e24c745272
Driver for the Designware SPI core, it supports multipul interfaces like PCI/APB etc. User can use "dw_apb_ssi_db.pdf" from Synopsys as HW datasheet. [randy.dunlap@oracle.com: fix build] [akpm@linux-foundation.org: build fix] Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
944 lines
22 KiB
C
944 lines
22 KiB
C
/*
|
|
* dw_spi.c - Designware SPI core controller driver (refer pxa2xx_spi.c)
|
|
*
|
|
* Copyright (c) 2009, Intel Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*/
|
|
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/highmem.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/spi/dw_spi.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
#include <linux/debugfs.h>
|
|
#endif
|
|
|
|
#define START_STATE ((void *)0)
|
|
#define RUNNING_STATE ((void *)1)
|
|
#define DONE_STATE ((void *)2)
|
|
#define ERROR_STATE ((void *)-1)
|
|
|
|
#define QUEUE_RUNNING 0
|
|
#define QUEUE_STOPPED 1
|
|
|
|
#define MRST_SPI_DEASSERT 0
|
|
#define MRST_SPI_ASSERT 1
|
|
|
|
/* Slave spi_dev related */
|
|
struct chip_data {
|
|
u16 cr0;
|
|
u8 cs; /* chip select pin */
|
|
u8 n_bytes; /* current is a 1/2/4 byte op */
|
|
u8 tmode; /* TR/TO/RO/EEPROM */
|
|
u8 type; /* SPI/SSP/MicroWire */
|
|
|
|
u8 poll_mode; /* 1 means use poll mode */
|
|
|
|
u32 dma_width;
|
|
u32 rx_threshold;
|
|
u32 tx_threshold;
|
|
u8 enable_dma;
|
|
u8 bits_per_word;
|
|
u16 clk_div; /* baud rate divider */
|
|
u32 speed_hz; /* baud rate */
|
|
int (*write)(struct dw_spi *dws);
|
|
int (*read)(struct dw_spi *dws);
|
|
void (*cs_control)(u32 command);
|
|
};
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static int spi_show_regs_open(struct inode *inode, struct file *file)
|
|
{
|
|
file->private_data = inode->i_private;
|
|
return 0;
|
|
}
|
|
|
|
#define SPI_REGS_BUFSIZE 1024
|
|
static ssize_t spi_show_regs(struct file *file, char __user *user_buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct dw_spi *dws;
|
|
char *buf;
|
|
u32 len = 0;
|
|
ssize_t ret;
|
|
|
|
dws = file->private_data;
|
|
|
|
buf = kzalloc(SPI_REGS_BUFSIZE, GFP_KERNEL);
|
|
if (!buf)
|
|
return 0;
|
|
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"MRST SPI0 registers:\n");
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"=================================\n");
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"CTRL0: \t\t0x%08x\n", dw_readl(dws, ctrl0));
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"CTRL1: \t\t0x%08x\n", dw_readl(dws, ctrl1));
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"SSIENR: \t0x%08x\n", dw_readl(dws, ssienr));
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"SER: \t\t0x%08x\n", dw_readl(dws, ser));
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"BAUDR: \t\t0x%08x\n", dw_readl(dws, baudr));
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"TXFTLR: \t0x%08x\n", dw_readl(dws, txfltr));
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"RXFTLR: \t0x%08x\n", dw_readl(dws, rxfltr));
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"TXFLR: \t\t0x%08x\n", dw_readl(dws, txflr));
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"RXFLR: \t\t0x%08x\n", dw_readl(dws, rxflr));
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"SR: \t\t0x%08x\n", dw_readl(dws, sr));
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"IMR: \t\t0x%08x\n", dw_readl(dws, imr));
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"ISR: \t\t0x%08x\n", dw_readl(dws, isr));
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"DMACR: \t\t0x%08x\n", dw_readl(dws, dmacr));
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"DMATDLR: \t0x%08x\n", dw_readl(dws, dmatdlr));
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"DMARDLR: \t0x%08x\n", dw_readl(dws, dmardlr));
|
|
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
|
|
"=================================\n");
|
|
|
|
ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
static const struct file_operations mrst_spi_regs_ops = {
|
|
.owner = THIS_MODULE,
|
|
.open = spi_show_regs_open,
|
|
.read = spi_show_regs,
|
|
};
|
|
|
|
static int mrst_spi_debugfs_init(struct dw_spi *dws)
|
|
{
|
|
dws->debugfs = debugfs_create_dir("mrst_spi", NULL);
|
|
if (!dws->debugfs)
|
|
return -ENOMEM;
|
|
|
|
debugfs_create_file("registers", S_IFREG | S_IRUGO,
|
|
dws->debugfs, (void *)dws, &mrst_spi_regs_ops);
|
|
return 0;
|
|
}
|
|
|
|
static void mrst_spi_debugfs_remove(struct dw_spi *dws)
|
|
{
|
|
if (dws->debugfs)
|
|
debugfs_remove_recursive(dws->debugfs);
|
|
}
|
|
|
|
#else
|
|
static inline int mrst_spi_debugfs_init(struct dw_spi *dws)
|
|
{
|
|
}
|
|
|
|
static inline void mrst_spi_debugfs_remove(struct dw_spi *dws)
|
|
{
|
|
}
|
|
#endif /* CONFIG_DEBUG_FS */
|
|
|
|
static void wait_till_not_busy(struct dw_spi *dws)
|
|
{
|
|
unsigned long end = jiffies + usecs_to_jiffies(1000);
|
|
|
|
while (time_before(jiffies, end)) {
|
|
if (!(dw_readw(dws, sr) & SR_BUSY))
|
|
return;
|
|
}
|
|
dev_err(&dws->master->dev,
|
|
"DW SPI: Stutus keeps busy for 1000us after a read/write!\n");
|
|
}
|
|
|
|
static void flush(struct dw_spi *dws)
|
|
{
|
|
while (dw_readw(dws, sr) & SR_RF_NOT_EMPT)
|
|
dw_readw(dws, dr);
|
|
|
|
wait_till_not_busy(dws);
|
|
}
|
|
|
|
static void null_cs_control(u32 command)
|
|
{
|
|
}
|
|
|
|
static int null_writer(struct dw_spi *dws)
|
|
{
|
|
u8 n_bytes = dws->n_bytes;
|
|
|
|
if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL)
|
|
|| (dws->tx == dws->tx_end))
|
|
return 0;
|
|
dw_writew(dws, dr, 0);
|
|
dws->tx += n_bytes;
|
|
|
|
wait_till_not_busy(dws);
|
|
return 1;
|
|
}
|
|
|
|
static int null_reader(struct dw_spi *dws)
|
|
{
|
|
u8 n_bytes = dws->n_bytes;
|
|
|
|
while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT)
|
|
&& (dws->rx < dws->rx_end)) {
|
|
dw_readw(dws, dr);
|
|
dws->rx += n_bytes;
|
|
}
|
|
wait_till_not_busy(dws);
|
|
return dws->rx == dws->rx_end;
|
|
}
|
|
|
|
static int u8_writer(struct dw_spi *dws)
|
|
{
|
|
if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL)
|
|
|| (dws->tx == dws->tx_end))
|
|
return 0;
|
|
|
|
dw_writew(dws, dr, *(u8 *)(dws->tx));
|
|
++dws->tx;
|
|
|
|
wait_till_not_busy(dws);
|
|
return 1;
|
|
}
|
|
|
|
static int u8_reader(struct dw_spi *dws)
|
|
{
|
|
while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT)
|
|
&& (dws->rx < dws->rx_end)) {
|
|
*(u8 *)(dws->rx) = dw_readw(dws, dr);
|
|
++dws->rx;
|
|
}
|
|
|
|
wait_till_not_busy(dws);
|
|
return dws->rx == dws->rx_end;
|
|
}
|
|
|
|
static int u16_writer(struct dw_spi *dws)
|
|
{
|
|
if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL)
|
|
|| (dws->tx == dws->tx_end))
|
|
return 0;
|
|
|
|
dw_writew(dws, dr, *(u16 *)(dws->tx));
|
|
dws->tx += 2;
|
|
|
|
wait_till_not_busy(dws);
|
|
return 1;
|
|
}
|
|
|
|
static int u16_reader(struct dw_spi *dws)
|
|
{
|
|
u16 temp;
|
|
|
|
while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT)
|
|
&& (dws->rx < dws->rx_end)) {
|
|
temp = dw_readw(dws, dr);
|
|
*(u16 *)(dws->rx) = temp;
|
|
dws->rx += 2;
|
|
}
|
|
|
|
wait_till_not_busy(dws);
|
|
return dws->rx == dws->rx_end;
|
|
}
|
|
|
|
static void *next_transfer(struct dw_spi *dws)
|
|
{
|
|
struct spi_message *msg = dws->cur_msg;
|
|
struct spi_transfer *trans = dws->cur_transfer;
|
|
|
|
/* Move to next transfer */
|
|
if (trans->transfer_list.next != &msg->transfers) {
|
|
dws->cur_transfer =
|
|
list_entry(trans->transfer_list.next,
|
|
struct spi_transfer,
|
|
transfer_list);
|
|
return RUNNING_STATE;
|
|
} else
|
|
return DONE_STATE;
|
|
}
|
|
|
|
/*
|
|
* Note: first step is the protocol driver prepares
|
|
* a dma-capable memory, and this func just need translate
|
|
* the virt addr to physical
|
|
*/
|
|
static int map_dma_buffers(struct dw_spi *dws)
|
|
{
|
|
if (!dws->cur_msg->is_dma_mapped || !dws->dma_inited
|
|
|| !dws->cur_chip->enable_dma)
|
|
return 0;
|
|
|
|
if (dws->cur_transfer->tx_dma)
|
|
dws->tx_dma = dws->cur_transfer->tx_dma;
|
|
|
|
if (dws->cur_transfer->rx_dma)
|
|
dws->rx_dma = dws->cur_transfer->rx_dma;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* Caller already set message->status; dma and pio irqs are blocked */
|
|
static void giveback(struct dw_spi *dws)
|
|
{
|
|
struct spi_transfer *last_transfer;
|
|
unsigned long flags;
|
|
struct spi_message *msg;
|
|
|
|
spin_lock_irqsave(&dws->lock, flags);
|
|
msg = dws->cur_msg;
|
|
dws->cur_msg = NULL;
|
|
dws->cur_transfer = NULL;
|
|
dws->prev_chip = dws->cur_chip;
|
|
dws->cur_chip = NULL;
|
|
dws->dma_mapped = 0;
|
|
queue_work(dws->workqueue, &dws->pump_messages);
|
|
spin_unlock_irqrestore(&dws->lock, flags);
|
|
|
|
last_transfer = list_entry(msg->transfers.prev,
|
|
struct spi_transfer,
|
|
transfer_list);
|
|
|
|
if (!last_transfer->cs_change)
|
|
dws->cs_control(MRST_SPI_DEASSERT);
|
|
|
|
msg->state = NULL;
|
|
if (msg->complete)
|
|
msg->complete(msg->context);
|
|
}
|
|
|
|
static void int_error_stop(struct dw_spi *dws, const char *msg)
|
|
{
|
|
/* Stop and reset hw */
|
|
flush(dws);
|
|
spi_enable_chip(dws, 0);
|
|
|
|
dev_err(&dws->master->dev, "%s\n", msg);
|
|
dws->cur_msg->state = ERROR_STATE;
|
|
tasklet_schedule(&dws->pump_transfers);
|
|
}
|
|
|
|
static void transfer_complete(struct dw_spi *dws)
|
|
{
|
|
/* Update total byte transfered return count actual bytes read */
|
|
dws->cur_msg->actual_length += dws->len;
|
|
|
|
/* Move to next transfer */
|
|
dws->cur_msg->state = next_transfer(dws);
|
|
|
|
/* Handle end of message */
|
|
if (dws->cur_msg->state == DONE_STATE) {
|
|
dws->cur_msg->status = 0;
|
|
giveback(dws);
|
|
} else
|
|
tasklet_schedule(&dws->pump_transfers);
|
|
}
|
|
|
|
static irqreturn_t interrupt_transfer(struct dw_spi *dws)
|
|
{
|
|
u16 irq_status, irq_mask = 0x3f;
|
|
|
|
irq_status = dw_readw(dws, isr) & irq_mask;
|
|
/* Error handling */
|
|
if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) {
|
|
dw_readw(dws, txoicr);
|
|
dw_readw(dws, rxoicr);
|
|
dw_readw(dws, rxuicr);
|
|
int_error_stop(dws, "interrupt_transfer: fifo overrun");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* INT comes from tx */
|
|
if (dws->tx && (irq_status & SPI_INT_TXEI)) {
|
|
while (dws->tx < dws->tx_end)
|
|
dws->write(dws);
|
|
|
|
if (dws->tx == dws->tx_end) {
|
|
spi_mask_intr(dws, SPI_INT_TXEI);
|
|
transfer_complete(dws);
|
|
}
|
|
}
|
|
|
|
/* INT comes from rx */
|
|
if (dws->rx && (irq_status & SPI_INT_RXFI)) {
|
|
if (dws->read(dws))
|
|
transfer_complete(dws);
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t dw_spi_irq(int irq, void *dev_id)
|
|
{
|
|
struct dw_spi *dws = dev_id;
|
|
|
|
if (!dws->cur_msg) {
|
|
spi_mask_intr(dws, SPI_INT_TXEI);
|
|
/* Never fail */
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return dws->transfer_handler(dws);
|
|
}
|
|
|
|
/* Must be called inside pump_transfers() */
|
|
static void poll_transfer(struct dw_spi *dws)
|
|
{
|
|
if (dws->tx) {
|
|
while (dws->write(dws))
|
|
dws->read(dws);
|
|
}
|
|
|
|
dws->read(dws);
|
|
transfer_complete(dws);
|
|
}
|
|
|
|
static void dma_transfer(struct dw_spi *dws, int cs_change)
|
|
{
|
|
}
|
|
|
|
static void pump_transfers(unsigned long data)
|
|
{
|
|
struct dw_spi *dws = (struct dw_spi *)data;
|
|
struct spi_message *message = NULL;
|
|
struct spi_transfer *transfer = NULL;
|
|
struct spi_transfer *previous = NULL;
|
|
struct spi_device *spi = NULL;
|
|
struct chip_data *chip = NULL;
|
|
u8 bits = 0;
|
|
u8 imask = 0;
|
|
u8 cs_change = 0;
|
|
u16 clk_div = 0;
|
|
u32 speed = 0;
|
|
u32 cr0 = 0;
|
|
|
|
/* Get current state information */
|
|
message = dws->cur_msg;
|
|
transfer = dws->cur_transfer;
|
|
chip = dws->cur_chip;
|
|
spi = message->spi;
|
|
|
|
if (message->state == ERROR_STATE) {
|
|
message->status = -EIO;
|
|
goto early_exit;
|
|
}
|
|
|
|
/* Handle end of message */
|
|
if (message->state == DONE_STATE) {
|
|
message->status = 0;
|
|
goto early_exit;
|
|
}
|
|
|
|
/* Delay if requested at end of transfer*/
|
|
if (message->state == RUNNING_STATE) {
|
|
previous = list_entry(transfer->transfer_list.prev,
|
|
struct spi_transfer,
|
|
transfer_list);
|
|
if (previous->delay_usecs)
|
|
udelay(previous->delay_usecs);
|
|
}
|
|
|
|
dws->n_bytes = chip->n_bytes;
|
|
dws->dma_width = chip->dma_width;
|
|
dws->cs_control = chip->cs_control;
|
|
|
|
dws->rx_dma = transfer->rx_dma;
|
|
dws->tx_dma = transfer->tx_dma;
|
|
dws->tx = (void *)transfer->tx_buf;
|
|
dws->tx_end = dws->tx + transfer->len;
|
|
dws->rx = transfer->rx_buf;
|
|
dws->rx_end = dws->rx + transfer->len;
|
|
dws->write = dws->tx ? chip->write : null_writer;
|
|
dws->read = dws->rx ? chip->read : null_reader;
|
|
dws->cs_change = transfer->cs_change;
|
|
dws->len = dws->cur_transfer->len;
|
|
if (chip != dws->prev_chip)
|
|
cs_change = 1;
|
|
|
|
cr0 = chip->cr0;
|
|
|
|
/* Handle per transfer options for bpw and speed */
|
|
if (transfer->speed_hz) {
|
|
speed = chip->speed_hz;
|
|
|
|
if (transfer->speed_hz != speed) {
|
|
speed = transfer->speed_hz;
|
|
if (speed > dws->max_freq) {
|
|
printk(KERN_ERR "MRST SPI0: unsupported"
|
|
"freq: %dHz\n", speed);
|
|
message->status = -EIO;
|
|
goto early_exit;
|
|
}
|
|
|
|
/* clk_div doesn't support odd number */
|
|
clk_div = dws->max_freq / speed;
|
|
clk_div = (clk_div >> 1) << 1;
|
|
|
|
chip->speed_hz = speed;
|
|
chip->clk_div = clk_div;
|
|
}
|
|
}
|
|
if (transfer->bits_per_word) {
|
|
bits = transfer->bits_per_word;
|
|
|
|
switch (bits) {
|
|
case 8:
|
|
dws->n_bytes = 1;
|
|
dws->dma_width = 1;
|
|
dws->read = (dws->read != null_reader) ?
|
|
u8_reader : null_reader;
|
|
dws->write = (dws->write != null_writer) ?
|
|
u8_writer : null_writer;
|
|
break;
|
|
case 16:
|
|
dws->n_bytes = 2;
|
|
dws->dma_width = 2;
|
|
dws->read = (dws->read != null_reader) ?
|
|
u16_reader : null_reader;
|
|
dws->write = (dws->write != null_writer) ?
|
|
u16_writer : null_writer;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "MRST SPI0: unsupported bits:"
|
|
"%db\n", bits);
|
|
message->status = -EIO;
|
|
goto early_exit;
|
|
}
|
|
|
|
cr0 = (bits - 1)
|
|
| (chip->type << SPI_FRF_OFFSET)
|
|
| (spi->mode << SPI_MODE_OFFSET)
|
|
| (chip->tmode << SPI_TMOD_OFFSET);
|
|
}
|
|
message->state = RUNNING_STATE;
|
|
|
|
/* Check if current transfer is a DMA transaction */
|
|
dws->dma_mapped = map_dma_buffers(dws);
|
|
|
|
if (!dws->dma_mapped && !chip->poll_mode) {
|
|
if (dws->rx)
|
|
imask |= SPI_INT_RXFI;
|
|
if (dws->tx)
|
|
imask |= SPI_INT_TXEI;
|
|
dws->transfer_handler = interrupt_transfer;
|
|
}
|
|
|
|
/*
|
|
* Reprogram registers only if
|
|
* 1. chip select changes
|
|
* 2. clk_div is changed
|
|
* 3. control value changes
|
|
*/
|
|
if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div) {
|
|
spi_enable_chip(dws, 0);
|
|
|
|
if (dw_readw(dws, ctrl0) != cr0)
|
|
dw_writew(dws, ctrl0, cr0);
|
|
|
|
/* Set the interrupt mask, for poll mode just diable all int */
|
|
spi_mask_intr(dws, 0xff);
|
|
if (!chip->poll_mode)
|
|
spi_umask_intr(dws, imask);
|
|
|
|
spi_set_clk(dws, clk_div ? clk_div : chip->clk_div);
|
|
spi_chip_sel(dws, spi->chip_select);
|
|
spi_enable_chip(dws, 1);
|
|
|
|
if (cs_change)
|
|
dws->prev_chip = chip;
|
|
}
|
|
|
|
if (dws->dma_mapped)
|
|
dma_transfer(dws, cs_change);
|
|
|
|
if (chip->poll_mode)
|
|
poll_transfer(dws);
|
|
|
|
return;
|
|
|
|
early_exit:
|
|
giveback(dws);
|
|
return;
|
|
}
|
|
|
|
static void pump_messages(struct work_struct *work)
|
|
{
|
|
struct dw_spi *dws =
|
|
container_of(work, struct dw_spi, pump_messages);
|
|
unsigned long flags;
|
|
|
|
/* Lock queue and check for queue work */
|
|
spin_lock_irqsave(&dws->lock, flags);
|
|
if (list_empty(&dws->queue) || dws->run == QUEUE_STOPPED) {
|
|
dws->busy = 0;
|
|
spin_unlock_irqrestore(&dws->lock, flags);
|
|
return;
|
|
}
|
|
|
|
/* Make sure we are not already running a message */
|
|
if (dws->cur_msg) {
|
|
spin_unlock_irqrestore(&dws->lock, flags);
|
|
return;
|
|
}
|
|
|
|
/* Extract head of queue */
|
|
dws->cur_msg = list_entry(dws->queue.next, struct spi_message, queue);
|
|
list_del_init(&dws->cur_msg->queue);
|
|
|
|
/* Initial message state*/
|
|
dws->cur_msg->state = START_STATE;
|
|
dws->cur_transfer = list_entry(dws->cur_msg->transfers.next,
|
|
struct spi_transfer,
|
|
transfer_list);
|
|
dws->cur_chip = spi_get_ctldata(dws->cur_msg->spi);
|
|
|
|
/* Mark as busy and launch transfers */
|
|
tasklet_schedule(&dws->pump_transfers);
|
|
|
|
dws->busy = 1;
|
|
spin_unlock_irqrestore(&dws->lock, flags);
|
|
}
|
|
|
|
/* spi_device use this to queue in their spi_msg */
|
|
static int dw_spi_transfer(struct spi_device *spi, struct spi_message *msg)
|
|
{
|
|
struct dw_spi *dws = spi_master_get_devdata(spi->master);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dws->lock, flags);
|
|
|
|
if (dws->run == QUEUE_STOPPED) {
|
|
spin_unlock_irqrestore(&dws->lock, flags);
|
|
return -ESHUTDOWN;
|
|
}
|
|
|
|
msg->actual_length = 0;
|
|
msg->status = -EINPROGRESS;
|
|
msg->state = START_STATE;
|
|
|
|
list_add_tail(&msg->queue, &dws->queue);
|
|
|
|
if (dws->run == QUEUE_RUNNING && !dws->busy) {
|
|
|
|
if (dws->cur_transfer || dws->cur_msg)
|
|
queue_work(dws->workqueue,
|
|
&dws->pump_messages);
|
|
else {
|
|
/* If no other data transaction in air, just go */
|
|
spin_unlock_irqrestore(&dws->lock, flags);
|
|
pump_messages(&dws->pump_messages);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&dws->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/* This may be called twice for each spi dev */
|
|
static int dw_spi_setup(struct spi_device *spi)
|
|
{
|
|
struct dw_spi_chip *chip_info = NULL;
|
|
struct chip_data *chip;
|
|
|
|
if (spi->bits_per_word != 8 && spi->bits_per_word != 16)
|
|
return -EINVAL;
|
|
|
|
/* Only alloc on first setup */
|
|
chip = spi_get_ctldata(spi);
|
|
if (!chip) {
|
|
chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
chip->cs_control = null_cs_control;
|
|
chip->enable_dma = 0;
|
|
}
|
|
|
|
/*
|
|
* Protocol drivers may change the chip settings, so...
|
|
* if chip_info exists, use it
|
|
*/
|
|
chip_info = spi->controller_data;
|
|
|
|
/* chip_info doesn't always exist */
|
|
if (chip_info) {
|
|
if (chip_info->cs_control)
|
|
chip->cs_control = chip_info->cs_control;
|
|
|
|
chip->poll_mode = chip_info->poll_mode;
|
|
chip->type = chip_info->type;
|
|
|
|
chip->rx_threshold = 0;
|
|
chip->tx_threshold = 0;
|
|
|
|
chip->enable_dma = chip_info->enable_dma;
|
|
}
|
|
|
|
if (spi->bits_per_word <= 8) {
|
|
chip->n_bytes = 1;
|
|
chip->dma_width = 1;
|
|
chip->read = u8_reader;
|
|
chip->write = u8_writer;
|
|
} else if (spi->bits_per_word <= 16) {
|
|
chip->n_bytes = 2;
|
|
chip->dma_width = 2;
|
|
chip->read = u16_reader;
|
|
chip->write = u16_writer;
|
|
} else {
|
|
/* Never take >16b case for MRST SPIC */
|
|
dev_err(&spi->dev, "invalid wordsize\n");
|
|
return -EINVAL;
|
|
}
|
|
chip->bits_per_word = spi->bits_per_word;
|
|
|
|
chip->speed_hz = spi->max_speed_hz;
|
|
if (chip->speed_hz)
|
|
chip->clk_div = 25000000 / chip->speed_hz;
|
|
else
|
|
chip->clk_div = 8; /* default value */
|
|
|
|
chip->tmode = 0; /* Tx & Rx */
|
|
/* Default SPI mode is SCPOL = 0, SCPH = 0 */
|
|
chip->cr0 = (chip->bits_per_word - 1)
|
|
| (chip->type << SPI_FRF_OFFSET)
|
|
| (spi->mode << SPI_MODE_OFFSET)
|
|
| (chip->tmode << SPI_TMOD_OFFSET);
|
|
|
|
spi_set_ctldata(spi, chip);
|
|
return 0;
|
|
}
|
|
|
|
static void dw_spi_cleanup(struct spi_device *spi)
|
|
{
|
|
struct chip_data *chip = spi_get_ctldata(spi);
|
|
kfree(chip);
|
|
}
|
|
|
|
static int __init init_queue(struct dw_spi *dws)
|
|
{
|
|
INIT_LIST_HEAD(&dws->queue);
|
|
spin_lock_init(&dws->lock);
|
|
|
|
dws->run = QUEUE_STOPPED;
|
|
dws->busy = 0;
|
|
|
|
tasklet_init(&dws->pump_transfers,
|
|
pump_transfers, (unsigned long)dws);
|
|
|
|
INIT_WORK(&dws->pump_messages, pump_messages);
|
|
dws->workqueue = create_singlethread_workqueue(
|
|
dev_name(dws->master->dev.parent));
|
|
if (dws->workqueue == NULL)
|
|
return -EBUSY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int start_queue(struct dw_spi *dws)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dws->lock, flags);
|
|
|
|
if (dws->run == QUEUE_RUNNING || dws->busy) {
|
|
spin_unlock_irqrestore(&dws->lock, flags);
|
|
return -EBUSY;
|
|
}
|
|
|
|
dws->run = QUEUE_RUNNING;
|
|
dws->cur_msg = NULL;
|
|
dws->cur_transfer = NULL;
|
|
dws->cur_chip = NULL;
|
|
dws->prev_chip = NULL;
|
|
spin_unlock_irqrestore(&dws->lock, flags);
|
|
|
|
queue_work(dws->workqueue, &dws->pump_messages);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stop_queue(struct dw_spi *dws)
|
|
{
|
|
unsigned long flags;
|
|
unsigned limit = 50;
|
|
int status = 0;
|
|
|
|
spin_lock_irqsave(&dws->lock, flags);
|
|
dws->run = QUEUE_STOPPED;
|
|
while (!list_empty(&dws->queue) && dws->busy && limit--) {
|
|
spin_unlock_irqrestore(&dws->lock, flags);
|
|
msleep(10);
|
|
spin_lock_irqsave(&dws->lock, flags);
|
|
}
|
|
|
|
if (!list_empty(&dws->queue) || dws->busy)
|
|
status = -EBUSY;
|
|
spin_unlock_irqrestore(&dws->lock, flags);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int destroy_queue(struct dw_spi *dws)
|
|
{
|
|
int status;
|
|
|
|
status = stop_queue(dws);
|
|
if (status != 0)
|
|
return status;
|
|
destroy_workqueue(dws->workqueue);
|
|
return 0;
|
|
}
|
|
|
|
/* Restart the controller, disable all interrupts, clean rx fifo */
|
|
static void spi_hw_init(struct dw_spi *dws)
|
|
{
|
|
spi_enable_chip(dws, 0);
|
|
spi_mask_intr(dws, 0xff);
|
|
spi_enable_chip(dws, 1);
|
|
flush(dws);
|
|
}
|
|
|
|
int __devinit dw_spi_add_host(struct dw_spi *dws)
|
|
{
|
|
struct spi_master *master;
|
|
int ret;
|
|
|
|
BUG_ON(dws == NULL);
|
|
|
|
master = spi_alloc_master(dws->parent_dev, 0);
|
|
if (!master) {
|
|
ret = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
|
|
dws->master = master;
|
|
dws->type = SSI_MOTO_SPI;
|
|
dws->prev_chip = NULL;
|
|
dws->dma_inited = 0;
|
|
dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60);
|
|
|
|
ret = request_irq(dws->irq, dw_spi_irq, 0,
|
|
"dw_spi", dws);
|
|
if (ret < 0) {
|
|
dev_err(&master->dev, "can not get IRQ\n");
|
|
goto err_free_master;
|
|
}
|
|
|
|
master->mode_bits = SPI_CPOL | SPI_CPHA;
|
|
master->bus_num = dws->bus_num;
|
|
master->num_chipselect = dws->num_cs;
|
|
master->cleanup = dw_spi_cleanup;
|
|
master->setup = dw_spi_setup;
|
|
master->transfer = dw_spi_transfer;
|
|
|
|
dws->dma_inited = 0;
|
|
|
|
/* Basic HW init */
|
|
spi_hw_init(dws);
|
|
|
|
/* Initial and start queue */
|
|
ret = init_queue(dws);
|
|
if (ret) {
|
|
dev_err(&master->dev, "problem initializing queue\n");
|
|
goto err_diable_hw;
|
|
}
|
|
ret = start_queue(dws);
|
|
if (ret) {
|
|
dev_err(&master->dev, "problem starting queue\n");
|
|
goto err_diable_hw;
|
|
}
|
|
|
|
spi_master_set_devdata(master, dws);
|
|
ret = spi_register_master(master);
|
|
if (ret) {
|
|
dev_err(&master->dev, "problem registering spi master\n");
|
|
goto err_queue_alloc;
|
|
}
|
|
|
|
mrst_spi_debugfs_init(dws);
|
|
return 0;
|
|
|
|
err_queue_alloc:
|
|
destroy_queue(dws);
|
|
err_diable_hw:
|
|
spi_enable_chip(dws, 0);
|
|
free_irq(dws->irq, dws);
|
|
err_free_master:
|
|
spi_master_put(master);
|
|
exit:
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(dw_spi_add_host);
|
|
|
|
void __devexit dw_spi_remove_host(struct dw_spi *dws)
|
|
{
|
|
int status = 0;
|
|
|
|
if (!dws)
|
|
return;
|
|
mrst_spi_debugfs_remove(dws);
|
|
|
|
/* Remove the queue */
|
|
status = destroy_queue(dws);
|
|
if (status != 0)
|
|
dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not "
|
|
"complete, message memory not freed\n");
|
|
|
|
spi_enable_chip(dws, 0);
|
|
/* Disable clk */
|
|
spi_set_clk(dws, 0);
|
|
free_irq(dws->irq, dws);
|
|
|
|
/* Disconnect from the SPI framework */
|
|
spi_unregister_master(dws->master);
|
|
}
|
|
|
|
int dw_spi_suspend_host(struct dw_spi *dws)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = stop_queue(dws);
|
|
if (ret)
|
|
return ret;
|
|
spi_enable_chip(dws, 0);
|
|
spi_set_clk(dws, 0);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(dw_spi_suspend_host);
|
|
|
|
int dw_spi_resume_host(struct dw_spi *dws)
|
|
{
|
|
int ret;
|
|
|
|
spi_hw_init(dws);
|
|
ret = start_queue(dws);
|
|
if (ret)
|
|
dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(dw_spi_resume_host);
|
|
|
|
MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>");
|
|
MODULE_DESCRIPTION("Driver for DesignWare SPI controller core");
|
|
MODULE_LICENSE("GPL v2");
|