8d72c796c9
The patch corrects the issue introduced with one of my earlier patches: OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set[1] as pointed out by OMAP subsystem maintainer. Applies on top of my prevoius patch: OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1[2] Tested on Amstrad Delta Compile tested with omap_generic_2420_defconfig [1] http://patchwork.kernel.org/patch/57922/ [2] http://patchwork.kernel.org/patch/61952/ Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
865 lines
20 KiB
C
865 lines
20 KiB
C
/*
|
|
* OMAP1 internal LCD controller
|
|
*
|
|
* Copyright (C) 2004 Nokia Corporation
|
|
* Author: Imre Deak <imre.deak@nokia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <mach/lcdc.h>
|
|
#include <plat/dma.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
|
|
#include "omapfb.h"
|
|
|
|
#include "lcdc.h"
|
|
|
|
#define MODULE_NAME "lcdc"
|
|
|
|
#define MAX_PALETTE_SIZE PAGE_SIZE
|
|
|
|
enum lcdc_load_mode {
|
|
OMAP_LCDC_LOAD_PALETTE,
|
|
OMAP_LCDC_LOAD_FRAME,
|
|
OMAP_LCDC_LOAD_PALETTE_AND_FRAME
|
|
};
|
|
|
|
static struct omap_lcd_controller {
|
|
enum omapfb_update_mode update_mode;
|
|
int ext_mode;
|
|
|
|
unsigned long frame_offset;
|
|
int screen_width;
|
|
int xres;
|
|
int yres;
|
|
|
|
enum omapfb_color_format color_mode;
|
|
int bpp;
|
|
void *palette_virt;
|
|
dma_addr_t palette_phys;
|
|
int palette_code;
|
|
int palette_size;
|
|
|
|
unsigned int irq_mask;
|
|
struct completion last_frame_complete;
|
|
struct completion palette_load_complete;
|
|
struct clk *lcd_ck;
|
|
struct omapfb_device *fbdev;
|
|
|
|
void (*dma_callback)(void *data);
|
|
void *dma_callback_data;
|
|
|
|
int fbmem_allocated;
|
|
dma_addr_t vram_phys;
|
|
void *vram_virt;
|
|
unsigned long vram_size;
|
|
} lcdc;
|
|
|
|
static void inline enable_irqs(int mask)
|
|
{
|
|
lcdc.irq_mask |= mask;
|
|
}
|
|
|
|
static void inline disable_irqs(int mask)
|
|
{
|
|
lcdc.irq_mask &= ~mask;
|
|
}
|
|
|
|
static void set_load_mode(enum lcdc_load_mode mode)
|
|
{
|
|
u32 l;
|
|
|
|
l = omap_readl(OMAP_LCDC_CONTROL);
|
|
l &= ~(3 << 20);
|
|
switch (mode) {
|
|
case OMAP_LCDC_LOAD_PALETTE:
|
|
l |= 1 << 20;
|
|
break;
|
|
case OMAP_LCDC_LOAD_FRAME:
|
|
l |= 2 << 20;
|
|
break;
|
|
case OMAP_LCDC_LOAD_PALETTE_AND_FRAME:
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
omap_writel(l, OMAP_LCDC_CONTROL);
|
|
}
|
|
|
|
static void enable_controller(void)
|
|
{
|
|
u32 l;
|
|
|
|
l = omap_readl(OMAP_LCDC_CONTROL);
|
|
l |= OMAP_LCDC_CTRL_LCD_EN;
|
|
l &= ~OMAP_LCDC_IRQ_MASK;
|
|
l |= lcdc.irq_mask | OMAP_LCDC_IRQ_DONE; /* enabled IRQs */
|
|
omap_writel(l, OMAP_LCDC_CONTROL);
|
|
}
|
|
|
|
static void disable_controller_async(void)
|
|
{
|
|
u32 l;
|
|
u32 mask;
|
|
|
|
l = omap_readl(OMAP_LCDC_CONTROL);
|
|
mask = OMAP_LCDC_CTRL_LCD_EN | OMAP_LCDC_IRQ_MASK;
|
|
/*
|
|
* Preserve the DONE mask, since we still want to get the
|
|
* final DONE irq. It will be disabled in the IRQ handler.
|
|
*/
|
|
mask &= ~OMAP_LCDC_IRQ_DONE;
|
|
l &= ~mask;
|
|
omap_writel(l, OMAP_LCDC_CONTROL);
|
|
}
|
|
|
|
static void disable_controller(void)
|
|
{
|
|
init_completion(&lcdc.last_frame_complete);
|
|
disable_controller_async();
|
|
if (!wait_for_completion_timeout(&lcdc.last_frame_complete,
|
|
msecs_to_jiffies(500)))
|
|
dev_err(lcdc.fbdev->dev, "timeout waiting for FRAME DONE\n");
|
|
}
|
|
|
|
static void reset_controller(u32 status)
|
|
{
|
|
static unsigned long reset_count;
|
|
static unsigned long last_jiffies;
|
|
|
|
disable_controller_async();
|
|
reset_count++;
|
|
if (reset_count == 1 || time_after(jiffies, last_jiffies + HZ)) {
|
|
dev_err(lcdc.fbdev->dev,
|
|
"resetting (status %#010x,reset count %lu)\n",
|
|
status, reset_count);
|
|
last_jiffies = jiffies;
|
|
}
|
|
if (reset_count < 100) {
|
|
enable_controller();
|
|
} else {
|
|
reset_count = 0;
|
|
dev_err(lcdc.fbdev->dev,
|
|
"too many reset attempts, giving up.\n");
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Configure the LCD DMA according to the current mode specified by parameters
|
|
* in lcdc.fbdev and fbdev->var.
|
|
*/
|
|
static void setup_lcd_dma(void)
|
|
{
|
|
static const int dma_elem_type[] = {
|
|
0,
|
|
OMAP_DMA_DATA_TYPE_S8,
|
|
OMAP_DMA_DATA_TYPE_S16,
|
|
0,
|
|
OMAP_DMA_DATA_TYPE_S32,
|
|
};
|
|
struct omapfb_plane_struct *plane = lcdc.fbdev->fb_info[0]->par;
|
|
struct fb_var_screeninfo *var = &lcdc.fbdev->fb_info[0]->var;
|
|
unsigned long src;
|
|
int esize, xelem, yelem;
|
|
|
|
src = lcdc.vram_phys + lcdc.frame_offset;
|
|
|
|
switch (var->rotate) {
|
|
case 0:
|
|
if (plane->info.mirror || (src & 3) ||
|
|
lcdc.color_mode == OMAPFB_COLOR_YUV420 ||
|
|
(lcdc.xres & 1))
|
|
esize = 2;
|
|
else
|
|
esize = 4;
|
|
xelem = lcdc.xres * lcdc.bpp / 8 / esize;
|
|
yelem = lcdc.yres;
|
|
break;
|
|
case 90:
|
|
case 180:
|
|
case 270:
|
|
if (cpu_is_omap15xx()) {
|
|
BUG();
|
|
}
|
|
esize = 2;
|
|
xelem = lcdc.yres * lcdc.bpp / 16;
|
|
yelem = lcdc.xres;
|
|
break;
|
|
default:
|
|
BUG();
|
|
return;
|
|
}
|
|
#ifdef VERBOSE
|
|
dev_dbg(lcdc.fbdev->dev,
|
|
"setup_dma: src %#010lx esize %d xelem %d yelem %d\n",
|
|
src, esize, xelem, yelem);
|
|
#endif
|
|
omap_set_lcd_dma_b1(src, xelem, yelem, dma_elem_type[esize]);
|
|
if (!cpu_is_omap15xx()) {
|
|
int bpp = lcdc.bpp;
|
|
|
|
/*
|
|
* YUV support is only for external mode when we have the
|
|
* YUV window embedded in a 16bpp frame buffer.
|
|
*/
|
|
if (lcdc.color_mode == OMAPFB_COLOR_YUV420)
|
|
bpp = 16;
|
|
/* Set virtual xres elem size */
|
|
omap_set_lcd_dma_b1_vxres(
|
|
lcdc.screen_width * bpp / 8 / esize);
|
|
/* Setup transformations */
|
|
omap_set_lcd_dma_b1_rotation(var->rotate);
|
|
omap_set_lcd_dma_b1_mirror(plane->info.mirror);
|
|
}
|
|
omap_setup_lcd_dma();
|
|
}
|
|
|
|
static irqreturn_t lcdc_irq_handler(int irq, void *dev_id)
|
|
{
|
|
u32 status;
|
|
|
|
status = omap_readl(OMAP_LCDC_STATUS);
|
|
|
|
if (status & (OMAP_LCDC_STAT_FUF | OMAP_LCDC_STAT_SYNC_LOST))
|
|
reset_controller(status);
|
|
else {
|
|
if (status & OMAP_LCDC_STAT_DONE) {
|
|
u32 l;
|
|
|
|
/*
|
|
* Disable IRQ_DONE. The status bit will be cleared
|
|
* only when the controller is reenabled and we don't
|
|
* want to get more interrupts.
|
|
*/
|
|
l = omap_readl(OMAP_LCDC_CONTROL);
|
|
l &= ~OMAP_LCDC_IRQ_DONE;
|
|
omap_writel(l, OMAP_LCDC_CONTROL);
|
|
complete(&lcdc.last_frame_complete);
|
|
}
|
|
if (status & OMAP_LCDC_STAT_LOADED_PALETTE) {
|
|
disable_controller_async();
|
|
complete(&lcdc.palette_load_complete);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Clear these interrupt status bits.
|
|
* Sync_lost, FUF bits were cleared by disabling the LCD controller
|
|
* LOADED_PALETTE can be cleared this way only in palette only
|
|
* load mode. In other load modes it's cleared by disabling the
|
|
* controller.
|
|
*/
|
|
status &= ~(OMAP_LCDC_STAT_VSYNC |
|
|
OMAP_LCDC_STAT_LOADED_PALETTE |
|
|
OMAP_LCDC_STAT_ABC |
|
|
OMAP_LCDC_STAT_LINE_INT);
|
|
omap_writel(status, OMAP_LCDC_STATUS);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* Change to a new video mode. We defer this to a later time to avoid any
|
|
* flicker and not to mess up the current LCD DMA context. For this we disable
|
|
* the LCD controller, which will generate a DONE irq after the last frame has
|
|
* been transferred. Then it'll be safe to reconfigure both the LCD controller
|
|
* as well as the LCD DMA.
|
|
*/
|
|
static int omap_lcdc_setup_plane(int plane, int channel_out,
|
|
unsigned long offset, int screen_width,
|
|
int pos_x, int pos_y, int width, int height,
|
|
int color_mode)
|
|
{
|
|
struct fb_var_screeninfo *var = &lcdc.fbdev->fb_info[0]->var;
|
|
struct lcd_panel *panel = lcdc.fbdev->panel;
|
|
int rot_x, rot_y;
|
|
|
|
if (var->rotate == 0) {
|
|
rot_x = panel->x_res;
|
|
rot_y = panel->y_res;
|
|
} else {
|
|
rot_x = panel->y_res;
|
|
rot_y = panel->x_res;
|
|
}
|
|
if (plane != 0 || channel_out != 0 || pos_x != 0 || pos_y != 0 ||
|
|
width > rot_x || height > rot_y) {
|
|
#ifdef VERBOSE
|
|
dev_dbg(lcdc.fbdev->dev,
|
|
"invalid plane params plane %d pos_x %d pos_y %d "
|
|
"w %d h %d\n", plane, pos_x, pos_y, width, height);
|
|
#endif
|
|
return -EINVAL;
|
|
}
|
|
|
|
lcdc.frame_offset = offset;
|
|
lcdc.xres = width;
|
|
lcdc.yres = height;
|
|
lcdc.screen_width = screen_width;
|
|
lcdc.color_mode = color_mode;
|
|
|
|
switch (color_mode) {
|
|
case OMAPFB_COLOR_CLUT_8BPP:
|
|
lcdc.bpp = 8;
|
|
lcdc.palette_code = 0x3000;
|
|
lcdc.palette_size = 512;
|
|
break;
|
|
case OMAPFB_COLOR_RGB565:
|
|
lcdc.bpp = 16;
|
|
lcdc.palette_code = 0x4000;
|
|
lcdc.palette_size = 32;
|
|
break;
|
|
case OMAPFB_COLOR_RGB444:
|
|
lcdc.bpp = 16;
|
|
lcdc.palette_code = 0x4000;
|
|
lcdc.palette_size = 32;
|
|
break;
|
|
case OMAPFB_COLOR_YUV420:
|
|
if (lcdc.ext_mode) {
|
|
lcdc.bpp = 12;
|
|
break;
|
|
}
|
|
/* fallthrough */
|
|
case OMAPFB_COLOR_YUV422:
|
|
if (lcdc.ext_mode) {
|
|
lcdc.bpp = 16;
|
|
break;
|
|
}
|
|
/* fallthrough */
|
|
default:
|
|
/* FIXME: other BPPs.
|
|
* bpp1: code 0, size 256
|
|
* bpp2: code 0x1000 size 256
|
|
* bpp4: code 0x2000 size 256
|
|
* bpp12: code 0x4000 size 32
|
|
*/
|
|
dev_dbg(lcdc.fbdev->dev, "invalid color mode %d\n", color_mode);
|
|
BUG();
|
|
return -1;
|
|
}
|
|
|
|
if (lcdc.ext_mode) {
|
|
setup_lcd_dma();
|
|
return 0;
|
|
}
|
|
|
|
if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
|
|
disable_controller();
|
|
omap_stop_lcd_dma();
|
|
setup_lcd_dma();
|
|
enable_controller();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_lcdc_enable_plane(int plane, int enable)
|
|
{
|
|
dev_dbg(lcdc.fbdev->dev,
|
|
"plane %d enable %d update_mode %d ext_mode %d\n",
|
|
plane, enable, lcdc.update_mode, lcdc.ext_mode);
|
|
if (plane != OMAPFB_PLANE_GFX)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Configure the LCD DMA for a palette load operation and do the palette
|
|
* downloading synchronously. We don't use the frame+palette load mode of
|
|
* the controller, since the palette can always be downloaded seperately.
|
|
*/
|
|
static void load_palette(void)
|
|
{
|
|
u16 *palette;
|
|
|
|
palette = (u16 *)lcdc.palette_virt;
|
|
|
|
*(u16 *)palette &= 0x0fff;
|
|
*(u16 *)palette |= lcdc.palette_code;
|
|
|
|
omap_set_lcd_dma_b1(lcdc.palette_phys,
|
|
lcdc.palette_size / 4 + 1, 1, OMAP_DMA_DATA_TYPE_S32);
|
|
|
|
omap_set_lcd_dma_single_transfer(1);
|
|
omap_setup_lcd_dma();
|
|
|
|
init_completion(&lcdc.palette_load_complete);
|
|
enable_irqs(OMAP_LCDC_IRQ_LOADED_PALETTE);
|
|
set_load_mode(OMAP_LCDC_LOAD_PALETTE);
|
|
enable_controller();
|
|
if (!wait_for_completion_timeout(&lcdc.palette_load_complete,
|
|
msecs_to_jiffies(500)))
|
|
dev_err(lcdc.fbdev->dev, "timeout waiting for FRAME DONE\n");
|
|
/* The controller gets disabled in the irq handler */
|
|
disable_irqs(OMAP_LCDC_IRQ_LOADED_PALETTE);
|
|
omap_stop_lcd_dma();
|
|
|
|
omap_set_lcd_dma_single_transfer(lcdc.ext_mode);
|
|
}
|
|
|
|
/* Used only in internal controller mode */
|
|
static int omap_lcdc_setcolreg(u_int regno, u16 red, u16 green, u16 blue,
|
|
u16 transp, int update_hw_pal)
|
|
{
|
|
u16 *palette;
|
|
|
|
if (lcdc.color_mode != OMAPFB_COLOR_CLUT_8BPP || regno > 255)
|
|
return -EINVAL;
|
|
|
|
palette = (u16 *)lcdc.palette_virt;
|
|
|
|
palette[regno] &= ~0x0fff;
|
|
palette[regno] |= ((red >> 12) << 8) | ((green >> 12) << 4 ) |
|
|
(blue >> 12);
|
|
|
|
if (update_hw_pal) {
|
|
disable_controller();
|
|
omap_stop_lcd_dma();
|
|
load_palette();
|
|
setup_lcd_dma();
|
|
set_load_mode(OMAP_LCDC_LOAD_FRAME);
|
|
enable_controller();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void calc_ck_div(int is_tft, int pck, int *pck_div)
|
|
{
|
|
unsigned long lck;
|
|
|
|
pck = max(1, pck);
|
|
lck = clk_get_rate(lcdc.lcd_ck);
|
|
*pck_div = (lck + pck - 1) / pck;
|
|
if (is_tft)
|
|
*pck_div = max(2, *pck_div);
|
|
else
|
|
*pck_div = max(3, *pck_div);
|
|
if (*pck_div > 255) {
|
|
/* FIXME: try to adjust logic clock divider as well */
|
|
*pck_div = 255;
|
|
dev_warn(lcdc.fbdev->dev, "pixclock %d kHz too low.\n",
|
|
pck / 1000);
|
|
}
|
|
}
|
|
|
|
static void inline setup_regs(void)
|
|
{
|
|
u32 l;
|
|
struct lcd_panel *panel = lcdc.fbdev->panel;
|
|
int is_tft = panel->config & OMAP_LCDC_PANEL_TFT;
|
|
unsigned long lck;
|
|
int pcd;
|
|
|
|
l = omap_readl(OMAP_LCDC_CONTROL);
|
|
l &= ~OMAP_LCDC_CTRL_LCD_TFT;
|
|
l |= is_tft ? OMAP_LCDC_CTRL_LCD_TFT : 0;
|
|
#ifdef CONFIG_MACH_OMAP_PALMTE
|
|
/* FIXME:if (machine_is_omap_palmte()) { */
|
|
/* PalmTE uses alternate TFT setting in 8BPP mode */
|
|
l |= (is_tft && panel->bpp == 8) ? 0x810000 : 0;
|
|
/* } */
|
|
#endif
|
|
omap_writel(l, OMAP_LCDC_CONTROL);
|
|
|
|
l = omap_readl(OMAP_LCDC_TIMING2);
|
|
l &= ~(((1 << 6) - 1) << 20);
|
|
l |= (panel->config & OMAP_LCDC_SIGNAL_MASK) << 20;
|
|
omap_writel(l, OMAP_LCDC_TIMING2);
|
|
|
|
l = panel->x_res - 1;
|
|
l |= (panel->hsw - 1) << 10;
|
|
l |= (panel->hfp - 1) << 16;
|
|
l |= (panel->hbp - 1) << 24;
|
|
omap_writel(l, OMAP_LCDC_TIMING0);
|
|
|
|
l = panel->y_res - 1;
|
|
l |= (panel->vsw - 1) << 10;
|
|
l |= panel->vfp << 16;
|
|
l |= panel->vbp << 24;
|
|
omap_writel(l, OMAP_LCDC_TIMING1);
|
|
|
|
l = omap_readl(OMAP_LCDC_TIMING2);
|
|
l &= ~0xff;
|
|
|
|
lck = clk_get_rate(lcdc.lcd_ck);
|
|
|
|
if (!panel->pcd)
|
|
calc_ck_div(is_tft, panel->pixel_clock * 1000, &pcd);
|
|
else {
|
|
dev_warn(lcdc.fbdev->dev,
|
|
"Pixel clock divider value is obsolete.\n"
|
|
"Try to set pixel_clock to %lu and pcd to 0 "
|
|
"in drivers/video/omap/lcd_%s.c and submit a patch.\n",
|
|
lck / panel->pcd / 1000, panel->name);
|
|
|
|
pcd = panel->pcd;
|
|
}
|
|
l |= pcd & 0xff;
|
|
l |= panel->acb << 8;
|
|
omap_writel(l, OMAP_LCDC_TIMING2);
|
|
|
|
/* update panel info with the exact clock */
|
|
panel->pixel_clock = lck / pcd / 1000;
|
|
}
|
|
|
|
/*
|
|
* Configure the LCD controller, download the color palette and start a looped
|
|
* DMA transfer of the frame image data. Called only in internal
|
|
* controller mode.
|
|
*/
|
|
static int omap_lcdc_set_update_mode(enum omapfb_update_mode mode)
|
|
{
|
|
int r = 0;
|
|
|
|
if (mode != lcdc.update_mode) {
|
|
switch (mode) {
|
|
case OMAPFB_AUTO_UPDATE:
|
|
setup_regs();
|
|
load_palette();
|
|
|
|
/* Setup and start LCD DMA */
|
|
setup_lcd_dma();
|
|
|
|
set_load_mode(OMAP_LCDC_LOAD_FRAME);
|
|
enable_irqs(OMAP_LCDC_IRQ_DONE);
|
|
/* This will start the actual DMA transfer */
|
|
enable_controller();
|
|
lcdc.update_mode = mode;
|
|
break;
|
|
case OMAPFB_UPDATE_DISABLED:
|
|
disable_controller();
|
|
omap_stop_lcd_dma();
|
|
lcdc.update_mode = mode;
|
|
break;
|
|
default:
|
|
r = -EINVAL;
|
|
}
|
|
}
|
|
|
|
return r;
|
|
}
|
|
|
|
static enum omapfb_update_mode omap_lcdc_get_update_mode(void)
|
|
{
|
|
return lcdc.update_mode;
|
|
}
|
|
|
|
/* PM code called only in internal controller mode */
|
|
static void omap_lcdc_suspend(void)
|
|
{
|
|
if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
|
|
disable_controller();
|
|
omap_stop_lcd_dma();
|
|
}
|
|
}
|
|
|
|
static void omap_lcdc_resume(void)
|
|
{
|
|
if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
|
|
setup_regs();
|
|
load_palette();
|
|
setup_lcd_dma();
|
|
set_load_mode(OMAP_LCDC_LOAD_FRAME);
|
|
enable_irqs(OMAP_LCDC_IRQ_DONE);
|
|
enable_controller();
|
|
}
|
|
}
|
|
|
|
static void omap_lcdc_get_caps(int plane, struct omapfb_caps *caps)
|
|
{
|
|
return;
|
|
}
|
|
|
|
int omap_lcdc_set_dma_callback(void (*callback)(void *data), void *data)
|
|
{
|
|
BUG_ON(callback == NULL);
|
|
|
|
if (lcdc.dma_callback)
|
|
return -EBUSY;
|
|
else {
|
|
lcdc.dma_callback = callback;
|
|
lcdc.dma_callback_data = data;
|
|
}
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(omap_lcdc_set_dma_callback);
|
|
|
|
void omap_lcdc_free_dma_callback(void)
|
|
{
|
|
lcdc.dma_callback = NULL;
|
|
}
|
|
EXPORT_SYMBOL(omap_lcdc_free_dma_callback);
|
|
|
|
static void lcdc_dma_handler(u16 status, void *data)
|
|
{
|
|
if (lcdc.dma_callback)
|
|
lcdc.dma_callback(lcdc.dma_callback_data);
|
|
}
|
|
|
|
static int mmap_kern(void)
|
|
{
|
|
struct vm_struct *kvma;
|
|
struct vm_area_struct vma;
|
|
pgprot_t pgprot;
|
|
unsigned long vaddr;
|
|
|
|
kvma = get_vm_area(lcdc.vram_size, VM_IOREMAP);
|
|
if (kvma == NULL) {
|
|
dev_err(lcdc.fbdev->dev, "can't get kernel vm area\n");
|
|
return -ENOMEM;
|
|
}
|
|
vma.vm_mm = &init_mm;
|
|
|
|
vaddr = (unsigned long)kvma->addr;
|
|
vma.vm_start = vaddr;
|
|
vma.vm_end = vaddr + lcdc.vram_size;
|
|
|
|
pgprot = pgprot_writecombine(pgprot_kernel);
|
|
if (io_remap_pfn_range(&vma, vaddr,
|
|
lcdc.vram_phys >> PAGE_SHIFT,
|
|
lcdc.vram_size, pgprot) < 0) {
|
|
dev_err(lcdc.fbdev->dev, "kernel mmap for FB memory failed\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
lcdc.vram_virt = (void *)vaddr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void unmap_kern(void)
|
|
{
|
|
vunmap(lcdc.vram_virt);
|
|
}
|
|
|
|
static int alloc_palette_ram(void)
|
|
{
|
|
lcdc.palette_virt = dma_alloc_writecombine(lcdc.fbdev->dev,
|
|
MAX_PALETTE_SIZE, &lcdc.palette_phys, GFP_KERNEL);
|
|
if (lcdc.palette_virt == NULL) {
|
|
dev_err(lcdc.fbdev->dev, "failed to alloc palette memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
memset(lcdc.palette_virt, 0, MAX_PALETTE_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void free_palette_ram(void)
|
|
{
|
|
dma_free_writecombine(lcdc.fbdev->dev, MAX_PALETTE_SIZE,
|
|
lcdc.palette_virt, lcdc.palette_phys);
|
|
}
|
|
|
|
static int alloc_fbmem(struct omapfb_mem_region *region)
|
|
{
|
|
int bpp;
|
|
int frame_size;
|
|
struct lcd_panel *panel = lcdc.fbdev->panel;
|
|
|
|
bpp = panel->bpp;
|
|
if (bpp == 12)
|
|
bpp = 16;
|
|
frame_size = PAGE_ALIGN(panel->x_res * bpp / 8 * panel->y_res);
|
|
if (region->size > frame_size)
|
|
frame_size = region->size;
|
|
lcdc.vram_size = frame_size;
|
|
lcdc.vram_virt = dma_alloc_writecombine(lcdc.fbdev->dev,
|
|
lcdc.vram_size, &lcdc.vram_phys, GFP_KERNEL);
|
|
if (lcdc.vram_virt == NULL) {
|
|
dev_err(lcdc.fbdev->dev, "unable to allocate FB DMA memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
region->size = frame_size;
|
|
region->paddr = lcdc.vram_phys;
|
|
region->vaddr = lcdc.vram_virt;
|
|
region->alloc = 1;
|
|
|
|
memset(lcdc.vram_virt, 0, lcdc.vram_size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void free_fbmem(void)
|
|
{
|
|
dma_free_writecombine(lcdc.fbdev->dev, lcdc.vram_size,
|
|
lcdc.vram_virt, lcdc.vram_phys);
|
|
}
|
|
|
|
static int setup_fbmem(struct omapfb_mem_desc *req_md)
|
|
{
|
|
int r;
|
|
|
|
if (!req_md->region_cnt) {
|
|
dev_err(lcdc.fbdev->dev, "no memory regions defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (req_md->region_cnt > 1) {
|
|
dev_err(lcdc.fbdev->dev, "only one plane is supported\n");
|
|
req_md->region_cnt = 1;
|
|
}
|
|
|
|
if (req_md->region[0].paddr == 0) {
|
|
lcdc.fbmem_allocated = 1;
|
|
if ((r = alloc_fbmem(&req_md->region[0])) < 0)
|
|
return r;
|
|
return 0;
|
|
}
|
|
|
|
lcdc.vram_phys = req_md->region[0].paddr;
|
|
lcdc.vram_size = req_md->region[0].size;
|
|
|
|
if ((r = mmap_kern()) < 0)
|
|
return r;
|
|
|
|
dev_dbg(lcdc.fbdev->dev, "vram at %08x size %08lx mapped to 0x%p\n",
|
|
lcdc.vram_phys, lcdc.vram_size, lcdc.vram_virt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cleanup_fbmem(void)
|
|
{
|
|
if (lcdc.fbmem_allocated)
|
|
free_fbmem();
|
|
else
|
|
unmap_kern();
|
|
}
|
|
|
|
static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
|
|
struct omapfb_mem_desc *req_vram)
|
|
{
|
|
int r;
|
|
u32 l;
|
|
int rate;
|
|
struct clk *tc_ck;
|
|
|
|
lcdc.irq_mask = 0;
|
|
|
|
lcdc.fbdev = fbdev;
|
|
lcdc.ext_mode = ext_mode;
|
|
|
|
l = 0;
|
|
omap_writel(l, OMAP_LCDC_CONTROL);
|
|
|
|
/* FIXME:
|
|
* According to errata some platforms have a clock rate limitiation
|
|
*/
|
|
lcdc.lcd_ck = clk_get(fbdev->dev, "lcd_ck");
|
|
if (IS_ERR(lcdc.lcd_ck)) {
|
|
dev_err(fbdev->dev, "unable to access LCD clock\n");
|
|
r = PTR_ERR(lcdc.lcd_ck);
|
|
goto fail0;
|
|
}
|
|
|
|
tc_ck = clk_get(fbdev->dev, "tc_ck");
|
|
if (IS_ERR(tc_ck)) {
|
|
dev_err(fbdev->dev, "unable to access TC clock\n");
|
|
r = PTR_ERR(tc_ck);
|
|
goto fail1;
|
|
}
|
|
|
|
rate = clk_get_rate(tc_ck);
|
|
clk_put(tc_ck);
|
|
|
|
if (machine_is_ams_delta())
|
|
rate /= 4;
|
|
if (machine_is_omap_h3())
|
|
rate /= 3;
|
|
r = clk_set_rate(lcdc.lcd_ck, rate);
|
|
if (r) {
|
|
dev_err(fbdev->dev, "failed to adjust LCD rate\n");
|
|
goto fail1;
|
|
}
|
|
clk_enable(lcdc.lcd_ck);
|
|
|
|
r = request_irq(OMAP_LCDC_IRQ, lcdc_irq_handler, 0, MODULE_NAME, fbdev);
|
|
if (r) {
|
|
dev_err(fbdev->dev, "unable to get IRQ\n");
|
|
goto fail2;
|
|
}
|
|
|
|
r = omap_request_lcd_dma(lcdc_dma_handler, NULL);
|
|
if (r) {
|
|
dev_err(fbdev->dev, "unable to get LCD DMA\n");
|
|
goto fail3;
|
|
}
|
|
|
|
omap_set_lcd_dma_single_transfer(ext_mode);
|
|
omap_set_lcd_dma_ext_controller(ext_mode);
|
|
|
|
if (!ext_mode)
|
|
if ((r = alloc_palette_ram()) < 0)
|
|
goto fail4;
|
|
|
|
if ((r = setup_fbmem(req_vram)) < 0)
|
|
goto fail5;
|
|
|
|
pr_info("omapfb: LCDC initialized\n");
|
|
|
|
return 0;
|
|
fail5:
|
|
if (!ext_mode)
|
|
free_palette_ram();
|
|
fail4:
|
|
omap_free_lcd_dma();
|
|
fail3:
|
|
free_irq(OMAP_LCDC_IRQ, lcdc.fbdev);
|
|
fail2:
|
|
clk_disable(lcdc.lcd_ck);
|
|
fail1:
|
|
clk_put(lcdc.lcd_ck);
|
|
fail0:
|
|
return r;
|
|
}
|
|
|
|
static void omap_lcdc_cleanup(void)
|
|
{
|
|
if (!lcdc.ext_mode)
|
|
free_palette_ram();
|
|
cleanup_fbmem();
|
|
omap_free_lcd_dma();
|
|
free_irq(OMAP_LCDC_IRQ, lcdc.fbdev);
|
|
clk_disable(lcdc.lcd_ck);
|
|
clk_put(lcdc.lcd_ck);
|
|
}
|
|
|
|
const struct lcd_ctrl omap1_int_ctrl = {
|
|
.name = "internal",
|
|
.init = omap_lcdc_init,
|
|
.cleanup = omap_lcdc_cleanup,
|
|
.get_caps = omap_lcdc_get_caps,
|
|
.set_update_mode = omap_lcdc_set_update_mode,
|
|
.get_update_mode = omap_lcdc_get_update_mode,
|
|
.update_window = NULL,
|
|
.suspend = omap_lcdc_suspend,
|
|
.resume = omap_lcdc_resume,
|
|
.setup_plane = omap_lcdc_setup_plane,
|
|
.enable_plane = omap_lcdc_enable_plane,
|
|
.setcolreg = omap_lcdc_setcolreg,
|
|
};
|