Bryan Mayland
905923cc4c
Switch ringbuffer lists for deques. 6% performance boost (4.5% vs baseline)
2013-06-28 14:19:33 -04:00
Gina Häußge
ce9557798b
Fixing #166 showed a deeper rooted issue with line number handling introduced with repetier/sdcard/gcodestreaming
...
Something like three wrongs led to one right. Core issue (not starting with line 0 but line 1 and not using the current line but the current line from the gcode file being sent, regardless of reset by M110) should now be rooted out.
2013-06-24 22:09:40 +02:00
Gina Häußge
79f2cd0e31
Merge branch 'devel' into events
...
Conflicts:
octoprint/util/comm.py
2013-06-22 15:08:53 +02:00
Gina Häußge
f041c6b4f3
First work on custom controls with printer feedback evaluation and presentation in the UI
2013-06-21 20:50:57 +02:00
Gina Häußge
0e56952913
Finalized decoupling of timelapse from printer module, made sure timelapse is properly unregistered from eventbus on change
2013-06-16 22:42:18 +02:00
Gina Häußge
236e26979f
Switched Timelapses to using Eventbus instead of direct connection
2013-06-16 21:50:50 +02:00
Gina Häußge
ed9e93f379
Merge branch 'devel' into events
...
Conflicts:
octoprint/printer.py
octoprint/server.py
octoprint/util/comm.py
2013-06-16 11:50:52 +02:00
Gina Häußge
8be1329a71
Merge branch 'devel' into gcodestreaming
...
Conflicts:
octoprint/printer.py
octoprint/static/js/ui.js
octoprint/templates/index.jinja2
octoprint/util/comm.py
2013-06-09 18:28:40 +02:00
Gina Häußge
9963c523c0
Do not display -1mm when printing from sd
2013-06-09 18:13:12 +02:00
Gina Häußge
107ff01b29
Merge branch 'gcodestreaming' into devel
2013-06-03 22:18:00 +02:00
Gina Häußge
b0891b4d16
Added resource for retrieving a JSON representation of the current printer state (basically most of what's available on socket.io)
...
Endpoint is <baseurl>/ajax/state
2013-05-31 23:24:21 +02:00
Gina Häußge
56cb1c294c
Changed to GCODE streaming instead of loading it all into memory -- no more loading times. Also better file handling.
2013-05-31 22:41:53 +02:00
Gina Häußge
d571aa588a
Merge branch 'sdcard' into events
...
Conflicts:
octoprint/printer.py
octoprint/server.py
octoprint/util/comm.py
2013-05-27 01:33:54 +02:00
Gina Häußge
be99930021
Refactoring of event management
2013-05-27 00:56:57 +02:00
Gina Häußge
c836c79179
Merge branch 'norpchen-master' into events
...
Conflicts:
octoprint/printer.py
2013-05-26 20:24:51 +02:00
Gina Häußge
b645073f1d
Added SD state evaluation and SD commands
2013-05-26 18:53:43 +02:00
Gina Häußge
16f5e54bd7
Merge branch 'devel' into sdcard
...
Conflicts:
octoprint/server.py
octoprint/settings.py
octoprint/static/js/ui.js
octoprint/util/comm.py
2013-05-23 22:53:34 +02:00
Lars Norpchen
535de9f12e
redundant start event trigger removed
2013-05-22 21:41:37 -06:00
Gina Häußge
622e1f2ee7
Do not display the filename that was just streamed to SD, suggests that it is already selected for printing
2013-05-22 23:27:51 +02:00
Gina Häußge
fa584d59c5
Made progress calculation more resilient, do not hit printer with commands like a freight train during warm up
2013-05-22 18:56:02 +02:00
Gina Häußge
6ce7fed96d
Removed cause of NPE
2013-05-22 18:32:19 +02:00
Lars Norpchen
3f98e0c687
Bug Fixes for Event Manager
2013-05-21 19:48:38 -07:00
Gina Häußge
bb954c50d2
Properly switch between file and sd printing
2013-05-21 23:41:18 +02:00
Gina Häußge
45fef79e3d
Use M26 to reset SD position to 0 when cancelling and restarting a print, preprocess gcode before sending to printer
2013-05-21 23:30:29 +02:00
Gina Häußge
38ec0b96b2
Started refactoring to match coding style and simplify things a bit.
2013-05-21 22:59:13 +02:00
Lars Norpchen
525d73a20b
Event Manager
...
Added event manager to trigger system and gcode commands.
2013-05-20 20:04:21 -07:00
Gina Häußge
039a17d923
First try at SD card support
2013-05-20 19:18:03 +02:00
Lars Norpchen
c6363ea046
External commands on events
...
These changes address issues 87 and 22 by adding the ability to trigger
external commands on print start, done, cancel and z-height change.
2013-05-09 14:31:54 -07:00
Lars Norpchen
b609123d8a
Revert "Added external system commands support for events"
...
This reverts commit 3b66f63ff2
.
2013-05-09 14:22:40 -07:00
Lars Norpchen
3b66f63ff2
Added external system commands support for events
...
Print start, print end, print cancel, and Z height change can now
trigger external system commands. These are set in config.yaml and take
_FILE_, _PERCENT_, _LINES_ and _ZHEIGHT_ tokens to be passed to
external commands.
system_commands:
cancelled: echo cancelled _FILE_ at _PROGRESS_
percent done.
print_done: echo done with _FILE_
print_started: echo
starting _FILE_
z_change: echo _LINE_ _PROGRESS_ _ZHEIGHT_
2013-05-09 14:05:48 -07:00
Gina Häußge
9618407aed
Merge branch 'devel' into repetier
...
Conflicts:
octoprint/server.py
2013-04-01 17:25:08 +02:00
Gina Häußge
f70649b0d2
Removed a couple of redundancies for loadAndPrint button, actions are now disabled if they don't make sense
2013-03-30 18:21:49 +01:00
Dale Price
021f413c12
add "Load and Print" button which automatically starts printing when a gcode file is done loading.
...
Solves foosel/OctoPrint#91
2013-03-26 00:09:36 -05:00
Gina Häußge
d6a83d174f
Overhauled resend handling to also work with alwaysSendChecksum feature. Also introduced new feature flag resetLineNumbersWithPrefixedN to make M110 commands send the target line number as part of their N prefix (Repetier), not as a separate N parameter (Marlin & co)
2013-03-16 18:25:39 +01:00
Gina Häußge
98a7c3d8b8
New option to sort gcode files by size, reverted former utc "fix" (doesn't work anymore, works without the fix, I have no idea...), added adjusted modernizr, delete metadata from old gcode file version when adding a new one
2013-03-03 19:37:52 +01:00
Gina Häußge
f03056c1b2
Made settings module more flexible regarding variable path lengths to needed values, made speed for printer movement configurable
2013-02-16 20:28:09 +01:00
Alex Ustyantsev
9e1760fb36
Fixed bug preventing from being able to connect to printer
2013-02-13 18:19:18 +03:00
Gina Häußge
0bcbd20213
Removed stripes from gcode table, fixed a tiny bug
2013-02-03 22:34:52 +01:00
Gina Häußge
6fd0646128
Revamped gcode analysis.
...
Now UI and backend take data from saved metadata (if available). Metadata gets written after file upload and also on startup (for files that have not been added yet). Gcode analysis is interrupted if a printjob is started and resumed when it ends. Frontend is notified when new metadata comes available and UI triggers reload of gcode file list. Also started on implementing proper logging.
2013-02-03 21:14:22 +01:00
Gina Häußge
49cd1ffbd6
Gcode filemanagement now lives in its own module. Upload triggers gcode analysis, result is stored into metadata file. Print jobs triggered and their results are saved as well. Adjusted UI to display gcode analysis result and last print date and (color coded) result if available. Also adjusted gcode file list to color code entries according to last print result.
2013-01-30 20:56:17 +01:00
Gina Häußge
01ffd88a37
Use UTC timestamps only for the temperature graph. Should get rid of weird timestamps in case server and client are in a different timezone.
...
Also fixed the "display minutes since the epoch when not connected to a freshly started server" issue ;)
2013-01-22 17:44:20 +01:00
Gina Häußge
720f3b3eb6
Renamed from Printer WebUI to OctoPrint
...
The location of the config folder has changed. OctoPrint will try to migrate the configuration from its old location (~/.printerwebui, ...) to its new one (~/.octoprint, ...). For this to work the following conditions must be met: 1) the old config folder exists and is a directory 2) the new config folder does not exist at all. The migration functionality will be in the future.
2013-01-18 23:44:11 +01:00