e06d820909Also skip .files and _files with long filenames
Marius Kintel
2013-01-31 12:07:14 -0500
01541ee64cExtended comment explaining M42 usage
Bas Spaans
2013-01-31 18:00:25 +0100
f24f02e212compile fix: quickStop() needs stepper.h
Marius Kintel
2013-01-31 10:43:03 -0500
12c41423adFixed typo in comment
Bas Spaans
2013-01-30 22:54:04 +0100
0995eaa492Chenged LED_PIN for Melzi boards, added comment about broken versions of the Sanguino libraries
Bas Spaans
2013-01-30 22:12:47 +0100
1d06b10962Added a feature to have filament change by gcode or display trigger. [default off for now] syntax: M600 X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
Bernhard
2013-01-27 13:21:34 +0100
408b349a84Fixed#368. Commented out the wrong pin definition, but explained why it is there.
daid303
2013-01-21 15:46:17 +0100
236bb2c110Merge pull request #365 from DanieleSdei/Marlin_v1
daid
2013-01-14 08:29:55 -0800
27843388c6Merge pull request #360 from njprossi/Marlin_v1
daid
2013-01-08 02:58:02 -0800
bfa5bb86e4Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
daid303
2013-01-08 11:54:13 +0100
921273baa0Added optional feature to stop printing when an endstop is hit. Made the Z display on the LCD in 3.2 format instead of 3.1. Added LCD message when and endstop is hit.
daid303
2013-01-08 11:53:18 +0100
7d20ec706eAdded libraries from Arduino 1.0.3 for sanguino build
Yuri Valentini
2013-01-07 17:26:50 +0100
437eb3bafcInitialize PS_ON at startup
Nicolas Rossi
2013-01-07 14:57:51 +0100
f3c1fc70a9Power signal control definitions for ATX and others
Nicolas Rossi
2013-01-07 14:33:30 +0100
dad7691df9makefile for sanguino standalone compilation
Yuri Valentini
2013-01-07 11:08:10 +0100
3a1cd30ce1Merge pull request #358 from yuroller/sanguino_spi
daid
2013-01-04 11:53:10 -0800
69582042d7Definitions for Sanguino SPI
Yuri Valentini
2013-01-04 18:32:08 +0100
5f82f03ff3Add italian MSG_RESUMING.
Daniele Sdei
2012-12-28 11:44:35 +0100
5e3873c8dbAdd german MSG_RESUMING.
daid303
2012-12-25 20:53:11 +0100
01aac2a142Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.
daid303
2012-12-21 16:14:47 +0100
b69cb9fbd9Change the end of SD cart print message from minutes/seconds to hours/minutes.
daid303
2012-12-19 12:26:40 +0100
30254e3388Merge pull request #350 from jcrocholl/Marlin_v1
daid
2012-12-17 02:16:31 -0800
38ee395ac7Replace the 1ms delay for 2 nops to get a 100ns delay. #259
daid303
2012-12-17 11:12:11 +0100
5df5e4c4a2Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
daid303
2012-12-17 11:09:18 +0100
a95dcd74e7Fix some of the duplicated PSTRs, saving 500bytes of flash with LCD on.
daid303
2012-12-17 11:09:09 +0100
ab318beaafMerge pull request #348 from oni303/Marlin_v1
daid
2012-12-17 02:08:28 -0800
8caf5d252dRemove bogus blank line.
Johann Rocholl
2012-12-16 12:50:20 -0800
b39f5d614aFor boards with only one endstop per axis, automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
Johann Rocholl
2012-12-16 12:08:55 -0800
ab09fa4bbffixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp
oni303
2012-12-16 01:36:57 +0100
83ea7dc5b9Merge pull request #342 from setar/Marlin_v1
daid
2012-12-14 05:04:41 -0800
5697451c72fix lcd class
Sergey Taranenko
2012-12-14 15:39:47 +0400
58e806f3faFix the russial translation.
Sergey Taranenko
2012-12-14 15:39:26 +0400
1a8f54cea1The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
daid303
2012-12-12 11:47:03 +0100
6731c094eeFix compiling with just an 16x2 LCD and no buttons.
daid303
2012-12-12 11:32:33 +0100
b99a928a80Fix the M117 (display message on LCD) when used over USB with checksums.
daid303
2012-12-12 09:35:32 +0100
55ba90ac19Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.
daid303
2012-12-12 09:08:37 +0100
5ff5cee8ceFix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)
daid303
2012-12-11 14:53:53 +0100
8b58edc70eMerge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
daid303
2012-12-11 13:38:34 +0100
d0319d45afMerge pull request #335 from jcrocholl/Marlin_v1
daid
2012-12-11 02:59:58 -0800
ca409e5531Fix X/Y/Z_MIN_PIN for Printrboard.
Johann Rocholl
2012-12-11 01:59:48 -0800
1f45cb0a51Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.
Johann Rocholl
2012-12-11 01:54:40 -0800
46ec4b648cAdded some missing Mxxx comments to M commands. Fixed the unsetting of the timer dividers for the fast PWM fan.
daid303
2012-12-11 10:21:44 +0100
724f5aa36bUpdate on makefile for moved Arduino addons.
Daid
2012-12-10 12:06:30 +0100
6d9dfa96c3Move the Arduino related stuff out of the Marlin tree, as they are not directly related to Marlin functionality but addons for the Arduino IDE. Also split up the addons for pre 1.0.0 Arduino and post 1.0.0 Arduino.
daid303
2012-12-10 12:02:29 +0100
3fb07d9b8dAdd MINTEMP/MAXTEMP error to LCD, and fix temperature bug with more then 1 extruder.
daid303
2012-12-10 10:48:46 +0100
82c8724b33Fix compile with PID_DEBUG
daid303
2012-12-09 23:50:12 +0100
9b160972a1Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
daid303
2012-12-09 23:46:42 +0100
e036750bdfUse the disable macros on initialization. Which fixes a bug when there is no pin defined for stepper enabled (motherboard 4)
daid303
2012-12-09 23:46:25 +0100
fcd9de72efMerge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
Daid
2012-12-09 23:31:07 +0100
32d4373e0fAdd printrboard and brainwave to Makefile.
Daid
2012-12-09 23:30:55 +0100
b3ddbcee2aMerge pull request #329 from jcrocholl/Marlin_v1
daid
2012-12-09 14:29:26 -0800
29435dfb4bProper avr for Sanguino in Makefile.
Daid
2012-12-09 23:02:03 +0100
52158dffccBig temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
daid303
2012-12-09 23:00:06 +0100
ca7acbe6d9Allow specification of which arduino hardware subvariant in Makefile.
Daid
2012-12-09 19:19:57 +0100
33247733e0Teensylu and Printrboard use different analog pins for thermistors.
Johann Rocholl
2012-12-09 02:19:13 -0800
621c24a10fAT90USB is only defined after pins.h is included.
Johann Rocholl
2012-12-09 01:40:33 -0800
6cba11f087Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
Johann Rocholl
2012-12-09 01:32:09 -0800
4d351b4846Improved formatting and comments for consistency.
Johann Rocholl
2012-12-08 20:15:53 -0800
a30007caa4If fastio.h is not messed up then Teensylu and Printrboard are actually using the same pins.
Johann Rocholl
2012-12-08 19:46:42 -0800
6aa87a7b67Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.
Johann Rocholl
2012-12-08 15:16:38 -0800
b1c38d4c82Avoid compiler warnings (redefined MOTHERBOARD) in Arduino 1.0 and greater.
Johann Rocholl
2012-12-08 11:34:18 -0800