47 lines
1.7 KiB
Markdown
47 lines
1.7 KiB
Markdown
### Introduction
|
|
|
|
This is the Hackerspace Warsaw electronic lock mk2 project.
|
|
|
|
Work in progress! This is a prototype for a TP-Link WR703n based hardware
|
|
solution - with a I2C bus on which there is a MAX7300 IO expander and a PN532
|
|
NFC tag reader. The I2C is software bit-banged by the kernel, drivers for both
|
|
the IO expander and the PN532 are written in Lua.
|
|
|
|
### Overview
|
|
|
|
The hacklock is mae out of two separate pieces of hardware:
|
|
|
|
* The main lock unit, which runs Linux on a low-power SoC, has one I2C bus
|
|
to communicate with an NFC reader and some GPIO, and a second I2C bus to
|
|
communicate with:
|
|
* The keypad, which is a 10-key (or more) physical keypad attached externally,
|
|
and is based around and ATMega8 uC (they're cheap!)
|
|
|
|
### Current hardware status
|
|
|
|
Right now the project is in a prototype status. The keypad part is nearly
|
|
identical to what will be in production, except that the PCB is home-etched.
|
|
|
|
The main lock part itself is however based on a TP-Link WR703N router with
|
|
OpenWRT and a software I2C bus. In the future, it will probably be replaced
|
|
woth a custom i.MX233-based 4-layer board.
|
|
|
|
### Files
|
|
|
|
* **software/**
|
|
* **main/** - code for the central unit of the lock
|
|
* **main.lua** - main Lua script
|
|
* lua-libs/ - other Lua libraries
|
|
* mips-bin/ - C libraries compiled for MIPS/OpenWRT
|
|
* luai2c.tar.gz** - C i2c library source
|
|
* luasha2.tar.gz - C sha2 library source
|
|
* **keypad/** - AVR code for the keypad
|
|
* Makefile - the makefile for the keypad firmware
|
|
* **hardware/**
|
|
* keypad/ - KiCAD files for the keypad PCB
|
|
|
|
### Hacking
|
|
|
|
Feel free to hack around. The whole project, however, is not anywhere near
|
|
release, so things will change around and probably make no sense at the moment.
|