linux/arch/x86/kernel/ftrace.c
Steven Rostedt f47a454db9 tracing, x86: fix constraint for parent variable
The constraint used for retrieving and restoring the parent function
pointer is incorrect. The parent variable is a pointer, and the
address of the pointer is modified by the asm statement and not
the pointer itself. It is incorrect to pass it in as an output
constraint since the asm will never update the pointer.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-11 10:06:13 +01:00

538 lines
13 KiB
C

/*
* Code for replacing ftrace calls with jumps.
*
* Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
*
* Thanks goes to Ingo Molnar, for suggesting the idea.
* Mathieu Desnoyers, for suggesting postponing the modifications.
* Arjan van de Ven, for keeping me straight, and explaining to me
* the dangers of modifying code on the run.
*/
#include <linux/spinlock.h>
#include <linux/hardirq.h>
#include <linux/uaccess.h>
#include <linux/ftrace.h>
#include <linux/percpu.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/list.h>
#include <asm/ftrace.h>
#include <linux/ftrace.h>
#include <asm/nops.h>
#include <asm/nmi.h>
#ifdef CONFIG_DYNAMIC_FTRACE
union ftrace_code_union {
char code[MCOUNT_INSN_SIZE];
struct {
char e8;
int offset;
} __attribute__((packed));
};
static int ftrace_calc_offset(long ip, long addr)
{
return (int)(addr - ip);
}
static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
{
static union ftrace_code_union calc;
calc.e8 = 0xe8;
calc.offset = ftrace_calc_offset(ip + MCOUNT_INSN_SIZE, addr);
/*
* No locking needed, this must be called via kstop_machine
* which in essence is like running on a uniprocessor machine.
*/
return calc.code;
}
/*
* Modifying code must take extra care. On an SMP machine, if
* the code being modified is also being executed on another CPU
* that CPU will have undefined results and possibly take a GPF.
* We use kstop_machine to stop other CPUS from exectuing code.
* But this does not stop NMIs from happening. We still need
* to protect against that. We separate out the modification of
* the code to take care of this.
*
* Two buffers are added: An IP buffer and a "code" buffer.
*
* 1) Put the instruction pointer into the IP buffer
* and the new code into the "code" buffer.
* 2) Set a flag that says we are modifying code
* 3) Wait for any running NMIs to finish.
* 4) Write the code
* 5) clear the flag.
* 6) Wait for any running NMIs to finish.
*
* If an NMI is executed, the first thing it does is to call
* "ftrace_nmi_enter". This will check if the flag is set to write
* and if it is, it will write what is in the IP and "code" buffers.
*
* The trick is, it does not matter if everyone is writing the same
* content to the code location. Also, if a CPU is executing code
* it is OK to write to that code location if the contents being written
* are the same as what exists.
*/
static atomic_t in_nmi = ATOMIC_INIT(0);
static int mod_code_status; /* holds return value of text write */
static int mod_code_write; /* set when NMI should do the write */
static void *mod_code_ip; /* holds the IP to write to */
static void *mod_code_newcode; /* holds the text to write to the IP */
static unsigned nmi_wait_count;
static atomic_t nmi_update_count = ATOMIC_INIT(0);
int ftrace_arch_read_dyn_info(char *buf, int size)
{
int r;
r = snprintf(buf, size, "%u %u",
nmi_wait_count,
atomic_read(&nmi_update_count));
return r;
}
static void ftrace_mod_code(void)
{
/*
* Yes, more than one CPU process can be writing to mod_code_status.
* (and the code itself)
* But if one were to fail, then they all should, and if one were
* to succeed, then they all should.
*/
mod_code_status = probe_kernel_write(mod_code_ip, mod_code_newcode,
MCOUNT_INSN_SIZE);
}
void ftrace_nmi_enter(void)
{
atomic_inc(&in_nmi);
/* Must have in_nmi seen before reading write flag */
smp_mb();
if (mod_code_write) {
ftrace_mod_code();
atomic_inc(&nmi_update_count);
}
}
void ftrace_nmi_exit(void)
{
/* Finish all executions before clearing in_nmi */
smp_wmb();
atomic_dec(&in_nmi);
}
static void wait_for_nmi(void)
{
int waited = 0;
while (atomic_read(&in_nmi)) {
waited = 1;
cpu_relax();
}
if (waited)
nmi_wait_count++;
}
static int
do_ftrace_mod_code(unsigned long ip, void *new_code)
{
mod_code_ip = (void *)ip;
mod_code_newcode = new_code;
/* The buffers need to be visible before we let NMIs write them */
smp_wmb();
mod_code_write = 1;
/* Make sure write bit is visible before we wait on NMIs */
smp_mb();
wait_for_nmi();
/* Make sure all running NMIs have finished before we write the code */
smp_mb();
ftrace_mod_code();
/* Make sure the write happens before clearing the bit */
smp_wmb();
mod_code_write = 0;
/* make sure NMIs see the cleared bit */
smp_mb();
wait_for_nmi();
return mod_code_status;
}
static unsigned char ftrace_nop[MCOUNT_INSN_SIZE];
static unsigned char *ftrace_nop_replace(void)
{
return ftrace_nop;
}
static int
ftrace_modify_code(unsigned long ip, unsigned char *old_code,
unsigned char *new_code)
{
unsigned char replaced[MCOUNT_INSN_SIZE];
/*
* Note: Due to modules and __init, code can
* disappear and change, we need to protect against faulting
* as well as code changing. We do this by using the
* probe_kernel_* functions.
*
* No real locking needed, this code is run through
* kstop_machine, or before SMP starts.
*/
/* read the text we want to modify */
if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
return -EFAULT;
/* Make sure it is what we expect it to be */
if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0)
return -EINVAL;
/* replace the text with the new text */
if (do_ftrace_mod_code(ip, new_code))
return -EPERM;
sync_core();
return 0;
}
int ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
unsigned char *new, *old;
unsigned long ip = rec->ip;
old = ftrace_call_replace(ip, addr);
new = ftrace_nop_replace();
return ftrace_modify_code(rec->ip, old, new);
}
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned char *new, *old;
unsigned long ip = rec->ip;
old = ftrace_nop_replace();
new = ftrace_call_replace(ip, addr);
return ftrace_modify_code(rec->ip, old, new);
}
int ftrace_update_ftrace_func(ftrace_func_t func)
{
unsigned long ip = (unsigned long)(&ftrace_call);
unsigned char old[MCOUNT_INSN_SIZE], *new;
int ret;
memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE);
new = ftrace_call_replace(ip, (unsigned long)func);
ret = ftrace_modify_code(ip, old, new);
return ret;
}
int __init ftrace_dyn_arch_init(void *data)
{
extern const unsigned char ftrace_test_p6nop[];
extern const unsigned char ftrace_test_nop5[];
extern const unsigned char ftrace_test_jmp[];
int faulted = 0;
/*
* There is no good nop for all x86 archs.
* We will default to using the P6_NOP5, but first we
* will test to make sure that the nop will actually
* work on this CPU. If it faults, we will then
* go to a lesser efficient 5 byte nop. If that fails
* we then just use a jmp as our nop. This isn't the most
* efficient nop, but we can not use a multi part nop
* since we would then risk being preempted in the middle
* of that nop, and if we enabled tracing then, it might
* cause a system crash.
*
* TODO: check the cpuid to determine the best nop.
*/
asm volatile (
"ftrace_test_jmp:"
"jmp ftrace_test_p6nop\n"
"nop\n"
"nop\n"
"nop\n" /* 2 byte jmp + 3 bytes */
"ftrace_test_p6nop:"
P6_NOP5
"jmp 1f\n"
"ftrace_test_nop5:"
".byte 0x66,0x66,0x66,0x66,0x90\n"
"1:"
".section .fixup, \"ax\"\n"
"2: movl $1, %0\n"
" jmp ftrace_test_nop5\n"
"3: movl $2, %0\n"
" jmp 1b\n"
".previous\n"
_ASM_EXTABLE(ftrace_test_p6nop, 2b)
_ASM_EXTABLE(ftrace_test_nop5, 3b)
: "=r"(faulted) : "0" (faulted));
switch (faulted) {
case 0:
pr_info("ftrace: converting mcount calls to 0f 1f 44 00 00\n");
memcpy(ftrace_nop, ftrace_test_p6nop, MCOUNT_INSN_SIZE);
break;
case 1:
pr_info("ftrace: converting mcount calls to 66 66 66 66 90\n");
memcpy(ftrace_nop, ftrace_test_nop5, MCOUNT_INSN_SIZE);
break;
case 2:
pr_info("ftrace: converting mcount calls to jmp . + 5\n");
memcpy(ftrace_nop, ftrace_test_jmp, MCOUNT_INSN_SIZE);
break;
}
/* The return code is retured via data */
*(unsigned long *)data = 0;
return 0;
}
#endif
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
extern void ftrace_graph_call(void);
static int ftrace_mod_jmp(unsigned long ip,
int old_offset, int new_offset)
{
unsigned char code[MCOUNT_INSN_SIZE];
if (probe_kernel_read(code, (void *)ip, MCOUNT_INSN_SIZE))
return -EFAULT;
if (code[0] != 0xe9 || old_offset != *(int *)(&code[1]))
return -EINVAL;
*(int *)(&code[1]) = new_offset;
if (do_ftrace_mod_code(ip, &code))
return -EPERM;
return 0;
}
int ftrace_enable_ftrace_graph_caller(void)
{
unsigned long ip = (unsigned long)(&ftrace_graph_call);
int old_offset, new_offset;
old_offset = (unsigned long)(&ftrace_stub) - (ip + MCOUNT_INSN_SIZE);
new_offset = (unsigned long)(&ftrace_graph_caller) - (ip + MCOUNT_INSN_SIZE);
return ftrace_mod_jmp(ip, old_offset, new_offset);
}
int ftrace_disable_ftrace_graph_caller(void)
{
unsigned long ip = (unsigned long)(&ftrace_graph_call);
int old_offset, new_offset;
old_offset = (unsigned long)(&ftrace_graph_caller) - (ip + MCOUNT_INSN_SIZE);
new_offset = (unsigned long)(&ftrace_stub) - (ip + MCOUNT_INSN_SIZE);
return ftrace_mod_jmp(ip, old_offset, new_offset);
}
#else /* CONFIG_DYNAMIC_FTRACE */
/*
* These functions are picked from those used on
* this page for dynamic ftrace. They have been
* simplified to ignore all traces in NMI context.
*/
static atomic_t in_nmi;
void ftrace_nmi_enter(void)
{
atomic_inc(&in_nmi);
}
void ftrace_nmi_exit(void)
{
atomic_dec(&in_nmi);
}
#endif /* !CONFIG_DYNAMIC_FTRACE */
/* Add a function return address to the trace stack on thread info.*/
static int push_return_trace(unsigned long ret, unsigned long long time,
unsigned long func, int *depth)
{
int index;
if (!current->ret_stack)
return -EBUSY;
/* The return trace stack is full */
if (current->curr_ret_stack == FTRACE_RETFUNC_DEPTH - 1) {
atomic_inc(&current->trace_overrun);
return -EBUSY;
}
index = ++current->curr_ret_stack;
barrier();
current->ret_stack[index].ret = ret;
current->ret_stack[index].func = func;
current->ret_stack[index].calltime = time;
*depth = index;
return 0;
}
/* Retrieve a function return address to the trace stack on thread info.*/
static void pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret)
{
int index;
index = current->curr_ret_stack;
if (unlikely(index < 0)) {
ftrace_graph_stop();
WARN_ON(1);
/* Might as well panic, otherwise we have no where to go */
*ret = (unsigned long)panic;
return;
}
*ret = current->ret_stack[index].ret;
trace->func = current->ret_stack[index].func;
trace->calltime = current->ret_stack[index].calltime;
trace->overrun = atomic_read(&current->trace_overrun);
trace->depth = index;
barrier();
current->curr_ret_stack--;
}
/*
* Send the trace to the ring-buffer.
* @return the original return address.
*/
unsigned long ftrace_return_to_handler(void)
{
struct ftrace_graph_ret trace;
unsigned long ret;
pop_return_trace(&trace, &ret);
trace.rettime = cpu_clock(raw_smp_processor_id());
ftrace_graph_return(&trace);
if (unlikely(!ret)) {
ftrace_graph_stop();
WARN_ON(1);
/* Might as well panic. What else to do? */
ret = (unsigned long)panic;
}
return ret;
}
/*
* Hook the return address and push it in the stack of return addrs
* in current thread info.
*/
void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
{
unsigned long old;
unsigned long long calltime;
int faulted;
struct ftrace_graph_ent trace;
unsigned long return_hooker = (unsigned long)
&return_to_handler;
/* Nmi's are currently unsupported */
if (unlikely(atomic_read(&in_nmi)))
return;
if (unlikely(atomic_read(&current->tracing_graph_pause)))
return;
/*
* Protect against fault, even if it shouldn't
* happen. This tool is too much intrusive to
* ignore such a protection.
*/
asm volatile(
"1: " _ASM_MOV " (%[parent]), %[old]\n"
"2: " _ASM_MOV " %[return_hooker], (%[parent])\n"
" movl $0, %[faulted]\n"
"3:\n"
".section .fixup, \"ax\"\n"
"4: movl $1, %[faulted]\n"
" jmp 3b\n"
".previous\n"
_ASM_EXTABLE(1b, 4b)
_ASM_EXTABLE(2b, 4b)
: [old] "=r" (old), [faulted] "=r" (faulted)
: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
: "memory"
);
if (unlikely(faulted)) {
ftrace_graph_stop();
WARN_ON(1);
return;
}
if (unlikely(!__kernel_text_address(old))) {
ftrace_graph_stop();
*parent = old;
WARN_ON(1);
return;
}
calltime = cpu_clock(raw_smp_processor_id());
if (push_return_trace(old, calltime,
self_addr, &trace.depth) == -EBUSY) {
*parent = old;
return;
}
trace.func = self_addr;
/* Only trace if the calling function expects to */
if (!ftrace_graph_entry(&trace)) {
current->curr_ret_stack--;
*parent = old;
}
}
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */