q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/drivers/net/wireless/rtlwifi/core.c
Johannes Berg 18b559d5db mac80211: split TX aggregation stop action 
When TX aggregation is stopped, there are a few
different cases:
 - connection with the peer was dropped
 - session stop was requested locally
 - session stop was requested by the peer
 - connection was dropped while a session is stopping

The behaviour in these cases should be different, if
the connection is dropped then the driver should drop
all frames, otherwise the frames may continue to be
transmitted, aggregated in the case of a locally
requested session stop or unaggregated in the case of
the peer requesting session stop.

Split these different cases so that the driver can
act accordingly; however, treat local and remote stop
the same way and ask the driver to not send frames as
aggregated packets any more.

In the case of connection drop, the stop callback the
driver is otherwise supposed to call is no longer
required.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03 13:01:42 +01:00

1199 lines
34 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2009-2012 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* wlanfae <wlanfae@realtek.com>
* Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
* Hsinchu 300, Taiwan.
*
* Larry Finger <Larry.Finger@lwfinger.net>
*
*****************************************************************************/
#include "wifi.h"
#include "core.h"
#include "cam.h"
#include "base.h"
#include "pci.h"
#include "ps.h"
#include <linux/export.h>
void rtl_fw_cb(const struct firmware *firmware, void *context)
{
struct ieee80211_hw *hw = context;
struct rtl_priv *rtlpriv = rtl_priv(hw);
int err;
RT_TRACE(rtlpriv, COMP_ERR, DBG_LOUD,
"Firmware callback routine entered!\n");
complete(&rtlpriv->firmware_loading_complete);
if (!firmware) {
pr_err("Firmware %s not available\n", rtlpriv->cfg->fw_name);
rtlpriv->max_fw_size = 0;
return;
}
if (firmware->size > rtlpriv->max_fw_size) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Firmware is too big!\n");
release_firmware(firmware);
return;
}
memcpy(rtlpriv->rtlhal.pfirmware, firmware->data, firmware->size);
rtlpriv->rtlhal.fwsize = firmware->size;
release_firmware(firmware);
err = ieee80211_register_hw(hw);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Can't register mac80211 hw\n");
return;
} else {
rtlpriv->mac80211.mac80211_registered = 1;
}
set_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status);
/*init rfkill */
rtl_init_rfkill(hw);
}
EXPORT_SYMBOL(rtl_fw_cb);
/*mutex for start & stop is must here. */
static int rtl_op_start(struct ieee80211_hw *hw)
{
int err;
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
if (!is_hal_stop(rtlhal))
return 0;
if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
return 0;
mutex_lock(&rtlpriv->locks.conf_mutex);
err = rtlpriv->intf_ops->adapter_start(hw);
if (!err)
rtl_watch_dog_timer_callback((unsigned long)hw);
mutex_unlock(&rtlpriv->locks.conf_mutex);
return err;
}
static void rtl_op_stop(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
if (is_hal_stop(rtlhal))
return;
if (unlikely(ppsc->rfpwr_state == ERFOFF)) {
rtl_ips_nic_on(hw);
mdelay(1);
}
mutex_lock(&rtlpriv->locks.conf_mutex);
mac->link_state = MAC80211_NOLINK;
memset(mac->bssid, 0, 6);
mac->vendor = PEER_UNKNOWN;
/*reset sec info */
rtl_cam_reset_sec_info(hw);
rtl_deinit_deferred_work(hw);
rtlpriv->intf_ops->adapter_stop(hw);
mutex_unlock(&rtlpriv->locks.conf_mutex);
}
static void rtl_op_tx(struct ieee80211_hw *hw,
struct ieee80211_tx_control *control,
struct sk_buff *skb)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
struct rtl_tcb_desc tcb_desc;
memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));
if (unlikely(is_hal_stop(rtlhal) || ppsc->rfpwr_state != ERFON))
goto err_free;
if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
goto err_free;
if (!rtlpriv->intf_ops->waitq_insert(hw, control->sta, skb))
rtlpriv->intf_ops->adapter_tx(hw, control->sta, skb, &tcb_desc);
return;
err_free:
dev_kfree_skb_any(skb);
}
static int rtl_op_add_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
int err = 0;
vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER;
if (mac->vif) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
"vif has been set!! mac->vif = 0x%p\n", mac->vif);
return -EOPNOTSUPP;
}
rtl_ips_nic_on(hw);
mutex_lock(&rtlpriv->locks.conf_mutex);
switch (vif->type) {
case NL80211_IFTYPE_STATION:
if (mac->beacon_enabled == 1) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
"NL80211_IFTYPE_STATION\n");
mac->beacon_enabled = 0;
rtlpriv->cfg->ops->update_interrupt_mask(hw, 0,
rtlpriv->cfg->maps
[RTL_IBSS_INT_MASKS]);
}
break;
case NL80211_IFTYPE_ADHOC:
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
"NL80211_IFTYPE_ADHOC\n");
mac->link_state = MAC80211_LINKED;
rtlpriv->cfg->ops->set_bcn_reg(hw);
if (rtlpriv->rtlhal.current_bandtype == BAND_ON_2_4G)
mac->basic_rates = 0xfff;
else
mac->basic_rates = 0xff0;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE,
(u8 *) (&mac->basic_rates));
break;
case NL80211_IFTYPE_AP:
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
"NL80211_IFTYPE_AP\n");
mac->link_state = MAC80211_LINKED;
rtlpriv->cfg->ops->set_bcn_reg(hw);
if (rtlpriv->rtlhal.current_bandtype == BAND_ON_2_4G)
mac->basic_rates = 0xfff;
else
mac->basic_rates = 0xff0;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE,
(u8 *) (&mac->basic_rates));
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"operation mode %d is not supported!\n", vif->type);
err = -EOPNOTSUPP;
goto out;
}
mac->vif = vif;
mac->opmode = vif->type;
rtlpriv->cfg->ops->set_network_type(hw, vif->type);
memcpy(mac->mac_addr, vif->addr, ETH_ALEN);
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr);
out:
mutex_unlock(&rtlpriv->locks.conf_mutex);
return err;
}
static void rtl_op_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
mutex_lock(&rtlpriv->locks.conf_mutex);
/* Free beacon resources */
if ((mac->opmode == NL80211_IFTYPE_AP) ||
(mac->opmode == NL80211_IFTYPE_ADHOC) ||
(mac->opmode == NL80211_IFTYPE_MESH_POINT)) {
if (mac->beacon_enabled == 1) {
mac->beacon_enabled = 0;
rtlpriv->cfg->ops->update_interrupt_mask(hw, 0,
rtlpriv->cfg->maps
[RTL_IBSS_INT_MASKS]);
}
}
/*
*Note: We assume NL80211_IFTYPE_UNSPECIFIED as
*NO LINK for our hardware.
*/
mac->vif = NULL;
mac->link_state = MAC80211_NOLINK;
memset(mac->bssid, 0, 6);
mac->vendor = PEER_UNKNOWN;
mac->opmode = NL80211_IFTYPE_UNSPECIFIED;
rtlpriv->cfg->ops->set_network_type(hw, mac->opmode);
mutex_unlock(&rtlpriv->locks.conf_mutex);
}
static int rtl_op_config(struct ieee80211_hw *hw, u32 changed)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
struct ieee80211_conf *conf = &hw->conf;
mutex_lock(&rtlpriv->locks.conf_mutex);
if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) { /*BIT(2)*/
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
"IEEE80211_CONF_CHANGE_LISTEN_INTERVAL\n");
}
/*For IPS */
if (changed & IEEE80211_CONF_CHANGE_IDLE) {
if (hw->conf.flags & IEEE80211_CONF_IDLE)
rtl_ips_nic_off(hw);
else
rtl_ips_nic_on(hw);
} else {
/*
*although rfoff may not cause by ips, but we will
*check the reason in set_rf_power_state function
*/
if (unlikely(ppsc->rfpwr_state == ERFOFF))
rtl_ips_nic_on(hw);
}
/*For LPS */
if (changed & IEEE80211_CONF_CHANGE_PS) {
cancel_delayed_work(&rtlpriv->works.ps_work);
cancel_delayed_work(&rtlpriv->works.ps_rfon_wq);
if (conf->flags & IEEE80211_CONF_PS) {
rtlpriv->psc.sw_ps_enabled = true;
/* sleep here is must, or we may recv the beacon and
* cause mac80211 into wrong ps state, this will cause
* power save nullfunc send fail, and further cause
* pkt loss, So sleep must quickly but not immediatly
* because that will cause nullfunc send by mac80211
* fail, and cause pkt loss, we have tested that 5mA
* is worked very well */
if (!rtlpriv->psc.multi_buffered)
queue_delayed_work(rtlpriv->works.rtl_wq,
&rtlpriv->works.ps_work,
MSECS(5));
} else {
rtl_swlps_rf_awake(hw);
rtlpriv->psc.sw_ps_enabled = false;
}
}
if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
"IEEE80211_CONF_CHANGE_RETRY_LIMITS %x\n",
hw->conf.long_frame_max_tx_count);
mac->retry_long = hw->conf.long_frame_max_tx_count;
mac->retry_short = hw->conf.long_frame_max_tx_count;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RETRY_LIMIT,
(u8 *) (&hw->conf.
long_frame_max_tx_count));
}
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
struct ieee80211_channel *channel = hw->conf.channel;
u8 wide_chan = (u8) channel->hw_value;
/*
*because we should back channel to
*current_network.chan in in scanning,
*So if set_chan == current_network.chan
*we should set it.
*because mac80211 tell us wrong bw40
*info for cisco1253 bw20, so we modify
*it here based on UPPER & LOWER
*/
switch (hw->conf.channel_type) {
case NL80211_CHAN_HT20:
case NL80211_CHAN_NO_HT:
/* SC */
mac->cur_40_prime_sc =
PRIME_CHNL_OFFSET_DONT_CARE;
rtlphy->current_chan_bw = HT_CHANNEL_WIDTH_20;
mac->bw_40 = false;
break;
case NL80211_CHAN_HT40MINUS:
/* SC */
mac->cur_40_prime_sc = PRIME_CHNL_OFFSET_UPPER;
rtlphy->current_chan_bw =
HT_CHANNEL_WIDTH_20_40;
mac->bw_40 = true;
/*wide channel */
wide_chan -= 2;
break;
case NL80211_CHAN_HT40PLUS:
/* SC */
mac->cur_40_prime_sc = PRIME_CHNL_OFFSET_LOWER;
rtlphy->current_chan_bw =
HT_CHANNEL_WIDTH_20_40;
mac->bw_40 = true;
/*wide channel */
wide_chan += 2;
break;
default:
mac->bw_40 = false;
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case not processed\n");
break;
}
if (wide_chan <= 0)
wide_chan = 1;
/* In scanning, before we go offchannel we may send a ps=1 null
* to AP, and then we may send a ps = 0 null to AP quickly, but
* first null may have caused AP to put lots of packet to hw tx
* buffer. These packets must be tx'd before we go off channel
* so we must delay more time to let AP flush these packets
* before going offchannel, or dis-association or delete BA will
* happen by AP
*/
if (rtlpriv->mac80211.offchan_delay) {
rtlpriv->mac80211.offchan_delay = false;
mdelay(50);
}
rtlphy->current_channel = wide_chan;
rtlpriv->cfg->ops->switch_channel(hw);
rtlpriv->cfg->ops->set_channel_access(hw);
rtlpriv->cfg->ops->set_bw_mode(hw,
hw->conf.channel_type);
}
mutex_unlock(&rtlpriv->locks.conf_mutex);
return 0;
}
static void rtl_op_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *new_flags, u64 multicast)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
*new_flags &= RTL_SUPPORTED_FILTERS;
if (!changed_flags)
return;
/*TODO: we disable broadcase now, so enable here */
if (changed_flags & FIF_ALLMULTI) {
if (*new_flags & FIF_ALLMULTI) {
mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AM] |
rtlpriv->cfg->maps[MAC_RCR_AB];
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
"Enable receive multicast frame\n");
} else {
mac->rx_conf &= ~(rtlpriv->cfg->maps[MAC_RCR_AM] |
rtlpriv->cfg->maps[MAC_RCR_AB]);
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
"Disable receive multicast frame\n");
}
}
if (changed_flags & FIF_FCSFAIL) {
if (*new_flags & FIF_FCSFAIL) {
mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACRC32];
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
"Enable receive FCS error frame\n");
} else {
mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACRC32];
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
"Disable receive FCS error frame\n");
}
}
/* if ssid not set to hw don't check bssid
* here just used for linked scanning, & linked
* and nolink check bssid is set in set network_type */
if ((changed_flags & FIF_BCN_PRBRESP_PROMISC) &&
(mac->link_state >= MAC80211_LINKED)) {
if (mac->opmode != NL80211_IFTYPE_AP) {
if (*new_flags & FIF_BCN_PRBRESP_PROMISC) {
rtlpriv->cfg->ops->set_chk_bssid(hw, false);
} else {
rtlpriv->cfg->ops->set_chk_bssid(hw, true);
}
}
}
if (changed_flags & FIF_CONTROL) {
if (*new_flags & FIF_CONTROL) {
mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACF];
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
"Enable receive control frame\n");
} else {
mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACF];
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
"Disable receive control frame\n");
}
}
if (changed_flags & FIF_OTHER_BSS) {
if (*new_flags & FIF_OTHER_BSS) {
mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AAP];
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
"Enable receive other BSS's frame\n");
} else {
mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_AAP];
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
"Disable receive other BSS's frame\n");
}
}
}
static int rtl_op_sta_add(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
struct rtl_sta_info *sta_entry;
if (sta) {
sta_entry = (struct rtl_sta_info *) sta->drv_priv;
if (rtlhal->current_bandtype == BAND_ON_2_4G) {
sta_entry->wireless_mode = WIRELESS_MODE_G;
if (sta->supp_rates[0] <= 0xf)
sta_entry->wireless_mode = WIRELESS_MODE_B;
if (sta->ht_cap.ht_supported)
sta_entry->wireless_mode = WIRELESS_MODE_N_24G;
} else if (rtlhal->current_bandtype == BAND_ON_5G) {
sta_entry->wireless_mode = WIRELESS_MODE_A;
if (sta->ht_cap.ht_supported)
sta_entry->wireless_mode = WIRELESS_MODE_N_24G;
}
/* I found some times mac80211 give wrong supp_rates for adhoc*/
if (rtlpriv->mac80211.opmode == NL80211_IFTYPE_ADHOC)
sta_entry->wireless_mode = WIRELESS_MODE_G;
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
"Add sta addr is %pM\n", sta->addr);
rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0);
}
return 0;
}
static int rtl_op_sta_remove(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_sta_info *sta_entry;
if (sta) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
"Remove sta addr is %pM\n", sta->addr);
sta_entry = (struct rtl_sta_info *) sta->drv_priv;
sta_entry->wireless_mode = 0;
sta_entry->ratr_index = 0;
}
return 0;
}
static int _rtl_get_hal_qnum(u16 queue)
{
int qnum;
switch (queue) {
case 0:
qnum = AC3_VO;
break;
case 1:
qnum = AC2_VI;
break;
case 2:
qnum = AC0_BE;
break;
case 3:
qnum = AC1_BK;
break;
default:
qnum = AC0_BE;
break;
}
return qnum;
}
/*
*for mac80211 VO=0, VI=1, BE=2, BK=3
*for rtl819x BE=0, BK=1, VI=2, VO=3
*/
static int rtl_op_conf_tx(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, u16 queue,
const struct ieee80211_tx_queue_params *param)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
int aci;
if (queue >= AC_MAX) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
"queue number %d is incorrect!\n", queue);
return -EINVAL;
}
aci = _rtl_get_hal_qnum(queue);
mac->ac[aci].aifs = param->aifs;
mac->ac[aci].cw_min = cpu_to_le16(param->cw_min);
mac->ac[aci].cw_max = cpu_to_le16(param->cw_max);
mac->ac[aci].tx_op = cpu_to_le16(param->txop);
memcpy(&mac->edca_param[aci], param, sizeof(*param));
rtlpriv->cfg->ops->set_qos(hw, aci);
return 0;
}
static void rtl_op_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf, u32 changed)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
struct ieee80211_sta *sta = NULL;
mutex_lock(&rtlpriv->locks.conf_mutex);
if ((vif->type == NL80211_IFTYPE_ADHOC) ||
(vif->type == NL80211_IFTYPE_AP) ||
(vif->type == NL80211_IFTYPE_MESH_POINT)) {
if ((changed & BSS_CHANGED_BEACON) ||
(changed & BSS_CHANGED_BEACON_ENABLED &&
bss_conf->enable_beacon)) {
if (mac->beacon_enabled == 0) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
"BSS_CHANGED_BEACON_ENABLED\n");
/*start hw beacon interrupt. */
/*rtlpriv->cfg->ops->set_bcn_reg(hw); */
mac->beacon_enabled = 1;
rtlpriv->cfg->ops->update_interrupt_mask(hw,
rtlpriv->cfg->maps
[RTL_IBSS_INT_MASKS],
0);
if (rtlpriv->cfg->ops->linked_set_reg)
rtlpriv->cfg->ops->linked_set_reg(hw);
}
}
if ((changed & BSS_CHANGED_BEACON_ENABLED &&
!bss_conf->enable_beacon)) {
if (mac->beacon_enabled == 1) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
"ADHOC DISABLE BEACON\n");
mac->beacon_enabled = 0;
rtlpriv->cfg->ops->update_interrupt_mask(hw, 0,
rtlpriv->cfg->maps
[RTL_IBSS_INT_MASKS]);
}
}
if (changed & BSS_CHANGED_BEACON_INT) {
RT_TRACE(rtlpriv, COMP_BEACON, DBG_TRACE,
"BSS_CHANGED_BEACON_INT\n");
mac->beacon_interval = bss_conf->beacon_int;
rtlpriv->cfg->ops->set_bcn_intv(hw);
}
}
/*TODO: reference to enum ieee80211_bss_change */
if (changed & BSS_CHANGED_ASSOC) {
if (bss_conf->assoc) {
/* we should reset all sec info & cam
* before set cam after linked, we should not
* reset in disassoc, that will cause tkip->wep
* fail because some flag will be wrong */
/* reset sec info */
rtl_cam_reset_sec_info(hw);
/* reset cam to fix wep fail issue
* when change from wpa to wep */
rtl_cam_reset_all_entry(hw);
mac->link_state = MAC80211_LINKED;
mac->cnt_after_linked = 0;
mac->assoc_id = bss_conf->aid;
memcpy(mac->bssid, bss_conf->bssid, 6);
if (rtlpriv->cfg->ops->linked_set_reg)
rtlpriv->cfg->ops->linked_set_reg(hw);
if (mac->opmode == NL80211_IFTYPE_STATION && sta)
rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0);
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
"BSS_CHANGED_ASSOC\n");
} else {
if (mac->link_state == MAC80211_LINKED)
rtl_lps_leave(hw);
mac->link_state = MAC80211_NOLINK;
memset(mac->bssid, 0, 6);
/* reset sec info */
rtl_cam_reset_sec_info(hw);
rtl_cam_reset_all_entry(hw);
mac->vendor = PEER_UNKNOWN;
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
"BSS_CHANGED_UN_ASSOC\n");
}
}
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
"BSS_CHANGED_ERP_CTS_PROT\n");
mac->use_cts_protect = bss_conf->use_cts_prot;
}
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
"BSS_CHANGED_ERP_PREAMBLE use short preamble:%x\n",
bss_conf->use_short_preamble);
mac->short_preamble = bss_conf->use_short_preamble;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACK_PREAMBLE,
&mac->short_preamble);
}
if (changed & BSS_CHANGED_ERP_SLOT) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
"BSS_CHANGED_ERP_SLOT\n");
if (bss_conf->use_short_slot)
mac->slot_time = RTL_SLOT_TIME_9;
else
mac->slot_time = RTL_SLOT_TIME_20;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
&mac->slot_time);
}
if (changed & BSS_CHANGED_HT) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, "BSS_CHANGED_HT\n");
rcu_read_lock();
sta = get_sta(hw, vif, bss_conf->bssid);
if (sta) {
if (sta->ht_cap.ampdu_density >
mac->current_ampdu_density)
mac->current_ampdu_density =
sta->ht_cap.ampdu_density;
if (sta->ht_cap.ampdu_factor <
mac->current_ampdu_factor)
mac->current_ampdu_factor =
sta->ht_cap.ampdu_factor;
}
rcu_read_unlock();
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SHORTGI_DENSITY,
&mac->max_mss_density);
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AMPDU_FACTOR,
&mac->current_ampdu_factor);
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AMPDU_MIN_SPACE,
&mac->current_ampdu_density);
}
if (changed & BSS_CHANGED_BSSID) {
u32 basic_rates;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BSSID,
(u8 *) bss_conf->bssid);
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, "%pM\n",
bss_conf->bssid);
mac->vendor = PEER_UNKNOWN;
memcpy(mac->bssid, bss_conf->bssid, 6);
rtlpriv->cfg->ops->set_network_type(hw, vif->type);
rcu_read_lock();
sta = get_sta(hw, vif, bss_conf->bssid);
if (!sta) {
rcu_read_unlock();
goto out;
}
if (rtlhal->current_bandtype == BAND_ON_5G) {
mac->mode = WIRELESS_MODE_A;
} else {
if (sta->supp_rates[0] <= 0xf)
mac->mode = WIRELESS_MODE_B;
else
mac->mode = WIRELESS_MODE_G;
}
if (sta->ht_cap.ht_supported) {
if (rtlhal->current_bandtype == BAND_ON_2_4G)
mac->mode = WIRELESS_MODE_N_24G;
else
mac->mode = WIRELESS_MODE_N_5G;
}
/* just station need it, because ibss & ap mode will
* set in sta_add, and will be NULL here */
if (mac->opmode == NL80211_IFTYPE_STATION) {
struct rtl_sta_info *sta_entry;
sta_entry = (struct rtl_sta_info *) sta->drv_priv;
sta_entry->wireless_mode = mac->mode;
}
if (sta->ht_cap.ht_supported) {
mac->ht_enable = true;
/*
* for cisco 1252 bw20 it's wrong
* if (ht_cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
* mac->bw_40 = true;
* }
* */
}
if (changed & BSS_CHANGED_BASIC_RATES) {
/* for 5G must << RATE_6M_INDEX=4,
* because 5G have no cck rate*/
if (rtlhal->current_bandtype == BAND_ON_5G)
basic_rates = sta->supp_rates[1] << 4;
else
basic_rates = sta->supp_rates[0];
mac->basic_rates = basic_rates;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE,
(u8 *) (&basic_rates));
}
rcu_read_unlock();
}
/*
* For FW LPS:
* To tell firmware we have connected
* to an AP. For 92SE/CE power save v2.
*/
if (changed & BSS_CHANGED_ASSOC) {
if (bss_conf->assoc) {
if (ppsc->fwctrl_lps) {
u8 mstatus = RT_MEDIA_CONNECT;
rtlpriv->cfg->ops->set_hw_reg(hw,
HW_VAR_H2C_FW_JOINBSSRPT,
&mstatus);
ppsc->report_linked = true;
}
} else {
if (ppsc->fwctrl_lps) {
u8 mstatus = RT_MEDIA_DISCONNECT;
rtlpriv->cfg->ops->set_hw_reg(hw,
HW_VAR_H2C_FW_JOINBSSRPT,
&mstatus);
ppsc->report_linked = false;
}
}
}
out:
mutex_unlock(&rtlpriv->locks.conf_mutex);
}
static u64 rtl_op_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
u64 tsf;
rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_CORRECT_TSF, (u8 *) (&tsf));
return tsf;
}
static void rtl_op_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
u64 tsf)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
u8 bibss = (mac->opmode == NL80211_IFTYPE_ADHOC) ? 1 : 0;
mac->tsf = tsf;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_CORRECT_TSF, &bibss);
}
static void rtl_op_reset_tsf(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
u8 tmp = 0;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_DUAL_TSF_RST, &tmp);
}
static void rtl_op_sta_notify(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum sta_notify_cmd cmd,
struct ieee80211_sta *sta)
{
switch (cmd) {
case STA_NOTIFY_SLEEP:
break;
case STA_NOTIFY_AWAKE:
break;
default:
break;
}
}
static int rtl_op_ampdu_action(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
struct ieee80211_sta *sta, u16 tid, u16 *ssn,
u8 buf_size)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
switch (action) {
case IEEE80211_AMPDU_TX_START:
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
"IEEE80211_AMPDU_TX_START: TID:%d\n", tid);
return rtl_tx_agg_start(hw, sta, tid, ssn);
break;
case IEEE80211_AMPDU_TX_STOP_CONT:
case IEEE80211_AMPDU_TX_STOP_FLUSH:
case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
"IEEE80211_AMPDU_TX_STOP: TID:%d\n", tid);
return rtl_tx_agg_stop(hw, sta, tid);
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
"IEEE80211_AMPDU_TX_OPERATIONAL:TID:%d\n", tid);
rtl_tx_agg_oper(hw, sta, tid);
break;
case IEEE80211_AMPDU_RX_START:
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
"IEEE80211_AMPDU_RX_START:TID:%d\n", tid);
break;
case IEEE80211_AMPDU_RX_STOP:
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
"IEEE80211_AMPDU_RX_STOP:TID:%d\n", tid);
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"IEEE80211_AMPDU_ERR!!!!:\n");
return -EOPNOTSUPP;
}
return 0;
}
static void rtl_op_sw_scan_start(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
mac->act_scanning = true;
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "\n");
if (mac->link_state == MAC80211_LINKED) {
rtl_lps_leave(hw);
mac->link_state = MAC80211_LINKED_SCANNING;
} else {
rtl_ips_nic_on(hw);
}
/* Dual mac */
rtlpriv->rtlhal.load_imrandiqk_setting_for2g = false;
rtlpriv->cfg->ops->led_control(hw, LED_CTL_SITE_SURVEY);
rtlpriv->cfg->ops->scan_operation_backup(hw, SCAN_OPT_BACKUP);
}
static void rtl_op_sw_scan_complete(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "\n");
mac->act_scanning = false;
/* Dual mac */
rtlpriv->rtlhal.load_imrandiqk_setting_for2g = false;
if (mac->link_state == MAC80211_LINKED_SCANNING) {
mac->link_state = MAC80211_LINKED;
if (mac->opmode == NL80211_IFTYPE_STATION) {
/* fix fwlps issue */
rtlpriv->cfg->ops->set_network_type(hw, mac->opmode);
}
}
rtlpriv->cfg->ops->scan_operation_backup(hw, SCAN_OPT_RESTORE);
}
static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
struct ieee80211_vif *vif, struct ieee80211_sta *sta,
struct ieee80211_key_conf *key)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
u8 key_type = NO_ENCRYPTION;
u8 key_idx;
bool group_key = false;
bool wep_only = false;
int err = 0;
u8 mac_addr[ETH_ALEN];
u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
"not open hw encryption\n");
return -ENOSPC; /*User disabled HW-crypto */
}
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
"%s hardware based encryption for keyidx: %d, mac: %pM\n",
cmd == SET_KEY ? "Using" : "Disabling", key->keyidx,
sta ? sta->addr : bcast_addr);
rtlpriv->sec.being_setkey = true;
rtl_ips_nic_on(hw);
mutex_lock(&rtlpriv->locks.conf_mutex);
/* <1> get encryption alg */
switch (key->cipher) {
case WLAN_CIPHER_SUITE_WEP40:
key_type = WEP40_ENCRYPTION;
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "alg:WEP40\n");
break;
case WLAN_CIPHER_SUITE_WEP104:
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "alg:WEP104\n");
key_type = WEP104_ENCRYPTION;
break;
case WLAN_CIPHER_SUITE_TKIP:
key_type = TKIP_ENCRYPTION;
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "alg:TKIP\n");
break;
case WLAN_CIPHER_SUITE_CCMP:
key_type = AESCCMP_ENCRYPTION;
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "alg:CCMP\n");
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "alg_err:%x!!!!\n",
key->cipher);
goto out_unlock;
}
if (key_type == WEP40_ENCRYPTION ||
key_type == WEP104_ENCRYPTION ||
mac->opmode == NL80211_IFTYPE_ADHOC)
rtlpriv->sec.use_defaultkey = true;
/* <2> get key_idx */
key_idx = (u8) (key->keyidx);
if (key_idx > 3)
goto out_unlock;
/* <3> if pairwise key enable_hw_sec */
group_key = !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE);
/* wep always be group key, but there are two conditions:
* 1) wep only: is just for wep enc, in this condition
* rtlpriv->sec.pairwise_enc_algorithm == NO_ENCRYPTION
* will be true & enable_hw_sec will be set when wep
* ke setting.
* 2) wep(group) + AES(pairwise): some AP like cisco
* may use it, in this condition enable_hw_sec will not
* be set when wep key setting */
/* we must reset sec_info after lingked before set key,
* or some flag will be wrong*/
if (mac->opmode == NL80211_IFTYPE_AP) {
if (!group_key || key_type == WEP40_ENCRYPTION ||
key_type == WEP104_ENCRYPTION) {
if (group_key)
wep_only = true;
rtlpriv->cfg->ops->enable_hw_sec(hw);
}
} else {
if ((!group_key) || (mac->opmode == NL80211_IFTYPE_ADHOC) ||
rtlpriv->sec.pairwise_enc_algorithm == NO_ENCRYPTION) {
if (rtlpriv->sec.pairwise_enc_algorithm ==
NO_ENCRYPTION &&
(key_type == WEP40_ENCRYPTION ||
key_type == WEP104_ENCRYPTION))
wep_only = true;
rtlpriv->sec.pairwise_enc_algorithm = key_type;
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
"set enable_hw_sec, key_type:%x(OPEN:0 WEP40:1 TKIP:2 AES:4 WEP104:5)\n",
key_type);
rtlpriv->cfg->ops->enable_hw_sec(hw);
}
}
/* <4> set key based on cmd */
switch (cmd) {
case SET_KEY:
if (wep_only) {
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
"set WEP(group/pairwise) key\n");
/* Pairwise key with an assigned MAC address. */
rtlpriv->sec.pairwise_enc_algorithm = key_type;
rtlpriv->sec.group_enc_algorithm = key_type;
/*set local buf about wep key. */
memcpy(rtlpriv->sec.key_buf[key_idx],
key->key, key->keylen);
rtlpriv->sec.key_len[key_idx] = key->keylen;
eth_zero_addr(mac_addr);
} else if (group_key) { /* group key */
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
"set group key\n");
/* group key */
rtlpriv->sec.group_enc_algorithm = key_type;
/*set local buf about group key. */
memcpy(rtlpriv->sec.key_buf[key_idx],
key->key, key->keylen);
rtlpriv->sec.key_len[key_idx] = key->keylen;
memcpy(mac_addr, bcast_addr, ETH_ALEN);
} else { /* pairwise key */
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
"set pairwise key\n");
if (!sta) {
RT_ASSERT(false,
"pairwise key without mac_addr\n");
err = -EOPNOTSUPP;
goto out_unlock;
}
/* Pairwise key with an assigned MAC address. */
rtlpriv->sec.pairwise_enc_algorithm = key_type;
/*set local buf about pairwise key. */
memcpy(rtlpriv->sec.key_buf[PAIRWISE_KEYIDX],
key->key, key->keylen);
rtlpriv->sec.key_len[PAIRWISE_KEYIDX] = key->keylen;
rtlpriv->sec.pairwise_key =
rtlpriv->sec.key_buf[PAIRWISE_KEYIDX];
memcpy(mac_addr, sta->addr, ETH_ALEN);
}
rtlpriv->cfg->ops->set_key(hw, key_idx, mac_addr,
group_key, key_type, wep_only,
false);
/* <5> tell mac80211 do something: */
/*must use sw generate IV, or can not work !!!!. */
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
key->hw_key_idx = key_idx;
if (key_type == TKIP_ENCRYPTION)
key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
break;
case DISABLE_KEY:
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
"disable key delete one entry\n");
/*set local buf about wep key. */
if (mac->opmode == NL80211_IFTYPE_AP) {
if (sta)
rtl_cam_del_entry(hw, sta->addr);
}
memset(rtlpriv->sec.key_buf[key_idx], 0, key->keylen);
rtlpriv->sec.key_len[key_idx] = 0;
eth_zero_addr(mac_addr);
/*
*mac80211 will delete entrys one by one,
*so don't use rtl_cam_reset_all_entry
*or clear all entry here.
*/
rtl_cam_delete_one_entry(hw, mac_addr, key_idx);
rtl_cam_reset_sec_info(hw);
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"cmd_err:%x!!!!\n", cmd);
}
out_unlock:
mutex_unlock(&rtlpriv->locks.conf_mutex);
rtlpriv->sec.being_setkey = false;
return err;
}
static void rtl_op_rfkill_poll(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
bool radio_state;
bool blocked;
u8 valid = 0;
if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
return;
mutex_lock(&rtlpriv->locks.conf_mutex);
/*if Radio On return true here */
radio_state = rtlpriv->cfg->ops->radio_onoff_checking(hw, &valid);
if (valid) {
if (unlikely(radio_state != rtlpriv->rfkill.rfkill_state)) {
rtlpriv->rfkill.rfkill_state = radio_state;
RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
"wireless radio switch turned %s\n",
radio_state ? "on" : "off");
blocked = (rtlpriv->rfkill.rfkill_state == 1) ? 0 : 1;
wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
}
}
mutex_unlock(&rtlpriv->locks.conf_mutex);
}
/* this function is called by mac80211 to flush tx buffer
* before switch channle or power save, or tx buffer packet
* maybe send after offchannel or rf sleep, this may cause
* dis-association by AP */
static void rtl_op_flush(struct ieee80211_hw *hw, bool drop)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
if (rtlpriv->intf_ops->flush)
rtlpriv->intf_ops->flush(hw, drop);
}
const struct ieee80211_ops rtl_ops = {
.start = rtl_op_start,
.stop = rtl_op_stop,
.tx = rtl_op_tx,
.add_interface = rtl_op_add_interface,
.remove_interface = rtl_op_remove_interface,
.config = rtl_op_config,
.configure_filter = rtl_op_configure_filter,
.sta_add = rtl_op_sta_add,
.sta_remove = rtl_op_sta_remove,
.set_key = rtl_op_set_key,
.conf_tx = rtl_op_conf_tx,
.bss_info_changed = rtl_op_bss_info_changed,
.get_tsf = rtl_op_get_tsf,
.set_tsf = rtl_op_set_tsf,
.reset_tsf = rtl_op_reset_tsf,
.sta_notify = rtl_op_sta_notify,
.ampdu_action = rtl_op_ampdu_action,
.sw_scan_start = rtl_op_sw_scan_start,
.sw_scan_complete = rtl_op_sw_scan_complete,
.rfkill_poll = rtl_op_rfkill_poll,
.flush = rtl_op_flush,
};
Reference in a new issue View git blame Copy permalink