![]() For all JMicrons except for 361 and 368, AHCI mode enable bits in the Control(1) should be set. This used to be done in both ahci and pata_jmicron but while moving programming to PCI quirk, it was removed from ahci part while still left in pata_jmicron. The implemented JMicron PCI quirk was incorrect in that it didn't program AHCI mode enable bits. If pata_jmicron is loaded first and programs those bits, the ahci ports work; otherwise, ahci device detection fails miserably. This patch makes JMicron PCI quirk clear SATA IDE mode bits and set AHCI mode bits and remove the respective part from pata_jmicron. Tested on JMB361, 363 and 368. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> |
||
---|---|---|
.. | ||
hotplug | ||
pcie | ||
.gitignore | ||
Kconfig | ||
Makefile | ||
access.c | ||
bus.c | ||
hotplug.c | ||
htirq.c | ||
msi.c | ||
msi.h | ||
pci-acpi.c | ||
pci-driver.c | ||
pci-sysfs.c | ||
pci.c | ||
pci.h | ||
probe.c | ||
proc.c | ||
quirks.c | ||
remove.c | ||
rom.c | ||
search.c | ||
setup-bus.c | ||
setup-irq.c | ||
setup-res.c | ||
syscall.c |