2eba082709
Apparently¹, some ATAPI devices want to see the packet command first before enabling DMA otherwise they simply hang indefinitely. Reorder the two steps and start DMA only after having issued the command first. [1] http://marc.info/?l=linux-kernel&m=123835520317235&w=2 Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Reported-by: Michael Roth <mroth@nessie.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
704 lines
18 KiB
C
704 lines
18 KiB
C
/*
|
|
* ATAPI support.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/cdrom.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/scatterlist.h>
|
|
|
|
#include <scsi/scsi.h>
|
|
|
|
#ifdef DEBUG
|
|
#define debug_log(fmt, args...) \
|
|
printk(KERN_INFO "ide: " fmt, ## args)
|
|
#else
|
|
#define debug_log(fmt, args...) do {} while (0)
|
|
#endif
|
|
|
|
#define ATAPI_MIN_CDB_BYTES 12
|
|
|
|
static inline int dev_is_idecd(ide_drive_t *drive)
|
|
{
|
|
return drive->media == ide_cdrom || drive->media == ide_optical;
|
|
}
|
|
|
|
/*
|
|
* Check whether we can support a device,
|
|
* based on the ATAPI IDENTIFY command results.
|
|
*/
|
|
int ide_check_atapi_device(ide_drive_t *drive, const char *s)
|
|
{
|
|
u16 *id = drive->id;
|
|
u8 gcw[2], protocol, device_type, removable, drq_type, packet_size;
|
|
|
|
*((u16 *)&gcw) = id[ATA_ID_CONFIG];
|
|
|
|
protocol = (gcw[1] & 0xC0) >> 6;
|
|
device_type = gcw[1] & 0x1F;
|
|
removable = (gcw[0] & 0x80) >> 7;
|
|
drq_type = (gcw[0] & 0x60) >> 5;
|
|
packet_size = gcw[0] & 0x03;
|
|
|
|
#ifdef CONFIG_PPC
|
|
/* kludge for Apple PowerBook internal zip */
|
|
if (drive->media == ide_floppy && device_type == 5 &&
|
|
!strstr((char *)&id[ATA_ID_PROD], "CD-ROM") &&
|
|
strstr((char *)&id[ATA_ID_PROD], "ZIP"))
|
|
device_type = 0;
|
|
#endif
|
|
|
|
if (protocol != 2)
|
|
printk(KERN_ERR "%s: %s: protocol (0x%02x) is not ATAPI\n",
|
|
s, drive->name, protocol);
|
|
else if ((drive->media == ide_floppy && device_type != 0) ||
|
|
(drive->media == ide_tape && device_type != 1))
|
|
printk(KERN_ERR "%s: %s: invalid device type (0x%02x)\n",
|
|
s, drive->name, device_type);
|
|
else if (removable == 0)
|
|
printk(KERN_ERR "%s: %s: the removable flag is not set\n",
|
|
s, drive->name);
|
|
else if (drive->media == ide_floppy && drq_type == 3)
|
|
printk(KERN_ERR "%s: %s: sorry, DRQ type (0x%02x) not "
|
|
"supported\n", s, drive->name, drq_type);
|
|
else if (packet_size != 0)
|
|
printk(KERN_ERR "%s: %s: packet size (0x%02x) is not 12 "
|
|
"bytes\n", s, drive->name, packet_size);
|
|
else
|
|
return 1;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_check_atapi_device);
|
|
|
|
/* PIO data transfer routine using the scatter gather table. */
|
|
int ide_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
|
|
unsigned int bcount, int write)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
|
|
xfer_func_t *xf = write ? tp_ops->output_data : tp_ops->input_data;
|
|
struct scatterlist *sg = pc->sg;
|
|
char *buf;
|
|
int count, done = 0;
|
|
|
|
while (bcount) {
|
|
count = min(sg->length - pc->b_count, bcount);
|
|
|
|
if (PageHighMem(sg_page(sg))) {
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
buf = kmap_atomic(sg_page(sg), KM_IRQ0) + sg->offset;
|
|
xf(drive, NULL, buf + pc->b_count, count);
|
|
kunmap_atomic(buf - sg->offset, KM_IRQ0);
|
|
local_irq_restore(flags);
|
|
} else {
|
|
buf = sg_virt(sg);
|
|
xf(drive, NULL, buf + pc->b_count, count);
|
|
}
|
|
|
|
bcount -= count;
|
|
pc->b_count += count;
|
|
done += count;
|
|
|
|
if (pc->b_count == sg->length) {
|
|
if (!--pc->sg_cnt)
|
|
break;
|
|
pc->sg = sg = sg_next(sg);
|
|
pc->b_count = 0;
|
|
}
|
|
}
|
|
|
|
if (bcount) {
|
|
printk(KERN_ERR "%s: %d leftover bytes, %s\n", drive->name,
|
|
bcount, write ? "padding with zeros"
|
|
: "discarding data");
|
|
ide_pad_transfer(drive, write, bcount);
|
|
}
|
|
|
|
return done;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_io_buffers);
|
|
|
|
void ide_init_pc(struct ide_atapi_pc *pc)
|
|
{
|
|
memset(pc, 0, sizeof(*pc));
|
|
pc->buf = pc->pc_buf;
|
|
pc->buf_size = IDE_PC_BUFFER_SIZE;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_init_pc);
|
|
|
|
/*
|
|
* Generate a new packet command request in front of the request queue, before
|
|
* the current request, so that it will be processed immediately, on the next
|
|
* pass through the driver.
|
|
*/
|
|
static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk,
|
|
struct ide_atapi_pc *pc, struct request *rq)
|
|
{
|
|
blk_rq_init(NULL, rq);
|
|
rq->cmd_type = REQ_TYPE_SPECIAL;
|
|
rq->cmd_flags |= REQ_PREEMPT;
|
|
rq->buffer = (char *)pc;
|
|
rq->rq_disk = disk;
|
|
|
|
if (pc->req_xfer) {
|
|
rq->data = pc->buf;
|
|
rq->data_len = pc->req_xfer;
|
|
}
|
|
|
|
memcpy(rq->cmd, pc->c, 12);
|
|
if (drive->media == ide_tape)
|
|
rq->cmd[13] = REQ_IDETAPE_PC1;
|
|
|
|
drive->hwif->rq = NULL;
|
|
|
|
elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0);
|
|
}
|
|
|
|
/*
|
|
* Add a special packet command request to the tail of the request queue,
|
|
* and wait for it to be serviced.
|
|
*/
|
|
int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
|
|
struct ide_atapi_pc *pc)
|
|
{
|
|
struct request *rq;
|
|
int error;
|
|
|
|
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
|
|
rq->cmd_type = REQ_TYPE_SPECIAL;
|
|
rq->buffer = (char *)pc;
|
|
|
|
if (pc->req_xfer) {
|
|
rq->data = pc->buf;
|
|
rq->data_len = pc->req_xfer;
|
|
}
|
|
|
|
memcpy(rq->cmd, pc->c, 12);
|
|
if (drive->media == ide_tape)
|
|
rq->cmd[13] = REQ_IDETAPE_PC1;
|
|
error = blk_execute_rq(drive->queue, disk, rq, 0);
|
|
blk_put_request(rq);
|
|
|
|
return error;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_queue_pc_tail);
|
|
|
|
int ide_do_test_unit_ready(ide_drive_t *drive, struct gendisk *disk)
|
|
{
|
|
struct ide_atapi_pc pc;
|
|
|
|
ide_init_pc(&pc);
|
|
pc.c[0] = TEST_UNIT_READY;
|
|
|
|
return ide_queue_pc_tail(drive, disk, &pc);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_do_test_unit_ready);
|
|
|
|
int ide_do_start_stop(ide_drive_t *drive, struct gendisk *disk, int start)
|
|
{
|
|
struct ide_atapi_pc pc;
|
|
|
|
ide_init_pc(&pc);
|
|
pc.c[0] = START_STOP;
|
|
pc.c[4] = start;
|
|
|
|
if (drive->media == ide_tape)
|
|
pc.flags |= PC_FLAG_WAIT_FOR_DSC;
|
|
|
|
return ide_queue_pc_tail(drive, disk, &pc);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_do_start_stop);
|
|
|
|
int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on)
|
|
{
|
|
struct ide_atapi_pc pc;
|
|
|
|
if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0)
|
|
return 0;
|
|
|
|
ide_init_pc(&pc);
|
|
pc.c[0] = ALLOW_MEDIUM_REMOVAL;
|
|
pc.c[4] = on;
|
|
|
|
return ide_queue_pc_tail(drive, disk, &pc);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_set_media_lock);
|
|
|
|
void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc)
|
|
{
|
|
ide_init_pc(pc);
|
|
pc->c[0] = REQUEST_SENSE;
|
|
if (drive->media == ide_floppy) {
|
|
pc->c[4] = 255;
|
|
pc->req_xfer = 18;
|
|
} else {
|
|
pc->c[4] = 20;
|
|
pc->req_xfer = 20;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd);
|
|
|
|
/*
|
|
* Called when an error was detected during the last packet command.
|
|
* We queue a request sense packet command in the head of the request list.
|
|
*/
|
|
void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk)
|
|
{
|
|
struct request *rq = &drive->request_sense_rq;
|
|
struct ide_atapi_pc *pc = &drive->request_sense_pc;
|
|
|
|
(void)ide_read_error(drive);
|
|
ide_create_request_sense_cmd(drive, pc);
|
|
if (drive->media == ide_tape)
|
|
set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
|
|
ide_queue_pc_head(drive, disk, pc, rq);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_retry_pc);
|
|
|
|
int ide_cd_expiry(ide_drive_t *drive)
|
|
{
|
|
struct request *rq = drive->hwif->rq;
|
|
unsigned long wait = 0;
|
|
|
|
debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]);
|
|
|
|
/*
|
|
* Some commands are *slow* and normally take a long time to complete.
|
|
* Usually we can use the ATAPI "disconnect" to bypass this, but not all
|
|
* commands/drives support that. Let ide_timer_expiry keep polling us
|
|
* for these.
|
|
*/
|
|
switch (rq->cmd[0]) {
|
|
case GPCMD_BLANK:
|
|
case GPCMD_FORMAT_UNIT:
|
|
case GPCMD_RESERVE_RZONE_TRACK:
|
|
case GPCMD_CLOSE_TRACK:
|
|
case GPCMD_FLUSH_CACHE:
|
|
wait = ATAPI_WAIT_PC;
|
|
break;
|
|
default:
|
|
if (!(rq->cmd_flags & REQ_QUIET))
|
|
printk(KERN_INFO "cmd 0x%x timed out\n",
|
|
rq->cmd[0]);
|
|
wait = 0;
|
|
break;
|
|
}
|
|
return wait;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_cd_expiry);
|
|
|
|
int ide_cd_get_xferlen(struct request *rq)
|
|
{
|
|
if (blk_fs_request(rq))
|
|
return 32768;
|
|
else if (blk_sense_request(rq) || blk_pc_request(rq) ||
|
|
rq->cmd_type == REQ_TYPE_ATA_PC)
|
|
return rq->data_len;
|
|
else
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_cd_get_xferlen);
|
|
|
|
void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason)
|
|
{
|
|
struct ide_cmd cmd;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.tf_flags = IDE_TFLAG_IN_LBAH | IDE_TFLAG_IN_LBAM |
|
|
IDE_TFLAG_IN_NSECT;
|
|
|
|
drive->hwif->tp_ops->tf_read(drive, &cmd);
|
|
|
|
*bcount = (cmd.tf.lbah << 8) | cmd.tf.lbam;
|
|
*ireason = cmd.tf.nsect & 3;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason);
|
|
|
|
/*
|
|
* This is the usual interrupt handler which will be called during a packet
|
|
* command. We will transfer some of the data (as requested by the drive)
|
|
* and will re-point interrupt handler to us.
|
|
*/
|
|
static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
|
|
{
|
|
struct ide_atapi_pc *pc = drive->pc;
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
struct request *rq = hwif->rq;
|
|
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
|
|
xfer_func_t *xferfunc;
|
|
unsigned int timeout, temp;
|
|
u16 bcount;
|
|
u8 stat, ireason, dsc = 0;
|
|
|
|
debug_log("Enter %s - interrupt handler\n", __func__);
|
|
|
|
timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
|
|
: WAIT_TAPE_CMD;
|
|
|
|
/* Clear the interrupt */
|
|
stat = tp_ops->read_status(hwif);
|
|
|
|
if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
|
|
if (hwif->dma_ops->dma_end(drive) ||
|
|
(drive->media == ide_tape && (stat & ATA_ERR))) {
|
|
if (drive->media == ide_floppy)
|
|
printk(KERN_ERR "%s: DMA %s error\n",
|
|
drive->name, rq_data_dir(pc->rq)
|
|
? "write" : "read");
|
|
pc->flags |= PC_FLAG_DMA_ERROR;
|
|
} else {
|
|
pc->xferred = pc->req_xfer;
|
|
if (drive->pc_update_buffers)
|
|
drive->pc_update_buffers(drive, pc);
|
|
}
|
|
debug_log("%s: DMA finished\n", drive->name);
|
|
}
|
|
|
|
/* No more interrupts */
|
|
if ((stat & ATA_DRQ) == 0) {
|
|
int uptodate;
|
|
|
|
debug_log("Packet command completed, %d bytes transferred\n",
|
|
pc->xferred);
|
|
|
|
pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
|
|
|
|
local_irq_enable_in_hardirq();
|
|
|
|
if (drive->media == ide_tape &&
|
|
(stat & ATA_ERR) && rq->cmd[0] == REQUEST_SENSE)
|
|
stat &= ~ATA_ERR;
|
|
|
|
if ((stat & ATA_ERR) || (pc->flags & PC_FLAG_DMA_ERROR)) {
|
|
/* Error detected */
|
|
debug_log("%s: I/O error\n", drive->name);
|
|
|
|
if (drive->media != ide_tape)
|
|
pc->rq->errors++;
|
|
|
|
if (rq->cmd[0] == REQUEST_SENSE) {
|
|
printk(KERN_ERR "%s: I/O error in request sense"
|
|
" command\n", drive->name);
|
|
return ide_do_reset(drive);
|
|
}
|
|
|
|
debug_log("[cmd %x]: check condition\n", rq->cmd[0]);
|
|
|
|
/* Retry operation */
|
|
ide_retry_pc(drive, rq->rq_disk);
|
|
|
|
/* queued, but not started */
|
|
return ide_stopped;
|
|
}
|
|
pc->error = 0;
|
|
|
|
if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0)
|
|
dsc = 1;
|
|
|
|
/* Command finished - Call the callback function */
|
|
uptodate = drive->pc_callback(drive, dsc);
|
|
|
|
if (uptodate == 0)
|
|
drive->failed_pc = NULL;
|
|
|
|
if (blk_special_request(rq)) {
|
|
rq->errors = 0;
|
|
ide_complete_rq(drive, 0, blk_rq_bytes(rq));
|
|
} else {
|
|
if (blk_fs_request(rq) == 0 && uptodate <= 0) {
|
|
if (rq->errors == 0)
|
|
rq->errors = -EIO;
|
|
}
|
|
ide_complete_rq(drive, uptodate ? 0 : -EIO,
|
|
ide_rq_bytes(rq));
|
|
}
|
|
|
|
return ide_stopped;
|
|
}
|
|
|
|
if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
|
|
pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
|
|
printk(KERN_ERR "%s: The device wants to issue more interrupts "
|
|
"in DMA mode\n", drive->name);
|
|
ide_dma_off(drive);
|
|
return ide_do_reset(drive);
|
|
}
|
|
|
|
/* Get the number of bytes to transfer on this interrupt. */
|
|
ide_read_bcount_and_ireason(drive, &bcount, &ireason);
|
|
|
|
if (ireason & ATAPI_COD) {
|
|
printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
|
|
return ide_do_reset(drive);
|
|
}
|
|
|
|
if (((ireason & ATAPI_IO) == ATAPI_IO) ==
|
|
!!(pc->flags & PC_FLAG_WRITING)) {
|
|
/* Hopefully, we will never get here */
|
|
printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
|
|
"to %s!\n", drive->name,
|
|
(ireason & ATAPI_IO) ? "Write" : "Read",
|
|
(ireason & ATAPI_IO) ? "Read" : "Write");
|
|
return ide_do_reset(drive);
|
|
}
|
|
|
|
if (!(pc->flags & PC_FLAG_WRITING)) {
|
|
/* Reading - Check that we have enough space */
|
|
temp = pc->xferred + bcount;
|
|
if (temp > pc->req_xfer) {
|
|
if (temp > pc->buf_size) {
|
|
printk(KERN_ERR "%s: The device wants to send "
|
|
"us more data than expected - "
|
|
"discarding data\n",
|
|
drive->name);
|
|
|
|
ide_pad_transfer(drive, 0, bcount);
|
|
goto next_irq;
|
|
}
|
|
debug_log("The device wants to send us more data than "
|
|
"expected - allowing transfer\n");
|
|
}
|
|
xferfunc = tp_ops->input_data;
|
|
} else
|
|
xferfunc = tp_ops->output_data;
|
|
|
|
if ((drive->media == ide_floppy && !pc->buf) ||
|
|
(drive->media == ide_tape && pc->bh)) {
|
|
int done = drive->pc_io_buffers(drive, pc, bcount,
|
|
!!(pc->flags & PC_FLAG_WRITING));
|
|
|
|
/* FIXME: don't do partial completions */
|
|
if (drive->media == ide_floppy)
|
|
ide_complete_rq(drive, 0,
|
|
done ? done : ide_rq_bytes(rq));
|
|
} else
|
|
xferfunc(drive, NULL, pc->cur_pos, bcount);
|
|
|
|
/* Update the current position */
|
|
pc->xferred += bcount;
|
|
pc->cur_pos += bcount;
|
|
|
|
debug_log("[cmd %x] transferred %d bytes on that intr.\n",
|
|
rq->cmd[0], bcount);
|
|
next_irq:
|
|
/* And set the interrupt handler again */
|
|
ide_set_handler(drive, ide_pc_intr, timeout);
|
|
return ide_started;
|
|
}
|
|
|
|
static void ide_init_packet_cmd(struct ide_cmd *cmd, u32 tf_flags,
|
|
u16 bcount, u8 dma)
|
|
{
|
|
cmd->protocol = dma ? ATAPI_PROT_DMA : ATAPI_PROT_PIO;
|
|
cmd->tf_flags |= IDE_TFLAG_OUT_LBAH | IDE_TFLAG_OUT_LBAM |
|
|
IDE_TFLAG_OUT_FEATURE | tf_flags;
|
|
cmd->tf.command = ATA_CMD_PACKET;
|
|
cmd->tf.feature = dma; /* Use PIO/DMA */
|
|
cmd->tf.lbam = bcount & 0xff;
|
|
cmd->tf.lbah = (bcount >> 8) & 0xff;
|
|
}
|
|
|
|
static u8 ide_read_ireason(ide_drive_t *drive)
|
|
{
|
|
struct ide_cmd cmd;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.tf_flags = IDE_TFLAG_IN_NSECT;
|
|
|
|
drive->hwif->tp_ops->tf_read(drive, &cmd);
|
|
|
|
return cmd.tf.nsect & 3;
|
|
}
|
|
|
|
static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
|
|
{
|
|
int retries = 100;
|
|
|
|
while (retries-- && ((ireason & ATAPI_COD) == 0 ||
|
|
(ireason & ATAPI_IO))) {
|
|
printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
|
|
"a packet command, retrying\n", drive->name);
|
|
udelay(100);
|
|
ireason = ide_read_ireason(drive);
|
|
if (retries == 0) {
|
|
printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
|
|
"a packet command, ignoring\n",
|
|
drive->name);
|
|
ireason |= ATAPI_COD;
|
|
ireason &= ~ATAPI_IO;
|
|
}
|
|
}
|
|
|
|
return ireason;
|
|
}
|
|
|
|
static int ide_delayed_transfer_pc(ide_drive_t *drive)
|
|
{
|
|
/* Send the actual packet */
|
|
drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12);
|
|
|
|
/* Timeout for the packet command */
|
|
return WAIT_FLOPPY_CMD;
|
|
}
|
|
|
|
static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
|
|
{
|
|
struct ide_atapi_pc *uninitialized_var(pc);
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
struct request *rq = hwif->rq;
|
|
ide_expiry_t *expiry;
|
|
unsigned int timeout;
|
|
int cmd_len;
|
|
ide_startstop_t startstop;
|
|
u8 ireason;
|
|
|
|
if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) {
|
|
printk(KERN_ERR "%s: Strange, packet command initiated yet "
|
|
"DRQ isn't asserted\n", drive->name);
|
|
return startstop;
|
|
}
|
|
|
|
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
|
|
if (drive->dma)
|
|
drive->waiting_for_dma = 1;
|
|
}
|
|
|
|
if (dev_is_idecd(drive)) {
|
|
/* ATAPI commands get padded out to 12 bytes minimum */
|
|
cmd_len = COMMAND_SIZE(rq->cmd[0]);
|
|
if (cmd_len < ATAPI_MIN_CDB_BYTES)
|
|
cmd_len = ATAPI_MIN_CDB_BYTES;
|
|
|
|
timeout = rq->timeout;
|
|
expiry = ide_cd_expiry;
|
|
} else {
|
|
pc = drive->pc;
|
|
|
|
cmd_len = ATAPI_MIN_CDB_BYTES;
|
|
|
|
/*
|
|
* If necessary schedule the packet transfer to occur 'timeout'
|
|
* miliseconds later in ide_delayed_transfer_pc() after the
|
|
* device says it's ready for a packet.
|
|
*/
|
|
if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
|
|
timeout = drive->pc_delay;
|
|
expiry = &ide_delayed_transfer_pc;
|
|
} else {
|
|
timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
|
|
: WAIT_TAPE_CMD;
|
|
expiry = NULL;
|
|
}
|
|
|
|
ireason = ide_read_ireason(drive);
|
|
if (drive->media == ide_tape)
|
|
ireason = ide_wait_ireason(drive, ireason);
|
|
|
|
if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
|
|
printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
|
|
"a packet command\n", drive->name);
|
|
|
|
return ide_do_reset(drive);
|
|
}
|
|
}
|
|
|
|
hwif->expiry = expiry;
|
|
|
|
/* Set the interrupt routine */
|
|
ide_set_handler(drive,
|
|
(dev_is_idecd(drive) ? drive->irq_handler
|
|
: ide_pc_intr),
|
|
timeout);
|
|
|
|
/* Send the actual packet */
|
|
if ((drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) == 0)
|
|
hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len);
|
|
|
|
/* Begin DMA, if necessary */
|
|
if (dev_is_idecd(drive)) {
|
|
if (drive->dma)
|
|
hwif->dma_ops->dma_start(drive);
|
|
} else {
|
|
if (pc->flags & PC_FLAG_DMA_OK) {
|
|
pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
|
|
hwif->dma_ops->dma_start(drive);
|
|
}
|
|
}
|
|
|
|
return ide_started;
|
|
}
|
|
|
|
ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd)
|
|
{
|
|
struct ide_atapi_pc *pc;
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
const struct ide_dma_ops *dma_ops = hwif->dma_ops;
|
|
ide_expiry_t *expiry = NULL;
|
|
struct request *rq = hwif->rq;
|
|
unsigned int timeout;
|
|
u32 tf_flags;
|
|
u16 bcount;
|
|
u8 drq_int = !!(drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT);
|
|
|
|
if (dev_is_idecd(drive)) {
|
|
tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
|
|
bcount = ide_cd_get_xferlen(rq);
|
|
expiry = ide_cd_expiry;
|
|
timeout = ATAPI_WAIT_PC;
|
|
|
|
if (drive->dma) {
|
|
if (ide_build_sglist(drive, cmd))
|
|
drive->dma = !dma_ops->dma_setup(drive, cmd);
|
|
else
|
|
drive->dma = 0;
|
|
}
|
|
} else {
|
|
pc = drive->pc;
|
|
|
|
/* We haven't transferred any data yet */
|
|
pc->xferred = 0;
|
|
pc->cur_pos = pc->buf;
|
|
|
|
tf_flags = IDE_TFLAG_OUT_DEVICE;
|
|
bcount = ((drive->media == ide_tape) ?
|
|
pc->req_xfer :
|
|
min(pc->req_xfer, 63 * 1024));
|
|
|
|
if (pc->flags & PC_FLAG_DMA_ERROR) {
|
|
pc->flags &= ~PC_FLAG_DMA_ERROR;
|
|
ide_dma_off(drive);
|
|
}
|
|
|
|
if ((pc->flags & PC_FLAG_DMA_OK) &&
|
|
(drive->dev_flags & IDE_DFLAG_USING_DMA)) {
|
|
if (ide_build_sglist(drive, cmd))
|
|
drive->dma = !dma_ops->dma_setup(drive, cmd);
|
|
else
|
|
drive->dma = 0;
|
|
}
|
|
|
|
if (!drive->dma)
|
|
pc->flags &= ~PC_FLAG_DMA_OK;
|
|
|
|
timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
|
|
: WAIT_TAPE_CMD;
|
|
}
|
|
|
|
ide_init_packet_cmd(cmd, tf_flags, bcount, drive->dma);
|
|
|
|
(void)do_rw_taskfile(drive, cmd);
|
|
|
|
if (drq_int) {
|
|
if (drive->dma)
|
|
drive->waiting_for_dma = 0;
|
|
hwif->expiry = expiry;
|
|
}
|
|
|
|
ide_execute_command(drive, cmd, ide_transfer_pc, timeout);
|
|
|
|
return drq_int ? ide_started : ide_transfer_pc(drive);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_issue_pc);
|