8ac5b29e02
Changes to M119 response for easier visual comparison
...
Changed to report on individual lines with "TRIGGERED" or "open" instead of "H" or "L" on one line as H&L could be confused with logic levels High and Low which may be wrong if using inverted logic. Added strings to language.h.
Fixed typo "deu" in English language that was fixed in #134 but got added back in via 9f7f7354f5
2012-09-16 14:51:24 -07:00
0a31ccb1d1
Merge pull request #251 from ZetaPhoenix/Marlin_v1_bugfix
...
Limit Switch locations based on MIN/MAX limits and homing direction
2012-09-16 01:47:51 -07:00
c6caa45ae2
Limit Switch locations based on MIN/MAX limits and homing direction
...
fixes #246
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
Relocated code based on feedback.
2012-09-15 15:25:49 -07:00
dc566d654f
fixes #246
...
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
2012-09-14 21:48:49 -07:00
ba898faa7d
Merge pull request #249 from gwelchc/patch-2
...
Slight modification for byte savings
2012-09-14 12:13:36 -07:00
0152ee71a5
Merge pull request #248 from gwelchc/patch-1
...
Binary representation for characters in ultraldc.pde
2012-09-14 12:10:28 -07:00
348d543425
Merge pull request #245 from andrey-vasilyev/patch-1
...
Fix M81 not working reliably on Gen7
2012-09-14 12:04:57 -07:00
6ccbfeb80c
Update Marlin/Marlin.pde
...
Added function 'setTargetedHotend' that turns into a function an operation repeated 3 times through the M-codes processing.
This modification saves a few bytes that can be used to add support for new commands.
2012-09-14 16:38:54 +03:00
c433142abf
Update Marlin/ultralcd.pde
...
The joris' char drawins are expressed in binary so to show their content's in a more visual fashion.
This is not a code modification as much as a readibility modification.
2012-09-14 16:29:43 +03:00
1d389ad3a8
Fix M81 not working reliably on Gen7
...
Some discussion of the issue is here http://forums.reprap.org/read.php?181,118329,page=1
2012-09-13 19:23:48 +04:00
5bfccab650
readme
2012-09-12 21:52:16 -05:00
9698f4ea64
bed pid
...
Conflicts:
Marlin/Configuration.h
2012-09-12 21:18:59 -05:00
769796ed4c
Merge pull request #240 from ZetaPhoenix/Marlin_v1_bugfix
...
Missing #else in temperature.cpp prevented reading bed temp when TEMP_BE...
2012-09-11 02:10:39 -07:00
e8c92e0a95
Missing #else in temperature.cpp prevented reading bed temp when TEMP_BED_PIN <7. Thanks to Leland Wallace for helping me track this down via "Sesame Street" coding (what is not like the other)
2012-09-09 16:06:02 -07:00
abf0693e8e
Added KILL_PIN -1 to gen7 boards
2012-09-04 08:20:27 +02:00
47319cf64e
Fixed typo in SF arc fix code.
2012-09-03 21:28:31 +02:00
e358a2d7af
Added fix for SF Arc Point fillet procedure
2012-09-02 01:12:49 +02:00
044a64a1fb
Merge pull request #225 from Justblair/Marlin_v1
...
Added PDF file containing Menu Tree for documentation purposes.
2012-09-01 04:41:49 -07:00
cd91e0e3e1
Merge pull request #228 from Drakelive/patch-1
...
Update Marlin/pins.h
2012-08-30 13:39:37 -07:00
d728e35658
Update Marlin/pins.h
2012-08-30 23:36:49 +03:00
dcd3e8a211
Tidy up
2012-08-29 22:53:41 +01:00
ddd9d0cfd4
Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included.
2012-08-29 21:08:41 +01:00
0e58ef6805
Some dialogs are corrected
2012-08-29 21:15:59 +02:00
0e89022cc3
Correct temptable_55 name.
2012-08-28 19:47:22 +02:00
47d4f55bc0
Fix Gen7 1.4 pinout
...
Gen7 1.4 uses very different pin assignments, might as well make a new
section and remove some of the conditionals from each. It's easier to change
your pin assingment this way if like me you don't wire it exactly to plan.
2012-08-22 23:15:46 +01:00
6cd150842f
Update Marlin/language.h
...
Some dialogs corrected and Default language set to 1
2012-08-22 21:46:22 +03:00
299c18596f
Update Marlin/language.h
...
Some dialogs are corrected
2012-08-22 21:44:57 +03:00
b86336c3f5
Merge pull request #221 from daid/Marlin_v1
...
Long filename support for LCD display
2012-08-22 06:30:35 -07:00
b69e75c89a
Added long filename support.
2012-08-22 14:49:57 +02:00
825adbd67b
Merge pull request #220 from MaikStohn/1d224cc031
...
Implemented support for KILL_PIN / Fixed compilation errors for incomplete/bad translations
2012-08-22 04:33:28 -07:00
1d224cc031
merged with upstream and FIXED AGAIN bad translation commit
...
PLEASE BE MORE CAREFUL WHEN SUBMITTING NEW TRANSLATIONS
When you add new menu items / messages always copy them to ALL
languages (just use english)
2012-08-22 13:05:42 +02:00
06c03fe2f0
new method for message for making KILLED message visible
...
The cli(); at the start of the kill() function also stops the internal
arduino timer which stops updating of millis() which prevents the
display of the "KILLED." message.
The new function updates the display directly without checking any
timers.
2012-08-22 12:44:41 +02:00
87ff61a8a6
Fix for #201
2012-08-22 10:54:55 +02:00
8c94ad0d26
Merge pull request #219 from Justblair/Marlin_v1
...
Added new function to the LCD menu. Preheat settings now adjustable and can be stored
2012-08-21 23:21:11 -07:00
aacbebbebe
Added Menu Options to the Main-> Control->Temperature Submenu that allow the user to set new values for the ABS and PLA preheat function. EEPROM updated so that these settings can also be committed to EEPROM memory.
2012-08-21 23:46:10 +01:00
31873ec707
changed int to long to overcome overflow of number display
...
- related bug reports: Issue #201 , Issue #213
2012-08-21 16:47:39 +02:00
de0448343f
added KILL_PIN support / cleaned up manage_inactivity function definition
2012-08-21 14:48:29 +02:00
69961dbba3
fixed incorrect menu messages from last commit...
...
- removed several multiple definitions of same message
- fixed definition of missing messages in german and spanish
- tweaked german translation (a lot)
- added note about changing and testing this file
2012-08-21 14:44:20 +02:00
f67feea093
Merge pull request #217 from Justblair/Marlin_v1
...
Fixed broken Language file and pre-heat ABS and PLA options
2012-08-20 14:34:32 -07:00
6c050b8440
Fixes error introduced at commit aee475aa55 which caused the sketch not to comile for language option 1. Several defines were removed but still referenced in ultralcd.pde
2012-08-20 21:54:47 +01:00
b9f9f8f7d3
The pre-heat ABS and PLA options in the LCD Menu were broken a while back. The pre-heat worked fine, but the cooling fans were not switching on as intended. This is now fixed.
2012-08-20 21:49:37 +01:00
d38b96fff1
Update Marlin/language.h
2012-08-12 22:45:11 +03:00
9f7f7354f5
Set default language 1
2012-08-12 21:29:42 +02:00
d3b8edb6a2
Merge pull request #212 from elgambitero/Marlin_v1
...
Spanish language included in the language.h file
2012-08-12 12:27:06 -07:00
aee475aa55
Update Marlin/language.h
...
Spanish language included. It features the LCD screen messages and a small part of the Serial messages.
2012-08-12 21:26:17 +03:00
9083966c22
Do not use feedrate multiiply on Z and E only moves.
2012-08-12 18:13:34 +02:00
5406c533db
Disable FAST_PWM by default. On some systems it does not work ok.
2012-08-11 15:51:04 +02:00
f92dc91c3d
Enable M503 also when eeprom is disabled
2012-08-11 15:49:40 +02:00
35a1dd081f
no message
2012-08-11 15:33:35 +02:00
5131ab19ca
Fixed Retract in LCD Menu
2012-08-11 15:29:40 +02:00
ZetaPhoenix