linux/arch/arm/mach-pxa/idp.c
Russell King cc155c6f2c [ARM] pxa: allow platforms to control which uarts are registered
For some platforms, it is inappropriate to register all PXA UARTs.
In some cases, the UARTs may not be used, and in others we may want
to avoid registering the UARTs to allow other drivers (eg, FICP) to
make use of the UART.

In addition, a while back there was a request to be able to pass
platform data to the UART driver.

This patch enables all of this by providing functions platforms can
call to register each individual UART.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:55 +08:00

221 lines
4.6 KiB
C

/*
* linux/arch/arm/mach-pxa/idp.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
*
* 2001-09-13: Cliff Brake <cbrake@accelent.com>
* Initial code
*
* 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
* <http://www.vibren.com> <http://bec-systems.com>
* Updated for 2.6 kernel
*
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/pxa25x.h>
#include <mach/idp.h>
#include <mach/pxafb.h>
#include <mach/bitfield.h>
#include <mach/mmc.h>
#include "generic.h"
#include "devices.h"
/* TODO:
* - add pxa2xx_audio_ops_t device structure
* - Ethernet interrupt
*/
static unsigned long idp_pin_config[] __initdata = {
/* LCD */
GPIO58_LCD_LDD_0,
GPIO59_LCD_LDD_1,
GPIO60_LCD_LDD_2,
GPIO61_LCD_LDD_3,
GPIO62_LCD_LDD_4,
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
/* STUART */
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
/* MMC */
GPIO6_MMC_CLK,
GPIO8_MMC_CS0,
/* Ethernet */
GPIO33_nCS_5, /* Ethernet CS */
GPIO4_GPIO, /* Ethernet IRQ */
};
static struct resource smc91x_resources[] = {
[0] = {
.start = (IDP_ETH_PHYS + 0x300),
.end = (IDP_ETH_PHYS + 0xfffff),
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_GPIO(4),
.end = IRQ_GPIO(4),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static void idp_backlight_power(int on)
{
if (on) {
IDP_CPLD_LCD |= (1<<1);
} else {
IDP_CPLD_LCD &= ~(1<<1);
}
}
static void idp_vlcd(int on)
{
if (on) {
IDP_CPLD_LCD |= (1<<2);
} else {
IDP_CPLD_LCD &= ~(1<<2);
}
}
static void idp_lcd_power(int on, struct fb_var_screeninfo *var)
{
if (on) {
IDP_CPLD_LCD |= (1<<0);
} else {
IDP_CPLD_LCD &= ~(1<<0);
}
/* call idp_vlcd for now as core driver does not support
* both power and vlcd hooks. Note, this is not technically
* the correct sequence, but seems to work. Disclaimer:
* this may eventually damage the display.
*/
idp_vlcd(on);
}
static struct pxafb_mode_info sharp_lm8v31_mode = {
.pixclock = 270000,
.xres = 640,
.yres = 480,
.bpp = 16,
.hsync_len = 1,
.left_margin = 3,
.right_margin = 3,
.vsync_len = 1,
.upper_margin = 0,
.lower_margin = 0,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.cmap_greyscale = 0,
};
static struct pxafb_mach_info sharp_lm8v31 = {
.modes = &sharp_lm8v31_mode,
.num_modes = 1,
.cmap_inverse = 0,
.cmap_static = 0,
.lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
LCD_AC_BIAS_FREQ(255),
.pxafb_backlight_power = &idp_backlight_power,
.pxafb_lcd_power = &idp_lcd_power
};
static struct pxamci_platform_data idp_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.gpio_card_detect = -1,
.gpio_card_ro = -1,
.gpio_power = -1,
};
static void __init idp_init(void)
{
printk("idp_init()\n");
pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
platform_device_register(&smc91x_device);
//platform_device_register(&mst_audio_device);
set_pxa_fb_info(&sharp_lm8v31);
pxa_set_mci_info(&idp_mci_platform_data);
}
static struct map_desc idp_io_desc[] __initdata = {
{
.virtual = IDP_COREVOLT_VIRT,
.pfn = __phys_to_pfn(IDP_COREVOLT_PHYS),
.length = IDP_COREVOLT_SIZE,
.type = MT_DEVICE
}, {
.virtual = IDP_CPLD_VIRT,
.pfn = __phys_to_pfn(IDP_CPLD_PHYS),
.length = IDP_CPLD_SIZE,
.type = MT_DEVICE
}
};
static void __init idp_map_io(void)
{
pxa_map_io();
iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
}
MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
/* Maintainer: Vibren Technologies */
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = idp_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = idp_init,
MACHINE_END