Python: module skeinforge_application.skeinforge_plugins.craft

skeinforge_application.skeinforge_plugins.craft_plugins.chamber ($Date: 2008/21/04 $)

index
/home/enrique/Desktop/backup/babbleold/script/reprap/fabmetheus/skeinforge_application/skeinforge_plugins/craft_plugins/chamber.py

Previous / Next / Contents

Some filaments contract too much and warp the extruded object. To prevent this you have to print the object in a temperature regulated chamber and/or on a temperature regulated bed. The chamber tool allows you to control the bed and chamber temperature and the holding pressure. The chamber gcodes are also described at: http://reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes The chamber manual page is at: http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Chamber Operation Settings Bed Bed Temperature Bed Temperature Begin Change Height Bed Temperature End Change Height Bed Temperature End Chamber Temperature Holding Force Heated Beds Bothacker Domingo Jmil Metalab Nophead Prusajr Zaggo Examples

`Operation`

The default 'Activate Chamber' checkbox is on. When it is on, the functions described below will work, when it is off, nothing will be done. Settings Bed The initial bed temperature is defined by 'Bed Temperature'. If the 'Bed Temperature End Change Height' is greater or equal to the 'Bed Temperature Begin Change Height' and the 'Bed Temperature Begin Change Height' is greater or equal to zero, then the temperature will be ramped toward the 'Bed Temperature End'. The ramp will start once the extruder reaches the 'Bed Temperature Begin Change Height', then the bed temperature will approach the 'Bed Temperature End' as the extruder reaches the 'Bed Temperature End Change Height', finally the bed temperature will stay at the 'Bed Temperature End' for the remainder of the build. Bed Temperature Default: 60C Defines the initial print bed temperature in Celcius by adding an M140 command. Bed Temperature Begin Change Height Default: -1 mm Defines the height of the beginning of the temperature ramp. If the 'Bed Temperature End Change Height' is less than zero, the bed temperature will remain at the initial 'Bed Temperature'. Bed Temperature End Change Height Default: -1 mm Defines the height of the end of the temperature ramp. If the 'Bed Temperature End Change Height' is less than zero or less than the 'Bed Temperature Begin Change Height', the bed temperature will remain at the initial 'Bed Temperature'. Bed Temperature End Default: 20C Defines the end bed temperature if there is a temperature ramp. Chamber Temperature Default: 30C Defines the chamber temperature in Celcius by adding an M141 command. Holding Force Default: 0 Defines the holding pressure of a mechanism, like a vacuum table or electromagnet, to hold the bed surface or object, by adding an M142 command. The holding pressure is in bars. For hardware which only has on/off holding, when the holding pressure is zero, turn off holding, when the holding pressure is greater than zero, turn on holding. Heated Beds Bothacker A resistor heated aluminum plate by Bothacker: http://bothacker.com with an article at: http://bothacker.com/2009/12/18/heated-build-platform/ Domingo A heated copper build plate by Domingo: http://casainho-emcrepstrap.blogspot.com/ with articles at: http://casainho-emcrepstrap.blogspot.com/2010/01/first-time-with-pla-testing-it-also-on.html http://casainho-emcrepstrap.blogspot.com/2010/01/call-for-helpideas-to-develop-heated.html http://casainho-emcrepstrap.blogspot.com/2010/01/new-heated-build-platform.html http://casainho-emcrepstrap.blogspot.com/2010/01/no-acrylic-and-instead-kapton-tape-on.html http://casainho-emcrepstrap.blogspot.com/2010/01/problems-with-heated-build-platform-and.html http://casainho-emcrepstrap.blogspot.com/2010/01/perfect-build-platform.html http://casainho-emcrepstrap.blogspot.com/2009/12/almost-no-warp.html http://casainho-emcrepstrap.blogspot.com/2009/12/heated-base-plate.html Jmil A heated build stage by jmil, over at: http://www.hive76.org with articles at: http://www.hive76.org/handling-hot-build-surfaces http://www.hive76.org/heated-build-stage-success Metalab A heated base by the Metalab folks: http://reprap.soup.io with information at: http://reprap.soup.io/?search=heated%20base Nophead A resistor heated aluminum bed by Nophead: http://hydraraptor.blogspot.com with articles at: http://hydraraptor.blogspot.com/2010/01/will-it-stick.html http://hydraraptor.blogspot.com/2010/01/hot-metal-and-serendipity.html http://hydraraptor.blogspot.com/2010/01/new-year-new-plastic.html http://hydraraptor.blogspot.com/2010/01/hot-bed.html Prusajr A resistive wire heated plexiglass plate by prusajr: http://prusadjs.cz/ with articles at: http://prusadjs.cz/2010/01/heated-reprap-print-bed-mk2/ http://prusadjs.cz/2009/11/look-ma-no-warping-heated-reprap-print-bed/ Zaggo A resistor heated aluminum plate by Zaggo at Pleasant Software: http://pleasantsoftware.com/developer/3d/ with articles at: http://pleasantsoftware.com/developer/3d/2009/12/05/raftless/ http://pleasantsoftware.com/developer/3d/2009/11/15/living-in-times-of-warp-free-printing/ http://pleasantsoftware.com/developer/3d/2009/11/12/canned-heat/ Examples The following examples chamber the file Screw Holder Bottom.stl. The examples are run in a terminal in the folder which contains Screw Holder Bottom.stl and chamber.py. > python chamber.py This brings up the chamber dialog. > python chamber.py Screw Holder Bottom.stl The chamber tool is parsing the file: Screw Holder Bottom.stl .. The chamber tool has created the file: Screw Holder Bottom_chamber.gcode

Previous / Next / Contents

Modules

__init__
fabmetheus_utilities.archive
fabmetheus_utilities.euclidean
fabmetheus_utilities.fabmetheus_tools.fabmetheus_interpret
fabmetheus_utilities.gcodec
fabmetheus_utilities.settings
skeinforge_application.skeinforge_utilities.skeinforge_craft
skeinforge_application.skeinforge_utilities.skeinforge_polyfile
skeinforge_application.skeinforge_utilities.skeinforge_profile
sys

Classes



ChamberRepository
ChamberSkein

class ChamberRepository

    A class to handle the chamber settings.

Methods defined here:

__init__(self)
Set the default settings, execute title & settings fileName.

execute(self)
Chamber button has been clicked.

class ChamberSkein

    A class to chamber a skein of extrusions.

Methods defined here:

__init__(self)
Initialize.

addBedTemperature(self, bedTemperature)
Add bed temperature if it is different from the old.

getCraftedGcode(self, gcodeText, repository)
Parse gcode text and store the chamber gcode.

parseInitialization(self)
Parse gcode initialization and store the parameters.

parseLine(self, line)
Parse a gcode line and add it to the chamber skein.

Functions

getCraftedText(fileName, text='', repository=None)
Chamber the file or text.

getCraftedTextFromText(gcodeText, repository=None)
Chamber a gcode linear move text.

getNewRepository()
Get new repository.

main()
Display the chamber dialog.

writeOutput(fileName, shouldAnalyze=True)
Chamber a gcode linear move file.

Data

__author__ = 'Enrique Perez (perez_enrique@yahoo.com)'
__date__ = '$Date: 2008/21/04 $'
__license__ = 'GNU Affero General Public License http://www.gnu.org/licenses/agpl.html'
absolute_import = _Feature((2, 5, 0, 'alpha', 1), (2, 7, 0, 'alpha', 0), 16384)

Author

Enrique Perez (perez_enrique@yahoo.com)

Data
		__author__ = 'Enrique Perez (perez_enrique@yahoo.com)' __date__ = '$Date: 2008/21/04 $' __license__ = 'GNU Affero General Public License http://www.gnu.org/licenses/agpl.html' absolute_import = _Feature((2, 5, 0, 'alpha', 1), (2, 7, 0, 'alpha', 0), 16384)