cd354f1ae7
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3483 lines
81 KiB
C
3483 lines
81 KiB
C
/*
|
|
* sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
|
|
*
|
|
* Main part
|
|
*
|
|
* Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria
|
|
*
|
|
* If distributed as part of the Linux kernel, this code is licensed under the
|
|
* terms of the GPL v2.
|
|
*
|
|
* Otherwise, the following license terms apply:
|
|
*
|
|
* * Redistribution and use in source and binary forms, with or without
|
|
* * modification, are permitted provided that the following conditions
|
|
* * are met:
|
|
* * 1) Redistributions of source code must retain the above copyright
|
|
* * notice, this list of conditions and the following disclaimer.
|
|
* * 2) Redistributions in binary form must reproduce the above copyright
|
|
* * notice, this list of conditions and the following disclaimer in the
|
|
* * documentation and/or other materials provided with the distribution.
|
|
* * 3) The name of the author may not be used to endorse or promote products
|
|
* * derived from this software without specific psisusbr written permission.
|
|
* *
|
|
* * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR
|
|
* * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* Author: Thomas Winischhofer <thomas@winischhofer.net>
|
|
*
|
|
*/
|
|
|
|
#include <linux/mutex.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/kref.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/vmalloc.h>
|
|
|
|
#include "sisusb.h"
|
|
#include "sisusb_init.h"
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
#include <linux/font.h>
|
|
#endif
|
|
|
|
#define SISUSB_DONTSYNC
|
|
|
|
/* Forward declarations / clean-up routines */
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
static int sisusb_first_vc = 0;
|
|
static int sisusb_last_vc = 0;
|
|
module_param_named(first, sisusb_first_vc, int, 0);
|
|
module_param_named(last, sisusb_last_vc, int, 0);
|
|
MODULE_PARM_DESC(first, "Number of first console to take over (1 - MAX_NR_CONSOLES)");
|
|
MODULE_PARM_DESC(last, "Number of last console to take over (1 - MAX_NR_CONSOLES)");
|
|
#endif
|
|
|
|
static struct usb_driver sisusb_driver;
|
|
|
|
DEFINE_MUTEX(disconnect_mutex);
|
|
|
|
static void
|
|
sisusb_free_buffers(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUMOBUFS; i++) {
|
|
if (sisusb->obuf[i]) {
|
|
usb_buffer_free(sisusb->sisusb_dev, sisusb->obufsize,
|
|
sisusb->obuf[i], sisusb->transfer_dma_out[i]);
|
|
sisusb->obuf[i] = NULL;
|
|
}
|
|
}
|
|
if (sisusb->ibuf) {
|
|
usb_buffer_free(sisusb->sisusb_dev, sisusb->ibufsize,
|
|
sisusb->ibuf, sisusb->transfer_dma_in);
|
|
sisusb->ibuf = NULL;
|
|
}
|
|
}
|
|
|
|
static void
|
|
sisusb_free_urbs(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUMOBUFS; i++) {
|
|
usb_free_urb(sisusb->sisurbout[i]);
|
|
sisusb->sisurbout[i] = NULL;
|
|
}
|
|
usb_free_urb(sisusb->sisurbin);
|
|
sisusb->sisurbin = NULL;
|
|
}
|
|
|
|
/* Level 0: USB transport layer */
|
|
|
|
/* 1. out-bulks */
|
|
|
|
/* out-urb management */
|
|
|
|
/* Return 1 if all free, 0 otherwise */
|
|
static int
|
|
sisusb_all_free(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sisusb->numobufs; i++) {
|
|
|
|
if (sisusb->urbstatus[i] & SU_URB_BUSY)
|
|
return 0;
|
|
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* Kill all busy URBs */
|
|
static void
|
|
sisusb_kill_all_busy(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int i;
|
|
|
|
if (sisusb_all_free(sisusb))
|
|
return;
|
|
|
|
for (i = 0; i < sisusb->numobufs; i++) {
|
|
|
|
if (sisusb->urbstatus[i] & SU_URB_BUSY)
|
|
usb_kill_urb(sisusb->sisurbout[i]);
|
|
|
|
}
|
|
}
|
|
|
|
/* Return 1 if ok, 0 if error (not all complete within timeout) */
|
|
static int
|
|
sisusb_wait_all_out_complete(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int timeout = 5 * HZ, i = 1;
|
|
|
|
wait_event_timeout(sisusb->wait_q,
|
|
(i = sisusb_all_free(sisusb)),
|
|
timeout);
|
|
|
|
return i;
|
|
}
|
|
|
|
static int
|
|
sisusb_outurb_available(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sisusb->numobufs; i++) {
|
|
|
|
if ((sisusb->urbstatus[i] & (SU_URB_BUSY|SU_URB_ALLOC)) == 0)
|
|
return i;
|
|
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int
|
|
sisusb_get_free_outbuf(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int i, timeout = 5 * HZ;
|
|
|
|
wait_event_timeout(sisusb->wait_q,
|
|
((i = sisusb_outurb_available(sisusb)) >= 0),
|
|
timeout);
|
|
|
|
return i;
|
|
}
|
|
|
|
static int
|
|
sisusb_alloc_outbuf(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int i;
|
|
|
|
i = sisusb_outurb_available(sisusb);
|
|
|
|
if (i >= 0)
|
|
sisusb->urbstatus[i] |= SU_URB_ALLOC;
|
|
|
|
return i;
|
|
}
|
|
|
|
static void
|
|
sisusb_free_outbuf(struct sisusb_usb_data *sisusb, int index)
|
|
{
|
|
if ((index >= 0) && (index < sisusb->numobufs))
|
|
sisusb->urbstatus[index] &= ~SU_URB_ALLOC;
|
|
}
|
|
|
|
/* completion callback */
|
|
|
|
static void
|
|
sisusb_bulk_completeout(struct urb *urb)
|
|
{
|
|
struct sisusb_urb_context *context = urb->context;
|
|
struct sisusb_usb_data *sisusb;
|
|
|
|
if (!context)
|
|
return;
|
|
|
|
sisusb = context->sisusb;
|
|
|
|
if (!sisusb || !sisusb->sisusb_dev || !sisusb->present)
|
|
return;
|
|
|
|
#ifndef SISUSB_DONTSYNC
|
|
if (context->actual_length)
|
|
*(context->actual_length) += urb->actual_length;
|
|
#endif
|
|
|
|
sisusb->urbstatus[context->urbindex] &= ~SU_URB_BUSY;
|
|
wake_up(&sisusb->wait_q);
|
|
}
|
|
|
|
static int
|
|
sisusb_bulkout_msg(struct sisusb_usb_data *sisusb, int index, unsigned int pipe, void *data,
|
|
int len, int *actual_length, int timeout, unsigned int tflags,
|
|
dma_addr_t transfer_dma)
|
|
{
|
|
struct urb *urb = sisusb->sisurbout[index];
|
|
int retval, byteswritten = 0;
|
|
|
|
/* Set up URB */
|
|
urb->transfer_flags = 0;
|
|
|
|
usb_fill_bulk_urb(urb, sisusb->sisusb_dev, pipe, data, len,
|
|
sisusb_bulk_completeout, &sisusb->urbout_context[index]);
|
|
|
|
urb->transfer_flags |= tflags;
|
|
urb->actual_length = 0;
|
|
|
|
if ((urb->transfer_dma = transfer_dma))
|
|
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
|
|
/* Set up context */
|
|
sisusb->urbout_context[index].actual_length = (timeout) ?
|
|
NULL : actual_length;
|
|
|
|
/* Declare this urb/buffer in use */
|
|
sisusb->urbstatus[index] |= SU_URB_BUSY;
|
|
|
|
/* Submit URB */
|
|
retval = usb_submit_urb(urb, GFP_ATOMIC);
|
|
|
|
/* If OK, and if timeout > 0, wait for completion */
|
|
if ((retval == 0) && timeout) {
|
|
wait_event_timeout(sisusb->wait_q,
|
|
(!(sisusb->urbstatus[index] & SU_URB_BUSY)),
|
|
timeout);
|
|
if (sisusb->urbstatus[index] & SU_URB_BUSY) {
|
|
/* URB timed out... kill it and report error */
|
|
usb_kill_urb(urb);
|
|
retval = -ETIMEDOUT;
|
|
} else {
|
|
/* Otherwise, report urb status */
|
|
retval = urb->status;
|
|
byteswritten = urb->actual_length;
|
|
}
|
|
}
|
|
|
|
if (actual_length)
|
|
*actual_length = byteswritten;
|
|
|
|
return retval;
|
|
}
|
|
|
|
/* 2. in-bulks */
|
|
|
|
/* completion callback */
|
|
|
|
static void
|
|
sisusb_bulk_completein(struct urb *urb)
|
|
{
|
|
struct sisusb_usb_data *sisusb = urb->context;
|
|
|
|
if (!sisusb || !sisusb->sisusb_dev || !sisusb->present)
|
|
return;
|
|
|
|
sisusb->completein = 1;
|
|
wake_up(&sisusb->wait_q);
|
|
}
|
|
|
|
static int
|
|
sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data, int len,
|
|
int *actual_length, int timeout, unsigned int tflags, dma_addr_t transfer_dma)
|
|
{
|
|
struct urb *urb = sisusb->sisurbin;
|
|
int retval, readbytes = 0;
|
|
|
|
urb->transfer_flags = 0;
|
|
|
|
usb_fill_bulk_urb(urb, sisusb->sisusb_dev, pipe, data, len,
|
|
sisusb_bulk_completein, sisusb);
|
|
|
|
urb->transfer_flags |= tflags;
|
|
urb->actual_length = 0;
|
|
|
|
if ((urb->transfer_dma = transfer_dma))
|
|
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
|
|
sisusb->completein = 0;
|
|
retval = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (retval == 0) {
|
|
wait_event_timeout(sisusb->wait_q, sisusb->completein, timeout);
|
|
if (!sisusb->completein) {
|
|
/* URB timed out... kill it and report error */
|
|
usb_kill_urb(urb);
|
|
retval = -ETIMEDOUT;
|
|
} else {
|
|
/* URB completed within timout */
|
|
retval = urb->status;
|
|
readbytes = urb->actual_length;
|
|
}
|
|
}
|
|
|
|
if (actual_length)
|
|
*actual_length = readbytes;
|
|
|
|
return retval;
|
|
}
|
|
|
|
|
|
/* Level 1: */
|
|
|
|
/* Send a bulk message of variable size
|
|
*
|
|
* To copy the data from userspace, give pointer to "userbuffer",
|
|
* to copy from (non-DMA) kernel memory, give "kernbuffer". If
|
|
* both of these are NULL, it is assumed, that the transfer
|
|
* buffer "sisusb->obuf[index]" is set up with the data to send.
|
|
* Index is ignored if either kernbuffer or userbuffer is set.
|
|
* If async is nonzero, URBs will be sent without waiting for
|
|
* completion of the previous URB.
|
|
*
|
|
* (return 0 on success)
|
|
*/
|
|
|
|
static int sisusb_send_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len,
|
|
char *kernbuffer, const char __user *userbuffer, int index,
|
|
ssize_t *bytes_written, unsigned int tflags, int async)
|
|
{
|
|
int result = 0, retry, count = len;
|
|
int passsize, thispass, transferred_len = 0;
|
|
int fromuser = (userbuffer != NULL) ? 1 : 0;
|
|
int fromkern = (kernbuffer != NULL) ? 1 : 0;
|
|
unsigned int pipe;
|
|
char *buffer;
|
|
|
|
(*bytes_written) = 0;
|
|
|
|
/* Sanity check */
|
|
if (!sisusb || !sisusb->present || !sisusb->sisusb_dev)
|
|
return -ENODEV;
|
|
|
|
/* If we copy data from kernel or userspace, force the
|
|
* allocation of a buffer/urb. If we have the data in
|
|
* the transfer buffer[index] already, reuse the buffer/URB
|
|
* if the length is > buffer size. (So, transmitting
|
|
* large data amounts directly from the transfer buffer
|
|
* treats the buffer as a ring buffer. However, we need
|
|
* to sync in this case.)
|
|
*/
|
|
if (fromuser || fromkern)
|
|
index = -1;
|
|
else if (len > sisusb->obufsize)
|
|
async = 0;
|
|
|
|
pipe = usb_sndbulkpipe(sisusb->sisusb_dev, ep);
|
|
|
|
do {
|
|
passsize = thispass = (sisusb->obufsize < count) ?
|
|
sisusb->obufsize : count;
|
|
|
|
if (index < 0)
|
|
index = sisusb_get_free_outbuf(sisusb);
|
|
|
|
if (index < 0)
|
|
return -EIO;
|
|
|
|
buffer = sisusb->obuf[index];
|
|
|
|
if (fromuser) {
|
|
|
|
if (copy_from_user(buffer, userbuffer, passsize))
|
|
return -EFAULT;
|
|
|
|
userbuffer += passsize;
|
|
|
|
} else if (fromkern) {
|
|
|
|
memcpy(buffer, kernbuffer, passsize);
|
|
kernbuffer += passsize;
|
|
|
|
}
|
|
|
|
retry = 5;
|
|
while (thispass) {
|
|
|
|
if (!sisusb->sisusb_dev)
|
|
return -ENODEV;
|
|
|
|
result = sisusb_bulkout_msg(sisusb,
|
|
index,
|
|
pipe,
|
|
buffer,
|
|
thispass,
|
|
&transferred_len,
|
|
async ? 0 : 5 * HZ,
|
|
tflags,
|
|
sisusb->transfer_dma_out[index]);
|
|
|
|
if (result == -ETIMEDOUT) {
|
|
|
|
/* Will not happen if async */
|
|
if (!retry--)
|
|
return -ETIME;
|
|
|
|
continue;
|
|
|
|
} else if ((result == 0) && !async && transferred_len) {
|
|
|
|
thispass -= transferred_len;
|
|
if (thispass) {
|
|
if (sisusb->transfer_dma_out) {
|
|
/* If DMA, copy remaining
|
|
* to beginning of buffer
|
|
*/
|
|
memcpy(buffer,
|
|
buffer + transferred_len,
|
|
thispass);
|
|
} else {
|
|
/* If not DMA, simply increase
|
|
* the pointer
|
|
*/
|
|
buffer += transferred_len;
|
|
}
|
|
}
|
|
|
|
} else
|
|
break;
|
|
};
|
|
|
|
if (result)
|
|
return result;
|
|
|
|
(*bytes_written) += passsize;
|
|
count -= passsize;
|
|
|
|
/* Force new allocation in next iteration */
|
|
if (fromuser || fromkern)
|
|
index = -1;
|
|
|
|
} while (count > 0);
|
|
|
|
if (async) {
|
|
#ifdef SISUSB_DONTSYNC
|
|
(*bytes_written) = len;
|
|
/* Some URBs/buffers might be busy */
|
|
#else
|
|
sisusb_wait_all_out_complete(sisusb);
|
|
(*bytes_written) = transferred_len;
|
|
/* All URBs and all buffers are available */
|
|
#endif
|
|
}
|
|
|
|
return ((*bytes_written) == len) ? 0 : -EIO;
|
|
}
|
|
|
|
/* Receive a bulk message of variable size
|
|
*
|
|
* To copy the data to userspace, give pointer to "userbuffer",
|
|
* to copy to kernel memory, give "kernbuffer". One of them
|
|
* MUST be set. (There is no technique for letting the caller
|
|
* read directly from the ibuf.)
|
|
*
|
|
*/
|
|
|
|
static int sisusb_recv_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len,
|
|
void *kernbuffer, char __user *userbuffer, ssize_t *bytes_read,
|
|
unsigned int tflags)
|
|
{
|
|
int result = 0, retry, count = len;
|
|
int bufsize, thispass, transferred_len;
|
|
unsigned int pipe;
|
|
char *buffer;
|
|
|
|
(*bytes_read) = 0;
|
|
|
|
/* Sanity check */
|
|
if (!sisusb || !sisusb->present || !sisusb->sisusb_dev)
|
|
return -ENODEV;
|
|
|
|
pipe = usb_rcvbulkpipe(sisusb->sisusb_dev, ep);
|
|
buffer = sisusb->ibuf;
|
|
bufsize = sisusb->ibufsize;
|
|
|
|
retry = 5;
|
|
|
|
#ifdef SISUSB_DONTSYNC
|
|
if (!(sisusb_wait_all_out_complete(sisusb)))
|
|
return -EIO;
|
|
#endif
|
|
|
|
while (count > 0) {
|
|
|
|
if (!sisusb->sisusb_dev)
|
|
return -ENODEV;
|
|
|
|
thispass = (bufsize < count) ? bufsize : count;
|
|
|
|
result = sisusb_bulkin_msg(sisusb,
|
|
pipe,
|
|
buffer,
|
|
thispass,
|
|
&transferred_len,
|
|
5 * HZ,
|
|
tflags,
|
|
sisusb->transfer_dma_in);
|
|
|
|
if (transferred_len)
|
|
thispass = transferred_len;
|
|
|
|
else if (result == -ETIMEDOUT) {
|
|
|
|
if (!retry--)
|
|
return -ETIME;
|
|
|
|
continue;
|
|
|
|
} else
|
|
return -EIO;
|
|
|
|
|
|
if (thispass) {
|
|
|
|
(*bytes_read) += thispass;
|
|
count -= thispass;
|
|
|
|
if (userbuffer) {
|
|
|
|
if (copy_to_user(userbuffer, buffer, thispass))
|
|
return -EFAULT;
|
|
|
|
userbuffer += thispass;
|
|
|
|
} else {
|
|
|
|
memcpy(kernbuffer, buffer, thispass);
|
|
kernbuffer += thispass;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return ((*bytes_read) == len) ? 0 : -EIO;
|
|
}
|
|
|
|
static int sisusb_send_packet(struct sisusb_usb_data *sisusb, int len,
|
|
struct sisusb_packet *packet)
|
|
{
|
|
int ret;
|
|
ssize_t bytes_transferred = 0;
|
|
__le32 tmp;
|
|
|
|
if (len == 6)
|
|
packet->data = 0;
|
|
|
|
#ifdef SISUSB_DONTSYNC
|
|
if (!(sisusb_wait_all_out_complete(sisusb)))
|
|
return 1;
|
|
#endif
|
|
|
|
/* Eventually correct endianness */
|
|
SISUSB_CORRECT_ENDIANNESS_PACKET(packet);
|
|
|
|
/* 1. send the packet */
|
|
ret = sisusb_send_bulk_msg(sisusb, SISUSB_EP_GFX_OUT, len,
|
|
(char *)packet, NULL, 0, &bytes_transferred, 0, 0);
|
|
|
|
if ((ret == 0) && (len == 6)) {
|
|
|
|
/* 2. if packet len == 6, it means we read, so wait for 32bit
|
|
* return value and write it to packet->data
|
|
*/
|
|
ret = sisusb_recv_bulk_msg(sisusb, SISUSB_EP_GFX_IN, 4,
|
|
(char *)&tmp, NULL, &bytes_transferred, 0);
|
|
|
|
packet->data = le32_to_cpu(tmp);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_send_bridge_packet(struct sisusb_usb_data *sisusb, int len,
|
|
struct sisusb_packet *packet,
|
|
unsigned int tflags)
|
|
{
|
|
int ret;
|
|
ssize_t bytes_transferred = 0;
|
|
__le32 tmp;
|
|
|
|
if (len == 6)
|
|
packet->data = 0;
|
|
|
|
#ifdef SISUSB_DONTSYNC
|
|
if (!(sisusb_wait_all_out_complete(sisusb)))
|
|
return 1;
|
|
#endif
|
|
|
|
/* Eventually correct endianness */
|
|
SISUSB_CORRECT_ENDIANNESS_PACKET(packet);
|
|
|
|
/* 1. send the packet */
|
|
ret = sisusb_send_bulk_msg(sisusb, SISUSB_EP_BRIDGE_OUT, len,
|
|
(char *)packet, NULL, 0, &bytes_transferred, tflags, 0);
|
|
|
|
if ((ret == 0) && (len == 6)) {
|
|
|
|
/* 2. if packet len == 6, it means we read, so wait for 32bit
|
|
* return value and write it to packet->data
|
|
*/
|
|
ret = sisusb_recv_bulk_msg(sisusb, SISUSB_EP_BRIDGE_IN, 4,
|
|
(char *)&tmp, NULL, &bytes_transferred, 0);
|
|
|
|
packet->data = le32_to_cpu(tmp);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* access video memory and mmio (return 0 on success) */
|
|
|
|
/* Low level */
|
|
|
|
/* The following routines assume being used to transfer byte, word,
|
|
* long etc.
|
|
* This means that
|
|
* - the write routines expect "data" in machine endianness format.
|
|
* The data will be converted to leXX in sisusb_xxx_packet.
|
|
* - the read routines can expect read data in machine-endianess.
|
|
*/
|
|
|
|
static int sisusb_write_memio_byte(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u8 data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret;
|
|
|
|
packet.header = (1 << (addr & 3)) | (type << 6);
|
|
packet.address = addr & ~3;
|
|
packet.data = data << ((addr & 3) << 3);
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_write_memio_word(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u16 data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret = 0;
|
|
|
|
packet.address = addr & ~3;
|
|
|
|
switch (addr & 3) {
|
|
case 0:
|
|
packet.header = (type << 6) | 0x0003;
|
|
packet.data = (u32)data;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 1:
|
|
packet.header = (type << 6) | 0x0006;
|
|
packet.data = (u32)data << 8;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 2:
|
|
packet.header = (type << 6) | 0x000c;
|
|
packet.data = (u32)data << 16;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 3:
|
|
packet.header = (type << 6) | 0x0008;
|
|
packet.data = (u32)data << 24;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
packet.header = (type << 6) | 0x0001;
|
|
packet.address = (addr & ~3) + 4;
|
|
packet.data = (u32)data >> 8;
|
|
ret |= sisusb_send_packet(sisusb, 10, &packet);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_write_memio_24bit(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u32 data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret = 0;
|
|
|
|
packet.address = addr & ~3;
|
|
|
|
switch (addr & 3) {
|
|
case 0:
|
|
packet.header = (type << 6) | 0x0007;
|
|
packet.data = data & 0x00ffffff;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 1:
|
|
packet.header = (type << 6) | 0x000e;
|
|
packet.data = data << 8;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 2:
|
|
packet.header = (type << 6) | 0x000c;
|
|
packet.data = data << 16;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
packet.header = (type << 6) | 0x0001;
|
|
packet.address = (addr & ~3) + 4;
|
|
packet.data = (data >> 16) & 0x00ff;
|
|
ret |= sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 3:
|
|
packet.header = (type << 6) | 0x0008;
|
|
packet.data = data << 24;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
packet.header = (type << 6) | 0x0003;
|
|
packet.address = (addr & ~3) + 4;
|
|
packet.data = (data >> 8) & 0xffff;
|
|
ret |= sisusb_send_packet(sisusb, 10, &packet);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_write_memio_long(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u32 data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret = 0;
|
|
|
|
packet.address = addr & ~3;
|
|
|
|
switch (addr & 3) {
|
|
case 0:
|
|
packet.header = (type << 6) | 0x000f;
|
|
packet.data = data;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 1:
|
|
packet.header = (type << 6) | 0x000e;
|
|
packet.data = data << 8;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
packet.header = (type << 6) | 0x0001;
|
|
packet.address = (addr & ~3) + 4;
|
|
packet.data = data >> 24;
|
|
ret |= sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 2:
|
|
packet.header = (type << 6) | 0x000c;
|
|
packet.data = data << 16;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
packet.header = (type << 6) | 0x0003;
|
|
packet.address = (addr & ~3) + 4;
|
|
packet.data = data >> 16;
|
|
ret |= sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 3:
|
|
packet.header = (type << 6) | 0x0008;
|
|
packet.data = data << 24;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
packet.header = (type << 6) | 0x0007;
|
|
packet.address = (addr & ~3) + 4;
|
|
packet.data = data >> 8;
|
|
ret |= sisusb_send_packet(sisusb, 10, &packet);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* The xxx_bulk routines copy a buffer of variable size. They treat the
|
|
* buffer as chars, therefore lsb/msb has to be corrected if using the
|
|
* byte/word/long/etc routines for speed-up
|
|
*
|
|
* If data is from userland, set "userbuffer" (and clear "kernbuffer"),
|
|
* if data is in kernel space, set "kernbuffer" (and clear "userbuffer");
|
|
* if neither "kernbuffer" nor "userbuffer" are given, it is assumed
|
|
* that the data already is in the transfer buffer "sisusb->obuf[index]".
|
|
*/
|
|
|
|
static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr,
|
|
char *kernbuffer, int length,
|
|
const char __user *userbuffer, int index,
|
|
ssize_t *bytes_written)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret = 0;
|
|
static int msgcount = 0;
|
|
u8 swap8, fromkern = kernbuffer ? 1 : 0;
|
|
u16 swap16;
|
|
u32 swap32, flag = (length >> 28) & 1;
|
|
char buf[4];
|
|
|
|
/* if neither kernbuffer not userbuffer are given, assume
|
|
* data in obuf
|
|
*/
|
|
if (!fromkern && !userbuffer)
|
|
kernbuffer = sisusb->obuf[index];
|
|
|
|
(*bytes_written = 0);
|
|
|
|
length &= 0x00ffffff;
|
|
|
|
while (length) {
|
|
|
|
switch (length) {
|
|
|
|
case 1:
|
|
if (userbuffer) {
|
|
if (get_user(swap8, (u8 __user *)userbuffer))
|
|
return -EFAULT;
|
|
} else
|
|
swap8 = kernbuffer[0];
|
|
|
|
ret = sisusb_write_memio_byte(sisusb,
|
|
SISUSB_TYPE_MEM,
|
|
addr, swap8);
|
|
|
|
if (!ret)
|
|
(*bytes_written)++;
|
|
|
|
return ret;
|
|
|
|
case 2:
|
|
if (userbuffer) {
|
|
if (get_user(swap16, (u16 __user *)userbuffer))
|
|
return -EFAULT;
|
|
} else
|
|
swap16 = *((u16 *)kernbuffer);
|
|
|
|
ret = sisusb_write_memio_word(sisusb,
|
|
SISUSB_TYPE_MEM,
|
|
addr,
|
|
swap16);
|
|
|
|
if (!ret)
|
|
(*bytes_written) += 2;
|
|
|
|
return ret;
|
|
|
|
case 3:
|
|
if (userbuffer) {
|
|
if (copy_from_user(&buf, userbuffer, 3))
|
|
return -EFAULT;
|
|
#ifdef __BIG_ENDIAN
|
|
swap32 = (buf[0] << 16) |
|
|
(buf[1] << 8) |
|
|
buf[2];
|
|
#else
|
|
swap32 = (buf[2] << 16) |
|
|
(buf[1] << 8) |
|
|
buf[0];
|
|
#endif
|
|
} else
|
|
#ifdef __BIG_ENDIAN
|
|
swap32 = (kernbuffer[0] << 16) |
|
|
(kernbuffer[1] << 8) |
|
|
kernbuffer[2];
|
|
#else
|
|
swap32 = (kernbuffer[2] << 16) |
|
|
(kernbuffer[1] << 8) |
|
|
kernbuffer[0];
|
|
#endif
|
|
|
|
ret = sisusb_write_memio_24bit(sisusb,
|
|
SISUSB_TYPE_MEM,
|
|
addr,
|
|
swap32);
|
|
|
|
if (!ret)
|
|
(*bytes_written) += 3;
|
|
|
|
return ret;
|
|
|
|
case 4:
|
|
if (userbuffer) {
|
|
if (get_user(swap32, (u32 __user *)userbuffer))
|
|
return -EFAULT;
|
|
} else
|
|
swap32 = *((u32 *)kernbuffer);
|
|
|
|
ret = sisusb_write_memio_long(sisusb,
|
|
SISUSB_TYPE_MEM,
|
|
addr,
|
|
swap32);
|
|
if (!ret)
|
|
(*bytes_written) += 4;
|
|
|
|
return ret;
|
|
|
|
default:
|
|
if ((length & ~3) > 0x10000) {
|
|
|
|
packet.header = 0x001f;
|
|
packet.address = 0x000001d4;
|
|
packet.data = addr;
|
|
ret = sisusb_send_bridge_packet(sisusb, 10,
|
|
&packet, 0);
|
|
packet.header = 0x001f;
|
|
packet.address = 0x000001d0;
|
|
packet.data = (length & ~3);
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10,
|
|
&packet, 0);
|
|
packet.header = 0x001f;
|
|
packet.address = 0x000001c0;
|
|
packet.data = flag | 0x16;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10,
|
|
&packet, 0);
|
|
if (userbuffer) {
|
|
ret |= sisusb_send_bulk_msg(sisusb,
|
|
SISUSB_EP_GFX_LBULK_OUT,
|
|
(length & ~3),
|
|
NULL, userbuffer, 0,
|
|
bytes_written, 0, 1);
|
|
userbuffer += (*bytes_written);
|
|
} else if (fromkern) {
|
|
ret |= sisusb_send_bulk_msg(sisusb,
|
|
SISUSB_EP_GFX_LBULK_OUT,
|
|
(length & ~3),
|
|
kernbuffer, NULL, 0,
|
|
bytes_written, 0, 1);
|
|
kernbuffer += (*bytes_written);
|
|
} else {
|
|
ret |= sisusb_send_bulk_msg(sisusb,
|
|
SISUSB_EP_GFX_LBULK_OUT,
|
|
(length & ~3),
|
|
NULL, NULL, index,
|
|
bytes_written, 0, 1);
|
|
kernbuffer += ((*bytes_written) &
|
|
(sisusb->obufsize-1));
|
|
}
|
|
|
|
} else {
|
|
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000194;
|
|
packet.data = addr;
|
|
ret = sisusb_send_bridge_packet(sisusb, 10,
|
|
&packet, 0);
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000190;
|
|
packet.data = (length & ~3);
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10,
|
|
&packet, 0);
|
|
if (sisusb->flagb0 != 0x16) {
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000180;
|
|
packet.data = flag | 0x16;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10,
|
|
&packet, 0);
|
|
sisusb->flagb0 = 0x16;
|
|
}
|
|
if (userbuffer) {
|
|
ret |= sisusb_send_bulk_msg(sisusb,
|
|
SISUSB_EP_GFX_BULK_OUT,
|
|
(length & ~3),
|
|
NULL, userbuffer, 0,
|
|
bytes_written, 0, 1);
|
|
userbuffer += (*bytes_written);
|
|
} else if (fromkern) {
|
|
ret |= sisusb_send_bulk_msg(sisusb,
|
|
SISUSB_EP_GFX_BULK_OUT,
|
|
(length & ~3),
|
|
kernbuffer, NULL, 0,
|
|
bytes_written, 0, 1);
|
|
kernbuffer += (*bytes_written);
|
|
} else {
|
|
ret |= sisusb_send_bulk_msg(sisusb,
|
|
SISUSB_EP_GFX_BULK_OUT,
|
|
(length & ~3),
|
|
NULL, NULL, index,
|
|
bytes_written, 0, 1);
|
|
kernbuffer += ((*bytes_written) &
|
|
(sisusb->obufsize-1));
|
|
}
|
|
}
|
|
if (ret) {
|
|
msgcount++;
|
|
if (msgcount < 500)
|
|
printk(KERN_ERR
|
|
"sisusbvga[%d]: Wrote %zd of "
|
|
"%d bytes, error %d\n",
|
|
sisusb->minor, *bytes_written,
|
|
length, ret);
|
|
else if (msgcount == 500)
|
|
printk(KERN_ERR
|
|
"sisusbvga[%d]: Too many errors"
|
|
", logging stopped\n",
|
|
sisusb->minor);
|
|
}
|
|
addr += (*bytes_written);
|
|
length -= (*bytes_written);
|
|
}
|
|
|
|
if (ret)
|
|
break;
|
|
|
|
}
|
|
|
|
return ret ? -EIO : 0;
|
|
}
|
|
|
|
/* Remember: Read data in packet is in machine-endianess! So for
|
|
* byte, word, 24bit, long no endian correction is necessary.
|
|
*/
|
|
|
|
static int sisusb_read_memio_byte(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u8 *data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret;
|
|
|
|
CLEARPACKET(&packet);
|
|
packet.header = (1 << (addr & 3)) | (type << 6);
|
|
packet.address = addr & ~3;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = (u8)(packet.data >> ((addr & 3) << 3));
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_read_memio_word(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u16 *data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret = 0;
|
|
|
|
CLEARPACKET(&packet);
|
|
|
|
packet.address = addr & ~3;
|
|
|
|
switch (addr & 3) {
|
|
case 0:
|
|
packet.header = (type << 6) | 0x0003;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = (u16)(packet.data);
|
|
break;
|
|
case 1:
|
|
packet.header = (type << 6) | 0x0006;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = (u16)(packet.data >> 8);
|
|
break;
|
|
case 2:
|
|
packet.header = (type << 6) | 0x000c;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = (u16)(packet.data >> 16);
|
|
break;
|
|
case 3:
|
|
packet.header = (type << 6) | 0x0008;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = (u16)(packet.data >> 24);
|
|
packet.header = (type << 6) | 0x0001;
|
|
packet.address = (addr & ~3) + 4;
|
|
ret |= sisusb_send_packet(sisusb, 6, &packet);
|
|
*data |= (u16)(packet.data << 8);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_read_memio_24bit(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u32 *data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret = 0;
|
|
|
|
packet.address = addr & ~3;
|
|
|
|
switch (addr & 3) {
|
|
case 0:
|
|
packet.header = (type << 6) | 0x0007;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data & 0x00ffffff;
|
|
break;
|
|
case 1:
|
|
packet.header = (type << 6) | 0x000e;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data >> 8;
|
|
break;
|
|
case 2:
|
|
packet.header = (type << 6) | 0x000c;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data >> 16;
|
|
packet.header = (type << 6) | 0x0001;
|
|
packet.address = (addr & ~3) + 4;
|
|
ret |= sisusb_send_packet(sisusb, 6, &packet);
|
|
*data |= ((packet.data & 0xff) << 16);
|
|
break;
|
|
case 3:
|
|
packet.header = (type << 6) | 0x0008;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data >> 24;
|
|
packet.header = (type << 6) | 0x0003;
|
|
packet.address = (addr & ~3) + 4;
|
|
ret |= sisusb_send_packet(sisusb, 6, &packet);
|
|
*data |= ((packet.data & 0xffff) << 8);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_read_memio_long(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u32 *data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret = 0;
|
|
|
|
packet.address = addr & ~3;
|
|
|
|
switch (addr & 3) {
|
|
case 0:
|
|
packet.header = (type << 6) | 0x000f;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data;
|
|
break;
|
|
case 1:
|
|
packet.header = (type << 6) | 0x000e;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data >> 8;
|
|
packet.header = (type << 6) | 0x0001;
|
|
packet.address = (addr & ~3) + 4;
|
|
ret |= sisusb_send_packet(sisusb, 6, &packet);
|
|
*data |= (packet.data << 24);
|
|
break;
|
|
case 2:
|
|
packet.header = (type << 6) | 0x000c;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data >> 16;
|
|
packet.header = (type << 6) | 0x0003;
|
|
packet.address = (addr & ~3) + 4;
|
|
ret |= sisusb_send_packet(sisusb, 6, &packet);
|
|
*data |= (packet.data << 16);
|
|
break;
|
|
case 3:
|
|
packet.header = (type << 6) | 0x0008;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data >> 24;
|
|
packet.header = (type << 6) | 0x0007;
|
|
packet.address = (addr & ~3) + 4;
|
|
ret |= sisusb_send_packet(sisusb, 6, &packet);
|
|
*data |= (packet.data << 8);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_read_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr,
|
|
char *kernbuffer, int length,
|
|
char __user *userbuffer, ssize_t *bytes_read)
|
|
{
|
|
int ret = 0;
|
|
char buf[4];
|
|
u16 swap16;
|
|
u32 swap32;
|
|
|
|
(*bytes_read = 0);
|
|
|
|
length &= 0x00ffffff;
|
|
|
|
while (length) {
|
|
|
|
switch (length) {
|
|
|
|
case 1:
|
|
|
|
ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM,
|
|
addr, &buf[0]);
|
|
if (!ret) {
|
|
(*bytes_read)++;
|
|
if (userbuffer) {
|
|
if (put_user(buf[0],
|
|
(u8 __user *)userbuffer)) {
|
|
return -EFAULT;
|
|
}
|
|
} else {
|
|
kernbuffer[0] = buf[0];
|
|
}
|
|
}
|
|
return ret;
|
|
|
|
case 2:
|
|
ret |= sisusb_read_memio_word(sisusb, SISUSB_TYPE_MEM,
|
|
addr, &swap16);
|
|
if (!ret) {
|
|
(*bytes_read) += 2;
|
|
if (userbuffer) {
|
|
if (put_user(swap16,
|
|
(u16 __user *)userbuffer))
|
|
return -EFAULT;
|
|
} else {
|
|
*((u16 *)kernbuffer) = swap16;
|
|
}
|
|
}
|
|
return ret;
|
|
|
|
case 3:
|
|
ret |= sisusb_read_memio_24bit(sisusb, SISUSB_TYPE_MEM,
|
|
addr, &swap32);
|
|
if (!ret) {
|
|
(*bytes_read) += 3;
|
|
#ifdef __BIG_ENDIAN
|
|
buf[0] = (swap32 >> 16) & 0xff;
|
|
buf[1] = (swap32 >> 8) & 0xff;
|
|
buf[2] = swap32 & 0xff;
|
|
#else
|
|
buf[2] = (swap32 >> 16) & 0xff;
|
|
buf[1] = (swap32 >> 8) & 0xff;
|
|
buf[0] = swap32 & 0xff;
|
|
#endif
|
|
if (userbuffer) {
|
|
if (copy_to_user(userbuffer, &buf[0], 3))
|
|
return -EFAULT;
|
|
} else {
|
|
kernbuffer[0] = buf[0];
|
|
kernbuffer[1] = buf[1];
|
|
kernbuffer[2] = buf[2];
|
|
}
|
|
}
|
|
return ret;
|
|
|
|
default:
|
|
ret |= sisusb_read_memio_long(sisusb, SISUSB_TYPE_MEM,
|
|
addr, &swap32);
|
|
if (!ret) {
|
|
(*bytes_read) += 4;
|
|
if (userbuffer) {
|
|
if (put_user(swap32,
|
|
(u32 __user *)userbuffer))
|
|
return -EFAULT;
|
|
|
|
userbuffer += 4;
|
|
} else {
|
|
*((u32 *)kernbuffer) = swap32;
|
|
kernbuffer += 4;
|
|
}
|
|
addr += 4;
|
|
length -= 4;
|
|
}
|
|
#if 0 /* That does not work, as EP 2 is an OUT EP! */
|
|
default:
|
|
CLEARPACKET(&packet);
|
|
packet.header = 0x001f;
|
|
packet.address = 0x000001a0;
|
|
packet.data = 0x00000006;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10,
|
|
&packet, 0);
|
|
packet.header = 0x001f;
|
|
packet.address = 0x000001b0;
|
|
packet.data = (length & ~3) | 0x40000000;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10,
|
|
&packet, 0);
|
|
packet.header = 0x001f;
|
|
packet.address = 0x000001b4;
|
|
packet.data = addr;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10,
|
|
&packet, 0);
|
|
packet.header = 0x001f;
|
|
packet.address = 0x000001a4;
|
|
packet.data = 0x00000001;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10,
|
|
&packet, 0);
|
|
if (userbuffer) {
|
|
ret |= sisusb_recv_bulk_msg(sisusb,
|
|
SISUSB_EP_GFX_BULK_IN,
|
|
(length & ~3),
|
|
NULL, userbuffer,
|
|
bytes_read, 0);
|
|
if (!ret) userbuffer += (*bytes_read);
|
|
} else {
|
|
ret |= sisusb_recv_bulk_msg(sisusb,
|
|
SISUSB_EP_GFX_BULK_IN,
|
|
(length & ~3),
|
|
kernbuffer, NULL,
|
|
bytes_read, 0);
|
|
if (!ret) kernbuffer += (*bytes_read);
|
|
}
|
|
addr += (*bytes_read);
|
|
length -= (*bytes_read);
|
|
#endif
|
|
}
|
|
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* High level: Gfx (indexed) register access */
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
int
|
|
sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data)
|
|
{
|
|
return sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
|
|
}
|
|
|
|
int
|
|
sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 *data)
|
|
{
|
|
return sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
|
|
}
|
|
#endif
|
|
|
|
int
|
|
sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port, u8 index, u8 data)
|
|
{
|
|
int ret;
|
|
ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, index);
|
|
ret |= sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, data);
|
|
return ret;
|
|
}
|
|
|
|
int
|
|
sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port, u8 index, u8 *data)
|
|
{
|
|
int ret;
|
|
ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, index);
|
|
ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, data);
|
|
return ret;
|
|
}
|
|
|
|
int
|
|
sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port, u8 idx,
|
|
u8 myand, u8 myor)
|
|
{
|
|
int ret;
|
|
u8 tmp;
|
|
|
|
ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, idx);
|
|
ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, &tmp);
|
|
tmp &= myand;
|
|
tmp |= myor;
|
|
ret |= sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, tmp);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sisusb_setidxregmask(struct sisusb_usb_data *sisusb, int port, u8 idx,
|
|
u8 data, u8 mask)
|
|
{
|
|
int ret;
|
|
u8 tmp;
|
|
ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, idx);
|
|
ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, &tmp);
|
|
tmp &= ~(mask);
|
|
tmp |= (data & mask);
|
|
ret |= sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, tmp);
|
|
return ret;
|
|
}
|
|
|
|
int
|
|
sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port, u8 index, u8 myor)
|
|
{
|
|
return(sisusb_setidxregandor(sisusb, port, index, 0xff, myor));
|
|
}
|
|
|
|
int
|
|
sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port, u8 idx, u8 myand)
|
|
{
|
|
return(sisusb_setidxregandor(sisusb, port, idx, myand, 0x00));
|
|
}
|
|
|
|
/* Write/read video ram */
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
int
|
|
sisusb_writeb(struct sisusb_usb_data *sisusb, u32 adr, u8 data)
|
|
{
|
|
return(sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data));
|
|
}
|
|
|
|
int
|
|
sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data)
|
|
{
|
|
return(sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data));
|
|
}
|
|
|
|
#if 0
|
|
|
|
int
|
|
sisusb_writew(struct sisusb_usb_data *sisusb, u32 adr, u16 data)
|
|
{
|
|
return(sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM, adr, data));
|
|
}
|
|
|
|
int
|
|
sisusb_readw(struct sisusb_usb_data *sisusb, u32 adr, u16 *data)
|
|
{
|
|
return(sisusb_read_memio_word(sisusb, SISUSB_TYPE_MEM, adr, data));
|
|
}
|
|
|
|
#endif /* 0 */
|
|
|
|
int
|
|
sisusb_copy_memory(struct sisusb_usb_data *sisusb, char *src,
|
|
u32 dest, int length, size_t *bytes_written)
|
|
{
|
|
return(sisusb_write_mem_bulk(sisusb, dest, src, length, NULL, 0, bytes_written));
|
|
}
|
|
|
|
#ifdef SISUSBENDIANTEST
|
|
int
|
|
sisusb_read_memory(struct sisusb_usb_data *sisusb, char *dest,
|
|
u32 src, int length, size_t *bytes_written)
|
|
{
|
|
return(sisusb_read_mem_bulk(sisusb, src, dest, length, NULL, bytes_written));
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef SISUSBENDIANTEST
|
|
static void
|
|
sisusb_testreadwrite(struct sisusb_usb_data *sisusb)
|
|
{
|
|
static char srcbuffer[] = { 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77 };
|
|
char destbuffer[10];
|
|
size_t dummy;
|
|
int i,j;
|
|
|
|
sisusb_copy_memory(sisusb, srcbuffer, sisusb->vrambase, 7, &dummy);
|
|
|
|
for(i = 1; i <= 7; i++) {
|
|
printk(KERN_DEBUG "sisusb: rwtest %d bytes\n", i);
|
|
sisusb_read_memory(sisusb, destbuffer, sisusb->vrambase, i, &dummy);
|
|
for(j = 0; j < i; j++) {
|
|
printk(KERN_DEBUG "sisusb: rwtest read[%d] = %x\n", j, destbuffer[j]);
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* access pci config registers (reg numbers 0, 4, 8, etc) */
|
|
|
|
static int
|
|
sisusb_write_pci_config(struct sisusb_usb_data *sisusb, int regnum, u32 data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret;
|
|
|
|
packet.header = 0x008f;
|
|
packet.address = regnum | 0x10000;
|
|
packet.data = data;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sisusb_read_pci_config(struct sisusb_usb_data *sisusb, int regnum, u32 *data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret;
|
|
|
|
packet.header = 0x008f;
|
|
packet.address = (u32)regnum | 0x10000;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data;
|
|
return ret;
|
|
}
|
|
|
|
/* Clear video RAM */
|
|
|
|
static int
|
|
sisusb_clear_vram(struct sisusb_usb_data *sisusb, u32 address, int length)
|
|
{
|
|
int ret, i;
|
|
ssize_t j;
|
|
|
|
if (address < sisusb->vrambase)
|
|
return 1;
|
|
|
|
if (address >= sisusb->vrambase + sisusb->vramsize)
|
|
return 1;
|
|
|
|
if (address + length > sisusb->vrambase + sisusb->vramsize)
|
|
length = sisusb->vrambase + sisusb->vramsize - address;
|
|
|
|
if (length <= 0)
|
|
return 0;
|
|
|
|
/* allocate free buffer/urb and clear the buffer */
|
|
if ((i = sisusb_alloc_outbuf(sisusb)) < 0)
|
|
return -EBUSY;
|
|
|
|
memset(sisusb->obuf[i], 0, sisusb->obufsize);
|
|
|
|
/* We can write a length > buffer size here. The buffer
|
|
* data will simply be re-used (like a ring-buffer).
|
|
*/
|
|
ret = sisusb_write_mem_bulk(sisusb, address, NULL, length, NULL, i, &j);
|
|
|
|
/* Free the buffer/urb */
|
|
sisusb_free_outbuf(sisusb, i);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Initialize the graphics core (return 0 on success)
|
|
* This resets the graphics hardware and puts it into
|
|
* a defined mode (640x480@60Hz)
|
|
*/
|
|
|
|
#define GETREG(r,d) sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, r, d)
|
|
#define SETREG(r,d) sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, r, d)
|
|
#define SETIREG(r,i,d) sisusb_setidxreg(sisusb, r, i, d)
|
|
#define GETIREG(r,i,d) sisusb_getidxreg(sisusb, r, i, d)
|
|
#define SETIREGOR(r,i,o) sisusb_setidxregor(sisusb, r, i, o)
|
|
#define SETIREGAND(r,i,a) sisusb_setidxregand(sisusb, r, i, a)
|
|
#define SETIREGANDOR(r,i,a,o) sisusb_setidxregandor(sisusb, r, i, a, o)
|
|
#define READL(a,d) sisusb_read_memio_long(sisusb, SISUSB_TYPE_MEM, a, d)
|
|
#define WRITEL(a,d) sisusb_write_memio_long(sisusb, SISUSB_TYPE_MEM, a, d)
|
|
#define READB(a,d) sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, a, d)
|
|
#define WRITEB(a,d) sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM, a, d)
|
|
|
|
static int
|
|
sisusb_triggersr16(struct sisusb_usb_data *sisusb, u8 ramtype)
|
|
{
|
|
int ret;
|
|
u8 tmp8;
|
|
|
|
ret = GETIREG(SISSR, 0x16, &tmp8);
|
|
if (ramtype <= 1) {
|
|
tmp8 &= 0x3f;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
tmp8 |= 0x80;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
} else {
|
|
tmp8 |= 0xc0;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
tmp8 &= 0x0f;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
tmp8 |= 0x80;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
tmp8 &= 0x0f;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
tmp8 |= 0xd0;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
tmp8 &= 0x0f;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
tmp8 |= 0xa0;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sisusb_getbuswidth(struct sisusb_usb_data *sisusb, int *bw, int *chab)
|
|
{
|
|
int ret;
|
|
u8 ramtype, done = 0;
|
|
u32 t0, t1, t2, t3;
|
|
u32 ramptr = SISUSB_PCI_MEMBASE;
|
|
|
|
ret = GETIREG(SISSR, 0x3a, &ramtype);
|
|
ramtype &= 3;
|
|
|
|
ret |= SETIREG(SISSR, 0x13, 0x00);
|
|
|
|
if (ramtype <= 1) {
|
|
ret |= SETIREG(SISSR, 0x14, 0x12);
|
|
ret |= SETIREGAND(SISSR, 0x15, 0xef);
|
|
} else {
|
|
ret |= SETIREG(SISSR, 0x14, 0x02);
|
|
}
|
|
|
|
ret |= sisusb_triggersr16(sisusb, ramtype);
|
|
ret |= WRITEL(ramptr + 0, 0x01234567);
|
|
ret |= WRITEL(ramptr + 4, 0x456789ab);
|
|
ret |= WRITEL(ramptr + 8, 0x89abcdef);
|
|
ret |= WRITEL(ramptr + 12, 0xcdef0123);
|
|
ret |= WRITEL(ramptr + 16, 0x55555555);
|
|
ret |= WRITEL(ramptr + 20, 0x55555555);
|
|
ret |= WRITEL(ramptr + 24, 0xffffffff);
|
|
ret |= WRITEL(ramptr + 28, 0xffffffff);
|
|
ret |= READL(ramptr + 0, &t0);
|
|
ret |= READL(ramptr + 4, &t1);
|
|
ret |= READL(ramptr + 8, &t2);
|
|
ret |= READL(ramptr + 12, &t3);
|
|
|
|
if (ramtype <= 1) {
|
|
|
|
*chab = 0; *bw = 64;
|
|
|
|
if ((t3 != 0xcdef0123) || (t2 != 0x89abcdef)) {
|
|
if ((t1 == 0x456789ab) && (t0 == 0x01234567)) {
|
|
*chab = 0; *bw = 64;
|
|
ret |= SETIREGAND(SISSR, 0x14, 0xfd);
|
|
}
|
|
}
|
|
if ((t1 != 0x456789ab) || (t0 != 0x01234567)) {
|
|
*chab = 1; *bw = 64;
|
|
ret |= SETIREGANDOR(SISSR, 0x14, 0xfc,0x01);
|
|
|
|
ret |= sisusb_triggersr16(sisusb, ramtype);
|
|
ret |= WRITEL(ramptr + 0, 0x89abcdef);
|
|
ret |= WRITEL(ramptr + 4, 0xcdef0123);
|
|
ret |= WRITEL(ramptr + 8, 0x55555555);
|
|
ret |= WRITEL(ramptr + 12, 0x55555555);
|
|
ret |= WRITEL(ramptr + 16, 0xaaaaaaaa);
|
|
ret |= WRITEL(ramptr + 20, 0xaaaaaaaa);
|
|
ret |= READL(ramptr + 4, &t1);
|
|
|
|
if (t1 != 0xcdef0123) {
|
|
*bw = 32;
|
|
ret |= SETIREGOR(SISSR, 0x15, 0x10);
|
|
}
|
|
}
|
|
|
|
} else {
|
|
|
|
*chab = 0; *bw = 64; /* default: cha, bw = 64 */
|
|
|
|
done = 0;
|
|
|
|
if (t1 == 0x456789ab) {
|
|
if (t0 == 0x01234567) {
|
|
*chab = 0; *bw = 64;
|
|
done = 1;
|
|
}
|
|
} else {
|
|
if (t0 == 0x01234567) {
|
|
*chab = 0; *bw = 32;
|
|
ret |= SETIREG(SISSR, 0x14, 0x00);
|
|
done = 1;
|
|
}
|
|
}
|
|
|
|
if (!done) {
|
|
ret |= SETIREG(SISSR, 0x14, 0x03);
|
|
ret |= sisusb_triggersr16(sisusb, ramtype);
|
|
|
|
ret |= WRITEL(ramptr + 0, 0x01234567);
|
|
ret |= WRITEL(ramptr + 4, 0x456789ab);
|
|
ret |= WRITEL(ramptr + 8, 0x89abcdef);
|
|
ret |= WRITEL(ramptr + 12, 0xcdef0123);
|
|
ret |= WRITEL(ramptr + 16, 0x55555555);
|
|
ret |= WRITEL(ramptr + 20, 0x55555555);
|
|
ret |= WRITEL(ramptr + 24, 0xffffffff);
|
|
ret |= WRITEL(ramptr + 28, 0xffffffff);
|
|
ret |= READL(ramptr + 0, &t0);
|
|
ret |= READL(ramptr + 4, &t1);
|
|
|
|
if (t1 == 0x456789ab) {
|
|
if (t0 == 0x01234567) {
|
|
*chab = 1; *bw = 64;
|
|
return ret;
|
|
} /* else error */
|
|
} else {
|
|
if (t0 == 0x01234567) {
|
|
*chab = 1; *bw = 32;
|
|
ret |= SETIREG(SISSR, 0x14, 0x01);
|
|
} /* else error */
|
|
}
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sisusb_verify_mclk(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int ret = 0;
|
|
u32 ramptr = SISUSB_PCI_MEMBASE;
|
|
u8 tmp1, tmp2, i, j;
|
|
|
|
ret |= WRITEB(ramptr, 0xaa);
|
|
ret |= WRITEB(ramptr + 16, 0x55);
|
|
ret |= READB(ramptr, &tmp1);
|
|
ret |= READB(ramptr + 16, &tmp2);
|
|
if ((tmp1 != 0xaa) || (tmp2 != 0x55)) {
|
|
for (i = 0, j = 16; i < 2; i++, j += 16) {
|
|
ret |= GETIREG(SISSR, 0x21, &tmp1);
|
|
ret |= SETIREGAND(SISSR, 0x21, (tmp1 & 0xfb));
|
|
ret |= SETIREGOR(SISSR, 0x3c, 0x01); /* not on 330 */
|
|
ret |= SETIREGAND(SISSR, 0x3c, 0xfe); /* not on 330 */
|
|
ret |= SETIREG(SISSR, 0x21, tmp1);
|
|
ret |= WRITEB(ramptr + 16 + j, j);
|
|
ret |= READB(ramptr + 16 + j, &tmp1);
|
|
if (tmp1 == j) {
|
|
ret |= WRITEB(ramptr + j, j);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sisusb_set_rank(struct sisusb_usb_data *sisusb, int *iret, int index,
|
|
u8 rankno, u8 chab, const u8 dramtype[][5],
|
|
int bw)
|
|
{
|
|
int ret = 0, ranksize;
|
|
u8 tmp;
|
|
|
|
*iret = 0;
|
|
|
|
if ((rankno == 2) && (dramtype[index][0] == 2))
|
|
return ret;
|
|
|
|
ranksize = dramtype[index][3] / 2 * bw / 32;
|
|
|
|
if ((ranksize * rankno) > 128)
|
|
return ret;
|
|
|
|
tmp = 0;
|
|
while ((ranksize >>= 1) > 0) tmp += 0x10;
|
|
tmp |= ((rankno - 1) << 2);
|
|
tmp |= ((bw / 64) & 0x02);
|
|
tmp |= (chab & 0x01);
|
|
|
|
ret = SETIREG(SISSR, 0x14, tmp);
|
|
ret |= sisusb_triggersr16(sisusb, 0); /* sic! */
|
|
|
|
*iret = 1;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sisusb_check_rbc(struct sisusb_usb_data *sisusb, int *iret, u32 inc, int testn)
|
|
{
|
|
int ret = 0, i;
|
|
u32 j, tmp;
|
|
|
|
*iret = 0;
|
|
|
|
for (i = 0, j = 0; i < testn; i++) {
|
|
ret |= WRITEL(sisusb->vrambase + j, j);
|
|
j += inc;
|
|
}
|
|
|
|
for (i = 0, j = 0; i < testn; i++) {
|
|
ret |= READL(sisusb->vrambase + j, &tmp);
|
|
if (tmp != j) return ret;
|
|
j += inc;
|
|
}
|
|
|
|
*iret = 1;
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sisusb_check_ranks(struct sisusb_usb_data *sisusb, int *iret, int rankno,
|
|
int idx, int bw, const u8 rtype[][5])
|
|
{
|
|
int ret = 0, i, i2ret;
|
|
u32 inc;
|
|
|
|
*iret = 0;
|
|
|
|
for (i = rankno; i >= 1; i--) {
|
|
inc = 1 << (rtype[idx][2] +
|
|
rtype[idx][1] +
|
|
rtype[idx][0] +
|
|
bw / 64 + i);
|
|
ret |= sisusb_check_rbc(sisusb, &i2ret, inc, 2);
|
|
if (!i2ret)
|
|
return ret;
|
|
}
|
|
|
|
inc = 1 << (rtype[idx][2] + bw / 64 + 2);
|
|
ret |= sisusb_check_rbc(sisusb, &i2ret, inc, 4);
|
|
if (!i2ret)
|
|
return ret;
|
|
|
|
inc = 1 << (10 + bw / 64);
|
|
ret |= sisusb_check_rbc(sisusb, &i2ret, inc, 2);
|
|
if (!i2ret)
|
|
return ret;
|
|
|
|
*iret = 1;
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sisusb_get_sdram_size(struct sisusb_usb_data *sisusb, int *iret, int bw,
|
|
int chab)
|
|
{
|
|
int ret = 0, i2ret = 0, i, j;
|
|
static const u8 sdramtype[13][5] = {
|
|
{ 2, 12, 9, 64, 0x35 },
|
|
{ 1, 13, 9, 64, 0x44 },
|
|
{ 2, 12, 8, 32, 0x31 },
|
|
{ 2, 11, 9, 32, 0x25 },
|
|
{ 1, 12, 9, 32, 0x34 },
|
|
{ 1, 13, 8, 32, 0x40 },
|
|
{ 2, 11, 8, 16, 0x21 },
|
|
{ 1, 12, 8, 16, 0x30 },
|
|
{ 1, 11, 9, 16, 0x24 },
|
|
{ 1, 11, 8, 8, 0x20 },
|
|
{ 2, 9, 8, 4, 0x01 },
|
|
{ 1, 10, 8, 4, 0x10 },
|
|
{ 1, 9, 8, 2, 0x00 }
|
|
};
|
|
|
|
*iret = 1; /* error */
|
|
|
|
for (i = 0; i < 13; i++) {
|
|
ret |= SETIREGANDOR(SISSR, 0x13, 0x80, sdramtype[i][4]);
|
|
for (j = 2; j > 0; j--) {
|
|
ret |= sisusb_set_rank(sisusb, &i2ret, i, j,
|
|
chab, sdramtype, bw);
|
|
if (!i2ret)
|
|
continue;
|
|
|
|
ret |= sisusb_check_ranks(sisusb, &i2ret, j, i,
|
|
bw, sdramtype);
|
|
if (i2ret) {
|
|
*iret = 0; /* ram size found */
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sisusb_setup_screen(struct sisusb_usb_data *sisusb, int clrall, int drwfr)
|
|
{
|
|
int ret = 0;
|
|
u32 address;
|
|
int i, length, modex, modey, bpp;
|
|
|
|
modex = 640; modey = 480; bpp = 2;
|
|
|
|
address = sisusb->vrambase; /* Clear video ram */
|
|
|
|
if (clrall)
|
|
length = sisusb->vramsize;
|
|
else
|
|
length = modex * bpp * modey;
|
|
|
|
ret = sisusb_clear_vram(sisusb, address, length);
|
|
|
|
if (!ret && drwfr) {
|
|
for (i = 0; i < modex; i++) {
|
|
address = sisusb->vrambase + (i * bpp);
|
|
ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM,
|
|
address, 0xf100);
|
|
address += (modex * (modey-1) * bpp);
|
|
ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM,
|
|
address, 0xf100);
|
|
}
|
|
for (i = 0; i < modey; i++) {
|
|
address = sisusb->vrambase + ((i * modex) * bpp);
|
|
ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM,
|
|
address, 0xf100);
|
|
address += ((modex - 1) * bpp);
|
|
ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM,
|
|
address, 0xf100);
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sisusb_set_default_mode(struct sisusb_usb_data *sisusb, int touchengines)
|
|
{
|
|
int ret = 0, i, j, modex, modey, bpp, du;
|
|
u8 sr31, cr63, tmp8;
|
|
static const char attrdata[] = {
|
|
0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
|
|
0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,
|
|
0x01,0x00,0x00,0x00
|
|
};
|
|
static const char crtcrdata[] = {
|
|
0x5f,0x4f,0x50,0x82,0x54,0x80,0x0b,0x3e,
|
|
0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
|
|
0xea,0x8c,0xdf,0x28,0x40,0xe7,0x04,0xa3,
|
|
0xff
|
|
};
|
|
static const char grcdata[] = {
|
|
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,
|
|
0xff
|
|
};
|
|
static const char crtcdata[] = {
|
|
0x5f,0x4f,0x4f,0x83,0x55,0x81,0x0b,0x3e,
|
|
0xe9,0x8b,0xdf,0xe8,0x0c,0x00,0x00,0x05,
|
|
0x00
|
|
};
|
|
|
|
modex = 640; modey = 480; bpp = 2;
|
|
|
|
GETIREG(SISSR, 0x31, &sr31);
|
|
GETIREG(SISCR, 0x63, &cr63);
|
|
SETIREGOR(SISSR, 0x01, 0x20);
|
|
SETIREG(SISCR, 0x63, cr63 & 0xbf);
|
|
SETIREGOR(SISCR, 0x17, 0x80);
|
|
SETIREGOR(SISSR, 0x1f, 0x04);
|
|
SETIREGAND(SISSR, 0x07, 0xfb);
|
|
SETIREG(SISSR, 0x00, 0x03); /* seq */
|
|
SETIREG(SISSR, 0x01, 0x21);
|
|
SETIREG(SISSR, 0x02, 0x0f);
|
|
SETIREG(SISSR, 0x03, 0x00);
|
|
SETIREG(SISSR, 0x04, 0x0e);
|
|
SETREG(SISMISCW, 0x23); /* misc */
|
|
for (i = 0; i <= 0x18; i++) { /* crtc */
|
|
SETIREG(SISCR, i, crtcrdata[i]);
|
|
}
|
|
for (i = 0; i <= 0x13; i++) { /* att */
|
|
GETREG(SISINPSTAT, &tmp8);
|
|
SETREG(SISAR, i);
|
|
SETREG(SISAR, attrdata[i]);
|
|
}
|
|
GETREG(SISINPSTAT, &tmp8);
|
|
SETREG(SISAR, 0x14);
|
|
SETREG(SISAR, 0x00);
|
|
GETREG(SISINPSTAT, &tmp8);
|
|
SETREG(SISAR, 0x20);
|
|
GETREG(SISINPSTAT, &tmp8);
|
|
for (i = 0; i <= 0x08; i++) { /* grc */
|
|
SETIREG(SISGR, i, grcdata[i]);
|
|
}
|
|
SETIREGAND(SISGR, 0x05, 0xbf);
|
|
for (i = 0x0A; i <= 0x0E; i++) { /* clr ext */
|
|
SETIREG(SISSR, i, 0x00);
|
|
}
|
|
SETIREGAND(SISSR, 0x37, 0xfe);
|
|
SETREG(SISMISCW, 0xef); /* sync */
|
|
SETIREG(SISCR, 0x11, 0x00); /* crtc */
|
|
for (j = 0x00, i = 0; i <= 7; i++, j++) {
|
|
SETIREG(SISCR, j, crtcdata[i]);
|
|
}
|
|
for (j = 0x10; i <= 10; i++, j++) {
|
|
SETIREG(SISCR, j, crtcdata[i]);
|
|
}
|
|
for (j = 0x15; i <= 12; i++, j++) {
|
|
SETIREG(SISCR, j, crtcdata[i]);
|
|
}
|
|
for (j = 0x0A; i <= 15; i++, j++) {
|
|
SETIREG(SISSR, j, crtcdata[i]);
|
|
}
|
|
SETIREG(SISSR, 0x0E, (crtcdata[16] & 0xE0));
|
|
SETIREGANDOR(SISCR, 0x09, 0x5f, ((crtcdata[16] & 0x01) << 5));
|
|
SETIREG(SISCR, 0x14, 0x4f);
|
|
du = (modex / 16) * (bpp * 2); /* offset/pitch */
|
|
if (modex % 16) du += bpp;
|
|
SETIREGANDOR(SISSR, 0x0e, 0xf0, ((du >> 8) & 0x0f));
|
|
SETIREG(SISCR, 0x13, (du & 0xff));
|
|
du <<= 5;
|
|
tmp8 = du >> 8;
|
|
if (du & 0xff) tmp8++;
|
|
SETIREG(SISSR, 0x10, tmp8);
|
|
SETIREG(SISSR, 0x31, 0x00); /* VCLK */
|
|
SETIREG(SISSR, 0x2b, 0x1b);
|
|
SETIREG(SISSR, 0x2c, 0xe1);
|
|
SETIREG(SISSR, 0x2d, 0x01);
|
|
SETIREGAND(SISSR, 0x3d, 0xfe); /* FIFO */
|
|
SETIREG(SISSR, 0x08, 0xae);
|
|
SETIREGAND(SISSR, 0x09, 0xf0);
|
|
SETIREG(SISSR, 0x08, 0x34);
|
|
SETIREGOR(SISSR, 0x3d, 0x01);
|
|
SETIREGAND(SISSR, 0x1f, 0x3f); /* mode regs */
|
|
SETIREGANDOR(SISSR, 0x06, 0xc0, 0x0a);
|
|
SETIREG(SISCR, 0x19, 0x00);
|
|
SETIREGAND(SISCR, 0x1a, 0xfc);
|
|
SETIREGAND(SISSR, 0x0f, 0xb7);
|
|
SETIREGAND(SISSR, 0x31, 0xfb);
|
|
SETIREGANDOR(SISSR, 0x21, 0x1f, 0xa0);
|
|
SETIREGAND(SISSR, 0x32, 0xf3);
|
|
SETIREGANDOR(SISSR, 0x07, 0xf8, 0x03);
|
|
SETIREG(SISCR, 0x52, 0x6c);
|
|
|
|
SETIREG(SISCR, 0x0d, 0x00); /* adjust frame */
|
|
SETIREG(SISCR, 0x0c, 0x00);
|
|
SETIREG(SISSR, 0x0d, 0x00);
|
|
SETIREGAND(SISSR, 0x37, 0xfe);
|
|
|
|
SETIREG(SISCR, 0x32, 0x20);
|
|
SETIREGAND(SISSR, 0x01, 0xdf); /* enable display */
|
|
SETIREG(SISCR, 0x63, (cr63 & 0xbf));
|
|
SETIREG(SISSR, 0x31, (sr31 & 0xfb));
|
|
|
|
if (touchengines) {
|
|
SETIREG(SISSR, 0x20, 0xa1); /* enable engines */
|
|
SETIREGOR(SISSR, 0x1e, 0x5a);
|
|
|
|
SETIREG(SISSR, 0x26, 0x01); /* disable cmdqueue */
|
|
SETIREG(SISSR, 0x27, 0x1f);
|
|
SETIREG(SISSR, 0x26, 0x00);
|
|
}
|
|
|
|
SETIREG(SISCR, 0x34, 0x44); /* we just set std mode #44 */
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sisusb_init_gfxcore(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int ret = 0, i, j, bw, chab, iret, retry = 3;
|
|
u8 tmp8, ramtype;
|
|
u32 tmp32;
|
|
static const char mclktable[] = {
|
|
0x3b, 0x22, 0x01, 143,
|
|
0x3b, 0x22, 0x01, 143,
|
|
0x3b, 0x22, 0x01, 143,
|
|
0x3b, 0x22, 0x01, 143
|
|
};
|
|
static const char eclktable[] = {
|
|
0x3b, 0x22, 0x01, 143,
|
|
0x3b, 0x22, 0x01, 143,
|
|
0x3b, 0x22, 0x01, 143,
|
|
0x3b, 0x22, 0x01, 143
|
|
};
|
|
static const char ramtypetable1[] = {
|
|
0x00, 0x04, 0x60, 0x60,
|
|
0x0f, 0x0f, 0x1f, 0x1f,
|
|
0xba, 0xba, 0xba, 0xba,
|
|
0xa9, 0xa9, 0xac, 0xac,
|
|
0xa0, 0xa0, 0xa0, 0xa8,
|
|
0x00, 0x00, 0x02, 0x02,
|
|
0x30, 0x30, 0x40, 0x40
|
|
};
|
|
static const char ramtypetable2[] = {
|
|
0x77, 0x77, 0x44, 0x44,
|
|
0x77, 0x77, 0x44, 0x44,
|
|
0x00, 0x00, 0x00, 0x00,
|
|
0x5b, 0x5b, 0xab, 0xab,
|
|
0x00, 0x00, 0xf0, 0xf8
|
|
};
|
|
|
|
while (retry--) {
|
|
|
|
/* Enable VGA */
|
|
ret = GETREG(SISVGAEN, &tmp8);
|
|
ret |= SETREG(SISVGAEN, (tmp8 | 0x01));
|
|
|
|
/* Enable GPU access to VRAM */
|
|
ret |= GETREG(SISMISCR, &tmp8);
|
|
ret |= SETREG(SISMISCW, (tmp8 | 0x01));
|
|
|
|
if (ret) continue;
|
|
|
|
/* Reset registers */
|
|
ret |= SETIREGAND(SISCR, 0x5b, 0xdf);
|
|
ret |= SETIREG(SISSR, 0x05, 0x86);
|
|
ret |= SETIREGOR(SISSR, 0x20, 0x01);
|
|
|
|
ret |= SETREG(SISMISCW, 0x67);
|
|
|
|
for (i = 0x06; i <= 0x1f; i++) {
|
|
ret |= SETIREG(SISSR, i, 0x00);
|
|
}
|
|
for (i = 0x21; i <= 0x27; i++) {
|
|
ret |= SETIREG(SISSR, i, 0x00);
|
|
}
|
|
for (i = 0x31; i <= 0x3d; i++) {
|
|
ret |= SETIREG(SISSR, i, 0x00);
|
|
}
|
|
for (i = 0x12; i <= 0x1b; i++) {
|
|
ret |= SETIREG(SISSR, i, 0x00);
|
|
}
|
|
for (i = 0x79; i <= 0x7c; i++) {
|
|
ret |= SETIREG(SISCR, i, 0x00);
|
|
}
|
|
|
|
if (ret) continue;
|
|
|
|
ret |= SETIREG(SISCR, 0x63, 0x80);
|
|
|
|
ret |= GETIREG(SISSR, 0x3a, &ramtype);
|
|
ramtype &= 0x03;
|
|
|
|
ret |= SETIREG(SISSR, 0x28, mclktable[ramtype * 4]);
|
|
ret |= SETIREG(SISSR, 0x29, mclktable[(ramtype * 4) + 1]);
|
|
ret |= SETIREG(SISSR, 0x2a, mclktable[(ramtype * 4) + 2]);
|
|
|
|
ret |= SETIREG(SISSR, 0x2e, eclktable[ramtype * 4]);
|
|
ret |= SETIREG(SISSR, 0x2f, eclktable[(ramtype * 4) + 1]);
|
|
ret |= SETIREG(SISSR, 0x30, eclktable[(ramtype * 4) + 2]);
|
|
|
|
ret |= SETIREG(SISSR, 0x07, 0x18);
|
|
ret |= SETIREG(SISSR, 0x11, 0x0f);
|
|
|
|
if (ret) continue;
|
|
|
|
for (i = 0x15, j = 0; i <= 0x1b; i++, j++) {
|
|
ret |= SETIREG(SISSR, i, ramtypetable1[(j*4) + ramtype]);
|
|
}
|
|
for (i = 0x40, j = 0; i <= 0x44; i++, j++) {
|
|
ret |= SETIREG(SISCR, i, ramtypetable2[(j*4) + ramtype]);
|
|
}
|
|
|
|
ret |= SETIREG(SISCR, 0x49, 0xaa);
|
|
|
|
ret |= SETIREG(SISSR, 0x1f, 0x00);
|
|
ret |= SETIREG(SISSR, 0x20, 0xa0);
|
|
ret |= SETIREG(SISSR, 0x23, 0xf6);
|
|
ret |= SETIREG(SISSR, 0x24, 0x0d);
|
|
ret |= SETIREG(SISSR, 0x25, 0x33);
|
|
|
|
ret |= SETIREG(SISSR, 0x11, 0x0f);
|
|
|
|
ret |= SETIREGOR(SISPART1, 0x2f, 0x01);
|
|
|
|
ret |= SETIREGAND(SISCAP, 0x3f, 0xef);
|
|
|
|
if (ret) continue;
|
|
|
|
ret |= SETIREG(SISPART1, 0x00, 0x00);
|
|
|
|
ret |= GETIREG(SISSR, 0x13, &tmp8);
|
|
tmp8 >>= 4;
|
|
|
|
ret |= SETIREG(SISPART1, 0x02, 0x00);
|
|
ret |= SETIREG(SISPART1, 0x2e, 0x08);
|
|
|
|
ret |= sisusb_read_pci_config(sisusb, 0x50, &tmp32);
|
|
tmp32 &= 0x00f00000;
|
|
tmp8 = (tmp32 == 0x100000) ? 0x33 : 0x03;
|
|
ret |= SETIREG(SISSR, 0x25, tmp8);
|
|
tmp8 = (tmp32 == 0x100000) ? 0xaa : 0x88;
|
|
ret |= SETIREG(SISCR, 0x49, tmp8);
|
|
|
|
ret |= SETIREG(SISSR, 0x27, 0x1f);
|
|
ret |= SETIREG(SISSR, 0x31, 0x00);
|
|
ret |= SETIREG(SISSR, 0x32, 0x11);
|
|
ret |= SETIREG(SISSR, 0x33, 0x00);
|
|
|
|
if (ret) continue;
|
|
|
|
ret |= SETIREG(SISCR, 0x83, 0x00);
|
|
|
|
ret |= sisusb_set_default_mode(sisusb, 0);
|
|
|
|
ret |= SETIREGAND(SISSR, 0x21, 0xdf);
|
|
ret |= SETIREGOR(SISSR, 0x01, 0x20);
|
|
ret |= SETIREGOR(SISSR, 0x16, 0x0f);
|
|
|
|
ret |= sisusb_triggersr16(sisusb, ramtype);
|
|
|
|
/* Disable refresh */
|
|
ret |= SETIREGAND(SISSR, 0x17, 0xf8);
|
|
ret |= SETIREGOR(SISSR, 0x19, 0x03);
|
|
|
|
ret |= sisusb_getbuswidth(sisusb, &bw, &chab);
|
|
ret |= sisusb_verify_mclk(sisusb);
|
|
|
|
if (ramtype <= 1) {
|
|
ret |= sisusb_get_sdram_size(sisusb, &iret, bw, chab);
|
|
if (iret) {
|
|
printk(KERN_ERR "sisusbvga[%d]: RAM size "
|
|
"detection failed, "
|
|
"assuming 8MB video RAM\n",
|
|
sisusb->minor);
|
|
ret |= SETIREG(SISSR,0x14,0x31);
|
|
/* TODO */
|
|
}
|
|
} else {
|
|
printk(KERN_ERR "sisusbvga[%d]: DDR RAM device found, "
|
|
"assuming 8MB video RAM\n",
|
|
sisusb->minor);
|
|
ret |= SETIREG(SISSR,0x14,0x31);
|
|
/* *** TODO *** */
|
|
}
|
|
|
|
/* Enable refresh */
|
|
ret |= SETIREG(SISSR, 0x16, ramtypetable1[4 + ramtype]);
|
|
ret |= SETIREG(SISSR, 0x17, ramtypetable1[8 + ramtype]);
|
|
ret |= SETIREG(SISSR, 0x19, ramtypetable1[16 + ramtype]);
|
|
|
|
ret |= SETIREGOR(SISSR, 0x21, 0x20);
|
|
|
|
ret |= SETIREG(SISSR, 0x22, 0xfb);
|
|
ret |= SETIREG(SISSR, 0x21, 0xa5);
|
|
|
|
if (ret == 0)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#undef SETREG
|
|
#undef GETREG
|
|
#undef SETIREG
|
|
#undef GETIREG
|
|
#undef SETIREGOR
|
|
#undef SETIREGAND
|
|
#undef SETIREGANDOR
|
|
#undef READL
|
|
#undef WRITEL
|
|
|
|
static void
|
|
sisusb_get_ramconfig(struct sisusb_usb_data *sisusb)
|
|
{
|
|
u8 tmp8, tmp82, ramtype;
|
|
int bw = 0;
|
|
char *ramtypetext1 = NULL;
|
|
const char *ramtypetext2[] = { "SDR SDRAM", "SDR SGRAM",
|
|
"DDR SDRAM", "DDR SGRAM" };
|
|
static const int busSDR[4] = {64, 64, 128, 128};
|
|
static const int busDDR[4] = {32, 32, 64, 64};
|
|
static const int busDDRA[4] = {64+32, 64+32 , (64+32)*2, (64+32)*2};
|
|
|
|
sisusb_getidxreg(sisusb, SISSR, 0x14, &tmp8);
|
|
sisusb_getidxreg(sisusb, SISSR, 0x15, &tmp82);
|
|
sisusb_getidxreg(sisusb, SISSR, 0x3a, &ramtype);
|
|
sisusb->vramsize = (1 << ((tmp8 & 0xf0) >> 4)) * 1024 * 1024;
|
|
ramtype &= 0x03;
|
|
switch ((tmp8 >> 2) & 0x03) {
|
|
case 0: ramtypetext1 = "1 ch/1 r";
|
|
if (tmp82 & 0x10) {
|
|
bw = 32;
|
|
} else {
|
|
bw = busSDR[(tmp8 & 0x03)];
|
|
}
|
|
break;
|
|
case 1: ramtypetext1 = "1 ch/2 r";
|
|
sisusb->vramsize <<= 1;
|
|
bw = busSDR[(tmp8 & 0x03)];
|
|
break;
|
|
case 2: ramtypetext1 = "asymmeric";
|
|
sisusb->vramsize += sisusb->vramsize/2;
|
|
bw = busDDRA[(tmp8 & 0x03)];
|
|
break;
|
|
case 3: ramtypetext1 = "2 channel";
|
|
sisusb->vramsize <<= 1;
|
|
bw = busDDR[(tmp8 & 0x03)];
|
|
break;
|
|
}
|
|
|
|
printk(KERN_INFO "sisusbvga[%d]: %dMB %s %s, bus width %d\n",
|
|
sisusb->minor, (sisusb->vramsize >> 20), ramtypetext1,
|
|
ramtypetext2[ramtype], bw);
|
|
}
|
|
|
|
static int
|
|
sisusb_do_init_gfxdevice(struct sisusb_usb_data *sisusb)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret;
|
|
u32 tmp32;
|
|
|
|
/* Do some magic */
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000324;
|
|
packet.data = 0x00000004;
|
|
ret = sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
|
|
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000364;
|
|
packet.data = 0x00000004;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
|
|
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000384;
|
|
packet.data = 0x00000004;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
|
|
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000100;
|
|
packet.data = 0x00000700;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
|
|
|
|
packet.header = 0x000f;
|
|
packet.address = 0x00000004;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 6, &packet, 0);
|
|
packet.data |= 0x17;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
|
|
|
|
/* Init BAR 0 (VRAM) */
|
|
ret |= sisusb_read_pci_config(sisusb, 0x10, &tmp32);
|
|
ret |= sisusb_write_pci_config(sisusb, 0x10, 0xfffffff0);
|
|
ret |= sisusb_read_pci_config(sisusb, 0x10, &tmp32);
|
|
tmp32 &= 0x0f;
|
|
tmp32 |= SISUSB_PCI_MEMBASE;
|
|
ret |= sisusb_write_pci_config(sisusb, 0x10, tmp32);
|
|
|
|
/* Init BAR 1 (MMIO) */
|
|
ret |= sisusb_read_pci_config(sisusb, 0x14, &tmp32);
|
|
ret |= sisusb_write_pci_config(sisusb, 0x14, 0xfffffff0);
|
|
ret |= sisusb_read_pci_config(sisusb, 0x14, &tmp32);
|
|
tmp32 &= 0x0f;
|
|
tmp32 |= SISUSB_PCI_MMIOBASE;
|
|
ret |= sisusb_write_pci_config(sisusb, 0x14, tmp32);
|
|
|
|
/* Init BAR 2 (i/o ports) */
|
|
ret |= sisusb_read_pci_config(sisusb, 0x18, &tmp32);
|
|
ret |= sisusb_write_pci_config(sisusb, 0x18, 0xfffffff0);
|
|
ret |= sisusb_read_pci_config(sisusb, 0x18, &tmp32);
|
|
tmp32 &= 0x0f;
|
|
tmp32 |= SISUSB_PCI_IOPORTBASE;
|
|
ret |= sisusb_write_pci_config(sisusb, 0x18, tmp32);
|
|
|
|
/* Enable memory and i/o access */
|
|
ret |= sisusb_read_pci_config(sisusb, 0x04, &tmp32);
|
|
tmp32 |= 0x3;
|
|
ret |= sisusb_write_pci_config(sisusb, 0x04, tmp32);
|
|
|
|
if (ret == 0) {
|
|
/* Some further magic */
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000050;
|
|
packet.data = 0x000000ff;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Initialize the graphics device (return 0 on success)
|
|
* This initializes the net2280 as well as the PCI registers
|
|
* of the graphics board.
|
|
*/
|
|
|
|
static int
|
|
sisusb_init_gfxdevice(struct sisusb_usb_data *sisusb, int initscreen)
|
|
{
|
|
int ret = 0, test = 0;
|
|
u32 tmp32;
|
|
|
|
if (sisusb->devinit == 1) {
|
|
/* Read PCI BARs and see if they have been set up */
|
|
ret |= sisusb_read_pci_config(sisusb, 0x10, &tmp32);
|
|
if (ret) return ret;
|
|
if ((tmp32 & 0xfffffff0) == SISUSB_PCI_MEMBASE) test++;
|
|
|
|
ret |= sisusb_read_pci_config(sisusb, 0x14, &tmp32);
|
|
if (ret) return ret;
|
|
if ((tmp32 & 0xfffffff0) == SISUSB_PCI_MMIOBASE) test++;
|
|
|
|
ret |= sisusb_read_pci_config(sisusb, 0x18, &tmp32);
|
|
if (ret) return ret;
|
|
if ((tmp32 & 0xfffffff0) == SISUSB_PCI_IOPORTBASE) test++;
|
|
}
|
|
|
|
/* No? So reset the device */
|
|
if ((sisusb->devinit == 0) || (test != 3)) {
|
|
|
|
ret |= sisusb_do_init_gfxdevice(sisusb);
|
|
|
|
if (ret == 0)
|
|
sisusb->devinit = 1;
|
|
|
|
}
|
|
|
|
if (sisusb->devinit) {
|
|
/* Initialize the graphics core */
|
|
if (sisusb_init_gfxcore(sisusb) == 0) {
|
|
sisusb->gfxinit = 1;
|
|
sisusb_get_ramconfig(sisusb);
|
|
ret |= sisusb_set_default_mode(sisusb, 1);
|
|
ret |= sisusb_setup_screen(sisusb, 1, initscreen);
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
|
|
/* Set up default text mode:
|
|
- Set text mode (0x03)
|
|
- Upload default font
|
|
- Upload user font (if available)
|
|
*/
|
|
|
|
int
|
|
sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init)
|
|
{
|
|
int ret = 0, slot = sisusb->font_slot, i;
|
|
const struct font_desc *myfont;
|
|
u8 *tempbuf;
|
|
u16 *tempbufb;
|
|
size_t written;
|
|
static const char bootstring[] = "SiSUSB VGA text console, (C) 2005 Thomas Winischhofer.";
|
|
static const char bootlogo[] = "(o_ //\\ V_/_";
|
|
|
|
/* sisusb->lock is down */
|
|
|
|
if (!sisusb->SiS_Pr)
|
|
return 1;
|
|
|
|
sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30;
|
|
sisusb->SiS_Pr->sisusb = (void *)sisusb;
|
|
|
|
/* Set mode 0x03 */
|
|
SiSUSBSetMode(sisusb->SiS_Pr, 0x03);
|
|
|
|
if (!(myfont = find_font("VGA8x16")))
|
|
return 1;
|
|
|
|
if (!(tempbuf = vmalloc(8192)))
|
|
return 1;
|
|
|
|
for (i = 0; i < 256; i++)
|
|
memcpy(tempbuf + (i * 32), myfont->data + (i * 16), 16);
|
|
|
|
/* Upload default font */
|
|
ret = sisusbcon_do_font_op(sisusb, 1, 0, tempbuf, 8192, 0, 1, NULL, 16, 0);
|
|
|
|
vfree(tempbuf);
|
|
|
|
/* Upload user font (and reset current slot) */
|
|
if (sisusb->font_backup) {
|
|
ret |= sisusbcon_do_font_op(sisusb, 1, 2, sisusb->font_backup,
|
|
8192, sisusb->font_backup_512, 1, NULL,
|
|
sisusb->font_backup_height, 0);
|
|
if (slot != 2)
|
|
sisusbcon_do_font_op(sisusb, 1, 0, NULL, 0, 0, 1,
|
|
NULL, 16, 0);
|
|
}
|
|
|
|
if (init && !sisusb->scrbuf) {
|
|
|
|
if ((tempbuf = vmalloc(8192))) {
|
|
|
|
i = 4096;
|
|
tempbufb = (u16 *)tempbuf;
|
|
while (i--)
|
|
*(tempbufb++) = 0x0720;
|
|
|
|
i = 0;
|
|
tempbufb = (u16 *)tempbuf;
|
|
while (bootlogo[i]) {
|
|
*(tempbufb++) = 0x0700 | bootlogo[i++];
|
|
if (!(i % 4))
|
|
tempbufb += 76;
|
|
}
|
|
|
|
i = 0;
|
|
tempbufb = (u16 *)tempbuf + 6;
|
|
while (bootstring[i])
|
|
*(tempbufb++) = 0x0700 | bootstring[i++];
|
|
|
|
ret |= sisusb_copy_memory(sisusb, tempbuf,
|
|
sisusb->vrambase, 8192, &written);
|
|
|
|
vfree(tempbuf);
|
|
|
|
}
|
|
|
|
} else if (sisusb->scrbuf) {
|
|
|
|
ret |= sisusb_copy_memory(sisusb, (char *)sisusb->scrbuf,
|
|
sisusb->vrambase, sisusb->scrbuf_size, &written);
|
|
|
|
}
|
|
|
|
if (sisusb->sisusb_cursor_size_from >= 0 &&
|
|
sisusb->sisusb_cursor_size_to >= 0) {
|
|
sisusb_setidxreg(sisusb, SISCR, 0x0a,
|
|
sisusb->sisusb_cursor_size_from);
|
|
sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0xe0,
|
|
sisusb->sisusb_cursor_size_to);
|
|
} else {
|
|
sisusb_setidxreg(sisusb, SISCR, 0x0a, 0x2d);
|
|
sisusb_setidxreg(sisusb, SISCR, 0x0b, 0x0e);
|
|
sisusb->sisusb_cursor_size_to = -1;
|
|
}
|
|
|
|
slot = sisusb->sisusb_cursor_loc;
|
|
if(slot < 0) slot = 0;
|
|
|
|
sisusb->sisusb_cursor_loc = -1;
|
|
sisusb->bad_cursor_pos = 1;
|
|
|
|
sisusb_set_cursor(sisusb, slot);
|
|
|
|
sisusb_setidxreg(sisusb, SISCR, 0x0c, (sisusb->cur_start_addr >> 8));
|
|
sisusb_setidxreg(sisusb, SISCR, 0x0d, (sisusb->cur_start_addr & 0xff));
|
|
|
|
sisusb->textmodedestroyed = 0;
|
|
|
|
/* sisusb->lock is down */
|
|
|
|
return ret;
|
|
}
|
|
|
|
#endif
|
|
|
|
/* fops */
|
|
|
|
static int
|
|
sisusb_open(struct inode *inode, struct file *file)
|
|
{
|
|
struct sisusb_usb_data *sisusb;
|
|
struct usb_interface *interface;
|
|
int subminor = iminor(inode);
|
|
|
|
mutex_lock(&disconnect_mutex);
|
|
|
|
if (!(interface = usb_find_interface(&sisusb_driver, subminor))) {
|
|
printk(KERN_ERR "sisusb[%d]: Failed to find interface\n",
|
|
subminor);
|
|
mutex_unlock(&disconnect_mutex);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!(sisusb = usb_get_intfdata(interface))) {
|
|
mutex_unlock(&disconnect_mutex);
|
|
return -ENODEV;
|
|
}
|
|
|
|
mutex_lock(&sisusb->lock);
|
|
|
|
if (!sisusb->present || !sisusb->ready) {
|
|
mutex_unlock(&sisusb->lock);
|
|
mutex_unlock(&disconnect_mutex);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (sisusb->isopen) {
|
|
mutex_unlock(&sisusb->lock);
|
|
mutex_unlock(&disconnect_mutex);
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (!sisusb->devinit) {
|
|
if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH) {
|
|
if (sisusb_init_gfxdevice(sisusb, 0)) {
|
|
mutex_unlock(&sisusb->lock);
|
|
mutex_unlock(&disconnect_mutex);
|
|
printk(KERN_ERR
|
|
"sisusbvga[%d]: Failed to initialize "
|
|
"device\n",
|
|
sisusb->minor);
|
|
return -EIO;
|
|
}
|
|
} else {
|
|
mutex_unlock(&sisusb->lock);
|
|
mutex_unlock(&disconnect_mutex);
|
|
printk(KERN_ERR
|
|
"sisusbvga[%d]: Device not attached to "
|
|
"USB 2.0 hub\n",
|
|
sisusb->minor);
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
/* Increment usage count for our sisusb */
|
|
kref_get(&sisusb->kref);
|
|
|
|
sisusb->isopen = 1;
|
|
|
|
file->private_data = sisusb;
|
|
|
|
mutex_unlock(&sisusb->lock);
|
|
|
|
mutex_unlock(&disconnect_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
sisusb_delete(struct kref *kref)
|
|
{
|
|
struct sisusb_usb_data *sisusb = to_sisusb_dev(kref);
|
|
|
|
if (!sisusb)
|
|
return;
|
|
|
|
if (sisusb->sisusb_dev)
|
|
usb_put_dev(sisusb->sisusb_dev);
|
|
|
|
sisusb->sisusb_dev = NULL;
|
|
sisusb_free_buffers(sisusb);
|
|
sisusb_free_urbs(sisusb);
|
|
#ifdef INCL_SISUSB_CON
|
|
kfree(sisusb->SiS_Pr);
|
|
#endif
|
|
kfree(sisusb);
|
|
}
|
|
|
|
static int
|
|
sisusb_release(struct inode *inode, struct file *file)
|
|
{
|
|
struct sisusb_usb_data *sisusb;
|
|
int myminor;
|
|
|
|
mutex_lock(&disconnect_mutex);
|
|
|
|
if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) {
|
|
mutex_unlock(&disconnect_mutex);
|
|
return -ENODEV;
|
|
}
|
|
|
|
mutex_lock(&sisusb->lock);
|
|
|
|
if (sisusb->present) {
|
|
/* Wait for all URBs to finish if device still present */
|
|
if (!sisusb_wait_all_out_complete(sisusb))
|
|
sisusb_kill_all_busy(sisusb);
|
|
}
|
|
|
|
myminor = sisusb->minor;
|
|
|
|
sisusb->isopen = 0;
|
|
file->private_data = NULL;
|
|
|
|
mutex_unlock(&sisusb->lock);
|
|
|
|
/* decrement the usage count on our device */
|
|
kref_put(&sisusb->kref, sisusb_delete);
|
|
|
|
mutex_unlock(&disconnect_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t
|
|
sisusb_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
|
|
{
|
|
struct sisusb_usb_data *sisusb;
|
|
ssize_t bytes_read = 0;
|
|
int errno = 0;
|
|
u8 buf8;
|
|
u16 buf16;
|
|
u32 buf32, address;
|
|
|
|
if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
|
|
return -ENODEV;
|
|
|
|
mutex_lock(&sisusb->lock);
|
|
|
|
/* Sanity check */
|
|
if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) {
|
|
mutex_unlock(&sisusb->lock);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if ((*ppos) >= SISUSB_PCI_PSEUDO_IOPORTBASE &&
|
|
(*ppos) < SISUSB_PCI_PSEUDO_IOPORTBASE + 128) {
|
|
|
|
address = (*ppos) -
|
|
SISUSB_PCI_PSEUDO_IOPORTBASE +
|
|
SISUSB_PCI_IOPORTBASE;
|
|
|
|
/* Read i/o ports
|
|
* Byte, word and long(32) can be read. As this
|
|
* emulates inX instructions, the data returned is
|
|
* in machine-endianness.
|
|
*/
|
|
switch (count) {
|
|
|
|
case 1:
|
|
if (sisusb_read_memio_byte(sisusb,
|
|
SISUSB_TYPE_IO,
|
|
address, &buf8))
|
|
errno = -EIO;
|
|
else if (put_user(buf8, (u8 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else
|
|
bytes_read = 1;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
if (sisusb_read_memio_word(sisusb,
|
|
SISUSB_TYPE_IO,
|
|
address, &buf16))
|
|
errno = -EIO;
|
|
else if (put_user(buf16, (u16 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else
|
|
bytes_read = 2;
|
|
|
|
break;
|
|
|
|
case 4:
|
|
if (sisusb_read_memio_long(sisusb,
|
|
SISUSB_TYPE_IO,
|
|
address, &buf32))
|
|
errno = -EIO;
|
|
else if (put_user(buf32, (u32 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else
|
|
bytes_read = 4;
|
|
|
|
break;
|
|
|
|
default:
|
|
errno = -EIO;
|
|
|
|
}
|
|
|
|
} else if ((*ppos) >= SISUSB_PCI_PSEUDO_MEMBASE &&
|
|
(*ppos) < SISUSB_PCI_PSEUDO_MEMBASE + sisusb->vramsize) {
|
|
|
|
address = (*ppos) -
|
|
SISUSB_PCI_PSEUDO_MEMBASE +
|
|
SISUSB_PCI_MEMBASE;
|
|
|
|
/* Read video ram
|
|
* Remember: Data delivered is never endian-corrected
|
|
*/
|
|
errno = sisusb_read_mem_bulk(sisusb, address,
|
|
NULL, count, buffer, &bytes_read);
|
|
|
|
if (bytes_read)
|
|
errno = bytes_read;
|
|
|
|
} else if ((*ppos) >= SISUSB_PCI_PSEUDO_MMIOBASE &&
|
|
(*ppos) < SISUSB_PCI_PSEUDO_MMIOBASE + SISUSB_PCI_MMIOSIZE) {
|
|
|
|
address = (*ppos) -
|
|
SISUSB_PCI_PSEUDO_MMIOBASE +
|
|
SISUSB_PCI_MMIOBASE;
|
|
|
|
/* Read MMIO
|
|
* Remember: Data delivered is never endian-corrected
|
|
*/
|
|
errno = sisusb_read_mem_bulk(sisusb, address,
|
|
NULL, count, buffer, &bytes_read);
|
|
|
|
if (bytes_read)
|
|
errno = bytes_read;
|
|
|
|
} else if ((*ppos) >= SISUSB_PCI_PSEUDO_PCIBASE &&
|
|
(*ppos) <= SISUSB_PCI_PSEUDO_PCIBASE + 0x5c) {
|
|
|
|
if (count != 4) {
|
|
mutex_unlock(&sisusb->lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
address = (*ppos) - SISUSB_PCI_PSEUDO_PCIBASE;
|
|
|
|
/* Read PCI config register
|
|
* Return value delivered in machine endianness.
|
|
*/
|
|
if (sisusb_read_pci_config(sisusb, address, &buf32))
|
|
errno = -EIO;
|
|
else if (put_user(buf32, (u32 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else
|
|
bytes_read = 4;
|
|
|
|
} else {
|
|
|
|
errno = -EBADFD;
|
|
|
|
}
|
|
|
|
(*ppos) += bytes_read;
|
|
|
|
mutex_unlock(&sisusb->lock);
|
|
|
|
return errno ? errno : bytes_read;
|
|
}
|
|
|
|
static ssize_t
|
|
sisusb_write(struct file *file, const char __user *buffer, size_t count,
|
|
loff_t *ppos)
|
|
{
|
|
struct sisusb_usb_data *sisusb;
|
|
int errno = 0;
|
|
ssize_t bytes_written = 0;
|
|
u8 buf8;
|
|
u16 buf16;
|
|
u32 buf32, address;
|
|
|
|
if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
|
|
return -ENODEV;
|
|
|
|
mutex_lock(&sisusb->lock);
|
|
|
|
/* Sanity check */
|
|
if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) {
|
|
mutex_unlock(&sisusb->lock);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if ((*ppos) >= SISUSB_PCI_PSEUDO_IOPORTBASE &&
|
|
(*ppos) < SISUSB_PCI_PSEUDO_IOPORTBASE + 128) {
|
|
|
|
address = (*ppos) -
|
|
SISUSB_PCI_PSEUDO_IOPORTBASE +
|
|
SISUSB_PCI_IOPORTBASE;
|
|
|
|
/* Write i/o ports
|
|
* Byte, word and long(32) can be written. As this
|
|
* emulates outX instructions, the data is expected
|
|
* in machine-endianness.
|
|
*/
|
|
switch (count) {
|
|
|
|
case 1:
|
|
if (get_user(buf8, (u8 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else if (sisusb_write_memio_byte(sisusb,
|
|
SISUSB_TYPE_IO,
|
|
address, buf8))
|
|
errno = -EIO;
|
|
else
|
|
bytes_written = 1;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
if (get_user(buf16, (u16 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else if (sisusb_write_memio_word(sisusb,
|
|
SISUSB_TYPE_IO,
|
|
address, buf16))
|
|
errno = -EIO;
|
|
else
|
|
bytes_written = 2;
|
|
|
|
break;
|
|
|
|
case 4:
|
|
if (get_user(buf32, (u32 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else if (sisusb_write_memio_long(sisusb,
|
|
SISUSB_TYPE_IO,
|
|
address, buf32))
|
|
errno = -EIO;
|
|
else
|
|
bytes_written = 4;
|
|
|
|
break;
|
|
|
|
default:
|
|
errno = -EIO;
|
|
}
|
|
|
|
} else if ((*ppos) >= SISUSB_PCI_PSEUDO_MEMBASE &&
|
|
(*ppos) < SISUSB_PCI_PSEUDO_MEMBASE + sisusb->vramsize) {
|
|
|
|
address = (*ppos) -
|
|
SISUSB_PCI_PSEUDO_MEMBASE +
|
|
SISUSB_PCI_MEMBASE;
|
|
|
|
/* Write video ram.
|
|
* Buffer is copied 1:1, therefore, on big-endian
|
|
* machines, the data must be swapped by userland
|
|
* in advance (if applicable; no swapping in 8bpp
|
|
* mode or if YUV data is being transferred).
|
|
*/
|
|
errno = sisusb_write_mem_bulk(sisusb, address, NULL,
|
|
count, buffer, 0, &bytes_written);
|
|
|
|
if (bytes_written)
|
|
errno = bytes_written;
|
|
|
|
} else if ((*ppos) >= SISUSB_PCI_PSEUDO_MMIOBASE &&
|
|
(*ppos) < SISUSB_PCI_PSEUDO_MMIOBASE + SISUSB_PCI_MMIOSIZE) {
|
|
|
|
address = (*ppos) -
|
|
SISUSB_PCI_PSEUDO_MMIOBASE +
|
|
SISUSB_PCI_MMIOBASE;
|
|
|
|
/* Write MMIO.
|
|
* Buffer is copied 1:1, therefore, on big-endian
|
|
* machines, the data must be swapped by userland
|
|
* in advance.
|
|
*/
|
|
errno = sisusb_write_mem_bulk(sisusb, address, NULL,
|
|
count, buffer, 0, &bytes_written);
|
|
|
|
if (bytes_written)
|
|
errno = bytes_written;
|
|
|
|
} else if ((*ppos) >= SISUSB_PCI_PSEUDO_PCIBASE &&
|
|
(*ppos) <= SISUSB_PCI_PSEUDO_PCIBASE + SISUSB_PCI_PCONFSIZE) {
|
|
|
|
if (count != 4) {
|
|
mutex_unlock(&sisusb->lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
address = (*ppos) - SISUSB_PCI_PSEUDO_PCIBASE;
|
|
|
|
/* Write PCI config register.
|
|
* Given value expected in machine endianness.
|
|
*/
|
|
if (get_user(buf32, (u32 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else if (sisusb_write_pci_config(sisusb, address, buf32))
|
|
errno = -EIO;
|
|
else
|
|
bytes_written = 4;
|
|
|
|
|
|
} else {
|
|
|
|
/* Error */
|
|
errno = -EBADFD;
|
|
|
|
}
|
|
|
|
(*ppos) += bytes_written;
|
|
|
|
mutex_unlock(&sisusb->lock);
|
|
|
|
return errno ? errno : bytes_written;
|
|
}
|
|
|
|
static loff_t
|
|
sisusb_lseek(struct file *file, loff_t offset, int orig)
|
|
{
|
|
struct sisusb_usb_data *sisusb;
|
|
loff_t ret;
|
|
|
|
if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
|
|
return -ENODEV;
|
|
|
|
mutex_lock(&sisusb->lock);
|
|
|
|
/* Sanity check */
|
|
if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) {
|
|
mutex_unlock(&sisusb->lock);
|
|
return -ENODEV;
|
|
}
|
|
|
|
switch (orig) {
|
|
case 0:
|
|
file->f_pos = offset;
|
|
ret = file->f_pos;
|
|
/* never negative, no force_successful_syscall needed */
|
|
break;
|
|
case 1:
|
|
file->f_pos += offset;
|
|
ret = file->f_pos;
|
|
/* never negative, no force_successful_syscall needed */
|
|
break;
|
|
default:
|
|
/* seeking relative to "end of file" is not supported */
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
mutex_unlock(&sisusb->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sisusb_handle_command(struct sisusb_usb_data *sisusb, struct sisusb_command *y,
|
|
unsigned long arg)
|
|
{
|
|
int retval, port, length;
|
|
u32 address;
|
|
|
|
/* All our commands require the device
|
|
* to be initialized.
|
|
*/
|
|
if (!sisusb->devinit)
|
|
return -ENODEV;
|
|
|
|
port = y->data3 -
|
|
SISUSB_PCI_PSEUDO_IOPORTBASE +
|
|
SISUSB_PCI_IOPORTBASE;
|
|
|
|
switch (y->operation) {
|
|
case SUCMD_GET:
|
|
retval = sisusb_getidxreg(sisusb, port,
|
|
y->data0, &y->data1);
|
|
if (!retval) {
|
|
if (copy_to_user((void __user *)arg, y,
|
|
sizeof(*y)))
|
|
retval = -EFAULT;
|
|
}
|
|
break;
|
|
|
|
case SUCMD_SET:
|
|
retval = sisusb_setidxreg(sisusb, port,
|
|
y->data0, y->data1);
|
|
break;
|
|
|
|
case SUCMD_SETOR:
|
|
retval = sisusb_setidxregor(sisusb, port,
|
|
y->data0, y->data1);
|
|
break;
|
|
|
|
case SUCMD_SETAND:
|
|
retval = sisusb_setidxregand(sisusb, port,
|
|
y->data0, y->data1);
|
|
break;
|
|
|
|
case SUCMD_SETANDOR:
|
|
retval = sisusb_setidxregandor(sisusb, port,
|
|
y->data0, y->data1, y->data2);
|
|
break;
|
|
|
|
case SUCMD_SETMASK:
|
|
retval = sisusb_setidxregmask(sisusb, port,
|
|
y->data0, y->data1, y->data2);
|
|
break;
|
|
|
|
case SUCMD_CLRSCR:
|
|
/* Gfx core must be initialized */
|
|
if (!sisusb->gfxinit)
|
|
return -ENODEV;
|
|
|
|
length = (y->data0 << 16) | (y->data1 << 8) | y->data2;
|
|
address = y->data3 -
|
|
SISUSB_PCI_PSEUDO_MEMBASE +
|
|
SISUSB_PCI_MEMBASE;
|
|
retval = sisusb_clear_vram(sisusb, address, length);
|
|
break;
|
|
|
|
case SUCMD_HANDLETEXTMODE:
|
|
retval = 0;
|
|
#ifdef INCL_SISUSB_CON
|
|
/* Gfx core must be initialized, SiS_Pr must exist */
|
|
if (!sisusb->gfxinit || !sisusb->SiS_Pr)
|
|
return -ENODEV;
|
|
|
|
switch (y->data0) {
|
|
case 0:
|
|
retval = sisusb_reset_text_mode(sisusb, 0);
|
|
break;
|
|
case 1:
|
|
sisusb->textmodedestroyed = 1;
|
|
break;
|
|
}
|
|
#endif
|
|
break;
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
case SUCMD_SETMODE:
|
|
/* Gfx core must be initialized, SiS_Pr must exist */
|
|
if (!sisusb->gfxinit || !sisusb->SiS_Pr)
|
|
return -ENODEV;
|
|
|
|
retval = 0;
|
|
|
|
sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30;
|
|
sisusb->SiS_Pr->sisusb = (void *)sisusb;
|
|
|
|
if (SiSUSBSetMode(sisusb->SiS_Pr, y->data3))
|
|
retval = -EINVAL;
|
|
|
|
break;
|
|
|
|
case SUCMD_SETVESAMODE:
|
|
/* Gfx core must be initialized, SiS_Pr must exist */
|
|
if (!sisusb->gfxinit || !sisusb->SiS_Pr)
|
|
return -ENODEV;
|
|
|
|
retval = 0;
|
|
|
|
sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30;
|
|
sisusb->SiS_Pr->sisusb = (void *)sisusb;
|
|
|
|
if (SiSUSBSetVESAMode(sisusb->SiS_Pr, y->data3))
|
|
retval = -EINVAL;
|
|
|
|
break;
|
|
#endif
|
|
|
|
default:
|
|
retval = -EINVAL;
|
|
}
|
|
|
|
if (retval > 0)
|
|
retval = -EIO;
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int
|
|
sisusb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
struct sisusb_usb_data *sisusb;
|
|
struct sisusb_info x;
|
|
struct sisusb_command y;
|
|
int retval = 0;
|
|
u32 __user *argp = (u32 __user *)arg;
|
|
|
|
if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
|
|
return -ENODEV;
|
|
|
|
mutex_lock(&sisusb->lock);
|
|
|
|
/* Sanity check */
|
|
if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) {
|
|
retval = -ENODEV;
|
|
goto err_out;
|
|
}
|
|
|
|
switch (cmd) {
|
|
|
|
case SISUSB_GET_CONFIG_SIZE:
|
|
|
|
if (put_user(sizeof(x), argp))
|
|
retval = -EFAULT;
|
|
|
|
break;
|
|
|
|
case SISUSB_GET_CONFIG:
|
|
|
|
x.sisusb_id = SISUSB_ID;
|
|
x.sisusb_version = SISUSB_VERSION;
|
|
x.sisusb_revision = SISUSB_REVISION;
|
|
x.sisusb_patchlevel = SISUSB_PATCHLEVEL;
|
|
x.sisusb_gfxinit = sisusb->gfxinit;
|
|
x.sisusb_vrambase = SISUSB_PCI_PSEUDO_MEMBASE;
|
|
x.sisusb_mmiobase = SISUSB_PCI_PSEUDO_MMIOBASE;
|
|
x.sisusb_iobase = SISUSB_PCI_PSEUDO_IOPORTBASE;
|
|
x.sisusb_pcibase = SISUSB_PCI_PSEUDO_PCIBASE;
|
|
x.sisusb_vramsize = sisusb->vramsize;
|
|
x.sisusb_minor = sisusb->minor;
|
|
x.sisusb_fbdevactive= 0;
|
|
#ifdef INCL_SISUSB_CON
|
|
x.sisusb_conactive = sisusb->haveconsole ? 1 : 0;
|
|
#else
|
|
x.sisusb_conactive = 0;
|
|
#endif
|
|
|
|
if (copy_to_user((void __user *)arg, &x, sizeof(x)))
|
|
retval = -EFAULT;
|
|
|
|
break;
|
|
|
|
case SISUSB_COMMAND:
|
|
|
|
if (copy_from_user(&y, (void __user *)arg, sizeof(y)))
|
|
retval = -EFAULT;
|
|
else
|
|
retval = sisusb_handle_command(sisusb, &y, arg);
|
|
|
|
break;
|
|
|
|
default:
|
|
retval = -ENOTTY;
|
|
break;
|
|
}
|
|
|
|
err_out:
|
|
mutex_unlock(&sisusb->lock);
|
|
return retval;
|
|
}
|
|
|
|
#ifdef SISUSB_NEW_CONFIG_COMPAT
|
|
static long
|
|
sisusb_compat_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
|
|
{
|
|
long retval;
|
|
|
|
switch (cmd) {
|
|
case SISUSB_GET_CONFIG_SIZE:
|
|
case SISUSB_GET_CONFIG:
|
|
case SISUSB_COMMAND:
|
|
lock_kernel();
|
|
retval = sisusb_ioctl(f->f_path.dentry->d_inode, f, cmd, arg);
|
|
unlock_kernel();
|
|
return retval;
|
|
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static const struct file_operations usb_sisusb_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = sisusb_open,
|
|
.release = sisusb_release,
|
|
.read = sisusb_read,
|
|
.write = sisusb_write,
|
|
.llseek = sisusb_lseek,
|
|
#ifdef SISUSB_NEW_CONFIG_COMPAT
|
|
.compat_ioctl = sisusb_compat_ioctl,
|
|
#endif
|
|
.ioctl = sisusb_ioctl
|
|
};
|
|
|
|
static struct usb_class_driver usb_sisusb_class = {
|
|
.name = "sisusbvga%d",
|
|
.fops = &usb_sisusb_fops,
|
|
.minor_base = SISUSB_MINOR
|
|
};
|
|
|
|
static int sisusb_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *dev = interface_to_usbdev(intf);
|
|
struct sisusb_usb_data *sisusb;
|
|
int retval = 0, i;
|
|
const char *memfail =
|
|
KERN_ERR
|
|
"sisusbvga[%d]: Failed to allocate memory for %s buffer\n";
|
|
|
|
printk(KERN_INFO "sisusb: USB2VGA dongle found at address %d\n",
|
|
dev->devnum);
|
|
|
|
/* Allocate memory for our private */
|
|
if (!(sisusb = kzalloc(sizeof(*sisusb), GFP_KERNEL))) {
|
|
printk(KERN_ERR
|
|
"sisusb: Failed to allocate memory for private data\n");
|
|
return -ENOMEM;
|
|
}
|
|
kref_init(&sisusb->kref);
|
|
|
|
mutex_init(&(sisusb->lock));
|
|
|
|
/* Register device */
|
|
if ((retval = usb_register_dev(intf, &usb_sisusb_class))) {
|
|
printk(KERN_ERR
|
|
"sisusb: Failed to get a minor for device %d\n",
|
|
dev->devnum);
|
|
retval = -ENODEV;
|
|
goto error_1;
|
|
}
|
|
|
|
sisusb->sisusb_dev = dev;
|
|
sisusb->minor = intf->minor;
|
|
sisusb->vrambase = SISUSB_PCI_MEMBASE;
|
|
sisusb->mmiobase = SISUSB_PCI_MMIOBASE;
|
|
sisusb->mmiosize = SISUSB_PCI_MMIOSIZE;
|
|
sisusb->ioportbase = SISUSB_PCI_IOPORTBASE;
|
|
/* Everything else is zero */
|
|
|
|
/* Allocate buffers */
|
|
sisusb->ibufsize = SISUSB_IBUF_SIZE;
|
|
if (!(sisusb->ibuf = usb_buffer_alloc(dev, SISUSB_IBUF_SIZE,
|
|
GFP_KERNEL, &sisusb->transfer_dma_in))) {
|
|
printk(memfail, "input", sisusb->minor);
|
|
retval = -ENOMEM;
|
|
goto error_2;
|
|
}
|
|
|
|
sisusb->numobufs = 0;
|
|
sisusb->obufsize = SISUSB_OBUF_SIZE;
|
|
for (i = 0; i < NUMOBUFS; i++) {
|
|
if (!(sisusb->obuf[i] = usb_buffer_alloc(dev, SISUSB_OBUF_SIZE,
|
|
GFP_KERNEL,
|
|
&sisusb->transfer_dma_out[i]))) {
|
|
if (i == 0) {
|
|
printk(memfail, "output", sisusb->minor);
|
|
retval = -ENOMEM;
|
|
goto error_3;
|
|
}
|
|
break;
|
|
} else
|
|
sisusb->numobufs++;
|
|
|
|
}
|
|
|
|
/* Allocate URBs */
|
|
if (!(sisusb->sisurbin = usb_alloc_urb(0, GFP_KERNEL))) {
|
|
printk(KERN_ERR
|
|
"sisusbvga[%d]: Failed to allocate URBs\n",
|
|
sisusb->minor);
|
|
retval = -ENOMEM;
|
|
goto error_3;
|
|
}
|
|
sisusb->completein = 1;
|
|
|
|
for (i = 0; i < sisusb->numobufs; i++) {
|
|
if (!(sisusb->sisurbout[i] = usb_alloc_urb(0, GFP_KERNEL))) {
|
|
printk(KERN_ERR
|
|
"sisusbvga[%d]: Failed to allocate URBs\n",
|
|
sisusb->minor);
|
|
retval = -ENOMEM;
|
|
goto error_4;
|
|
}
|
|
sisusb->urbout_context[i].sisusb = (void *)sisusb;
|
|
sisusb->urbout_context[i].urbindex = i;
|
|
sisusb->urbstatus[i] = 0;
|
|
}
|
|
|
|
printk(KERN_INFO "sisusbvga[%d]: Allocated %d output buffers\n",
|
|
sisusb->minor, sisusb->numobufs);
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
/* Allocate our SiS_Pr */
|
|
if (!(sisusb->SiS_Pr = kmalloc(sizeof(struct SiS_Private), GFP_KERNEL))) {
|
|
printk(KERN_ERR
|
|
"sisusbvga[%d]: Failed to allocate SiS_Pr\n",
|
|
sisusb->minor);
|
|
}
|
|
#endif
|
|
|
|
/* Do remaining init stuff */
|
|
|
|
init_waitqueue_head(&sisusb->wait_q);
|
|
|
|
usb_set_intfdata(intf, sisusb);
|
|
|
|
usb_get_dev(sisusb->sisusb_dev);
|
|
|
|
sisusb->present = 1;
|
|
|
|
#ifdef SISUSB_OLD_CONFIG_COMPAT
|
|
{
|
|
int ret;
|
|
/* Our ioctls are all "32/64bit compatible" */
|
|
ret = register_ioctl32_conversion(SISUSB_GET_CONFIG_SIZE, NULL);
|
|
ret |= register_ioctl32_conversion(SISUSB_GET_CONFIG, NULL);
|
|
ret |= register_ioctl32_conversion(SISUSB_COMMAND, NULL);
|
|
if (ret)
|
|
printk(KERN_ERR
|
|
"sisusbvga[%d]: Error registering ioctl32 "
|
|
"translations\n",
|
|
sisusb->minor);
|
|
else
|
|
sisusb->ioctl32registered = 1;
|
|
}
|
|
#endif
|
|
|
|
if (dev->speed == USB_SPEED_HIGH) {
|
|
int initscreen = 1;
|
|
#ifdef INCL_SISUSB_CON
|
|
if (sisusb_first_vc > 0 &&
|
|
sisusb_last_vc > 0 &&
|
|
sisusb_first_vc <= sisusb_last_vc &&
|
|
sisusb_last_vc <= MAX_NR_CONSOLES)
|
|
initscreen = 0;
|
|
#endif
|
|
if (sisusb_init_gfxdevice(sisusb, initscreen))
|
|
printk(KERN_ERR
|
|
"sisusbvga[%d]: Failed to early "
|
|
"initialize device\n",
|
|
sisusb->minor);
|
|
|
|
} else
|
|
printk(KERN_INFO
|
|
"sisusbvga[%d]: Not attached to USB 2.0 hub, "
|
|
"deferring init\n",
|
|
sisusb->minor);
|
|
|
|
sisusb->ready = 1;
|
|
|
|
#ifdef SISUSBENDIANTEST
|
|
printk(KERN_DEBUG "sisusb: *** RWTEST ***\n");
|
|
sisusb_testreadwrite(sisusb);
|
|
printk(KERN_DEBUG "sisusb: *** RWTEST END ***\n");
|
|
#endif
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
sisusb_console_init(sisusb, sisusb_first_vc, sisusb_last_vc);
|
|
#endif
|
|
|
|
return 0;
|
|
|
|
error_4:
|
|
sisusb_free_urbs(sisusb);
|
|
error_3:
|
|
sisusb_free_buffers(sisusb);
|
|
error_2:
|
|
usb_deregister_dev(intf, &usb_sisusb_class);
|
|
error_1:
|
|
kfree(sisusb);
|
|
return retval;
|
|
}
|
|
|
|
static void sisusb_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct sisusb_usb_data *sisusb;
|
|
int minor;
|
|
|
|
/* This should *not* happen */
|
|
if (!(sisusb = usb_get_intfdata(intf)))
|
|
return;
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
sisusb_console_exit(sisusb);
|
|
#endif
|
|
|
|
/* The above code doesn't need the disconnect
|
|
* semaphore to be down; its meaning is to
|
|
* protect all other routines from the disconnect
|
|
* case, not the other way round.
|
|
*/
|
|
mutex_lock(&disconnect_mutex);
|
|
|
|
mutex_lock(&sisusb->lock);
|
|
|
|
/* Wait for all URBs to complete and kill them in case (MUST do) */
|
|
if (!sisusb_wait_all_out_complete(sisusb))
|
|
sisusb_kill_all_busy(sisusb);
|
|
|
|
minor = sisusb->minor;
|
|
|
|
usb_set_intfdata(intf, NULL);
|
|
|
|
usb_deregister_dev(intf, &usb_sisusb_class);
|
|
|
|
#ifdef SISUSB_OLD_CONFIG_COMPAT
|
|
if (sisusb->ioctl32registered) {
|
|
int ret;
|
|
sisusb->ioctl32registered = 0;
|
|
ret = unregister_ioctl32_conversion(SISUSB_GET_CONFIG_SIZE);
|
|
ret |= unregister_ioctl32_conversion(SISUSB_GET_CONFIG);
|
|
ret |= unregister_ioctl32_conversion(SISUSB_COMMAND);
|
|
if (ret) {
|
|
printk(KERN_ERR
|
|
"sisusbvga[%d]: Error unregistering "
|
|
"ioctl32 translations\n",
|
|
minor);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
sisusb->present = 0;
|
|
sisusb->ready = 0;
|
|
|
|
mutex_unlock(&sisusb->lock);
|
|
|
|
/* decrement our usage count */
|
|
kref_put(&sisusb->kref, sisusb_delete);
|
|
|
|
mutex_unlock(&disconnect_mutex);
|
|
|
|
printk(KERN_INFO "sisusbvga[%d]: Disconnected\n", minor);
|
|
}
|
|
|
|
static struct usb_device_id sisusb_table [] = {
|
|
{ USB_DEVICE(0x0711, 0x0900) },
|
|
{ USB_DEVICE(0x0711, 0x0901) },
|
|
{ USB_DEVICE(0x0711, 0x0902) },
|
|
{ USB_DEVICE(0x182d, 0x021c) },
|
|
{ USB_DEVICE(0x182d, 0x0269) },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE (usb, sisusb_table);
|
|
|
|
static struct usb_driver sisusb_driver = {
|
|
.name = "sisusb",
|
|
.probe = sisusb_probe,
|
|
.disconnect = sisusb_disconnect,
|
|
.id_table = sisusb_table,
|
|
};
|
|
|
|
static int __init usb_sisusb_init(void)
|
|
{
|
|
int retval;
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
sisusb_init_concode();
|
|
#endif
|
|
|
|
if (!(retval = usb_register(&sisusb_driver))) {
|
|
|
|
printk(KERN_INFO "sisusb: Driver version %d.%d.%d\n",
|
|
SISUSB_VERSION, SISUSB_REVISION, SISUSB_PATCHLEVEL);
|
|
printk(KERN_INFO
|
|
"sisusb: Copyright (C) 2005 Thomas Winischhofer\n");
|
|
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void __exit usb_sisusb_exit(void)
|
|
{
|
|
usb_deregister(&sisusb_driver);
|
|
}
|
|
|
|
module_init(usb_sisusb_init);
|
|
module_exit(usb_sisusb_exit);
|
|
|
|
MODULE_AUTHOR("Thomas Winischhofer <thomas@winischhofer.net>");
|
|
MODULE_DESCRIPTION("sisusbvga - Driver for Net2280/SiS315-based USB2VGA dongles");
|
|
MODULE_LICENSE("GPL");
|
|
|