ce7ccc136b
Properly handle failed uploads: display message, reset upload status
2013-08-25 15:03:27 +02:00
d51aa65cd2
Added .gco to supported extensions
2013-08-25 14:05:52 +02:00
3e0abf1b20
New custom control type "feedback"
...
Like "feedback_command", but without the button
2013-08-21 20:33:55 +02:00
6ab8b76859
Allow more than one local network to be defined
2013-08-18 22:50:52 +02:00
5631a45006
Check if self._comm is None before trying to select a file...
2013-08-18 18:41:20 +02:00
ae09a50fe5
Only match "rs"/"resend" on the start of a line, otherwise the wrong lines might be interpreted as resend requests
2013-08-18 18:40:52 +02:00
2261ddf41f
Properly enable serial logging on startup if configured
2013-08-18 18:40:08 +02:00
54175d2146
First throw at autologin capabilities
2013-08-18 18:33:21 +02:00
94b8d6601d
Allow sending temperature updates with enter
...
Also some refactoring.
Closes #208 .
2013-08-11 22:25:47 +02:00
84ff4b6416
Refactored ui.js into single files, cleaned up js folder
...
TODO: minimizer for merging all files belonging to the actual app into one
2013-08-11 19:15:37 +02:00
ec9c7adf70
Merge branch 'CapnBry-gcodeinterpreter-upstream' into devel
2013-08-11 17:39:53 +02:00
c7501ded47
Removed commented out and unused code
2013-08-11 17:39:45 +02:00
f622e1e181
And a robots.txt for good measure...
2013-08-11 16:57:39 +02:00
b168ef7e74
Only enable "Keep Enabled" button if data entered into form is valid. Also changed the wording a bit here and there.
2013-08-10 23:39:07 +02:00
4cf041aaad
Enforces a new first-run setup wizard for access control to be run and forbids running OctoPrint as root unless a special command option is supplied
...
The dialog also informs about the risk of unauthorized strangers (mis)using the printer if an unsecured OctoPrint installation is made available on the internet.
2013-08-10 21:59:05 +02:00
27bc7d3d03
Increase progress callback to every 1000 lines.
...
The processor handles 2500 lines per second on a 700MHz pi so as a baseline
that's still 2.5 updates per second.
2013-08-07 11:23:40 -04:00
821c0c9abb
Don't store layers or path points to save memory
2013-08-07 11:08:08 -04:00
1726e85a68
Merge gcodeInterpreter optimizations from daid/Cura
2013-08-07 11:01:48 -04:00
3b3bb36377
Fixed typo (flip{X|Y} => flip{H|V})
...
Thanks to @spapadim for the heads-up
2013-08-05 17:42:56 +02:00
e7f5384427
Refresh gcode visualization if the selected file is modified
...
This passes the file modification time to the javascript side and if
they don't match then the file is re-downloaded and parsed. The mtime
is also used in the AJAX request as it prevents the browser from serving
the new request from cache.
2013-07-21 06:48:06 -04:00
566933a765
Merge branch 'CapnBry-job-metaupdate' into devel
2013-07-20 16:20:42 +02:00
2cafc6114d
Just in case we'll use subfolders in the future...
2013-07-20 16:20:34 +02:00
f0746a4140
Merge branch 'master' into devel
2013-07-20 16:02:40 +02:00
31d86cd0a2
Added left space on filesystem holding the uploads folder to the gcode files list
...
Closes #186
2013-07-20 16:01:17 +02:00
e16f95069a
Added a note to please create pull requests against devel
2013-07-15 17:54:28 +02:00
48408910b5
Remove superfluous selectedFile setting as setJobData does that
2013-07-14 11:31:55 -04:00
8f6d536b8f
Update job metadata when the gcodemanager signals a change
2013-07-14 11:26:14 -04:00
fb9fd7e6c9
Fix metadata removal on upload for files with un-sane characters in them
...
When re-uploading a file with characters that will be later sanitized,
the old metadata entry wasn't removed because it checked the unsane
filename rather than the sanitized version that will later be stored.
This was creating an inconsistent metadata view during analysis for
files with spaces in them.
2013-07-14 11:20:37 -04:00
22ea55746c
Overall better gcode file handling
...
See #182 and https://groups.google.com/forum/#!topic/octoprint/YnOzyToxfkI
2013-07-13 16:30:41 +02:00
c6a749c684
Properly disable connection configuration when connected
2013-07-13 10:44:09 +02:00
92b42dd583
Merge remote-tracking branch 'CapnBry/temphistfix' into devel
2013-07-13 09:59:50 +02:00
6e50d37e51
Fixed key error
2013-07-09 22:19:58 +02:00
d6553a29c6
First throw at clustering of settings
2013-07-09 21:41:26 +02:00
31698d3543
First version of setup.py for packaging OctoPrint
2013-07-09 21:39:07 +02:00
9038bc2bcd
Cleaned up a bit in .gitignore
2013-07-09 21:37:14 +02:00
7d51b32476
Fix initial temperatureHistory load not containing any data
2013-07-09 14:54:32 -04:00
c33c32410b
Added configurable pause triggers to be able to react to custom firmware messages with pausing/unpausing/pause toggling
2013-07-08 18:01:10 +02:00
8dcbb620bb
Highlight currently selected file, disable deletion and load/loadAndPrint for it
...
Fixed #182
2013-07-07 23:27:22 +02:00
7d85860195
Reset view to first page in file lists when filters are changed
2013-07-07 14:18:08 +02:00
c9e261df32
Use absolute values for self._serial.timeout, not relative ones
...
Thanks to @spapadim for spotting this
2013-07-05 16:58:00 +02:00
6d3e3221b8
Added timeout settings for serial communiction, initial connection and baudrate detection
...
Closes #126
2013-07-04 21:26:53 +02:00
3ffaaa19be
Merge branch 'master' into devel
2013-07-01 15:26:00 +02:00
407c61cb24
Removed contents that are now found on the website, added note regarding filing bug reports
2013-07-01 15:23:40 +02:00
aa9d92417a
Removed peakZ again, doesn't work this way
...
Slicers might raise the print head first for a "nose dive" onto the print platform, leading to a high peakZ already dialed in, with no way to get it down again. This way events won't be fired until the print reaches the height of the initial starting point. As a z-change is a z-change if z changes, we'll just fire the event now (if oldZ != newZ). Event consumers will have to think of a way to filter out the noise.
(cherry picked from commit 9227bb5
2013-06-30 22:28:04 +02:00
e62578eb11
Reset peakZ on new print
...
(cherry picked from commit 83a864d
2013-06-30 22:27:43 +02:00
44f1f01001
Allow enabling of serial logging at runtime
2013-06-30 22:18:29 +02:00
f14acf8ba7
Fix height of terminal output to 340 px
2013-06-30 21:17:22 +02:00
119ee338f1
Client side filtering of M105 request/response and M27 request/response
...
Since it's client side, if you leave these on when not printing, the log will go completely blank over time due to filling up with M105s. Re-enabling M105s will immediately restore the whole log (although it won't hold much information value).
2013-06-30 21:10:09 +02:00
98d4317e6f
More error resilience
2013-06-30 21:01:35 +02:00
9227bb5fd0
Removed peakZ again, doesn't work this way
...
Slicers might raise the print head first for a "nose dive" onto the print platform, leading to a high peakZ already dialed in, with no way to get it down again. This way events won't be fired until the print reaches the height of the initial starting point. As a z-change is a z-change if z changes, we'll just fire the event now (if oldZ != newZ). Event consumers will have to think of a way to filter out the noise.
2013-06-30 19:15:16 +02:00
Gina Häußge