8f421c595a
Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
163 lines
4.6 KiB
Text
163 lines
4.6 KiB
Text
#
|
|
# EDAC Kconfig
|
|
# Copyright (c) 2003 Linux Networx
|
|
# Licensed and distributed under the GPL
|
|
#
|
|
|
|
menuconfig EDAC
|
|
bool "EDAC - error detection and reporting (EXPERIMENTAL)"
|
|
depends on HAS_IOMEM
|
|
depends on EXPERIMENTAL
|
|
depends on X86 || PPC
|
|
help
|
|
EDAC is designed to report errors in the core system.
|
|
These are low-level errors that are reported in the CPU or
|
|
supporting chipset or other subsystems:
|
|
memory errors, cache errors, PCI errors, thermal throttling, etc..
|
|
If unsure, select 'Y'.
|
|
|
|
If this code is reporting problems on your system, please
|
|
see the EDAC project web pages for more information at:
|
|
|
|
<http://bluesmoke.sourceforge.net/>
|
|
|
|
and:
|
|
|
|
<http://buttersideup.com/edacwiki>
|
|
|
|
There is also a mailing list for the EDAC project, which can
|
|
be found via the sourceforge page.
|
|
|
|
if EDAC
|
|
|
|
comment "Reporting subsystems"
|
|
|
|
config EDAC_DEBUG
|
|
bool "Debugging"
|
|
help
|
|
This turns on debugging information for the entire EDAC
|
|
sub-system. You can insert module with "debug_level=x", current
|
|
there're four debug levels (x=0,1,2,3 from low to high).
|
|
Usually you should select 'N'.
|
|
|
|
config EDAC_MM_EDAC
|
|
tristate "Main Memory EDAC (Error Detection And Correction) reporting"
|
|
default y
|
|
help
|
|
Some systems are able to detect and correct errors in main
|
|
memory. EDAC can report statistics on memory error
|
|
detection and correction (EDAC - or commonly referred to ECC
|
|
errors). EDAC will also try to decode where these errors
|
|
occurred so that a particular failing memory module can be
|
|
replaced. If unsure, select 'Y'.
|
|
|
|
|
|
config EDAC_AMD76X
|
|
tristate "AMD 76x (760, 762, 768)"
|
|
depends on EDAC_MM_EDAC && PCI && X86_32
|
|
help
|
|
Support for error detection and correction on the AMD 76x
|
|
series of chipsets used with the Athlon processor.
|
|
|
|
config EDAC_E7XXX
|
|
tristate "Intel e7xxx (e7205, e7500, e7501, e7505)"
|
|
depends on EDAC_MM_EDAC && PCI && X86_32
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
E7205, E7500, E7501 and E7505 server chipsets.
|
|
|
|
config EDAC_E752X
|
|
tristate "Intel e752x (e7520, e7525, e7320) and 3100"
|
|
depends on EDAC_MM_EDAC && PCI && X86 && HOTPLUG
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
E7520, E7525, E7320 server chipsets.
|
|
|
|
config EDAC_I82443BXGX
|
|
tristate "Intel 82443BX/GX (440BX/GX)"
|
|
depends on EDAC_MM_EDAC && PCI && X86_32
|
|
depends on BROKEN
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
82443BX/GX memory controllers (440BX/GX chipsets).
|
|
|
|
config EDAC_I82875P
|
|
tristate "Intel 82875p (D82875P, E7210)"
|
|
depends on EDAC_MM_EDAC && PCI && X86_32
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
DP82785P and E7210 server chipsets.
|
|
|
|
config EDAC_I82975X
|
|
tristate "Intel 82975x (D82975x)"
|
|
depends on EDAC_MM_EDAC && PCI && X86
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
DP82975x server chipsets.
|
|
|
|
config EDAC_I3000
|
|
tristate "Intel 3000/3010"
|
|
depends on EDAC_MM_EDAC && PCI && X86
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
3000 and 3010 server chipsets.
|
|
|
|
config EDAC_I82860
|
|
tristate "Intel 82860"
|
|
depends on EDAC_MM_EDAC && PCI && X86_32
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
82860 chipset.
|
|
|
|
config EDAC_R82600
|
|
tristate "Radisys 82600 embedded chipset"
|
|
depends on EDAC_MM_EDAC && PCI && X86_32
|
|
help
|
|
Support for error detection and correction on the Radisys
|
|
82600 embedded chipset.
|
|
|
|
config EDAC_I5000
|
|
tristate "Intel Greencreek/Blackford chipset"
|
|
depends on EDAC_MM_EDAC && X86 && PCI
|
|
help
|
|
Support for error detection and correction the Intel
|
|
Greekcreek/Blackford chipsets.
|
|
|
|
config EDAC_I5100
|
|
tristate "Intel San Clemente MCH"
|
|
depends on EDAC_MM_EDAC && X86 && PCI
|
|
help
|
|
Support for error detection and correction the Intel
|
|
San Clemente MCH.
|
|
|
|
config EDAC_MPC85XX
|
|
tristate "Freescale MPC85xx"
|
|
depends on EDAC_MM_EDAC && FSL_SOC && MPC85xx
|
|
help
|
|
Support for error detection and correction on the Freescale
|
|
MPC8560, MPC8540, MPC8548
|
|
|
|
config EDAC_MV64X60
|
|
tristate "Marvell MV64x60"
|
|
depends on EDAC_MM_EDAC && MV64X60
|
|
help
|
|
Support for error detection and correction on the Marvell
|
|
MV64360 and MV64460 chipsets.
|
|
|
|
config EDAC_PASEMI
|
|
tristate "PA Semi PWRficient"
|
|
depends on EDAC_MM_EDAC && PCI
|
|
depends on PPC_PASEMI
|
|
help
|
|
Support for error detection and correction on PA Semi
|
|
PWRficient.
|
|
|
|
config EDAC_CELL
|
|
tristate "Cell Broadband Engine memory controller"
|
|
depends on EDAC_MM_EDAC && PPC_CELL_NATIVE
|
|
help
|
|
Support for error detection and correction on the
|
|
Cell Broadband Engine internal memory controller
|
|
on platform without a hypervisor
|
|
|
|
endif # EDAC
|