linux/drivers/net/3c501.h

94 lines
2.7 KiB
C
Raw Blame History

This file contains invisible Unicode characters!

This file contains invisible Unicode characters that may be processed differently from what appears below. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to reveal hidden characters.

/*
* Index to functions.
*/
static int el1_probe1(struct net_device *dev, int ioaddr);
static int el_open(struct net_device *dev);
static void el_timeout(struct net_device *dev);
static int el_start_xmit(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t el_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static void el_receive(struct net_device *dev);
static void el_reset(struct net_device *dev);
static int el1_close(struct net_device *dev);
static struct net_device_stats *el1_get_stats(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
static struct ethtool_ops netdev_ethtool_ops;
#define EL1_IO_EXTENT 16
#ifndef EL_DEBUG
#define EL_DEBUG 0 /* use 0 for production, 1 for devel., >2 for debug */
#endif /* Anything above 5 is wordy death! */
#define debug el_debug
static int el_debug = EL_DEBUG;
/*
* Board-specific info in dev->priv.
*/
struct net_local
{
struct net_device_stats stats;
int tx_pkt_start; /* The length of the current Tx packet. */
int collisions; /* Tx collisions this packet */
int loading; /* Spot buffer load collisions */
int txing; /* True if card is in TX mode */
spinlock_t lock; /* Serializing lock */
};
#define RX_STATUS (ioaddr + 0x06)
#define RX_CMD RX_STATUS
#define TX_STATUS (ioaddr + 0x07)
#define TX_CMD TX_STATUS
#define GP_LOW (ioaddr + 0x08)
#define GP_HIGH (ioaddr + 0x09)
#define RX_BUF_CLR (ioaddr + 0x0A)
#define RX_LOW (ioaddr + 0x0A)
#define RX_HIGH (ioaddr + 0x0B)
#define SAPROM (ioaddr + 0x0C)
#define AX_STATUS (ioaddr + 0x0E)
#define AX_CMD AX_STATUS
#define DATAPORT (ioaddr + 0x0F)
#define TX_RDY 0x08 /* In TX_STATUS */
#define EL1_DATAPTR 0x08
#define EL1_RXPTR 0x0A
#define EL1_SAPROM 0x0C
#define EL1_DATAPORT 0x0f
/*
* Writes to the ax command register.
*/
#define AX_OFF 0x00 /* Irq off, buffer access on */
#define AX_SYS 0x40 /* Load the buffer */
#define AX_XMIT 0x44 /* Transmit a packet */
#define AX_RX 0x48 /* Receive a packet */
#define AX_LOOP 0x0C /* Loopback mode */
#define AX_RESET 0x80
/*
* Normal receive mode written to RX_STATUS. We must intr on short packets
* to avoid bogus rx lockups.
*/
#define RX_NORM 0xA8 /* 0x68 == all addrs, 0xA8 only to me. */
#define RX_PROM 0x68 /* Senior Prom, uhmm promiscuous mode. */
#define RX_MULT 0xE8 /* Accept multicast packets. */
#define TX_NORM 0x0A /* Interrupt on everything that might hang the chip */
/*
* TX_STATUS register.
*/
#define TX_COLLISION 0x02
#define TX_16COLLISIONS 0x04
#define TX_READY 0x08
#define RX_RUNT 0x08
#define RX_MISSED 0x01 /* Missed a packet due to 3c501 braindamage. */
#define RX_GOOD 0x30 /* Good packet 0x20, or simple overflow 0x10. */