linux/drivers/net/atlx/atlx.c
Chris Snook 8ec7226a93 [netdrvr] atlx: code movement: move atl1 parameter parsing
Move some code from atlx.c to atl1.c to prevent build conflict with
the upcoming atl2 code.  No changes, just movement.

Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25 02:08:52 -04:00

256 lines
7.4 KiB
C

/* atlx.c -- common functions for Attansic network drivers
*
* Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
* Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
* Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
* Copyright(c) 2007 Atheros Corporation. All rights reserved.
*
* Derived from Intel e1000 driver
* Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/* Including this file like a header is a temporary hack, I promise. -- CHS */
#ifndef ATLX_C
#define ATLX_C
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/etherdevice.h>
#include <linux/if.h>
#include <linux/netdevice.h>
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/workqueue.h>
#include "atlx.h"
static struct atlx_spi_flash_dev flash_table[] = {
/* MFR_NAME WRSR READ PRGM WREN WRDI RDSR RDID SEC_ERS CHIP_ERS */
{"Atmel", 0x00, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62},
{"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60},
{"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7},
};
static int atlx_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
switch (cmd) {
case SIOCGMIIPHY:
case SIOCGMIIREG:
case SIOCSMIIREG:
return atlx_mii_ioctl(netdev, ifr, cmd);
default:
return -EOPNOTSUPP;
}
}
/*
* atlx_set_mac - Change the Ethernet Address of the NIC
* @netdev: network interface device structure
* @p: pointer to an address structure
*
* Returns 0 on success, negative on failure
*/
static int atlx_set_mac(struct net_device *netdev, void *p)
{
struct atlx_adapter *adapter = netdev_priv(netdev);
struct sockaddr *addr = p;
if (netif_running(netdev))
return -EBUSY;
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
atlx_set_mac_addr(&adapter->hw);
return 0;
}
static void atlx_check_for_link(struct atlx_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
u16 phy_data = 0;
spin_lock(&adapter->lock);
adapter->phy_timer_pending = false;
atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
spin_unlock(&adapter->lock);
/* notify upper layer link down ASAP */
if (!(phy_data & BMSR_LSTATUS)) {
/* Link Down */
if (netif_carrier_ok(netdev)) {
/* old link state: Up */
dev_info(&adapter->pdev->dev, "%s link is down\n",
netdev->name);
adapter->link_speed = SPEED_0;
netif_carrier_off(netdev);
netif_stop_queue(netdev);
}
}
schedule_work(&adapter->link_chg_task);
}
/*
* atlx_set_multi - Multicast and Promiscuous mode set
* @netdev: network interface device structure
*
* The set_multi entry point is called whenever the multicast address
* list or the network interface flags are updated. This routine is
* responsible for configuring the hardware for proper multicast,
* promiscuous mode, and all-multi behavior.
*/
static void atlx_set_multi(struct net_device *netdev)
{
struct atlx_adapter *adapter = netdev_priv(netdev);
struct atlx_hw *hw = &adapter->hw;
struct dev_mc_list *mc_ptr;
u32 rctl;
u32 hash_value;
/* Check for Promiscuous and All Multicast modes */
rctl = ioread32(hw->hw_addr + REG_MAC_CTRL);
if (netdev->flags & IFF_PROMISC)
rctl |= MAC_CTRL_PROMIS_EN;
else if (netdev->flags & IFF_ALLMULTI) {
rctl |= MAC_CTRL_MC_ALL_EN;
rctl &= ~MAC_CTRL_PROMIS_EN;
} else
rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
iowrite32(rctl, hw->hw_addr + REG_MAC_CTRL);
/* clear the old settings from the multicast hash table */
iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
/* compute mc addresses' hash value ,and put it into hash table */
for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
hash_value = atlx_hash_mc_addr(hw, mc_ptr->dmi_addr);
atlx_hash_set(hw, hash_value);
}
}
/*
* atlx_irq_enable - Enable default interrupt generation settings
* @adapter: board private structure
*/
static void atlx_irq_enable(struct atlx_adapter *adapter)
{
iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR);
ioread32(adapter->hw.hw_addr + REG_IMR);
}
/*
* atlx_irq_disable - Mask off interrupt generation on the NIC
* @adapter: board private structure
*/
static void atlx_irq_disable(struct atlx_adapter *adapter)
{
iowrite32(0, adapter->hw.hw_addr + REG_IMR);
ioread32(adapter->hw.hw_addr + REG_IMR);
synchronize_irq(adapter->pdev->irq);
}
static void atlx_clear_phy_int(struct atlx_adapter *adapter)
{
u16 phy_data;
unsigned long flags;
spin_lock_irqsave(&adapter->lock, flags);
atlx_read_phy_reg(&adapter->hw, 19, &phy_data);
spin_unlock_irqrestore(&adapter->lock, flags);
}
/*
* atlx_get_stats - Get System Network Statistics
* @netdev: network interface device structure
*
* Returns the address of the device statistics structure.
* The statistics are actually updated from the timer callback.
*/
static struct net_device_stats *atlx_get_stats(struct net_device *netdev)
{
struct atlx_adapter *adapter = netdev_priv(netdev);
return &adapter->net_stats;
}
/*
* atlx_tx_timeout - Respond to a Tx Hang
* @netdev: network interface device structure
*/
static void atlx_tx_timeout(struct net_device *netdev)
{
struct atlx_adapter *adapter = netdev_priv(netdev);
/* Do the reset outside of interrupt context */
schedule_work(&adapter->tx_timeout_task);
}
/*
* atlx_link_chg_task - deal with link change event Out of interrupt context
*/
static void atlx_link_chg_task(struct work_struct *work)
{
struct atlx_adapter *adapter;
unsigned long flags;
adapter = container_of(work, struct atlx_adapter, link_chg_task);
spin_lock_irqsave(&adapter->lock, flags);
atlx_check_link(adapter);
spin_unlock_irqrestore(&adapter->lock, flags);
}
static void atlx_vlan_rx_register(struct net_device *netdev,
struct vlan_group *grp)
{
struct atlx_adapter *adapter = netdev_priv(netdev);
unsigned long flags;
u32 ctrl;
spin_lock_irqsave(&adapter->lock, flags);
/* atlx_irq_disable(adapter); FIXME: confirm/remove */
adapter->vlgrp = grp;
if (grp) {
/* enable VLAN tag insert/strip */
ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL);
ctrl |= MAC_CTRL_RMV_VLAN;
iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL);
} else {
/* disable VLAN tag insert/strip */
ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL);
ctrl &= ~MAC_CTRL_RMV_VLAN;
iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL);
}
/* atlx_irq_enable(adapter); FIXME */
spin_unlock_irqrestore(&adapter->lock, flags);
}
static void atlx_restore_vlan(struct atlx_adapter *adapter)
{
atlx_vlan_rx_register(adapter->netdev, adapter->vlgrp);
}
#endif /* ATLX_C */