linux/drivers/input/misc/ati_remote2.c

545 lines
13 KiB
C

/*
* ati_remote2 - ATI/Philips USB RF remote driver
*
* Copyright (C) 2005 Ville Syrjala <syrjala@sci.fi>
* Copyright (C) 2007 Peter Stokes <linux@dadeos.freeserve.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*/
#include <linux/usb/input.h>
#define DRIVER_DESC "ATI/Philips USB RF remote driver"
#define DRIVER_VERSION "0.2"
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
MODULE_LICENSE("GPL");
/*
* ATI Remote Wonder II Channel Configuration
*
* The remote control can by assigned one of sixteen "channels" in order to facilitate
* the use of multiple remote controls within range of each other.
* A remote's "channel" may be altered by pressing and holding the "PC" button for
* approximately 3 seconds, after which the button will slowly flash the count of the
* currently configured "channel", using the numeric keypad enter a number between 1 and
* 16 and then the "PC" button again, the button will slowly flash the count of the
* newly configured "channel".
*/
static unsigned int channel_mask = 0xFFFF;
module_param(channel_mask, uint, 0644);
MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
static unsigned int mode_mask = 0x1F;
module_param(mode_mask, uint, 0644);
MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
static struct usb_device_id ati_remote2_id_table[] = {
{ USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */
{ }
};
MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
static struct {
int hw_code;
int key_code;
} ati_remote2_key_table[] = {
{ 0x00, KEY_0 },
{ 0x01, KEY_1 },
{ 0x02, KEY_2 },
{ 0x03, KEY_3 },
{ 0x04, KEY_4 },
{ 0x05, KEY_5 },
{ 0x06, KEY_6 },
{ 0x07, KEY_7 },
{ 0x08, KEY_8 },
{ 0x09, KEY_9 },
{ 0x0c, KEY_POWER },
{ 0x0d, KEY_MUTE },
{ 0x10, KEY_VOLUMEUP },
{ 0x11, KEY_VOLUMEDOWN },
{ 0x20, KEY_CHANNELUP },
{ 0x21, KEY_CHANNELDOWN },
{ 0x28, KEY_FORWARD },
{ 0x29, KEY_REWIND },
{ 0x2c, KEY_PLAY },
{ 0x30, KEY_PAUSE },
{ 0x31, KEY_STOP },
{ 0x37, KEY_RECORD },
{ 0x38, KEY_DVD },
{ 0x39, KEY_TV },
{ 0x54, KEY_MENU },
{ 0x58, KEY_UP },
{ 0x59, KEY_DOWN },
{ 0x5a, KEY_LEFT },
{ 0x5b, KEY_RIGHT },
{ 0x5c, KEY_OK },
{ 0x78, KEY_A },
{ 0x79, KEY_B },
{ 0x7a, KEY_C },
{ 0x7b, KEY_D },
{ 0x7c, KEY_E },
{ 0x7d, KEY_F },
{ 0x82, KEY_ENTER },
{ 0x8e, KEY_VENDOR },
{ 0x96, KEY_COFFEE },
{ 0xa9, BTN_LEFT },
{ 0xaa, BTN_RIGHT },
{ 0xbe, KEY_QUESTION },
{ 0xd5, KEY_FRONT },
{ 0xd0, KEY_EDIT },
{ 0xf9, KEY_INFO },
{ (0x00 << 8) | 0x3f, KEY_PROG1 },
{ (0x01 << 8) | 0x3f, KEY_PROG2 },
{ (0x02 << 8) | 0x3f, KEY_PROG3 },
{ (0x03 << 8) | 0x3f, KEY_PROG4 },
{ (0x04 << 8) | 0x3f, KEY_PC },
{ 0, KEY_RESERVED }
};
struct ati_remote2 {
struct input_dev *idev;
struct usb_device *udev;
struct usb_interface *intf[2];
struct usb_endpoint_descriptor *ep[2];
struct urb *urb[2];
void *buf[2];
dma_addr_t buf_dma[2];
unsigned long jiffies;
int mode;
char name[64];
char phys[64];
};
static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
static void ati_remote2_disconnect(struct usb_interface *interface);
static struct usb_driver ati_remote2_driver = {
.name = "ati_remote2",
.probe = ati_remote2_probe,
.disconnect = ati_remote2_disconnect,
.id_table = ati_remote2_id_table,
};
static int ati_remote2_open(struct input_dev *idev)
{
struct ati_remote2 *ar2 = input_get_drvdata(idev);
int r;
r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
if (r) {
dev_err(&ar2->intf[0]->dev,
"%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
return r;
}
r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
if (r) {
usb_kill_urb(ar2->urb[0]);
dev_err(&ar2->intf[1]->dev,
"%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
return r;
}
return 0;
}
static void ati_remote2_close(struct input_dev *idev)
{
struct ati_remote2 *ar2 = input_get_drvdata(idev);
usb_kill_urb(ar2->urb[0]);
usb_kill_urb(ar2->urb[1]);
}
static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
{
struct input_dev *idev = ar2->idev;
u8 *data = ar2->buf[0];
int channel, mode;
channel = data[0] >> 4;
if (!((1 << channel) & channel_mask))
return;
mode = data[0] & 0x0F;
if (mode > 4) {
dev_err(&ar2->intf[0]->dev,
"Unknown mode byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
return;
}
if (!((1 << mode) & mode_mask))
return;
input_event(idev, EV_REL, REL_X, (s8) data[1]);
input_event(idev, EV_REL, REL_Y, (s8) data[2]);
input_sync(idev);
}
static int ati_remote2_lookup(unsigned int hw_code)
{
int i;
for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
if (ati_remote2_key_table[i].hw_code == hw_code)
return i;
return -1;
}
static void ati_remote2_input_key(struct ati_remote2 *ar2)
{
struct input_dev *idev = ar2->idev;
u8 *data = ar2->buf[1];
int channel, mode, hw_code, index;
channel = data[0] >> 4;
if (!((1 << channel) & channel_mask))
return;
mode = data[0] & 0x0F;
if (mode > 4) {
dev_err(&ar2->intf[1]->dev,
"Unknown mode byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
return;
}
hw_code = data[2];
/*
* Mode keys (AUX1-AUX4, PC) all generate the same code byte.
* Use the mode byte to figure out which one was pressed.
*/
if (hw_code == 0x3f) {
/*
* For some incomprehensible reason the mouse pad generates
* events which look identical to the events from the last
* pressed mode key. Naturally we don't want to generate key
* events for the mouse pad so we filter out any subsequent
* events from the same mode key.
*/
if (ar2->mode == mode)
return;
if (data[1] == 0)
ar2->mode = mode;
hw_code |= mode << 8;
}
if (!((1 << mode) & mode_mask))
return;
index = ati_remote2_lookup(hw_code);
if (index < 0) {
dev_err(&ar2->intf[1]->dev,
"Unknown code byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
return;
}
switch (data[1]) {
case 0: /* release */
break;
case 1: /* press */
ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
break;
case 2: /* repeat */
/* No repeat for mouse buttons. */
if (ati_remote2_key_table[index].key_code == BTN_LEFT ||
ati_remote2_key_table[index].key_code == BTN_RIGHT)
return;
if (!time_after_eq(jiffies, ar2->jiffies))
return;
ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]);
break;
default:
dev_err(&ar2->intf[1]->dev,
"Unknown state byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
return;
}
input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]);
input_sync(idev);
}
static void ati_remote2_complete_mouse(struct urb *urb)
{
struct ati_remote2 *ar2 = urb->context;
int r;
switch (urb->status) {
case 0:
ati_remote2_input_mouse(ar2);
break;
case -ENOENT:
case -EILSEQ:
case -ECONNRESET:
case -ESHUTDOWN:
dev_dbg(&ar2->intf[0]->dev,
"%s(): urb status = %d\n", __FUNCTION__, urb->status);
return;
default:
dev_err(&ar2->intf[0]->dev,
"%s(): urb status = %d\n", __FUNCTION__, urb->status);
}
r = usb_submit_urb(urb, GFP_ATOMIC);
if (r)
dev_err(&ar2->intf[0]->dev,
"%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
}
static void ati_remote2_complete_key(struct urb *urb)
{
struct ati_remote2 *ar2 = urb->context;
int r;
switch (urb->status) {
case 0:
ati_remote2_input_key(ar2);
break;
case -ENOENT:
case -EILSEQ:
case -ECONNRESET:
case -ESHUTDOWN:
dev_dbg(&ar2->intf[1]->dev,
"%s(): urb status = %d\n", __FUNCTION__, urb->status);
return;
default:
dev_err(&ar2->intf[1]->dev,
"%s(): urb status = %d\n", __FUNCTION__, urb->status);
}
r = usb_submit_urb(urb, GFP_ATOMIC);
if (r)
dev_err(&ar2->intf[1]->dev,
"%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
}
static int ati_remote2_input_init(struct ati_remote2 *ar2)
{
struct input_dev *idev;
int i, retval;
idev = input_allocate_device();
if (!idev)
return -ENOMEM;
ar2->idev = idev;
input_set_drvdata(idev, ar2);
idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT);
idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
set_bit(ati_remote2_key_table[i].key_code, idev->keybit);
idev->rep[REP_DELAY] = 250;
idev->rep[REP_PERIOD] = 33;
idev->open = ati_remote2_open;
idev->close = ati_remote2_close;
idev->name = ar2->name;
idev->phys = ar2->phys;
usb_to_input_id(ar2->udev, &idev->id);
idev->dev.parent = &ar2->udev->dev;
retval = input_register_device(idev);
if (retval)
input_free_device(idev);
return retval;
}
static int ati_remote2_urb_init(struct ati_remote2 *ar2)
{
struct usb_device *udev = ar2->udev;
int i, pipe, maxp;
for (i = 0; i < 2; i++) {
ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
if (!ar2->buf[i])
return -ENOMEM;
ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
if (!ar2->urb[i])
return -ENOMEM;
pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
maxp = maxp > 4 ? 4 : maxp;
usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
i ? ati_remote2_complete_key : ati_remote2_complete_mouse,
ar2, ar2->ep[i]->bInterval);
ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
}
return 0;
}
static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
{
int i;
for (i = 0; i < 2; i++) {
usb_free_urb(ar2->urb[i]);
usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
}
}
static int ati_remote2_setup(struct ati_remote2 *ar2)
{
int r, i, channel;
/*
* Configure receiver to only accept input from remote "channel"
* channel == 0 -> Accept input from any remote channel
* channel == 1 -> Only accept input from remote channel 1
* channel == 2 -> Only accept input from remote channel 2
* ...
* channel == 16 -> Only accept input from remote channel 16
*/
channel = 0;
for (i = 0; i < 16; i++) {
if ((1 << i) & channel_mask) {
if (!(~(1 << i) & 0xFFFF & channel_mask))
channel = i + 1;
break;
}
}
r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
0x20,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
if (r) {
dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
__FUNCTION__, r);
return r;
}
return 0;
}
static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(interface);
struct usb_host_interface *alt = interface->cur_altsetting;
struct ati_remote2 *ar2;
int r;
if (alt->desc.bInterfaceNumber)
return -ENODEV;
ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
if (!ar2)
return -ENOMEM;
ar2->udev = udev;
ar2->intf[0] = interface;
ar2->ep[0] = &alt->endpoint[0].desc;
ar2->intf[1] = usb_ifnum_to_if(udev, 1);
r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
if (r)
goto fail1;
alt = ar2->intf[1]->cur_altsetting;
ar2->ep[1] = &alt->endpoint[0].desc;
r = ati_remote2_urb_init(ar2);
if (r)
goto fail2;
r = ati_remote2_setup(ar2);
if (r)
goto fail2;
usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
r = ati_remote2_input_init(ar2);
if (r)
goto fail2;
usb_set_intfdata(interface, ar2);
return 0;
fail2:
ati_remote2_urb_cleanup(ar2);
usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
fail1:
kfree(ar2);
return r;
}
static void ati_remote2_disconnect(struct usb_interface *interface)
{
struct ati_remote2 *ar2;
struct usb_host_interface *alt = interface->cur_altsetting;
if (alt->desc.bInterfaceNumber)
return;
ar2 = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
input_unregister_device(ar2->idev);
ati_remote2_urb_cleanup(ar2);
usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
kfree(ar2);
}
static int __init ati_remote2_init(void)
{
int r;
r = usb_register(&ati_remote2_driver);
if (r)
printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r);
else
printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n");
return r;
}
static void __exit ati_remote2_exit(void)
{
usb_deregister(&ati_remote2_driver);
}
module_init(ati_remote2_init);
module_exit(ati_remote2_exit);