flags = IORESOURCE_BUSY | IORESOURCE_IO }
};
void __init reserve_standard_io_resources(void)
{
int i;
/* request I/O space for devices used on all i[345]86 PCs */
for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
request_resource(&ioport_resource, &standard_io_resources[i]);
}
/*
* Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
* is_kdump_kernel() to determine if we are booting after a panic. Hence
* ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
*/
#ifdef CONFIG_CRASH_DUMP
/* elfcorehdr= specifies the location of elf core header
* stored by the crashed kernel. This option will be passed
* by kexec loader to the capture kernel.
*/
static int __init setup_elfcorehdr(char *arg)
{
char *end;
if (!arg)
return -EINVAL;
elfcorehdr_addr = memparse(arg, &end);
return end > arg ? 0 : -EINVAL;
}
early_param("elfcorehdr", setup_elfcorehdr);
#endif
#ifdef CONFIG_X86_RESERVE_LOW_64K
static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
{
printk(KERN_NOTICE
"%s detected: BIOS may corrupt low RAM, working around it.\n",
d->ident);
e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED);
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
return 0;
}
#endif
/* List of systems that have known low memory corruption BIOS problems */
static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
#ifdef CONFIG_X86_RESERVE_LOW_64K
{
.callback = dmi_low_memory_corruption,
.ident = "AMI BIOS",
.matches = {
DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
},
},
{
.callback = dmi_low_memory_corruption,
.ident = "Phoenix BIOS",
.matches = {
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
},
},
{
.callback = dmi_low_memory_corruption,
.ident = "Phoenix/MSC BIOS",
.matches = {
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"),
},
},
/*
* AMI BIOS with low memory corruption was found on Intel DG45ID and
* DG45FC boards.
* It has a different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
* match only DMI_BOARD_NAME and see if there is more bad products
* with this vendor.
*/
{
.callback = dmi_low_memory_corruption,
.ident = "AMI BIOS",
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
},
},
{
.callback = dmi_low_memory_corruption,
.ident = "AMI BIOS",
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "DG45FC"),
},
},
#endif
{}
};
static void __init trim_bios_range(void)
{
/*
* A special case is the first 4Kb of memory;
* This is a BIOS owned area, not kernel ram, but generally
* not listed as such in the E820 table.
*/
e820_update_range(0, PAGE_SIZE, E820_RAM, E820_RESERVED);
/*
* special case: Some BIOSen report the PC BIOS
* area (640->1Mb) as ram even though it is not.
* take them out.
*/
e820_remove_range(BIOS_BEGIN, BIOS_END - BIOS_BEGIN, E820_RAM, 1);
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
}
/*
* Determine if we were loaded by an EFI loader. If so, then we have also been
* passed the efi memmap, systab, etc., so we should use these data structures
* for initialization. Note, the efi init code path is determined by the
* global efi_enabled. This allows the same kernel image to be used on existing
* systems (with a traditional BIOS) as well as on EFI systems.
*/
/*
* setup_arch - architecture-specific boot-time initializations
*
* Note: On x86_64, fixmaps are ready for use even before this is called.
*/
void __init setup_arch(char **cmdline_p)
{
x86: Export k8 physical topology To eventually interleave emulated nodes over physical nodes, we need to know the physical topology of the machine without actually registering it. This does the k8 node setup in two parts: detection and registration. NUMA emulation can then used the physical topology detected to setup the address ranges of emulated nodes accordingly. If emulation isn't used, the k8 nodes are registered as normal. Two formals are added to the x86 NUMA setup functions: `acpi' and `k8'. These represent whether ACPI or K8 NUMA has been detected; both cannot be true at the same time. This specifies to the NUMA emulation code whether an underlying physical NUMA topology exists and which interface to use. This patch deals solely with separating the k8 setup path into Northbridge detection and registration steps and leaves the ACPI changes for a subsequent patch. The `acpi' formal is added here, however, to avoid touching all the header files again in the next patch. This approach also ensures emulated nodes will not span physical nodes so the true memory latency is not misrepresented. k8_get_nodes() may now be used to export the k8 physical topology of the machine for NUMA emulation. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Ankita Garg <ankita@in.ibm.com> Cc: Len Brown <len.brown@intel.com> LKML-Reference: <alpine.DEB.1.00.0909251518400.14754@chino.kir.corp.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-25 22:20:00 +00:00
int acpi = 0;
int k8 = 0;
#ifdef CONFIG_X86_32
memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
visws_early_detect();
#else
printk(KERN_INFO "Command line: %s\n", boot_command_line);
#endif
/* VMI may relocate the fixmap; do this before touching ioremap area */
vmi_init();
early_cpu_init();
early_ioremap_init();
ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
screen_info = boot_params.screen_info;
edid_info = boot_params.edid_info;
#ifdef CONFIG_X86_32
apm_info.bios = boot_params.apm_bios_info;
ist_info = boot_params.ist_info;
if (boot_params.sys_desc_table.length != 0) {
set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
machine_id = boot_params.sys_desc_table.table[0];
machine_submodel_id = boot_params.sys_desc_table.table[1];
BIOS_revision = boot_params.sys_desc_table.table[2];
}
#endif
saved_video_mode = boot_params.hdr.vid_mode;
bootloader_type = boot_params.hdr.type_of_loader;
if ((bootloader_type >> 4) == 0xe) {
bootloader_type &= 0xf;
bootloader_type |= (boot_params.hdr.ext_loader_type+0x10) << 4;
}
bootloader_version = bootloader_type & 0xf;
bootloader_version |= boot_params.hdr.ext_loader_ver << 4;
#ifdef CONFIG_BLK_DEV_RAM
rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
rd_prompt = ((boot_params.hdr.ram_size & RAMDISK_PROMPT_FLAG) != 0);
rd_doload = ((boot_params.hdr.ram_size & RAMDISK_LOAD_FLAG) != 0);
#endif
#ifdef CONFIG_EFI
if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
#ifdef CONFIG_X86_32
"EL32",
#else
"EL64",
#endif
4)) {
efi_enabled = 1;
efi_reserve_early();
}
#endif
x86_init.oem.arch_setup();
setup_memory_map();
parse_setup_data();
/* update the e820_saved too */
e820_reserve_setup_data();
copy_edd();
if (!boot_params.hdr.root_flags)
root_mountflags &= ~MS_RDONLY;
init_mm.start_code = (unsigned long) _text;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
2009-02-27 01:35:44 +00:00
init_mm.brk = _brk_end;
code_resource.start = virt_to_phys(_text);
code_resource.end = virt_to_phys(_etext)-1;
data_resource.start = virt_to_phys(_etext);
data_resource.end = virt_to_phys(_edata)-1;
bss_resource.start = virt_to_phys(&__bss_start);
bss_resource.end = virt_to_phys(&__bss_stop)-1;
#ifdef CONFIG_CMDLINE_BOOL
#ifdef CONFIG_CMDLINE_OVERRIDE
strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
#else
if (builtin_cmdline[0]) {
/* append boot loader cmdline to builtin */
strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
}
#endif
#endif
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
/*
* x86_configure_nx() is called before parse_early_param() to detect
* whether hardware doesn't support NX (so that the early EHCI debug
* console setup can safely call set_fixmap()). It may then be called
* again from within noexec_setup() during parsing early parameters
* to honor the respective command line option.
*/
x86_configure_nx();
parse_early_param();
x86_report_nx();
/* Must be before kernel pagetables are setup */
vmi_activate();
/* after early param, so could get panic from serial */
reserve_early_setup_data();
if (acpi_mps_check()) {
#ifdef CONFIG_X86_LOCAL_APIC
disable_apic = 1;
#endif
setup_clear_cpu_cap(X86_FEATURE_APIC);
}
#ifdef CONFIG_PCI
if (pci_early_dump_regs)
early_dump_pci_devices();
#endif
finish_e820_parsing();
if (efi_enabled)
efi_init();
dmi_scan_machine();
dmi_check_system(bad_bios_dmi_table);
x86: Hypervisor detection and get tsc_freq from hypervisor Impact: Changes timebase calibration on Vmware. v3->v2 : Abstract the hypervisor detection and feature (tsc_freq) request behind a hypervisor.c file v2->v1 : Add a x86_hyper_vendor field to the cpuinfo_x86 structure. This avoids multiple calls to the hypervisor detection function. This patch adds function to detect if we are running under VMware. The current way to check if we are on VMware is following, # check if "hypervisor present bit" is set, if so read the 0x40000000 cpuid leaf and check for "VMwareVMware" signature. # if the above fails, check the DMI vendors name for "VMware" string if we find one we query the VMware hypervisor port to check if we are under VMware. The DMI + "VMware hypervisor port check" is needed for older VMware products, which don't implement the hypervisor signature cpuid leaf. Also note that since we are checking for the DMI signature the hypervisor port should never be accessed on native hardware. This patch also adds a hypervisor_get_tsc_freq function, instead of calibrating the frequency which can be error prone in virtualized environment, we ask the hypervisor for it. We get the frequency from the hypervisor by accessing the hypervisor port if we are running on VMware. Other hypervisors too can add code to the generic routine to get frequency on their platform. Signed-off-by: Alok N Kataria <akataria@vmware.com> Signed-off-by: Dan Hecht <dhecht@vmware.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-27 17:41:46 +00:00
/*
* VMware detection requires dmi to be available, so this
* needs to be done after dmi_scan_machine, for the BP.
*/
init_hypervisor_platform();
x86: Hypervisor detection and get tsc_freq from hypervisor Impact: Changes timebase calibration on Vmware. v3->v2 : Abstract the hypervisor detection and feature (tsc_freq) request behind a hypervisor.c file v2->v1 : Add a x86_hyper_vendor field to the cpuinfo_x86 structure. This avoids multiple calls to the hypervisor detection function. This patch adds function to detect if we are running under VMware. The current way to check if we are on VMware is following, # check if "hypervisor present bit" is set, if so read the 0x40000000 cpuid leaf and check for "VMwareVMware" signature. # if the above fails, check the DMI vendors name for "VMware" string if we find one we query the VMware hypervisor port to check if we are under VMware. The DMI + "VMware hypervisor port check" is needed for older VMware products, which don't implement the hypervisor signature cpuid leaf. Also note that since we are checking for the DMI signature the hypervisor port should never be accessed on native hardware. This patch also adds a hypervisor_get_tsc_freq function, instead of calibrating the frequency which can be error prone in virtualized environment, we ask the hypervisor for it. We get the frequency from the hypervisor by accessing the hypervisor port if we are running on VMware. Other hypervisors too can add code to the generic routine to get frequency on their platform. Signed-off-by: Alok N Kataria <akataria@vmware.com> Signed-off-by: Dan Hecht <dhecht@vmware.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-27 17:41:46 +00:00
x86_init.resources.probe_roms();
/* after parse_early_param, so could debug it */
insert_resource(&iomem_resource, &code_resource);
insert_resource(&iomem_resource, &data_resource);
insert_resource(&iomem_resource, &bss_resource);
trim_bios_range();
#ifdef CONFIG_X86_32
if (ppro_with_ram_bug()) {
e820_update_range(0x70000000ULL, 0x40000ULL, E820_RAM,
E820_RESERVED);
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
printk(KERN_INFO "fixed physical RAM map:\n");
e820_print_map("bad_ppro");
}
#else
early_gart_iommu_check();
#endif
/*
* partially used pages are not usable - thus
* we are rounding upwards:
*/
max_pfn = e820_end_of_ram_pfn();
/* preallocate 4k for mptable mpc */
early_reserve_e820_mpc_new();
/* update e820 for memory not covered by WB MTRRs */
mtrr_bp_init();
if (mtrr_trim_uncached_memory(max_pfn))
max_pfn = e820_end_of_ram_pfn();
#ifdef CONFIG_X86_32
/* max_low_pfn get updated here */
find_low_pfn_range();
#else
num_physpages = max_pfn;
check_x2apic();
/* How many end-of-memory variables you have, grandma! */
/* need this before calling reserve_initrd */
if (max_pfn > (1UL<<(32 - PAGE_SHIFT)))
max_low_pfn = e820_end_of_low_ram_pfn();
else
max_low_pfn = max_pfn;
high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
max_pfn_mapped = KERNEL_IMAGE_SIZE >> PAGE_SHIFT;
#endif
#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
setup_bios_corruption_check();
#endif
printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n",
max_pfn_mapped<<PAGE_SHIFT);
2009-02-27 01:35:44 +00:00
reserve_brk();
/*
* Find and reserve possible boot-time SMP configuration:
*/
find_smp_config();
reserve_trampoline_memory();
#ifdef CONFIG_ACPI_SLEEP
/*
* Reserve low memory region for sleep support.
* even before init_memory_mapping
*/
acpi_reserve_wakeup_memory();
#endif
init_gbpages();
/* max_pfn_mapped is updated here */
max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
max_pfn_mapped = max_low_pfn_mapped;
#ifdef CONFIG_X86_64
if (max_pfn > max_low_pfn) {
max_pfn_mapped = init_memory_mapping(1UL<<32,
max_pfn<<PAGE_SHIFT);
/* can we preseve max_low_pfn ?*/
max_low_pfn = max_pfn;
}
#endif
/*
* NOTE: On x86-32, only from this point on, fixmaps are ready for use.
*/
#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
if (init_ohci1394_dma_early)
init_ohci1394_dma_on_all_controllers();
#endif
reserve_initrd();
reserve_crashkernel();
vsmp_init();
io_delay_init();
/*
* Parse the ACPI tables for possible boot-time SMP configuration.
*/
acpi_boot_table_init();
early_acpi_boot_init();
#ifdef CONFIG_ACPI_NUMA
/*
* Parse SRAT to discover nodes.
*/
acpi = acpi_numa_init();
#endif
x86: Export k8 physical topology To eventually interleave emulated nodes over physical nodes, we need to know the physical topology of the machine without actually registering it. This does the k8 node setup in two parts: detection and registration. NUMA emulation can then used the physical topology detected to setup the address ranges of emulated nodes accordingly. If emulation isn't used, the k8 nodes are registered as normal. Two formals are added to the x86 NUMA setup functions: `acpi' and `k8'. These represent whether ACPI or K8 NUMA has been detected; both cannot be true at the same time. This specifies to the NUMA emulation code whether an underlying physical NUMA topology exists and which interface to use. This patch deals solely with separating the k8 setup path into Northbridge detection and registration steps and leaves the ACPI changes for a subsequent patch. The `acpi' formal is added here, however, to avoid touching all the header files again in the next patch. This approach also ensures emulated nodes will not span physical nodes so the true memory latency is not misrepresented. k8_get_nodes() may now be used to export the k8 physical topology of the machine for NUMA emulation. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Ankita Garg <ankita@in.ibm.com> Cc: Len Brown <len.brown@intel.com> LKML-Reference: <alpine.DEB.1.00.0909251518400.14754@chino.kir.corp.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-25 22:20:00 +00:00
#ifdef CONFIG_K8_NUMA
if (!acpi)
k8 = !k8_numa_init(0, max_pfn);
x86: Export k8 physical topology To eventually interleave emulated nodes over physical nodes, we need to know the physical topology of the machine without actually registering it. This does the k8 node setup in two parts: detection and registration. NUMA emulation can then used the physical topology detected to setup the address ranges of emulated nodes accordingly. If emulation isn't used, the k8 nodes are registered as normal. Two formals are added to the x86 NUMA setup functions: `acpi' and `k8'. These represent whether ACPI or K8 NUMA has been detected; both cannot be true at the same time. This specifies to the NUMA emulation code whether an underlying physical NUMA topology exists and which interface to use. This patch deals solely with separating the k8 setup path into Northbridge detection and registration steps and leaves the ACPI changes for a subsequent patch. The `acpi' formal is added here, however, to avoid touching all the header files again in the next patch. This approach also ensures emulated nodes will not span physical nodes so the true memory latency is not misrepresented. k8_get_nodes() may now be used to export the k8 physical topology of the machine for NUMA emulation. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Ankita Garg <ankita@in.ibm.com> Cc: Len Brown <len.brown@intel.com> LKML-Reference: <alpine.DEB.1.00.0909251518400.14754@chino.kir.corp.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-25 22:20:00 +00:00
#endif
initmem_init(0, max_pfn, acpi, k8);
#ifndef CONFIG_NO_BOOTMEM
early_res_to_bootmem(0, max_low_pfn<<PAGE_SHIFT);
#endif
dma32_reserve_bootmem();
reserve_ibft_region();
#ifdef CONFIG_KVM_CLOCK
kvmclock_init();
#endif
x86_init.paging.pagetable_setup_start(swapper_pg_dir);
paging_init();
x86_init.paging.pagetable_setup_done(swapper_pg_dir);
x86: early boot debugging via FireWire (ohci1394_dma=early) This patch adds a new configuration option, which adds support for a new early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch() to decide wether OHCI-1394 FireWire controllers should be initialized and enabled for physical DMA access to allow remote debugging of early problems like issues ACPI or other subsystems which are executed very early. If the config option is not enabled, no code is changed, and if the boot paramenter is not given, no new code is executed, and independent of that, all new code is freed after boot, so the config option can be even enabled in standard, non-debug kernels. With specialized tools, it is then possible to get debugging information from machines which have no serial ports (notebooks) such as the printk buffer contents, or any data which can be referenced from global pointers, if it is stored below the 4GB limit and even memory dumps of of the physical RAM region below the 4GB limit can be taken without any cooperation from the CPU of the host, so the machine can be crashed early, it does not matter. In the extreme, even kernel debuggers can be accessed in this way. I wrote a small kgdb module and an accompanying gdb stub for FireWire which allows to gdb to talk to kgdb using remote remory reads and writes over FireWire. An version of the gdb stub fore FireWire is able to read all global data from a system which is running a a normal kernel without any kernel debugger, without any interruption or support of the system's CPU. That way, e.g. the task struct and so on can be read and even manipulated when the physical DMA access is granted. A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt and I've put a copy online at ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt It also has links to all the tools which are available to make use of it another copy of it is online at: ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diff Signed-Off-By: Bernhard Kaindl <bk@suse.de> Tested-By: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:34:11 +00:00
x86, intel_txt: Intel TXT boot support This patch adds kernel configuration and boot support for Intel Trusted Execution Technology (Intel TXT). Intel's technology for safer computing, Intel Trusted Execution Technology (Intel TXT), defines platform-level enhancements that provide the building blocks for creating trusted platforms. Intel TXT was formerly known by the code name LaGrande Technology (LT). Intel TXT in Brief: o Provides dynamic root of trust for measurement (DRTM) o Data protection in case of improper shutdown o Measurement and verification of launched environment Intel TXT is part of the vPro(TM) brand and is also available some non-vPro systems. It is currently available on desktop systems based on the Q35, X38, Q45, and Q43 Express chipsets (e.g. Dell Optiplex 755, HP dc7800, etc.) and mobile systems based on the GM45, PM45, and GS45 Express chipsets. For more information, see http://www.intel.com/technology/security/. This site also has a link to the Intel TXT MLE Developers Manual, which has been updated for the new released platforms. A much more complete description of how these patches support TXT, how to configure a system for it, etc. is in the Documentation/intel_txt.txt file in this patch. This patch provides the TXT support routines for complete functionality, documentation for TXT support and for the changes to the boot_params structure, and boot detection of a TXT launch. Attempts to shutdown (reboot, Sx) the system will result in platform resets; subsequent patches will support these shutdown modes properly. Documentation/intel_txt.txt | 210 +++++++++++++++++++++ Documentation/x86/zero-page.txt | 1 arch/x86/include/asm/bootparam.h | 3 arch/x86/include/asm/fixmap.h | 3 arch/x86/include/asm/tboot.h | 197 ++++++++++++++++++++ arch/x86/kernel/Makefile | 1 arch/x86/kernel/setup.c | 4 arch/x86/kernel/tboot.c | 379 +++++++++++++++++++++++++++++++++++++++ security/Kconfig | 30 +++ 9 files changed, 827 insertions(+), 1 deletion(-) Signed-off-by: Joseph Cihula <joseph.cihula@intel.com> Signed-off-by: Shane Wang <shane.wang@intel.com> Signed-off-by: Gang Wei <gang.wei@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-01 02:30:59 +00:00
tboot_probe();
#ifdef CONFIG_X86_64
map_vsyscall();
#endif
generic_apic_probe();
early_quirks();
/*
* Read APIC and some other early information from ACPI tables.
*/
acpi_boot_init();
sfi_init();
/*
* get boot-time SMP configuration:
*/
if (smp_found_config)
get_smp_config();
prefill_possible_map();
#ifdef CONFIG_X86_64
init_cpu_to_node();
#endif
init_apic_mappings();
ioapic_init_mappings();
/* need to wait for io_apic is mapped */
probe_nr_irqs_gsi();
kvm_guest_init();
e820_reserve_resources();
e820_mark_nosave_regions(max_low_pfn);
x86_init.resources.reserve_resources();
e820_setup_gap();
#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
conswitchp = &vga_con;
#elif defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
#endif
#endif
x86_init.oem.banner();
mcheck_init();
}
#ifdef CONFIG_X86_32
static struct resource video_ram_resource = {
.name = "Video RAM area",
.start = 0xa0000,
.end = 0xbffff,
.flags = IORESOURCE_BUSY | IORESOURCE_MEM
};
void __init i386_reserve_resources(void)
{
request_resource(&iomem_resource, &video_ram_resource);
reserve_standard_io_resources();
}
#endif /* CONFIG_X86_32 */