linux/drivers/scsi/libfc
James Bottomley e346933365 isci update for 3.5
1/ Rework remote-node-context (RNC) handling for proper management of
    the silicon state machine in error handling and hot-plug conditions.
    Further details below, suffice to say if the RNC is mismanaged the
    silicon state machines may lock up.
 
 2/ Refactor the initialization code to be reused for suspend/resume support
 
 3/ Miscellaneous bug fixes to address discovery issues and hardware
    compatibility.
 
 RNC rework details from Jeff Skirvin:
 
 In the controller, devices as they appear on a SAS domain (or
 direct-attached SATA devices) are represented by memory structures known
 as "Remote Node Contexts" (RNCs).  These structures are transferred from
 main memory to the controller using a set of register commands; these
 commands include setting up the context ("posting"), removing the
 context ("invalidating"), and commands to control the scheduling of
 commands and connections to that remote device ("suspensions" and
 "resumptions").  There is a similar path to control RNC scheduling from
 the protocol engine, which interprets the results of command and data
 transmission and reception.
 
 In general, the controller chooses among non-suspended RNCs to find one
 that has work requiring scheduling the transmission of command and data
 frames to a target.  Likewise, when a target tries to return data back
 to the initiator, the state of the RNC is used by the controller to
 determine how to treat the incoming request. As an example, if the RNC
 is in the state "TX/RX Suspended", incoming SSP connection requests from
 the target will be rejected by the controller hardware.  When an RNC is
 "TX Suspended", it will not be selected by the controller hardware to
 start outgoing command or data operations (with certain priority-based
 exceptions).
 
 As mentioned above, there are two sources for management of the RNC
 states: commands from driver software, and the result of transmission
 and reception conditions of commands and data signaled by the controller
 hardware.  As an example of the latter, if an outgoing SSP command ends
 with a OPEN_REJECT(BAD_DESTINATION) status, the RNC state will
 transition to the "TX Suspended" state, and this is signaled by the
 controller hardware in the status to the completion of the pending
 command as well as signaled in a controller hardware event.  Examples of
 the former are included in the patch changelogs.
 
 Driver software is required to suspend the RNC in a "TX/RX Suspended"
 condition before any outstanding commands can be terminated.  Failure to
 guarantee this can lead to a complete hardware hang condition.  Earlier
 versions of the driver software did not guarantee that an RNC was
 correctly managed before I/O termination, and so operated in an unsafe
 way.
 
 Further, the driver performed unnecessary contortions to preserve the
 remote device command state and so was more complicated than it needed
 to be.  A simplifying driver assumption is that once an I/O has entered
 the error handler path without having completed in the target, the
 requirement on the driver is that all use of the sas_task must end.
 Beyond that, recovery of operation is dependent on libsas and other
 components to reset, rediscover and reconfigure the device before normal
 operation can restart.  In the driver, this simplifying assumption meant
 that the RNC management could be reduced to entry into the suspended
 state, terminating the targeted I/O request, and resuming the RNC as
 needed for device-specific management such as an SSP Abort Task or LUN
 Reset Management request.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPtYFXAAoJEB7SkWpmfYgCJkcP/1VvsuuitNy/YM9P1tb/RvQ7
 ytJzjGtWiAABHVWwjgB+Ng7hUTaP2r6l8KeNfwxpwXyNdBAUNysYEUBHAfPsKzKz
 espTmw3wVCnREajgKXZwFp9aTj8DcYFB6vKcC/ddACt3uRNjjA9En36+6797r8Vg
 YdebyjFX2FxwoUj0icTUiV/OXgb8w723imnCl8bfOhhFRi4eFZ4EJ23AdMkUya1i
 uYePAPJPSQJuU/87gNIx4JcR0qHJ1ziGPEY+XC47CzEeXbBTSPgWOwanQ6KPoXRJ
 XVxamfcKAjRdtwQ4m1vYBSE32RTdrjhujVbkGiPi6QaEbCLjhLSCIYyuS3XMckV+
 TCZ16o5kd/I6ZtZOeP4zZRGnNBkOPzY44qiJeKffjWDhTrFacx4XWJB/ftWPgEA5
 N2zFH3RM4sY0FUJ3I/Qe5CERNdCXMtcj+UAf3nHpAIVcv46Lp+qoSkdEx05uuuiN
 +D/dSlubktuvuzmB5WisL3qrjNEkkLTAGQpZs1j0ojLEBm0XAgV5EzqmHiZ0GOPD
 OQNFxeei9SlqgtKIIP0bymRispPrG2HVCOvExYMxzKR6fjxofZLAs/aWOsdhxgMq
 TlAyZJ6OmGI+KX68HHzoMpT9iquvmP64WGkfHzCx296BfSKiruLh/Jzt5gGwv+Z1
 5tlpnUr9dUTxx7qkQXvj
 =HYvO
 -----END PGP SIGNATURE-----

Merge tag 'isci-for-3.5' into misc

isci update for 3.5

1/ Rework remote-node-context (RNC) handling for proper management of
   the silicon state machine in error handling and hot-plug conditions.
   Further details below, suffice to say if the RNC is mismanaged the
   silicon state machines may lock up.

2/ Refactor the initialization code to be reused for suspend/resume support

3/ Miscellaneous bug fixes to address discovery issues and hardware
   compatibility.

RNC rework details from Jeff Skirvin:

In the controller, devices as they appear on a SAS domain (or
direct-attached SATA devices) are represented by memory structures known
as "Remote Node Contexts" (RNCs).  These structures are transferred from
main memory to the controller using a set of register commands; these
commands include setting up the context ("posting"), removing the
context ("invalidating"), and commands to control the scheduling of
commands and connections to that remote device ("suspensions" and
"resumptions").  There is a similar path to control RNC scheduling from
the protocol engine, which interprets the results of command and data
transmission and reception.

In general, the controller chooses among non-suspended RNCs to find one
that has work requiring scheduling the transmission of command and data
frames to a target.  Likewise, when a target tries to return data back
to the initiator, the state of the RNC is used by the controller to
determine how to treat the incoming request. As an example, if the RNC
is in the state "TX/RX Suspended", incoming SSP connection requests from
the target will be rejected by the controller hardware.  When an RNC is
"TX Suspended", it will not be selected by the controller hardware to
start outgoing command or data operations (with certain priority-based
exceptions).

As mentioned above, there are two sources for management of the RNC
states: commands from driver software, and the result of transmission
and reception conditions of commands and data signaled by the controller
hardware.  As an example of the latter, if an outgoing SSP command ends
with a OPEN_REJECT(BAD_DESTINATION) status, the RNC state will
transition to the "TX Suspended" state, and this is signaled by the
controller hardware in the status to the completion of the pending
command as well as signaled in a controller hardware event.  Examples of
the former are included in the patch changelogs.

Driver software is required to suspend the RNC in a "TX/RX Suspended"
condition before any outstanding commands can be terminated.  Failure to
guarantee this can lead to a complete hardware hang condition.  Earlier
versions of the driver software did not guarantee that an RNC was
correctly managed before I/O termination, and so operated in an unsafe
way.

Further, the driver performed unnecessary contortions to preserve the
remote device command state and so was more complicated than it needed
to be.  A simplifying driver assumption is that once an I/O has entered
the error handler path without having completed in the target, the
requirement on the driver is that all use of the sas_task must end.
Beyond that, recovery of operation is dependent on libsas and other
components to reset, rediscover and reconfigure the device before normal
operation can restart.  In the driver, this simplifying assumption meant
that the RNC management could be reduced to entry into the suspended
state, terminating the targeted I/O request, and resuming the RNC as
needed for device-specific management such as an SSP Abort Task or LUN
Reset Management request.
2012-05-21 12:17:30 +01:00
..
Makefile [SCSI] libfc: add some generic NPIV support routines to libfc 2009-12-04 12:00:56 -06:00
fc_disc.c [SCSI] libfc: Handle discovery failure during ctlr link down 2012-02-19 09:27:26 -06:00
fc_elsct.c [SCSI] libfc: Make the libfc Common Transport(CT) code generic 2012-02-19 08:08:58 -06:00
fc_exch.c [SCSI] libfc: fcoe_transport_create fails in single-CPU environment 2012-03-28 09:33:04 +01:00
fc_fcp.c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending 2012-03-22 12:38:04 -07:00
fc_frame.c include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 2010-03-30 22:02:32 +09:00
fc_libfc.c scsi: remove the second argument of k[un]map_atomic() 2012-03-20 21:48:19 +08:00
fc_libfc.h scsi: remove the second argument of k[un]map_atomic() 2012-03-20 21:48:19 +08:00
fc_lport.c isci update for 3.5 2012-05-21 12:17:30 +01:00
fc_npiv.c scsi: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required 2011-10-31 19:31:23 -04:00
fc_rport.c [SCSI] libfc: Declare local functions static 2012-01-16 12:45:48 +04:00