linux/arch/arm/mach-pxa/Makefile

107 lines
4.0 KiB
Makefile

#
# Makefile for the linux kernel.
#
# Common support (must be linked before board specific support)
obj-y += clock.o devices.o generic.o irq.o \
time.o reset.o
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
ifeq ($(CONFIG_CPU_FREQ),y)
obj-$(CONFIG_PXA25x) += cpufreq-pxa2xx.o
obj-$(CONFIG_PXA27x) += cpufreq-pxa2xx.o
obj-$(CONFIG_PXA3xx) += cpufreq-pxa3xx.o
endif
# Generic drivers that other drivers may depend upon
# SoC-specific code
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa95x.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
# NOTE: keep the order of boards in accordance to their order in Kconfig
# Intel/Marvell Dev Platforms
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o
obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_TAVOREVB3) += tavorevb3.o
obj-$(CONFIG_MACH_SAAR) += saar.o
obj-$(CONFIG_MACH_SAARB) += saarb.o
# 3rd Party Dev Platforms
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_ARCH_VIPER) += viper.o
obj-$(CONFIG_MACH_ARCOM_ZEUS) += zeus.o
obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
obj-$(CONFIG_MACH_CSB726) += csb726.o
obj-$(CONFIG_CSB726_CSB701) += csb701.o
obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
endif
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
obj-$(CONFIG_MACH_INTELMOTE2) += stargate2.o
obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
obj-$(CONFIG_MACH_XCEP) += xcep.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
obj-$(CONFIG_MACH_COLIBRI_EVALBOARD) += colibri-evalboard.o
obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o
obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
obj-$(CONFIG_MACH_VPAC270) += vpac270.o
# End-user Products
obj-$(CONFIG_MACH_H4700) += hx4700.o
obj-$(CONFIG_MACH_H5000) += h5000.o
obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
obj-$(CONFIG_PXA_EZX) += ezx.o
obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
obj-$(CONFIG_MACH_PALMTC) += palmtc.o
obj-$(CONFIG_MACH_PALM27X) += palm27x.o
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
obj-$(CONFIG_MACH_PALMLD) += palmld.o
obj-$(CONFIG_PALM_TREO) += palmtreo.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_MACH_POODLE) += poodle.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
obj-$(CONFIG_MACH_ZIPIT2) += z2.o
# Support for blinky lights
led-y := leds.o
led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
obj-$(CONFIG_LEDS) += $(led-y)
obj-$(CONFIG_TOSA_BT) += tosa-bt.o