linux/arch/mips/pnx833x/stb22x/board.c

134 lines
3.8 KiB
C

/*
* board.c: STB225 board support.
*
* Copyright 2008 NXP Semiconductors
* Chris Steel <chris.steel@nxp.com>
* Daniel Laird <daniel.j.laird@nxp.com>
*
* Based on software written by:
* Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <asm/bootinfo.h>
#include <linux/mm.h>
#include <pnx833x.h>
#include <gpio.h>
/* endianess twiddlers */
#define PNX8335_DEBUG0 0x4400
#define PNX8335_DEBUG1 0x4404
#define PNX8335_DEBUG2 0x4408
#define PNX8335_DEBUG3 0x440c
#define PNX8335_DEBUG4 0x4410
#define PNX8335_DEBUG5 0x4414
#define PNX8335_DEBUG6 0x4418
#define PNX8335_DEBUG7 0x441c
int prom_argc;
char **prom_argv, **prom_envp;
extern void prom_init_cmdline(void);
extern char *prom_getenv(char *envname);
const char *get_system_type(void)
{
return "NXP STB22x";
}
static inline unsigned long env_or_default(char *env, unsigned long dfl)
{
char *str = prom_getenv(env);
return str ? simple_strtol(str, 0, 0) : dfl;
}
void __init prom_init(void)
{
unsigned long memsize;
prom_argc = fw_arg0;
prom_argv = (char **)fw_arg1;
prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize = env_or_default("memsize", 0x02000000);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
void __init pnx833x_board_setup(void)
{
pnx833x_gpio_select_function_alt(4);
pnx833x_gpio_select_output(4);
pnx833x_gpio_select_function_alt(5);
pnx833x_gpio_select_input(5);
pnx833x_gpio_select_function_alt(6);
pnx833x_gpio_select_input(6);
pnx833x_gpio_select_function_alt(7);
pnx833x_gpio_select_output(7);
pnx833x_gpio_select_function_alt(25);
pnx833x_gpio_select_function_alt(26);
pnx833x_gpio_select_function_alt(27);
pnx833x_gpio_select_function_alt(28);
pnx833x_gpio_select_function_alt(29);
pnx833x_gpio_select_function_alt(30);
pnx833x_gpio_select_function_alt(31);
pnx833x_gpio_select_function_alt(32);
pnx833x_gpio_select_function_alt(33);
#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
/* Setup MIU for NAND access on CS0...
*
* (it seems that we must also configure CS1 for reliable operation,
* otherwise the first read ID command will fail if it's read as 4 bytes
* but pass if it's read as 1 word.)
*/
/* Setup MIU CS0 & CS1 timing */
PNX833X_MIU_SEL0 = 0;
PNX833X_MIU_SEL1 = 0;
PNX833X_MIU_SEL0_TIMING = 0x50003081;
PNX833X_MIU_SEL1_TIMING = 0x50003081;
/* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */
pnx833x_gpio_select_function_alt(0);
/* Setup GPIO 04 to input NAND read/busy signal */
pnx833x_gpio_select_function_io(4);
pnx833x_gpio_select_input(4);
/* Setup GPIO 05 to disable NAND write protect */
pnx833x_gpio_select_function_io(5);
pnx833x_gpio_select_output(5);
pnx833x_gpio_write(1, 5);
#elif IS_ENABLED(CONFIG_MTD_CFI)
/* Set up MIU for 16-bit NOR access on CS0 and CS1... */
/* Setup MIU CS0 & CS1 timing */
PNX833X_MIU_SEL0 = 1;
PNX833X_MIU_SEL1 = 1;
PNX833X_MIU_SEL0_TIMING = 0x6A08D082;
PNX833X_MIU_SEL1_TIMING = 0x6A08D082;
/* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */
pnx833x_gpio_select_function_alt(0);
#endif
}