1809 lines
43 KiB
C
1809 lines
43 KiB
C
/*
|
|
* linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver
|
|
*
|
|
* Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* Thanks to the following companies for their support:
|
|
*
|
|
* - JMicron (hardware and technical support)
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/highmem.h>
|
|
#include <linux/io.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/scatterlist.h>
|
|
|
|
#include <linux/leds.h>
|
|
|
|
#include <linux/mmc/host.h>
|
|
|
|
#include "sdhci.h"
|
|
|
|
#define DRIVER_NAME "sdhci"
|
|
|
|
#define DBG(f, x...) \
|
|
pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
|
|
|
|
static unsigned int debug_quirks = 0;
|
|
|
|
static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *);
|
|
static void sdhci_finish_data(struct sdhci_host *);
|
|
|
|
static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
|
|
static void sdhci_finish_command(struct sdhci_host *);
|
|
|
|
static void sdhci_dumpregs(struct sdhci_host *host)
|
|
{
|
|
printk(KERN_DEBUG DRIVER_NAME ": ============== REGISTER DUMP ==============\n");
|
|
|
|
printk(KERN_DEBUG DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
|
|
readl(host->ioaddr + SDHCI_DMA_ADDRESS),
|
|
readw(host->ioaddr + SDHCI_HOST_VERSION));
|
|
printk(KERN_DEBUG DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
|
|
readw(host->ioaddr + SDHCI_BLOCK_SIZE),
|
|
readw(host->ioaddr + SDHCI_BLOCK_COUNT));
|
|
printk(KERN_DEBUG DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
|
|
readl(host->ioaddr + SDHCI_ARGUMENT),
|
|
readw(host->ioaddr + SDHCI_TRANSFER_MODE));
|
|
printk(KERN_DEBUG DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
|
|
readl(host->ioaddr + SDHCI_PRESENT_STATE),
|
|
readb(host->ioaddr + SDHCI_HOST_CONTROL));
|
|
printk(KERN_DEBUG DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
|
|
readb(host->ioaddr + SDHCI_POWER_CONTROL),
|
|
readb(host->ioaddr + SDHCI_BLOCK_GAP_CONTROL));
|
|
printk(KERN_DEBUG DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
|
|
readb(host->ioaddr + SDHCI_WAKE_UP_CONTROL),
|
|
readw(host->ioaddr + SDHCI_CLOCK_CONTROL));
|
|
printk(KERN_DEBUG DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
|
|
readb(host->ioaddr + SDHCI_TIMEOUT_CONTROL),
|
|
readl(host->ioaddr + SDHCI_INT_STATUS));
|
|
printk(KERN_DEBUG DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
|
|
readl(host->ioaddr + SDHCI_INT_ENABLE),
|
|
readl(host->ioaddr + SDHCI_SIGNAL_ENABLE));
|
|
printk(KERN_DEBUG DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
|
|
readw(host->ioaddr + SDHCI_ACMD12_ERR),
|
|
readw(host->ioaddr + SDHCI_SLOT_INT_STATUS));
|
|
printk(KERN_DEBUG DRIVER_NAME ": Caps: 0x%08x | Max curr: 0x%08x\n",
|
|
readl(host->ioaddr + SDHCI_CAPABILITIES),
|
|
readl(host->ioaddr + SDHCI_MAX_CURRENT));
|
|
|
|
printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
|
|
}
|
|
|
|
/*****************************************************************************\
|
|
* *
|
|
* Low level functions *
|
|
* *
|
|
\*****************************************************************************/
|
|
|
|
static void sdhci_reset(struct sdhci_host *host, u8 mask)
|
|
{
|
|
unsigned long timeout;
|
|
|
|
if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
|
|
if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
|
|
SDHCI_CARD_PRESENT))
|
|
return;
|
|
}
|
|
|
|
writeb(mask, host->ioaddr + SDHCI_SOFTWARE_RESET);
|
|
|
|
if (mask & SDHCI_RESET_ALL)
|
|
host->clock = 0;
|
|
|
|
/* Wait max 100 ms */
|
|
timeout = 100;
|
|
|
|
/* hw clears the bit when it's done */
|
|
while (readb(host->ioaddr + SDHCI_SOFTWARE_RESET) & mask) {
|
|
if (timeout == 0) {
|
|
printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
|
|
mmc_hostname(host->mmc), (int)mask);
|
|
sdhci_dumpregs(host);
|
|
return;
|
|
}
|
|
timeout--;
|
|
mdelay(1);
|
|
}
|
|
}
|
|
|
|
static void sdhci_init(struct sdhci_host *host)
|
|
{
|
|
u32 intmask;
|
|
|
|
sdhci_reset(host, SDHCI_RESET_ALL);
|
|
|
|
intmask = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
|
|
SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
|
|
SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
|
|
SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT |
|
|
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL |
|
|
SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE |
|
|
SDHCI_INT_ADMA_ERROR;
|
|
|
|
writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
|
|
writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
|
|
}
|
|
|
|
static void sdhci_activate_led(struct sdhci_host *host)
|
|
{
|
|
u8 ctrl;
|
|
|
|
ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
|
|
ctrl |= SDHCI_CTRL_LED;
|
|
writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
|
|
}
|
|
|
|
static void sdhci_deactivate_led(struct sdhci_host *host)
|
|
{
|
|
u8 ctrl;
|
|
|
|
ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
|
|
ctrl &= ~SDHCI_CTRL_LED;
|
|
writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
|
|
}
|
|
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
static void sdhci_led_control(struct led_classdev *led,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct sdhci_host *host = container_of(led, struct sdhci_host, led);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
if (brightness == LED_OFF)
|
|
sdhci_deactivate_led(host);
|
|
else
|
|
sdhci_activate_led(host);
|
|
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
}
|
|
#endif
|
|
|
|
/*****************************************************************************\
|
|
* *
|
|
* Core functions *
|
|
* *
|
|
\*****************************************************************************/
|
|
|
|
static void sdhci_read_block_pio(struct sdhci_host *host)
|
|
{
|
|
unsigned long flags;
|
|
size_t blksize, len, chunk;
|
|
u32 scratch;
|
|
u8 *buf;
|
|
|
|
DBG("PIO reading\n");
|
|
|
|
blksize = host->data->blksz;
|
|
chunk = 0;
|
|
|
|
local_irq_save(flags);
|
|
|
|
while (blksize) {
|
|
if (!sg_miter_next(&host->sg_miter))
|
|
BUG();
|
|
|
|
len = min(host->sg_miter.length, blksize);
|
|
|
|
blksize -= len;
|
|
host->sg_miter.consumed = len;
|
|
|
|
buf = host->sg_miter.addr;
|
|
|
|
while (len) {
|
|
if (chunk == 0) {
|
|
scratch = readl(host->ioaddr + SDHCI_BUFFER);
|
|
chunk = 4;
|
|
}
|
|
|
|
*buf = scratch & 0xFF;
|
|
|
|
buf++;
|
|
scratch >>= 8;
|
|
chunk--;
|
|
len--;
|
|
}
|
|
}
|
|
|
|
sg_miter_stop(&host->sg_miter);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static void sdhci_write_block_pio(struct sdhci_host *host)
|
|
{
|
|
unsigned long flags;
|
|
size_t blksize, len, chunk;
|
|
u32 scratch;
|
|
u8 *buf;
|
|
|
|
DBG("PIO writing\n");
|
|
|
|
blksize = host->data->blksz;
|
|
chunk = 0;
|
|
scratch = 0;
|
|
|
|
local_irq_save(flags);
|
|
|
|
while (blksize) {
|
|
if (!sg_miter_next(&host->sg_miter))
|
|
BUG();
|
|
|
|
len = min(host->sg_miter.length, blksize);
|
|
|
|
blksize -= len;
|
|
host->sg_miter.consumed = len;
|
|
|
|
buf = host->sg_miter.addr;
|
|
|
|
while (len) {
|
|
scratch |= (u32)*buf << (chunk * 8);
|
|
|
|
buf++;
|
|
chunk++;
|
|
len--;
|
|
|
|
if ((chunk == 4) || ((len == 0) && (blksize == 0))) {
|
|
writel(scratch, host->ioaddr + SDHCI_BUFFER);
|
|
chunk = 0;
|
|
scratch = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
sg_miter_stop(&host->sg_miter);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static void sdhci_transfer_pio(struct sdhci_host *host)
|
|
{
|
|
u32 mask;
|
|
|
|
BUG_ON(!host->data);
|
|
|
|
if (host->blocks == 0)
|
|
return;
|
|
|
|
if (host->data->flags & MMC_DATA_READ)
|
|
mask = SDHCI_DATA_AVAILABLE;
|
|
else
|
|
mask = SDHCI_SPACE_AVAILABLE;
|
|
|
|
/*
|
|
* Some controllers (JMicron JMB38x) mess up the buffer bits
|
|
* for transfers < 4 bytes. As long as it is just one block,
|
|
* we can ignore the bits.
|
|
*/
|
|
if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) &&
|
|
(host->data->blocks == 1))
|
|
mask = ~0;
|
|
|
|
while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
|
|
if (host->data->flags & MMC_DATA_READ)
|
|
sdhci_read_block_pio(host);
|
|
else
|
|
sdhci_write_block_pio(host);
|
|
|
|
host->blocks--;
|
|
if (host->blocks == 0)
|
|
break;
|
|
}
|
|
|
|
DBG("PIO transfer complete.\n");
|
|
}
|
|
|
|
static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
|
|
{
|
|
local_irq_save(*flags);
|
|
return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
|
|
}
|
|
|
|
static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags)
|
|
{
|
|
kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
|
|
local_irq_restore(*flags);
|
|
}
|
|
|
|
static int sdhci_adma_table_pre(struct sdhci_host *host,
|
|
struct mmc_data *data)
|
|
{
|
|
int direction;
|
|
|
|
u8 *desc;
|
|
u8 *align;
|
|
dma_addr_t addr;
|
|
dma_addr_t align_addr;
|
|
int len, offset;
|
|
|
|
struct scatterlist *sg;
|
|
int i;
|
|
char *buffer;
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* The spec does not specify endianness of descriptor table.
|
|
* We currently guess that it is LE.
|
|
*/
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
direction = DMA_FROM_DEVICE;
|
|
else
|
|
direction = DMA_TO_DEVICE;
|
|
|
|
/*
|
|
* The ADMA descriptor table is mapped further down as we
|
|
* need to fill it with data first.
|
|
*/
|
|
|
|
host->align_addr = dma_map_single(mmc_dev(host->mmc),
|
|
host->align_buffer, 128 * 4, direction);
|
|
if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
|
|
goto fail;
|
|
BUG_ON(host->align_addr & 0x3);
|
|
|
|
host->sg_count = dma_map_sg(mmc_dev(host->mmc),
|
|
data->sg, data->sg_len, direction);
|
|
if (host->sg_count == 0)
|
|
goto unmap_align;
|
|
|
|
desc = host->adma_desc;
|
|
align = host->align_buffer;
|
|
|
|
align_addr = host->align_addr;
|
|
|
|
for_each_sg(data->sg, sg, host->sg_count, i) {
|
|
addr = sg_dma_address(sg);
|
|
len = sg_dma_len(sg);
|
|
|
|
/*
|
|
* The SDHCI specification states that ADMA
|
|
* addresses must be 32-bit aligned. If they
|
|
* aren't, then we use a bounce buffer for
|
|
* the (up to three) bytes that screw up the
|
|
* alignment.
|
|
*/
|
|
offset = (4 - (addr & 0x3)) & 0x3;
|
|
if (offset) {
|
|
if (data->flags & MMC_DATA_WRITE) {
|
|
buffer = sdhci_kmap_atomic(sg, &flags);
|
|
WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
|
|
memcpy(align, buffer, offset);
|
|
sdhci_kunmap_atomic(buffer, &flags);
|
|
}
|
|
|
|
desc[7] = (align_addr >> 24) & 0xff;
|
|
desc[6] = (align_addr >> 16) & 0xff;
|
|
desc[5] = (align_addr >> 8) & 0xff;
|
|
desc[4] = (align_addr >> 0) & 0xff;
|
|
|
|
BUG_ON(offset > 65536);
|
|
|
|
desc[3] = (offset >> 8) & 0xff;
|
|
desc[2] = (offset >> 0) & 0xff;
|
|
|
|
desc[1] = 0x00;
|
|
desc[0] = 0x21; /* tran, valid */
|
|
|
|
align += 4;
|
|
align_addr += 4;
|
|
|
|
desc += 8;
|
|
|
|
addr += offset;
|
|
len -= offset;
|
|
}
|
|
|
|
desc[7] = (addr >> 24) & 0xff;
|
|
desc[6] = (addr >> 16) & 0xff;
|
|
desc[5] = (addr >> 8) & 0xff;
|
|
desc[4] = (addr >> 0) & 0xff;
|
|
|
|
BUG_ON(len > 65536);
|
|
|
|
desc[3] = (len >> 8) & 0xff;
|
|
desc[2] = (len >> 0) & 0xff;
|
|
|
|
desc[1] = 0x00;
|
|
desc[0] = 0x21; /* tran, valid */
|
|
|
|
desc += 8;
|
|
|
|
/*
|
|
* If this triggers then we have a calculation bug
|
|
* somewhere. :/
|
|
*/
|
|
WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4);
|
|
}
|
|
|
|
/*
|
|
* Add a terminating entry.
|
|
*/
|
|
desc[7] = 0;
|
|
desc[6] = 0;
|
|
desc[5] = 0;
|
|
desc[4] = 0;
|
|
|
|
desc[3] = 0;
|
|
desc[2] = 0;
|
|
|
|
desc[1] = 0x00;
|
|
desc[0] = 0x03; /* nop, end, valid */
|
|
|
|
/*
|
|
* Resync align buffer as we might have changed it.
|
|
*/
|
|
if (data->flags & MMC_DATA_WRITE) {
|
|
dma_sync_single_for_device(mmc_dev(host->mmc),
|
|
host->align_addr, 128 * 4, direction);
|
|
}
|
|
|
|
host->adma_addr = dma_map_single(mmc_dev(host->mmc),
|
|
host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
|
|
if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
|
|
goto unmap_entries;
|
|
BUG_ON(host->adma_addr & 0x3);
|
|
|
|
return 0;
|
|
|
|
unmap_entries:
|
|
dma_unmap_sg(mmc_dev(host->mmc), data->sg,
|
|
data->sg_len, direction);
|
|
unmap_align:
|
|
dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
|
|
128 * 4, direction);
|
|
fail:
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void sdhci_adma_table_post(struct sdhci_host *host,
|
|
struct mmc_data *data)
|
|
{
|
|
int direction;
|
|
|
|
struct scatterlist *sg;
|
|
int i, size;
|
|
u8 *align;
|
|
char *buffer;
|
|
unsigned long flags;
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
direction = DMA_FROM_DEVICE;
|
|
else
|
|
direction = DMA_TO_DEVICE;
|
|
|
|
dma_unmap_single(mmc_dev(host->mmc), host->adma_addr,
|
|
(128 * 2 + 1) * 4, DMA_TO_DEVICE);
|
|
|
|
dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
|
|
128 * 4, direction);
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
|
|
data->sg_len, direction);
|
|
|
|
align = host->align_buffer;
|
|
|
|
for_each_sg(data->sg, sg, host->sg_count, i) {
|
|
if (sg_dma_address(sg) & 0x3) {
|
|
size = 4 - (sg_dma_address(sg) & 0x3);
|
|
|
|
buffer = sdhci_kmap_atomic(sg, &flags);
|
|
WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
|
|
memcpy(buffer, align, size);
|
|
sdhci_kunmap_atomic(buffer, &flags);
|
|
|
|
align += 4;
|
|
}
|
|
}
|
|
}
|
|
|
|
dma_unmap_sg(mmc_dev(host->mmc), data->sg,
|
|
data->sg_len, direction);
|
|
}
|
|
|
|
static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
|
|
{
|
|
u8 count;
|
|
unsigned target_timeout, current_timeout;
|
|
|
|
/*
|
|
* If the host controller provides us with an incorrect timeout
|
|
* value, just skip the check and use 0xE. The hardware may take
|
|
* longer to time out, but that's much better than having a too-short
|
|
* timeout value.
|
|
*/
|
|
if ((host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL))
|
|
return 0xE;
|
|
|
|
/* timeout in us */
|
|
target_timeout = data->timeout_ns / 1000 +
|
|
data->timeout_clks / host->clock;
|
|
|
|
/*
|
|
* Figure out needed cycles.
|
|
* We do this in steps in order to fit inside a 32 bit int.
|
|
* The first step is the minimum timeout, which will have a
|
|
* minimum resolution of 6 bits:
|
|
* (1) 2^13*1000 > 2^22,
|
|
* (2) host->timeout_clk < 2^16
|
|
* =>
|
|
* (1) / (2) > 2^6
|
|
*/
|
|
count = 0;
|
|
current_timeout = (1 << 13) * 1000 / host->timeout_clk;
|
|
while (current_timeout < target_timeout) {
|
|
count++;
|
|
current_timeout <<= 1;
|
|
if (count >= 0xF)
|
|
break;
|
|
}
|
|
|
|
if (count >= 0xF) {
|
|
printk(KERN_WARNING "%s: Too large timeout requested!\n",
|
|
mmc_hostname(host->mmc));
|
|
count = 0xE;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
|
|
{
|
|
u8 count;
|
|
u8 ctrl;
|
|
int ret;
|
|
|
|
WARN_ON(host->data);
|
|
|
|
if (data == NULL)
|
|
return;
|
|
|
|
/* Sanity checks */
|
|
BUG_ON(data->blksz * data->blocks > 524288);
|
|
BUG_ON(data->blksz > host->mmc->max_blk_size);
|
|
BUG_ON(data->blocks > 65535);
|
|
|
|
host->data = data;
|
|
host->data_early = 0;
|
|
|
|
count = sdhci_calc_timeout(host, data);
|
|
writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
|
|
|
|
if (host->flags & SDHCI_USE_DMA)
|
|
host->flags |= SDHCI_REQ_USE_DMA;
|
|
|
|
/*
|
|
* FIXME: This doesn't account for merging when mapping the
|
|
* scatterlist.
|
|
*/
|
|
if (host->flags & SDHCI_REQ_USE_DMA) {
|
|
int broken, i;
|
|
struct scatterlist *sg;
|
|
|
|
broken = 0;
|
|
if (host->flags & SDHCI_USE_ADMA) {
|
|
if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
|
|
broken = 1;
|
|
} else {
|
|
if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
|
|
broken = 1;
|
|
}
|
|
|
|
if (unlikely(broken)) {
|
|
for_each_sg(data->sg, sg, data->sg_len, i) {
|
|
if (sg->length & 0x3) {
|
|
DBG("Reverting to PIO because of "
|
|
"transfer size (%d)\n",
|
|
sg->length);
|
|
host->flags &= ~SDHCI_REQ_USE_DMA;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The assumption here being that alignment is the same after
|
|
* translation to device address space.
|
|
*/
|
|
if (host->flags & SDHCI_REQ_USE_DMA) {
|
|
int broken, i;
|
|
struct scatterlist *sg;
|
|
|
|
broken = 0;
|
|
if (host->flags & SDHCI_USE_ADMA) {
|
|
/*
|
|
* As we use 3 byte chunks to work around
|
|
* alignment problems, we need to check this
|
|
* quirk.
|
|
*/
|
|
if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
|
|
broken = 1;
|
|
} else {
|
|
if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR)
|
|
broken = 1;
|
|
}
|
|
|
|
if (unlikely(broken)) {
|
|
for_each_sg(data->sg, sg, data->sg_len, i) {
|
|
if (sg->offset & 0x3) {
|
|
DBG("Reverting to PIO because of "
|
|
"bad alignment\n");
|
|
host->flags &= ~SDHCI_REQ_USE_DMA;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (host->flags & SDHCI_REQ_USE_DMA) {
|
|
if (host->flags & SDHCI_USE_ADMA) {
|
|
ret = sdhci_adma_table_pre(host, data);
|
|
if (ret) {
|
|
/*
|
|
* This only happens when someone fed
|
|
* us an invalid request.
|
|
*/
|
|
WARN_ON(1);
|
|
host->flags &= ~SDHCI_REQ_USE_DMA;
|
|
} else {
|
|
writel(host->adma_addr,
|
|
host->ioaddr + SDHCI_ADMA_ADDRESS);
|
|
}
|
|
} else {
|
|
int sg_cnt;
|
|
|
|
sg_cnt = dma_map_sg(mmc_dev(host->mmc),
|
|
data->sg, data->sg_len,
|
|
(data->flags & MMC_DATA_READ) ?
|
|
DMA_FROM_DEVICE :
|
|
DMA_TO_DEVICE);
|
|
if (sg_cnt == 0) {
|
|
/*
|
|
* This only happens when someone fed
|
|
* us an invalid request.
|
|
*/
|
|
WARN_ON(1);
|
|
host->flags &= ~SDHCI_REQ_USE_DMA;
|
|
} else {
|
|
WARN_ON(sg_cnt != 1);
|
|
writel(sg_dma_address(data->sg),
|
|
host->ioaddr + SDHCI_DMA_ADDRESS);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Always adjust the DMA selection as some controllers
|
|
* (e.g. JMicron) can't do PIO properly when the selection
|
|
* is ADMA.
|
|
*/
|
|
if (host->version >= SDHCI_SPEC_200) {
|
|
ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
|
|
ctrl &= ~SDHCI_CTRL_DMA_MASK;
|
|
if ((host->flags & SDHCI_REQ_USE_DMA) &&
|
|
(host->flags & SDHCI_USE_ADMA))
|
|
ctrl |= SDHCI_CTRL_ADMA32;
|
|
else
|
|
ctrl |= SDHCI_CTRL_SDMA;
|
|
writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
|
|
}
|
|
|
|
if (!(host->flags & SDHCI_REQ_USE_DMA)) {
|
|
sg_miter_start(&host->sg_miter,
|
|
data->sg, data->sg_len, SG_MITER_ATOMIC);
|
|
host->blocks = data->blocks;
|
|
}
|
|
|
|
/* We do not handle DMA boundaries, so set it to max (512 KiB) */
|
|
writew(SDHCI_MAKE_BLKSZ(7, data->blksz),
|
|
host->ioaddr + SDHCI_BLOCK_SIZE);
|
|
writew(data->blocks, host->ioaddr + SDHCI_BLOCK_COUNT);
|
|
}
|
|
|
|
static void sdhci_set_transfer_mode(struct sdhci_host *host,
|
|
struct mmc_data *data)
|
|
{
|
|
u16 mode;
|
|
|
|
if (data == NULL)
|
|
return;
|
|
|
|
WARN_ON(!host->data);
|
|
|
|
mode = SDHCI_TRNS_BLK_CNT_EN;
|
|
if (data->blocks > 1)
|
|
mode |= SDHCI_TRNS_MULTI;
|
|
if (data->flags & MMC_DATA_READ)
|
|
mode |= SDHCI_TRNS_READ;
|
|
if (host->flags & SDHCI_REQ_USE_DMA)
|
|
mode |= SDHCI_TRNS_DMA;
|
|
|
|
writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE);
|
|
}
|
|
|
|
static void sdhci_finish_data(struct sdhci_host *host)
|
|
{
|
|
struct mmc_data *data;
|
|
|
|
BUG_ON(!host->data);
|
|
|
|
data = host->data;
|
|
host->data = NULL;
|
|
|
|
if (host->flags & SDHCI_REQ_USE_DMA) {
|
|
if (host->flags & SDHCI_USE_ADMA)
|
|
sdhci_adma_table_post(host, data);
|
|
else {
|
|
dma_unmap_sg(mmc_dev(host->mmc), data->sg,
|
|
data->sg_len, (data->flags & MMC_DATA_READ) ?
|
|
DMA_FROM_DEVICE : DMA_TO_DEVICE);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The specification states that the block count register must
|
|
* be updated, but it does not specify at what point in the
|
|
* data flow. That makes the register entirely useless to read
|
|
* back so we have to assume that nothing made it to the card
|
|
* in the event of an error.
|
|
*/
|
|
if (data->error)
|
|
data->bytes_xfered = 0;
|
|
else
|
|
data->bytes_xfered = data->blksz * data->blocks;
|
|
|
|
if (data->stop) {
|
|
/*
|
|
* The controller needs a reset of internal state machines
|
|
* upon error conditions.
|
|
*/
|
|
if (data->error) {
|
|
sdhci_reset(host, SDHCI_RESET_CMD);
|
|
sdhci_reset(host, SDHCI_RESET_DATA);
|
|
}
|
|
|
|
sdhci_send_command(host, data->stop);
|
|
} else
|
|
tasklet_schedule(&host->finish_tasklet);
|
|
}
|
|
|
|
static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
|
|
{
|
|
int flags;
|
|
u32 mask;
|
|
unsigned long timeout;
|
|
|
|
WARN_ON(host->cmd);
|
|
|
|
/* Wait max 10 ms */
|
|
timeout = 10;
|
|
|
|
mask = SDHCI_CMD_INHIBIT;
|
|
if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
|
|
mask |= SDHCI_DATA_INHIBIT;
|
|
|
|
/* We shouldn't wait for data inihibit for stop commands, even
|
|
though they might use busy signaling */
|
|
if (host->mrq->data && (cmd == host->mrq->data->stop))
|
|
mask &= ~SDHCI_DATA_INHIBIT;
|
|
|
|
while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
|
|
if (timeout == 0) {
|
|
printk(KERN_ERR "%s: Controller never released "
|
|
"inhibit bit(s).\n", mmc_hostname(host->mmc));
|
|
sdhci_dumpregs(host);
|
|
cmd->error = -EIO;
|
|
tasklet_schedule(&host->finish_tasklet);
|
|
return;
|
|
}
|
|
timeout--;
|
|
mdelay(1);
|
|
}
|
|
|
|
mod_timer(&host->timer, jiffies + 10 * HZ);
|
|
|
|
host->cmd = cmd;
|
|
|
|
sdhci_prepare_data(host, cmd->data);
|
|
|
|
writel(cmd->arg, host->ioaddr + SDHCI_ARGUMENT);
|
|
|
|
sdhci_set_transfer_mode(host, cmd->data);
|
|
|
|
if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
|
|
printk(KERN_ERR "%s: Unsupported response type!\n",
|
|
mmc_hostname(host->mmc));
|
|
cmd->error = -EINVAL;
|
|
tasklet_schedule(&host->finish_tasklet);
|
|
return;
|
|
}
|
|
|
|
if (!(cmd->flags & MMC_RSP_PRESENT))
|
|
flags = SDHCI_CMD_RESP_NONE;
|
|
else if (cmd->flags & MMC_RSP_136)
|
|
flags = SDHCI_CMD_RESP_LONG;
|
|
else if (cmd->flags & MMC_RSP_BUSY)
|
|
flags = SDHCI_CMD_RESP_SHORT_BUSY;
|
|
else
|
|
flags = SDHCI_CMD_RESP_SHORT;
|
|
|
|
if (cmd->flags & MMC_RSP_CRC)
|
|
flags |= SDHCI_CMD_CRC;
|
|
if (cmd->flags & MMC_RSP_OPCODE)
|
|
flags |= SDHCI_CMD_INDEX;
|
|
if (cmd->data)
|
|
flags |= SDHCI_CMD_DATA;
|
|
|
|
writew(SDHCI_MAKE_CMD(cmd->opcode, flags),
|
|
host->ioaddr + SDHCI_COMMAND);
|
|
}
|
|
|
|
static void sdhci_finish_command(struct sdhci_host *host)
|
|
{
|
|
int i;
|
|
|
|
BUG_ON(host->cmd == NULL);
|
|
|
|
if (host->cmd->flags & MMC_RSP_PRESENT) {
|
|
if (host->cmd->flags & MMC_RSP_136) {
|
|
/* CRC is stripped so we need to do some shifting. */
|
|
for (i = 0;i < 4;i++) {
|
|
host->cmd->resp[i] = readl(host->ioaddr +
|
|
SDHCI_RESPONSE + (3-i)*4) << 8;
|
|
if (i != 3)
|
|
host->cmd->resp[i] |=
|
|
readb(host->ioaddr +
|
|
SDHCI_RESPONSE + (3-i)*4-1);
|
|
}
|
|
} else {
|
|
host->cmd->resp[0] = readl(host->ioaddr + SDHCI_RESPONSE);
|
|
}
|
|
}
|
|
|
|
host->cmd->error = 0;
|
|
|
|
if (host->data && host->data_early)
|
|
sdhci_finish_data(host);
|
|
|
|
if (!host->cmd->data)
|
|
tasklet_schedule(&host->finish_tasklet);
|
|
|
|
host->cmd = NULL;
|
|
}
|
|
|
|
static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
|
|
{
|
|
int div;
|
|
u16 clk;
|
|
unsigned long timeout;
|
|
|
|
if (clock == host->clock)
|
|
return;
|
|
|
|
writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
|
|
|
|
if (clock == 0)
|
|
goto out;
|
|
|
|
for (div = 1;div < 256;div *= 2) {
|
|
if ((host->max_clk / div) <= clock)
|
|
break;
|
|
}
|
|
div >>= 1;
|
|
|
|
clk = div << SDHCI_DIVIDER_SHIFT;
|
|
clk |= SDHCI_CLOCK_INT_EN;
|
|
writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);
|
|
|
|
/* Wait max 10 ms */
|
|
timeout = 10;
|
|
while (!((clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL))
|
|
& SDHCI_CLOCK_INT_STABLE)) {
|
|
if (timeout == 0) {
|
|
printk(KERN_ERR "%s: Internal clock never "
|
|
"stabilised.\n", mmc_hostname(host->mmc));
|
|
sdhci_dumpregs(host);
|
|
return;
|
|
}
|
|
timeout--;
|
|
mdelay(1);
|
|
}
|
|
|
|
clk |= SDHCI_CLOCK_CARD_EN;
|
|
writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);
|
|
|
|
out:
|
|
host->clock = clock;
|
|
}
|
|
|
|
static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
|
|
{
|
|
u8 pwr;
|
|
|
|
if (host->power == power)
|
|
return;
|
|
|
|
if (power == (unsigned short)-1) {
|
|
writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Spec says that we should clear the power reg before setting
|
|
* a new value. Some controllers don't seem to like this though.
|
|
*/
|
|
if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
|
|
writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
|
|
|
|
pwr = SDHCI_POWER_ON;
|
|
|
|
switch (1 << power) {
|
|
case MMC_VDD_165_195:
|
|
pwr |= SDHCI_POWER_180;
|
|
break;
|
|
case MMC_VDD_29_30:
|
|
case MMC_VDD_30_31:
|
|
pwr |= SDHCI_POWER_300;
|
|
break;
|
|
case MMC_VDD_32_33:
|
|
case MMC_VDD_33_34:
|
|
pwr |= SDHCI_POWER_330;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
/*
|
|
* At least the Marvell CaFe chip gets confused if we set the voltage
|
|
* and set turn on power at the same time, so set the voltage first.
|
|
*/
|
|
if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
|
|
writeb(pwr & ~SDHCI_POWER_ON,
|
|
host->ioaddr + SDHCI_POWER_CONTROL);
|
|
|
|
writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
|
|
|
|
out:
|
|
host->power = power;
|
|
}
|
|
|
|
/*****************************************************************************\
|
|
* *
|
|
* MMC callbacks *
|
|
* *
|
|
\*****************************************************************************/
|
|
|
|
static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct sdhci_host *host;
|
|
unsigned long flags;
|
|
|
|
host = mmc_priv(mmc);
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
WARN_ON(host->mrq != NULL);
|
|
|
|
#ifndef CONFIG_LEDS_CLASS
|
|
sdhci_activate_led(host);
|
|
#endif
|
|
|
|
host->mrq = mrq;
|
|
|
|
if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)
|
|
|| (host->flags & SDHCI_DEVICE_DEAD)) {
|
|
host->mrq->cmd->error = -ENOMEDIUM;
|
|
tasklet_schedule(&host->finish_tasklet);
|
|
} else
|
|
sdhci_send_command(host, mrq->cmd);
|
|
|
|
mmiowb();
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
}
|
|
|
|
static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct sdhci_host *host;
|
|
unsigned long flags;
|
|
u8 ctrl;
|
|
|
|
host = mmc_priv(mmc);
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
if (host->flags & SDHCI_DEVICE_DEAD)
|
|
goto out;
|
|
|
|
/*
|
|
* Reset the chip on each power off.
|
|
* Should clear out any weird states.
|
|
*/
|
|
if (ios->power_mode == MMC_POWER_OFF) {
|
|
writel(0, host->ioaddr + SDHCI_SIGNAL_ENABLE);
|
|
sdhci_init(host);
|
|
}
|
|
|
|
sdhci_set_clock(host, ios->clock);
|
|
|
|
if (ios->power_mode == MMC_POWER_OFF)
|
|
sdhci_set_power(host, -1);
|
|
else
|
|
sdhci_set_power(host, ios->vdd);
|
|
|
|
ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
|
|
|
|
if (ios->bus_width == MMC_BUS_WIDTH_4)
|
|
ctrl |= SDHCI_CTRL_4BITBUS;
|
|
else
|
|
ctrl &= ~SDHCI_CTRL_4BITBUS;
|
|
|
|
if (ios->timing == MMC_TIMING_SD_HS)
|
|
ctrl |= SDHCI_CTRL_HISPD;
|
|
else
|
|
ctrl &= ~SDHCI_CTRL_HISPD;
|
|
|
|
writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
|
|
|
|
/*
|
|
* Some (ENE) controllers go apeshit on some ios operation,
|
|
* signalling timeout and CRC errors even on CMD0. Resetting
|
|
* it on each ios seems to solve the problem.
|
|
*/
|
|
if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
|
|
sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
|
|
|
|
out:
|
|
mmiowb();
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
}
|
|
|
|
static int sdhci_get_ro(struct mmc_host *mmc)
|
|
{
|
|
struct sdhci_host *host;
|
|
unsigned long flags;
|
|
int present;
|
|
|
|
host = mmc_priv(mmc);
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
if (host->flags & SDHCI_DEVICE_DEAD)
|
|
present = 0;
|
|
else
|
|
present = readl(host->ioaddr + SDHCI_PRESENT_STATE);
|
|
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
return !(present & SDHCI_WRITE_PROTECT);
|
|
}
|
|
|
|
static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
|
|
{
|
|
struct sdhci_host *host;
|
|
unsigned long flags;
|
|
u32 ier;
|
|
|
|
host = mmc_priv(mmc);
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
if (host->flags & SDHCI_DEVICE_DEAD)
|
|
goto out;
|
|
|
|
ier = readl(host->ioaddr + SDHCI_INT_ENABLE);
|
|
|
|
ier &= ~SDHCI_INT_CARD_INT;
|
|
if (enable)
|
|
ier |= SDHCI_INT_CARD_INT;
|
|
|
|
writel(ier, host->ioaddr + SDHCI_INT_ENABLE);
|
|
writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
|
|
|
|
out:
|
|
mmiowb();
|
|
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
}
|
|
|
|
static const struct mmc_host_ops sdhci_ops = {
|
|
.request = sdhci_request,
|
|
.set_ios = sdhci_set_ios,
|
|
.get_ro = sdhci_get_ro,
|
|
.enable_sdio_irq = sdhci_enable_sdio_irq,
|
|
};
|
|
|
|
/*****************************************************************************\
|
|
* *
|
|
* Tasklets *
|
|
* *
|
|
\*****************************************************************************/
|
|
|
|
static void sdhci_tasklet_card(unsigned long param)
|
|
{
|
|
struct sdhci_host *host;
|
|
unsigned long flags;
|
|
|
|
host = (struct sdhci_host*)param;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
|
|
if (host->mrq) {
|
|
printk(KERN_ERR "%s: Card removed during transfer!\n",
|
|
mmc_hostname(host->mmc));
|
|
printk(KERN_ERR "%s: Resetting controller.\n",
|
|
mmc_hostname(host->mmc));
|
|
|
|
sdhci_reset(host, SDHCI_RESET_CMD);
|
|
sdhci_reset(host, SDHCI_RESET_DATA);
|
|
|
|
host->mrq->cmd->error = -ENOMEDIUM;
|
|
tasklet_schedule(&host->finish_tasklet);
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
mmc_detect_change(host->mmc, msecs_to_jiffies(500));
|
|
}
|
|
|
|
static void sdhci_tasklet_finish(unsigned long param)
|
|
{
|
|
struct sdhci_host *host;
|
|
unsigned long flags;
|
|
struct mmc_request *mrq;
|
|
|
|
host = (struct sdhci_host*)param;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
del_timer(&host->timer);
|
|
|
|
mrq = host->mrq;
|
|
|
|
/*
|
|
* The controller needs a reset of internal state machines
|
|
* upon error conditions.
|
|
*/
|
|
if (!(host->flags & SDHCI_DEVICE_DEAD) &&
|
|
(mrq->cmd->error ||
|
|
(mrq->data && (mrq->data->error ||
|
|
(mrq->data->stop && mrq->data->stop->error))) ||
|
|
(host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
|
|
|
|
/* Some controllers need this kick or reset won't work here */
|
|
if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
|
|
unsigned int clock;
|
|
|
|
/* This is to force an update */
|
|
clock = host->clock;
|
|
host->clock = 0;
|
|
sdhci_set_clock(host, clock);
|
|
}
|
|
|
|
/* Spec says we should do both at the same time, but Ricoh
|
|
controllers do not like that. */
|
|
sdhci_reset(host, SDHCI_RESET_CMD);
|
|
sdhci_reset(host, SDHCI_RESET_DATA);
|
|
}
|
|
|
|
host->mrq = NULL;
|
|
host->cmd = NULL;
|
|
host->data = NULL;
|
|
|
|
#ifndef CONFIG_LEDS_CLASS
|
|
sdhci_deactivate_led(host);
|
|
#endif
|
|
|
|
mmiowb();
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
mmc_request_done(host->mmc, mrq);
|
|
}
|
|
|
|
static void sdhci_timeout_timer(unsigned long data)
|
|
{
|
|
struct sdhci_host *host;
|
|
unsigned long flags;
|
|
|
|
host = (struct sdhci_host*)data;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
if (host->mrq) {
|
|
printk(KERN_ERR "%s: Timeout waiting for hardware "
|
|
"interrupt.\n", mmc_hostname(host->mmc));
|
|
sdhci_dumpregs(host);
|
|
|
|
if (host->data) {
|
|
host->data->error = -ETIMEDOUT;
|
|
sdhci_finish_data(host);
|
|
} else {
|
|
if (host->cmd)
|
|
host->cmd->error = -ETIMEDOUT;
|
|
else
|
|
host->mrq->cmd->error = -ETIMEDOUT;
|
|
|
|
tasklet_schedule(&host->finish_tasklet);
|
|
}
|
|
}
|
|
|
|
mmiowb();
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
}
|
|
|
|
/*****************************************************************************\
|
|
* *
|
|
* Interrupt handling *
|
|
* *
|
|
\*****************************************************************************/
|
|
|
|
static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
|
|
{
|
|
BUG_ON(intmask == 0);
|
|
|
|
if (!host->cmd) {
|
|
printk(KERN_ERR "%s: Got command interrupt 0x%08x even "
|
|
"though no command operation was in progress.\n",
|
|
mmc_hostname(host->mmc), (unsigned)intmask);
|
|
sdhci_dumpregs(host);
|
|
return;
|
|
}
|
|
|
|
if (intmask & SDHCI_INT_TIMEOUT)
|
|
host->cmd->error = -ETIMEDOUT;
|
|
else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT |
|
|
SDHCI_INT_INDEX))
|
|
host->cmd->error = -EILSEQ;
|
|
|
|
if (host->cmd->error)
|
|
tasklet_schedule(&host->finish_tasklet);
|
|
else if (intmask & SDHCI_INT_RESPONSE)
|
|
sdhci_finish_command(host);
|
|
}
|
|
|
|
static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
|
|
{
|
|
BUG_ON(intmask == 0);
|
|
|
|
if (!host->data) {
|
|
/*
|
|
* A data end interrupt is sent together with the response
|
|
* for the stop command.
|
|
*/
|
|
if (intmask & SDHCI_INT_DATA_END)
|
|
return;
|
|
|
|
printk(KERN_ERR "%s: Got data interrupt 0x%08x even "
|
|
"though no data operation was in progress.\n",
|
|
mmc_hostname(host->mmc), (unsigned)intmask);
|
|
sdhci_dumpregs(host);
|
|
|
|
return;
|
|
}
|
|
|
|
if (intmask & SDHCI_INT_DATA_TIMEOUT)
|
|
host->data->error = -ETIMEDOUT;
|
|
else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT))
|
|
host->data->error = -EILSEQ;
|
|
else if (intmask & SDHCI_INT_ADMA_ERROR)
|
|
host->data->error = -EIO;
|
|
|
|
if (host->data->error)
|
|
sdhci_finish_data(host);
|
|
else {
|
|
if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
|
|
sdhci_transfer_pio(host);
|
|
|
|
/*
|
|
* We currently don't do anything fancy with DMA
|
|
* boundaries, but as we can't disable the feature
|
|
* we need to at least restart the transfer.
|
|
*/
|
|
if (intmask & SDHCI_INT_DMA_END)
|
|
writel(readl(host->ioaddr + SDHCI_DMA_ADDRESS),
|
|
host->ioaddr + SDHCI_DMA_ADDRESS);
|
|
|
|
if (intmask & SDHCI_INT_DATA_END) {
|
|
if (host->cmd) {
|
|
/*
|
|
* Data managed to finish before the
|
|
* command completed. Make sure we do
|
|
* things in the proper order.
|
|
*/
|
|
host->data_early = 1;
|
|
} else {
|
|
sdhci_finish_data(host);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static irqreturn_t sdhci_irq(int irq, void *dev_id)
|
|
{
|
|
irqreturn_t result;
|
|
struct sdhci_host* host = dev_id;
|
|
u32 intmask;
|
|
int cardint = 0;
|
|
|
|
spin_lock(&host->lock);
|
|
|
|
intmask = readl(host->ioaddr + SDHCI_INT_STATUS);
|
|
|
|
if (!intmask || intmask == 0xffffffff) {
|
|
result = IRQ_NONE;
|
|
goto out;
|
|
}
|
|
|
|
DBG("*** %s got interrupt: 0x%08x\n",
|
|
mmc_hostname(host->mmc), intmask);
|
|
|
|
if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
|
|
writel(intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE),
|
|
host->ioaddr + SDHCI_INT_STATUS);
|
|
tasklet_schedule(&host->card_tasklet);
|
|
}
|
|
|
|
intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
|
|
|
|
if (intmask & SDHCI_INT_CMD_MASK) {
|
|
writel(intmask & SDHCI_INT_CMD_MASK,
|
|
host->ioaddr + SDHCI_INT_STATUS);
|
|
sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
|
|
}
|
|
|
|
if (intmask & SDHCI_INT_DATA_MASK) {
|
|
writel(intmask & SDHCI_INT_DATA_MASK,
|
|
host->ioaddr + SDHCI_INT_STATUS);
|
|
sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
|
|
}
|
|
|
|
intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
|
|
|
|
intmask &= ~SDHCI_INT_ERROR;
|
|
|
|
if (intmask & SDHCI_INT_BUS_POWER) {
|
|
printk(KERN_ERR "%s: Card is consuming too much power!\n",
|
|
mmc_hostname(host->mmc));
|
|
writel(SDHCI_INT_BUS_POWER, host->ioaddr + SDHCI_INT_STATUS);
|
|
}
|
|
|
|
intmask &= ~SDHCI_INT_BUS_POWER;
|
|
|
|
if (intmask & SDHCI_INT_CARD_INT)
|
|
cardint = 1;
|
|
|
|
intmask &= ~SDHCI_INT_CARD_INT;
|
|
|
|
if (intmask) {
|
|
printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n",
|
|
mmc_hostname(host->mmc), intmask);
|
|
sdhci_dumpregs(host);
|
|
|
|
writel(intmask, host->ioaddr + SDHCI_INT_STATUS);
|
|
}
|
|
|
|
result = IRQ_HANDLED;
|
|
|
|
mmiowb();
|
|
out:
|
|
spin_unlock(&host->lock);
|
|
|
|
/*
|
|
* We have to delay this as it calls back into the driver.
|
|
*/
|
|
if (cardint)
|
|
mmc_signal_sdio_irq(host->mmc);
|
|
|
|
return result;
|
|
}
|
|
|
|
/*****************************************************************************\
|
|
* *
|
|
* Suspend/resume *
|
|
* *
|
|
\*****************************************************************************/
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state)
|
|
{
|
|
int ret;
|
|
|
|
ret = mmc_suspend_host(host->mmc, state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
free_irq(host->irq, host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(sdhci_suspend_host);
|
|
|
|
int sdhci_resume_host(struct sdhci_host *host)
|
|
{
|
|
int ret;
|
|
|
|
if (host->flags & SDHCI_USE_DMA) {
|
|
if (host->ops->enable_dma)
|
|
host->ops->enable_dma(host);
|
|
}
|
|
|
|
ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
|
|
mmc_hostname(host->mmc), host);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sdhci_init(host);
|
|
mmiowb();
|
|
|
|
ret = mmc_resume_host(host->mmc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(sdhci_resume_host);
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
/*****************************************************************************\
|
|
* *
|
|
* Device allocation/registration *
|
|
* *
|
|
\*****************************************************************************/
|
|
|
|
struct sdhci_host *sdhci_alloc_host(struct device *dev,
|
|
size_t priv_size)
|
|
{
|
|
struct mmc_host *mmc;
|
|
struct sdhci_host *host;
|
|
|
|
WARN_ON(dev == NULL);
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev);
|
|
if (!mmc)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
host = mmc_priv(mmc);
|
|
host->mmc = mmc;
|
|
|
|
return host;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(sdhci_alloc_host);
|
|
|
|
int sdhci_add_host(struct sdhci_host *host)
|
|
{
|
|
struct mmc_host *mmc;
|
|
unsigned int caps;
|
|
int ret;
|
|
|
|
WARN_ON(host == NULL);
|
|
if (host == NULL)
|
|
return -EINVAL;
|
|
|
|
mmc = host->mmc;
|
|
|
|
if (debug_quirks)
|
|
host->quirks = debug_quirks;
|
|
|
|
sdhci_reset(host, SDHCI_RESET_ALL);
|
|
|
|
host->version = readw(host->ioaddr + SDHCI_HOST_VERSION);
|
|
host->version = (host->version & SDHCI_SPEC_VER_MASK)
|
|
>> SDHCI_SPEC_VER_SHIFT;
|
|
if (host->version > SDHCI_SPEC_200) {
|
|
printk(KERN_ERR "%s: Unknown controller version (%d). "
|
|
"You may experience problems.\n", mmc_hostname(mmc),
|
|
host->version);
|
|
}
|
|
|
|
caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
|
|
|
|
if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
|
|
host->flags |= SDHCI_USE_DMA;
|
|
else if (!(caps & SDHCI_CAN_DO_DMA))
|
|
DBG("Controller doesn't have DMA capability\n");
|
|
else
|
|
host->flags |= SDHCI_USE_DMA;
|
|
|
|
if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
|
|
(host->flags & SDHCI_USE_DMA)) {
|
|
DBG("Disabling DMA as it is marked broken\n");
|
|
host->flags &= ~SDHCI_USE_DMA;
|
|
}
|
|
|
|
if (host->flags & SDHCI_USE_DMA) {
|
|
if ((host->version >= SDHCI_SPEC_200) &&
|
|
(caps & SDHCI_CAN_DO_ADMA2))
|
|
host->flags |= SDHCI_USE_ADMA;
|
|
}
|
|
|
|
if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
|
|
(host->flags & SDHCI_USE_ADMA)) {
|
|
DBG("Disabling ADMA as it is marked broken\n");
|
|
host->flags &= ~SDHCI_USE_ADMA;
|
|
}
|
|
|
|
if (host->flags & SDHCI_USE_DMA) {
|
|
if (host->ops->enable_dma) {
|
|
if (host->ops->enable_dma(host)) {
|
|
printk(KERN_WARNING "%s: No suitable DMA "
|
|
"available. Falling back to PIO.\n",
|
|
mmc_hostname(mmc));
|
|
host->flags &= ~(SDHCI_USE_DMA | SDHCI_USE_ADMA);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (host->flags & SDHCI_USE_ADMA) {
|
|
/*
|
|
* We need to allocate descriptors for all sg entries
|
|
* (128) and potentially one alignment transfer for
|
|
* each of those entries.
|
|
*/
|
|
host->adma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL);
|
|
host->align_buffer = kmalloc(128 * 4, GFP_KERNEL);
|
|
if (!host->adma_desc || !host->align_buffer) {
|
|
kfree(host->adma_desc);
|
|
kfree(host->align_buffer);
|
|
printk(KERN_WARNING "%s: Unable to allocate ADMA "
|
|
"buffers. Falling back to standard DMA.\n",
|
|
mmc_hostname(mmc));
|
|
host->flags &= ~SDHCI_USE_ADMA;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If we use DMA, then it's up to the caller to set the DMA
|
|
* mask, but PIO does not need the hw shim so we set a new
|
|
* mask here in that case.
|
|
*/
|
|
if (!(host->flags & SDHCI_USE_DMA)) {
|
|
host->dma_mask = DMA_BIT_MASK(64);
|
|
mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
|
|
}
|
|
|
|
host->max_clk =
|
|
(caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
|
|
if (host->max_clk == 0) {
|
|
printk(KERN_ERR "%s: Hardware doesn't specify base clock "
|
|
"frequency.\n", mmc_hostname(mmc));
|
|
return -ENODEV;
|
|
}
|
|
host->max_clk *= 1000000;
|
|
|
|
host->timeout_clk =
|
|
(caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
|
|
if (host->timeout_clk == 0) {
|
|
printk(KERN_ERR "%s: Hardware doesn't specify timeout clock "
|
|
"frequency.\n", mmc_hostname(mmc));
|
|
return -ENODEV;
|
|
}
|
|
if (caps & SDHCI_TIMEOUT_CLK_UNIT)
|
|
host->timeout_clk *= 1000;
|
|
|
|
/*
|
|
* Set host parameters.
|
|
*/
|
|
mmc->ops = &sdhci_ops;
|
|
mmc->f_min = host->max_clk / 256;
|
|
mmc->f_max = host->max_clk;
|
|
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
|
|
|
|
if (caps & SDHCI_CAN_DO_HISPD)
|
|
mmc->caps |= MMC_CAP_SD_HIGHSPEED;
|
|
|
|
mmc->ocr_avail = 0;
|
|
if (caps & SDHCI_CAN_VDD_330)
|
|
mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
|
|
if (caps & SDHCI_CAN_VDD_300)
|
|
mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31;
|
|
if (caps & SDHCI_CAN_VDD_180)
|
|
mmc->ocr_avail |= MMC_VDD_165_195;
|
|
|
|
if (mmc->ocr_avail == 0) {
|
|
printk(KERN_ERR "%s: Hardware doesn't report any "
|
|
"support voltages.\n", mmc_hostname(mmc));
|
|
return -ENODEV;
|
|
}
|
|
|
|
spin_lock_init(&host->lock);
|
|
|
|
/*
|
|
* Maximum number of segments. Depends on if the hardware
|
|
* can do scatter/gather or not.
|
|
*/
|
|
if (host->flags & SDHCI_USE_ADMA)
|
|
mmc->max_hw_segs = 128;
|
|
else if (host->flags & SDHCI_USE_DMA)
|
|
mmc->max_hw_segs = 1;
|
|
else /* PIO */
|
|
mmc->max_hw_segs = 128;
|
|
mmc->max_phys_segs = 128;
|
|
|
|
/*
|
|
* Maximum number of sectors in one transfer. Limited by DMA boundary
|
|
* size (512KiB).
|
|
*/
|
|
mmc->max_req_size = 524288;
|
|
|
|
/*
|
|
* Maximum segment size. Could be one segment with the maximum number
|
|
* of bytes. When doing hardware scatter/gather, each entry cannot
|
|
* be larger than 64 KiB though.
|
|
*/
|
|
if (host->flags & SDHCI_USE_ADMA)
|
|
mmc->max_seg_size = 65536;
|
|
else
|
|
mmc->max_seg_size = mmc->max_req_size;
|
|
|
|
/*
|
|
* Maximum block size. This varies from controller to controller and
|
|
* is specified in the capabilities register.
|
|
*/
|
|
mmc->max_blk_size = (caps & SDHCI_MAX_BLOCK_MASK) >> SDHCI_MAX_BLOCK_SHIFT;
|
|
if (mmc->max_blk_size >= 3) {
|
|
printk(KERN_WARNING "%s: Invalid maximum block size, "
|
|
"assuming 512 bytes\n", mmc_hostname(mmc));
|
|
mmc->max_blk_size = 512;
|
|
} else
|
|
mmc->max_blk_size = 512 << mmc->max_blk_size;
|
|
|
|
/*
|
|
* Maximum block count.
|
|
*/
|
|
mmc->max_blk_count = 65535;
|
|
|
|
/*
|
|
* Init tasklets.
|
|
*/
|
|
tasklet_init(&host->card_tasklet,
|
|
sdhci_tasklet_card, (unsigned long)host);
|
|
tasklet_init(&host->finish_tasklet,
|
|
sdhci_tasklet_finish, (unsigned long)host);
|
|
|
|
setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
|
|
|
|
ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
|
|
mmc_hostname(mmc), host);
|
|
if (ret)
|
|
goto untasklet;
|
|
|
|
sdhci_init(host);
|
|
|
|
#ifdef CONFIG_MMC_DEBUG
|
|
sdhci_dumpregs(host);
|
|
#endif
|
|
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
host->led.name = mmc_hostname(mmc);
|
|
host->led.brightness = LED_OFF;
|
|
host->led.default_trigger = mmc_hostname(mmc);
|
|
host->led.brightness_set = sdhci_led_control;
|
|
|
|
ret = led_classdev_register(mmc_dev(mmc), &host->led);
|
|
if (ret)
|
|
goto reset;
|
|
#endif
|
|
|
|
mmiowb();
|
|
|
|
mmc_add_host(mmc);
|
|
|
|
printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s%s\n",
|
|
mmc_hostname(mmc), host->hw_name, mmc_dev(mmc)->bus_id,
|
|
(host->flags & SDHCI_USE_ADMA)?"A":"",
|
|
(host->flags & SDHCI_USE_DMA)?"DMA":"PIO");
|
|
|
|
return 0;
|
|
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
reset:
|
|
sdhci_reset(host, SDHCI_RESET_ALL);
|
|
free_irq(host->irq, host);
|
|
#endif
|
|
untasklet:
|
|
tasklet_kill(&host->card_tasklet);
|
|
tasklet_kill(&host->finish_tasklet);
|
|
|
|
return ret;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(sdhci_add_host);
|
|
|
|
void sdhci_remove_host(struct sdhci_host *host, int dead)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (dead) {
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
host->flags |= SDHCI_DEVICE_DEAD;
|
|
|
|
if (host->mrq) {
|
|
printk(KERN_ERR "%s: Controller removed during "
|
|
" transfer!\n", mmc_hostname(host->mmc));
|
|
|
|
host->mrq->cmd->error = -ENOMEDIUM;
|
|
tasklet_schedule(&host->finish_tasklet);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
}
|
|
|
|
mmc_remove_host(host->mmc);
|
|
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
led_classdev_unregister(&host->led);
|
|
#endif
|
|
|
|
if (!dead)
|
|
sdhci_reset(host, SDHCI_RESET_ALL);
|
|
|
|
free_irq(host->irq, host);
|
|
|
|
del_timer_sync(&host->timer);
|
|
|
|
tasklet_kill(&host->card_tasklet);
|
|
tasklet_kill(&host->finish_tasklet);
|
|
|
|
kfree(host->adma_desc);
|
|
kfree(host->align_buffer);
|
|
|
|
host->adma_desc = NULL;
|
|
host->align_buffer = NULL;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(sdhci_remove_host);
|
|
|
|
void sdhci_free_host(struct sdhci_host *host)
|
|
{
|
|
mmc_free_host(host->mmc);
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(sdhci_free_host);
|
|
|
|
/*****************************************************************************\
|
|
* *
|
|
* Driver init/exit *
|
|
* *
|
|
\*****************************************************************************/
|
|
|
|
static int __init sdhci_drv_init(void)
|
|
{
|
|
printk(KERN_INFO DRIVER_NAME
|
|
": Secure Digital Host Controller Interface driver\n");
|
|
printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit sdhci_drv_exit(void)
|
|
{
|
|
}
|
|
|
|
module_init(sdhci_drv_init);
|
|
module_exit(sdhci_drv_exit);
|
|
|
|
module_param(debug_quirks, uint, 0444);
|
|
|
|
MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
|
|
MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
|