linux/drivers/net/can/sja1000/kvaser_pci.c

412 lines
10 KiB
C

/*
* Copyright (C) 2008 Per Dalen <per.dalen@cnw.se>
*
* Parts of this software are based on (derived) the following:
*
* - Kvaser linux driver, version 4.72 BETA
* Copyright (C) 2002-2007 KVASER AB
*
* - Lincan driver, version 0.3.3, OCERA project
* Copyright (C) 2004 Pavel Pisa
* Copyright (C) 2001 Arnaud Westenberg
*
* - Socketcan SJA1000 drivers
* Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
* Copyright (c) 2002-2007 Volkswagen Group Electronic Research
* Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
* 38106 Braunschweig, GERMANY
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the version 2 of the GNU General Public License
* as published by the Free Software Foundation
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/can/dev.h>
#include <linux/io.h>
#include "sja1000.h"
#define DRV_NAME "kvaser_pci"
MODULE_AUTHOR("Per Dalen <per.dalen@cnw.se>");
MODULE_DESCRIPTION("Socket-CAN driver for KVASER PCAN PCI cards");
MODULE_SUPPORTED_DEVICE("KVASER PCAN PCI CAN card");
MODULE_LICENSE("GPL v2");
#define MAX_NO_OF_CHANNELS 4 /* max no of channels on a single card */
struct kvaser_pci {
int channel;
struct pci_dev *pci_dev;
struct net_device *slave_dev[MAX_NO_OF_CHANNELS-1];
void __iomem *conf_addr;
void __iomem *res_addr;
int no_channels;
u8 xilinx_ver;
};
#define KVASER_PCI_CAN_CLOCK (16000000 / 2)
/*
* The board configuration is probably following:
* RX1 is connected to ground.
* TX1 is not connected.
* CLKO is not connected.
* Setting the OCR register to 0xDA is a good idea.
* This means normal output mode , push-pull and the correct polarity.
*/
#define KVASER_PCI_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
/*
* In the CDR register, you should set CBP to 1.
* You will probably also want to set the clock divider value to 0
* (meaning divide-by-2), the Pelican bit, and the clock-off bit
* (you will have no need for CLKOUT anyway).
*/
#define KVASER_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK)
/*
* These register values are valid for revision 14 of the Xilinx logic.
*/
#define XILINX_VERINT 7 /* Lower nibble simulate interrupts,
high nibble version number. */
#define XILINX_PRESUMED_VERSION 14
/*
* Important S5920 registers
*/
#define S5920_INTCSR 0x38
#define S5920_PTCR 0x60
#define INTCSR_ADDON_INTENABLE_M 0x2000
#define KVASER_PCI_PORT_BYTES 0x20
#define PCI_CONFIG_PORT_SIZE 0x80 /* size of the config io-memory */
#define PCI_PORT_SIZE 0x80 /* size of a channel io-memory */
#define PCI_PORT_XILINX_SIZE 0x08 /* size of a xilinx io-memory */
#define KVASER_PCI_VENDOR_ID1 0x10e8 /* the PCI device and vendor IDs */
#define KVASER_PCI_DEVICE_ID1 0x8406
#define KVASER_PCI_VENDOR_ID2 0x1a07 /* the PCI device and vendor IDs */
#define KVASER_PCI_DEVICE_ID2 0x0008
static DEFINE_PCI_DEVICE_TABLE(kvaser_pci_tbl) = {
{KVASER_PCI_VENDOR_ID1, KVASER_PCI_DEVICE_ID1, PCI_ANY_ID, PCI_ANY_ID,},
{KVASER_PCI_VENDOR_ID2, KVASER_PCI_DEVICE_ID2, PCI_ANY_ID, PCI_ANY_ID,},
{ 0,}
};
MODULE_DEVICE_TABLE(pci, kvaser_pci_tbl);
static u8 kvaser_pci_read_reg(const struct sja1000_priv *priv, int port)
{
return ioread8(priv->reg_base + port);
}
static void kvaser_pci_write_reg(const struct sja1000_priv *priv,
int port, u8 val)
{
iowrite8(val, priv->reg_base + port);
}
static void kvaser_pci_disable_irq(struct net_device *dev)
{
struct sja1000_priv *priv = netdev_priv(dev);
struct kvaser_pci *board = priv->priv;
u32 intcsr;
/* Disable interrupts from card */
intcsr = ioread32(board->conf_addr + S5920_INTCSR);
intcsr &= ~INTCSR_ADDON_INTENABLE_M;
iowrite32(intcsr, board->conf_addr + S5920_INTCSR);
}
static void kvaser_pci_enable_irq(struct net_device *dev)
{
struct sja1000_priv *priv = netdev_priv(dev);
struct kvaser_pci *board = priv->priv;
u32 tmp_en_io;
/* Enable interrupts from card */
tmp_en_io = ioread32(board->conf_addr + S5920_INTCSR);
tmp_en_io |= INTCSR_ADDON_INTENABLE_M;
iowrite32(tmp_en_io, board->conf_addr + S5920_INTCSR);
}
static int number_of_sja1000_chip(void __iomem *base_addr)
{
u8 status;
int i;
for (i = 0; i < MAX_NO_OF_CHANNELS; i++) {
/* reset chip */
iowrite8(MOD_RM, base_addr +
(i * KVASER_PCI_PORT_BYTES) + REG_MOD);
status = ioread8(base_addr +
(i * KVASER_PCI_PORT_BYTES) + REG_MOD);
/* check reset bit */
if (!(status & MOD_RM))
break;
}
return i;
}
static void kvaser_pci_del_chan(struct net_device *dev)
{
struct sja1000_priv *priv;
struct kvaser_pci *board;
int i;
if (!dev)
return;
priv = netdev_priv(dev);
board = priv->priv;
if (!board)
return;
dev_info(&board->pci_dev->dev, "Removing device %s\n",
dev->name);
/* Disable PCI interrupts */
kvaser_pci_disable_irq(dev);
for (i = 0; i < board->no_channels - 1; i++) {
if (board->slave_dev[i]) {
dev_info(&board->pci_dev->dev, "Removing device %s\n",
board->slave_dev[i]->name);
unregister_sja1000dev(board->slave_dev[i]);
free_sja1000dev(board->slave_dev[i]);
}
}
unregister_sja1000dev(dev);
pci_iounmap(board->pci_dev, priv->reg_base);
pci_iounmap(board->pci_dev, board->conf_addr);
pci_iounmap(board->pci_dev, board->res_addr);
free_sja1000dev(dev);
}
static int kvaser_pci_add_chan(struct pci_dev *pdev, int channel,
struct net_device **master_dev,
void __iomem *conf_addr,
void __iomem *res_addr,
void __iomem *base_addr)
{
struct net_device *dev;
struct sja1000_priv *priv;
struct kvaser_pci *board;
int err, init_step;
dev = alloc_sja1000dev(sizeof(struct kvaser_pci));
if (dev == NULL)
return -ENOMEM;
priv = netdev_priv(dev);
board = priv->priv;
board->pci_dev = pdev;
board->channel = channel;
/* S5920 */
board->conf_addr = conf_addr;
/* XILINX board wide address */
board->res_addr = res_addr;
if (channel == 0) {
board->xilinx_ver =
ioread8(board->res_addr + XILINX_VERINT) >> 4;
init_step = 2;
/* Assert PTADR# - we're in passive mode so the other bits are
not important */
iowrite32(0x80808080UL, board->conf_addr + S5920_PTCR);
/* Enable interrupts from card */
kvaser_pci_enable_irq(dev);
} else {
struct sja1000_priv *master_priv = netdev_priv(*master_dev);
struct kvaser_pci *master_board = master_priv->priv;
master_board->slave_dev[channel - 1] = dev;
master_board->no_channels = channel + 1;
board->xilinx_ver = master_board->xilinx_ver;
}
priv->reg_base = base_addr + channel * KVASER_PCI_PORT_BYTES;
priv->read_reg = kvaser_pci_read_reg;
priv->write_reg = kvaser_pci_write_reg;
priv->can.clock.freq = KVASER_PCI_CAN_CLOCK;
priv->ocr = KVASER_PCI_OCR;
priv->cdr = KVASER_PCI_CDR;
priv->irq_flags = IRQF_SHARED;
dev->irq = pdev->irq;
init_step = 4;
dev_info(&pdev->dev, "reg_base=%p conf_addr=%p irq=%d\n",
priv->reg_base, board->conf_addr, dev->irq);
SET_NETDEV_DEV(dev, &pdev->dev);
/* Register SJA1000 device */
err = register_sja1000dev(dev);
if (err) {
dev_err(&pdev->dev, "Registering device failed (err=%d)\n",
err);
goto failure;
}
if (channel == 0)
*master_dev = dev;
return 0;
failure:
kvaser_pci_del_chan(dev);
return err;
}
static int __devinit kvaser_pci_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int err;
struct net_device *master_dev = NULL;
struct sja1000_priv *priv;
struct kvaser_pci *board;
int no_channels;
void __iomem *base_addr = NULL;
void __iomem *conf_addr = NULL;
void __iomem *res_addr = NULL;
int i;
dev_info(&pdev->dev, "initializing device %04x:%04x\n",
pdev->vendor, pdev->device);
err = pci_enable_device(pdev);
if (err)
goto failure;
err = pci_request_regions(pdev, DRV_NAME);
if (err)
goto failure_release_pci;
/* S5920 */
conf_addr = pci_iomap(pdev, 0, PCI_CONFIG_PORT_SIZE);
if (conf_addr == NULL) {
err = -ENODEV;
goto failure_release_regions;
}
/* XILINX board wide address */
res_addr = pci_iomap(pdev, 2, PCI_PORT_XILINX_SIZE);
if (res_addr == NULL) {
err = -ENOMEM;
goto failure_iounmap;
}
base_addr = pci_iomap(pdev, 1, PCI_PORT_SIZE);
if (base_addr == NULL) {
err = -ENOMEM;
goto failure_iounmap;
}
no_channels = number_of_sja1000_chip(base_addr);
if (no_channels == 0) {
err = -ENOMEM;
goto failure_iounmap;
}
for (i = 0; i < no_channels; i++) {
err = kvaser_pci_add_chan(pdev, i, &master_dev,
conf_addr, res_addr,
base_addr);
if (err)
goto failure_cleanup;
}
priv = netdev_priv(master_dev);
board = priv->priv;
dev_info(&pdev->dev, "xilinx version=%d number of channels=%d\n",
board->xilinx_ver, board->no_channels);
pci_set_drvdata(pdev, master_dev);
return 0;
failure_cleanup:
kvaser_pci_del_chan(master_dev);
failure_iounmap:
if (conf_addr != NULL)
pci_iounmap(pdev, conf_addr);
if (res_addr != NULL)
pci_iounmap(pdev, res_addr);
if (base_addr != NULL)
pci_iounmap(pdev, base_addr);
failure_release_regions:
pci_release_regions(pdev);
failure_release_pci:
pci_disable_device(pdev);
failure:
return err;
}
static void __devexit kvaser_pci_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
kvaser_pci_del_chan(dev);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
}
static struct pci_driver kvaser_pci_driver = {
.name = DRV_NAME,
.id_table = kvaser_pci_tbl,
.probe = kvaser_pci_init_one,
.remove = __devexit_p(kvaser_pci_remove_one),
};
static int __init kvaser_pci_init(void)
{
return pci_register_driver(&kvaser_pci_driver);
}
static void __exit kvaser_pci_exit(void)
{
pci_unregister_driver(&kvaser_pci_driver);
}
module_init(kvaser_pci_init);
module_exit(kvaser_pci_exit);