linux/drivers/char/tty_ldisc.c
Alan Cox aef29bc260 tty: Fix the leak in tty_ldisc_release
Currently we reinit the ldisc on final tty close which is what the old code
did to ensure that if the device retained its termios settings then it had the
right ldisc. tty_ldisc_reinit does that but also leaves us with the reset
ldisc reference which is then leaked.

At this point we know the port will be recycled so we can kill the ldisc
off completely rather than try and add another ldisc free up when the kref
count hits zero.

At this point it is safe to keep the ldisc closed as tty_ldisc waiting
methods are only used from the user side, and as the final close we are
the last such reference. Interrupt/driver side methods will always use the
non wait version and get back a NULL.

Found with kmemleak and investigated/identified by Catalin Marinas.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-29 09:33:26 -07:00

908 lines
22 KiB
C

#include <linux/types.h>
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/fcntl.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/devpts_fs.h>
#include <linux/file.h>
#include <linux/console.h>
#include <linux/timer.h>
#include <linux/ctype.h>
#include <linux/kd.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/wait.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
#include <asm/system.h>
#include <linux/kbd_kern.h>
#include <linux/vt_kern.h>
#include <linux/selection.h>
#include <linux/kmod.h>
#include <linux/nsproxy.h>
/*
* This guards the refcounted line discipline lists. The lock
* must be taken with irqs off because there are hangup path
* callers who will do ldisc lookups and cannot sleep.
*/
static DEFINE_SPINLOCK(tty_ldisc_lock);
static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
/* Line disc dispatch table */
static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
/**
* tty_register_ldisc - install a line discipline
* @disc: ldisc number
* @new_ldisc: pointer to the ldisc object
*
* Installs a new line discipline into the kernel. The discipline
* is set up as unreferenced and then made available to the kernel
* from this point onwards.
*
* Locking:
* takes tty_ldisc_lock to guard against ldisc races
*/
int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc)
{
unsigned long flags;
int ret = 0;
if (disc < N_TTY || disc >= NR_LDISCS)
return -EINVAL;
spin_lock_irqsave(&tty_ldisc_lock, flags);
tty_ldiscs[disc] = new_ldisc;
new_ldisc->num = disc;
new_ldisc->refcount = 0;
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ret;
}
EXPORT_SYMBOL(tty_register_ldisc);
/**
* tty_unregister_ldisc - unload a line discipline
* @disc: ldisc number
* @new_ldisc: pointer to the ldisc object
*
* Remove a line discipline from the kernel providing it is not
* currently in use.
*
* Locking:
* takes tty_ldisc_lock to guard against ldisc races
*/
int tty_unregister_ldisc(int disc)
{
unsigned long flags;
int ret = 0;
if (disc < N_TTY || disc >= NR_LDISCS)
return -EINVAL;
spin_lock_irqsave(&tty_ldisc_lock, flags);
if (tty_ldiscs[disc]->refcount)
ret = -EBUSY;
else
tty_ldiscs[disc] = NULL;
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ret;
}
EXPORT_SYMBOL(tty_unregister_ldisc);
/**
* tty_ldisc_try_get - try and reference an ldisc
* @disc: ldisc number
*
* Attempt to open and lock a line discipline into place. Return
* the line discipline refcounted or an error.
*/
static struct tty_ldisc *tty_ldisc_try_get(int disc)
{
unsigned long flags;
struct tty_ldisc *ld;
struct tty_ldisc_ops *ldops;
int err = -EINVAL;
ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL);
if (ld == NULL)
return ERR_PTR(-ENOMEM);
spin_lock_irqsave(&tty_ldisc_lock, flags);
ld->ops = NULL;
ldops = tty_ldiscs[disc];
/* Check the entry is defined */
if (ldops) {
/* If the module is being unloaded we can't use it */
if (!try_module_get(ldops->owner))
err = -EAGAIN;
else {
/* lock it */
ldops->refcount++;
ld->ops = ldops;
ld->refcount = 0;
err = 0;
}
}
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
if (err) {
kfree(ld);
return ERR_PTR(err);
}
return ld;
}
/**
* tty_ldisc_get - take a reference to an ldisc
* @disc: ldisc number
*
* Takes a reference to a line discipline. Deals with refcounts and
* module locking counts. Returns NULL if the discipline is not available.
* Returns a pointer to the discipline and bumps the ref count if it is
* available
*
* Locking:
* takes tty_ldisc_lock to guard against ldisc races
*/
static struct tty_ldisc *tty_ldisc_get(int disc)
{
struct tty_ldisc *ld;
if (disc < N_TTY || disc >= NR_LDISCS)
return ERR_PTR(-EINVAL);
ld = tty_ldisc_try_get(disc);
if (IS_ERR(ld)) {
request_module("tty-ldisc-%d", disc);
ld = tty_ldisc_try_get(disc);
}
return ld;
}
/**
* tty_ldisc_put - drop ldisc reference
* @ld: ldisc
*
* Drop a reference to a line discipline. Manage refcounts and
* module usage counts. Free the ldisc once the recount hits zero.
*
* Locking:
* takes tty_ldisc_lock to guard against ldisc races
*/
static void tty_ldisc_put(struct tty_ldisc *ld)
{
unsigned long flags;
int disc = ld->ops->num;
struct tty_ldisc_ops *ldo;
BUG_ON(disc < N_TTY || disc >= NR_LDISCS);
spin_lock_irqsave(&tty_ldisc_lock, flags);
ldo = tty_ldiscs[disc];
BUG_ON(ldo->refcount == 0);
ldo->refcount--;
module_put(ldo->owner);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
WARN_ON(ld->refcount);
kfree(ld);
}
static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
{
return (*pos < NR_LDISCS) ? pos : NULL;
}
static void *tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos)
{
(*pos)++;
return (*pos < NR_LDISCS) ? pos : NULL;
}
static void tty_ldiscs_seq_stop(struct seq_file *m, void *v)
{
}
static int tty_ldiscs_seq_show(struct seq_file *m, void *v)
{
int i = *(loff_t *)v;
struct tty_ldisc *ld;
ld = tty_ldisc_try_get(i);
if (IS_ERR(ld))
return 0;
seq_printf(m, "%-10s %2d\n", ld->ops->name ? ld->ops->name : "???", i);
tty_ldisc_put(ld);
return 0;
}
static const struct seq_operations tty_ldiscs_seq_ops = {
.start = tty_ldiscs_seq_start,
.next = tty_ldiscs_seq_next,
.stop = tty_ldiscs_seq_stop,
.show = tty_ldiscs_seq_show,
};
static int proc_tty_ldiscs_open(struct inode *inode, struct file *file)
{
return seq_open(file, &tty_ldiscs_seq_ops);
}
const struct file_operations tty_ldiscs_proc_fops = {
.owner = THIS_MODULE,
.open = proc_tty_ldiscs_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
};
/**
* tty_ldisc_assign - set ldisc on a tty
* @tty: tty to assign
* @ld: line discipline
*
* Install an instance of a line discipline into a tty structure. The
* ldisc must have a reference count above zero to ensure it remains.
* The tty instance refcount starts at zero.
*
* Locking:
* Caller must hold references
*/
static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld)
{
tty->ldisc = ld;
}
/**
* tty_ldisc_try - internal helper
* @tty: the tty
*
* Make a single attempt to grab and bump the refcount on
* the tty ldisc. Return 0 on failure or 1 on success. This is
* used to implement both the waiting and non waiting versions
* of tty_ldisc_ref
*
* Locking: takes tty_ldisc_lock
*/
static int tty_ldisc_try(struct tty_struct *tty)
{
unsigned long flags;
struct tty_ldisc *ld;
int ret = 0;
spin_lock_irqsave(&tty_ldisc_lock, flags);
ld = tty->ldisc;
if (test_bit(TTY_LDISC, &tty->flags)) {
ld->refcount++;
ret = 1;
}
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ret;
}
/**
* tty_ldisc_ref_wait - wait for the tty ldisc
* @tty: tty device
*
* Dereference the line discipline for the terminal and take a
* reference to it. If the line discipline is in flux then
* wait patiently until it changes.
*
* Note: Must not be called from an IRQ/timer context. The caller
* must also be careful not to hold other locks that will deadlock
* against a discipline change, such as an existing ldisc reference
* (which we check for)
*
* Locking: call functions take tty_ldisc_lock
*/
struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
{
/* wait_event is a macro */
wait_event(tty_ldisc_wait, tty_ldisc_try(tty));
WARN_ON(tty->ldisc->refcount == 0);
return tty->ldisc;
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
/**
* tty_ldisc_ref - get the tty ldisc
* @tty: tty device
*
* Dereference the line discipline for the terminal and take a
* reference to it. If the line discipline is in flux then
* return NULL. Can be called from IRQ and timer functions.
*
* Locking: called functions take tty_ldisc_lock
*/
struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
{
if (tty_ldisc_try(tty))
return tty->ldisc;
return NULL;
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref);
/**
* tty_ldisc_deref - free a tty ldisc reference
* @ld: reference to free up
*
* Undoes the effect of tty_ldisc_ref or tty_ldisc_ref_wait. May
* be called in IRQ context.
*
* Locking: takes tty_ldisc_lock
*/
void tty_ldisc_deref(struct tty_ldisc *ld)
{
unsigned long flags;
BUG_ON(ld == NULL);
spin_lock_irqsave(&tty_ldisc_lock, flags);
if (ld->refcount == 0)
printk(KERN_ERR "tty_ldisc_deref: no references.\n");
else
ld->refcount--;
if (ld->refcount == 0)
wake_up(&tty_ldisc_wait);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
}
EXPORT_SYMBOL_GPL(tty_ldisc_deref);
/**
* tty_ldisc_enable - allow ldisc use
* @tty: terminal to activate ldisc on
*
* Set the TTY_LDISC flag when the line discipline can be called
* again. Do necessary wakeups for existing sleepers. Clear the LDISC
* changing flag to indicate any ldisc change is now over.
*
* Note: nobody should set the TTY_LDISC bit except via this function.
* Clearing directly is allowed.
*/
void tty_ldisc_enable(struct tty_struct *tty)
{
set_bit(TTY_LDISC, &tty->flags);
clear_bit(TTY_LDISC_CHANGING, &tty->flags);
wake_up(&tty_ldisc_wait);
}
/**
* tty_ldisc_flush - flush line discipline queue
* @tty: tty
*
* Flush the line discipline queue (if any) for this tty. If there
* is no line discipline active this is a no-op.
*/
void tty_ldisc_flush(struct tty_struct *tty)
{
struct tty_ldisc *ld = tty_ldisc_ref(tty);
if (ld) {
if (ld->ops->flush_buffer)
ld->ops->flush_buffer(tty);
tty_ldisc_deref(ld);
}
tty_buffer_flush(tty);
}
EXPORT_SYMBOL_GPL(tty_ldisc_flush);
/**
* tty_set_termios_ldisc - set ldisc field
* @tty: tty structure
* @num: line discipline number
*
* This is probably overkill for real world processors but
* they are not on hot paths so a little discipline won't do
* any harm.
*
* Locking: takes termios_mutex
*/
static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
{
mutex_lock(&tty->termios_mutex);
tty->termios->c_line = num;
mutex_unlock(&tty->termios_mutex);
}
/**
* tty_ldisc_open - open a line discipline
* @tty: tty we are opening the ldisc on
* @ld: discipline to open
*
* A helper opening method. Also a convenient debugging and check
* point.
*/
static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
{
WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags));
if (ld->ops->open)
return ld->ops->open(tty);
return 0;
}
/**
* tty_ldisc_close - close a line discipline
* @tty: tty we are opening the ldisc on
* @ld: discipline to close
*
* A helper close method. Also a convenient debugging and check
* point.
*/
static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld)
{
WARN_ON(!test_bit(TTY_LDISC_OPEN, &tty->flags));
clear_bit(TTY_LDISC_OPEN, &tty->flags);
if (ld->ops->close)
ld->ops->close(tty);
}
/**
* tty_ldisc_restore - helper for tty ldisc change
* @tty: tty to recover
* @old: previous ldisc
*
* Restore the previous line discipline or N_TTY when a line discipline
* change fails due to an open error
*/
static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
{
char buf[64];
struct tty_ldisc *new_ldisc;
int r;
/* There is an outstanding reference here so this is safe */
old = tty_ldisc_get(old->ops->num);
WARN_ON(IS_ERR(old));
tty_ldisc_assign(tty, old);
tty_set_termios_ldisc(tty, old->ops->num);
if (tty_ldisc_open(tty, old) < 0) {
tty_ldisc_put(old);
/* This driver is always present */
new_ldisc = tty_ldisc_get(N_TTY);
if (IS_ERR(new_ldisc))
panic("n_tty: get");
tty_ldisc_assign(tty, new_ldisc);
tty_set_termios_ldisc(tty, N_TTY);
r = tty_ldisc_open(tty, new_ldisc);
if (r < 0)
panic("Couldn't open N_TTY ldisc for "
"%s --- error %d.",
tty_name(tty, buf), r);
}
}
/**
* tty_ldisc_halt - shut down the line discipline
* @tty: tty device
*
* Shut down the line discipline and work queue for this tty device.
* The TTY_LDISC flag being cleared ensures no further references can
* be obtained while the delayed work queue halt ensures that no more
* data is fed to the ldisc.
*
* In order to wait for any existing references to complete see
* tty_ldisc_wait_idle.
*/
static int tty_ldisc_halt(struct tty_struct *tty)
{
clear_bit(TTY_LDISC, &tty->flags);
return cancel_delayed_work(&tty->buf.work);
}
/**
* tty_ldisc_wait_idle - wait for the ldisc to become idle
* @tty: tty to wait for
*
* Wait for the line discipline to become idle. The discipline must
* have been halted for this to guarantee it remains idle.
*
* tty_ldisc_lock protects the ref counts currently.
*/
static int tty_ldisc_wait_idle(struct tty_struct *tty)
{
unsigned long flags;
spin_lock_irqsave(&tty_ldisc_lock, flags);
while (tty->ldisc->refcount) {
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
if (wait_event_timeout(tty_ldisc_wait,
tty->ldisc->refcount == 0, 5 * HZ) == 0)
return -EBUSY;
spin_lock_irqsave(&tty_ldisc_lock, flags);
}
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return 0;
}
/**
* tty_set_ldisc - set line discipline
* @tty: the terminal to set
* @ldisc: the line discipline
*
* Set the discipline of a tty line. Must be called from a process
* context. The ldisc change logic has to protect itself against any
* overlapping ldisc change (including on the other end of pty pairs),
* the close of one side of a tty/pty pair, and eventually hangup.
*
* Locking: takes tty_ldisc_lock, termios_mutex
*/
int tty_set_ldisc(struct tty_struct *tty, int ldisc)
{
int retval;
struct tty_ldisc *o_ldisc, *new_ldisc;
int work, o_work = 0;
struct tty_struct *o_tty;
new_ldisc = tty_ldisc_get(ldisc);
if (IS_ERR(new_ldisc))
return PTR_ERR(new_ldisc);
/*
* We need to look at the tty locking here for pty/tty pairs
* when both sides try to change in parallel.
*/
o_tty = tty->link; /* o_tty is the pty side or NULL */
/*
* Check the no-op case
*/
if (tty->ldisc->ops->num == ldisc) {
tty_ldisc_put(new_ldisc);
return 0;
}
/*
* Problem: What do we do if this blocks ?
* We could deadlock here
*/
tty_wait_until_sent(tty, 0);
mutex_lock(&tty->ldisc_mutex);
/*
* We could be midstream of another ldisc change which has
* dropped the lock during processing. If so we need to wait.
*/
while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
mutex_unlock(&tty->ldisc_mutex);
wait_event(tty_ldisc_wait,
test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
mutex_lock(&tty->ldisc_mutex);
}
set_bit(TTY_LDISC_CHANGING, &tty->flags);
/*
* No more input please, we are switching. The new ldisc
* will update this value in the ldisc open function
*/
tty->receive_room = 0;
o_ldisc = tty->ldisc;
/*
* Make sure we don't change while someone holds a
* reference to the line discipline. The TTY_LDISC bit
* prevents anyone taking a reference once it is clear.
* We need the lock to avoid racing reference takers.
*
* We must clear the TTY_LDISC bit here to avoid a livelock
* with a userspace app continually trying to use the tty in
* parallel to the change and re-referencing the tty.
*/
work = tty_ldisc_halt(tty);
if (o_tty)
o_work = tty_ldisc_halt(o_tty);
/*
* Wait for ->hangup_work and ->buf.work handlers to terminate.
* We must drop the mutex here in case a hangup is also in process.
*/
mutex_unlock(&tty->ldisc_mutex);
flush_scheduled_work();
/* Let any existing reference holders finish */
retval = tty_ldisc_wait_idle(tty);
if (retval < 0) {
clear_bit(TTY_LDISC_CHANGING, &tty->flags);
tty_ldisc_put(new_ldisc);
return retval;
}
mutex_lock(&tty->ldisc_mutex);
if (test_bit(TTY_HUPPED, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
the ldisc data and closed the ldisc down */
clear_bit(TTY_LDISC_CHANGING, &tty->flags);
mutex_unlock(&tty->ldisc_mutex);
tty_ldisc_put(new_ldisc);
return -EIO;
}
/* Shutdown the current discipline. */
tty_ldisc_close(tty, o_ldisc);
/* Now set up the new line discipline. */
tty_ldisc_assign(tty, new_ldisc);
tty_set_termios_ldisc(tty, ldisc);
retval = tty_ldisc_open(tty, new_ldisc);
if (retval < 0) {
/* Back to the old one or N_TTY if we can't */
tty_ldisc_put(new_ldisc);
tty_ldisc_restore(tty, o_ldisc);
}
/* At this point we hold a reference to the new ldisc and a
a reference to the old ldisc. If we ended up flipping back
to the existing ldisc we have two references to it */
if (tty->ldisc->ops->num != o_ldisc->ops->num && tty->ops->set_ldisc)
tty->ops->set_ldisc(tty);
tty_ldisc_put(o_ldisc);
/*
* Allow ldisc referencing to occur again
*/
tty_ldisc_enable(tty);
if (o_tty)
tty_ldisc_enable(o_tty);
/* Restart the work queue in case no characters kick it off. Safe if
already running */
if (work)
schedule_delayed_work(&tty->buf.work, 1);
if (o_work)
schedule_delayed_work(&o_tty->buf.work, 1);
mutex_unlock(&tty->ldisc_mutex);
return retval;
}
/**
* tty_reset_termios - reset terminal state
* @tty: tty to reset
*
* Restore a terminal to the driver default state.
*/
static void tty_reset_termios(struct tty_struct *tty)
{
mutex_lock(&tty->termios_mutex);
*tty->termios = tty->driver->init_termios;
tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
mutex_unlock(&tty->termios_mutex);
}
/**
* tty_ldisc_reinit - reinitialise the tty ldisc
* @tty: tty to reinit
*
* Switch the tty back to N_TTY line discipline and leave the
* ldisc state closed
*/
static void tty_ldisc_reinit(struct tty_struct *tty)
{
struct tty_ldisc *ld;
tty_ldisc_close(tty, tty->ldisc);
tty_ldisc_put(tty->ldisc);
tty->ldisc = NULL;
/*
* Switch the line discipline back
*/
ld = tty_ldisc_get(N_TTY);
BUG_ON(IS_ERR(ld));
tty_ldisc_assign(tty, ld);
tty_set_termios_ldisc(tty, N_TTY);
}
/**
* tty_ldisc_hangup - hangup ldisc reset
* @tty: tty being hung up
*
* Some tty devices reset their termios when they receive a hangup
* event. In that situation we must also switch back to N_TTY properly
* before we reset the termios data.
*
* Locking: We can take the ldisc mutex as the rest of the code is
* careful to allow for this.
*
* In the pty pair case this occurs in the close() path of the
* tty itself so we must be careful about locking rules.
*/
void tty_ldisc_hangup(struct tty_struct *tty)
{
struct tty_ldisc *ld;
/*
* FIXME! What are the locking issues here? This may me overdoing
* things... This question is especially important now that we've
* removed the irqlock.
*/
ld = tty_ldisc_ref(tty);
if (ld != NULL) {
/* We may have no line discipline at this point */
if (ld->ops->flush_buffer)
ld->ops->flush_buffer(tty);
tty_driver_flush_buffer(tty);
if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) &&
ld->ops->write_wakeup)
ld->ops->write_wakeup(tty);
if (ld->ops->hangup)
ld->ops->hangup(tty);
tty_ldisc_deref(ld);
}
/*
* FIXME: Once we trust the LDISC code better we can wait here for
* ldisc completion and fix the driver call race
*/
wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
wake_up_interruptible_poll(&tty->read_wait, POLLIN);
/*
* Shutdown the current line discipline, and reset it to
* N_TTY.
*/
if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
/* Avoid racing set_ldisc */
mutex_lock(&tty->ldisc_mutex);
/* Switch back to N_TTY */
tty_ldisc_halt(tty);
tty_ldisc_wait_idle(tty);
tty_ldisc_reinit(tty);
/* At this point we have a closed ldisc and we want to
reopen it. We could defer this to the next open but
it means auditing a lot of other paths so this is a FIXME */
WARN_ON(tty_ldisc_open(tty, tty->ldisc));
tty_ldisc_enable(tty);
mutex_unlock(&tty->ldisc_mutex);
tty_reset_termios(tty);
}
}
/**
* tty_ldisc_setup - open line discipline
* @tty: tty being shut down
* @o_tty: pair tty for pty/tty pairs
*
* Called during the initial open of a tty/pty pair in order to set up the
* line disciplines and bind them to the tty. This has no locking issues
* as the device isn't yet active.
*/
int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
{
struct tty_ldisc *ld = tty->ldisc;
int retval;
retval = tty_ldisc_open(tty, ld);
if (retval)
return retval;
if (o_tty) {
retval = tty_ldisc_open(o_tty, o_tty->ldisc);
if (retval) {
tty_ldisc_close(tty, ld);
return retval;
}
tty_ldisc_enable(o_tty);
}
tty_ldisc_enable(tty);
return 0;
}
/**
* tty_ldisc_release - release line discipline
* @tty: tty being shut down
* @o_tty: pair tty for pty/tty pairs
*
* Called during the final close of a tty/pty pair in order to shut down
* the line discpline layer. On exit the ldisc assigned is N_TTY and the
* ldisc has not been opened.
*/
void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
{
/*
* Prevent flush_to_ldisc() from rescheduling the work for later. Then
* kill any delayed work. As this is the final close it does not
* race with the set_ldisc code path.
*/
tty_ldisc_halt(tty);
flush_scheduled_work();
/*
* Wait for any short term users (we know they are just driver
* side waiters as the file is closing so user count on the file
* side is zero.
*/
tty_ldisc_wait_idle(tty);
/*
* Now kill off the ldisc
*/
tty_ldisc_close(tty, tty->ldisc);
tty_ldisc_put(tty->ldisc);
/* Force an oops if we mess this up */
tty->ldisc = NULL;
/* Ensure the next open requests the N_TTY ldisc */
tty_set_termios_ldisc(tty, N_TTY);
/* This will need doing differently if we need to lock */
if (o_tty)
tty_ldisc_release(o_tty, NULL);
/* And the memory resources remaining (buffers, termios) will be
disposed of when the kref hits zero */
}
/**
* tty_ldisc_init - ldisc setup for new tty
* @tty: tty being allocated
*
* Set up the line discipline objects for a newly allocated tty. Note that
* the tty structure is not completely set up when this call is made.
*/
void tty_ldisc_init(struct tty_struct *tty)
{
struct tty_ldisc *ld = tty_ldisc_get(N_TTY);
if (IS_ERR(ld))
panic("n_tty: init_tty");
tty_ldisc_assign(tty, ld);
}
void tty_ldisc_begin(void)
{
/* Setup the default TTY line discipline. */
(void) tty_register_ldisc(N_TTY, &tty_ldisc_N_TTY);
}