linux/drivers/mfd/ucb1x00-core.c
Thomas Gleixner dace145374 [PATCH] irq-flags: misc drivers: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:50 -07:00

664 lines
16 KiB
C

/*
* linux/drivers/mfd/ucb1x00-core.c
*
* Copyright (C) 2001 Russell King, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*
* The UCB1x00 core driver provides basic services for handling IO,
* the ADC, interrupts, and accessing registers. It is designed
* such that everything goes through this layer, thereby providing
* a consistent locking methodology, as well as allowing the drivers
* to be used on other non-MCP-enabled hardware platforms.
*
* Note that all locks are private to this file. Nothing else may
* touch them.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/mutex.h>
#include <asm/dma.h>
#include <asm/hardware.h>
#include "ucb1x00.h"
static DEFINE_MUTEX(ucb1x00_mutex);
static LIST_HEAD(ucb1x00_drivers);
static LIST_HEAD(ucb1x00_devices);
/**
* ucb1x00_io_set_dir - set IO direction
* @ucb: UCB1x00 structure describing chip
* @in: bitfield of IO pins to be set as inputs
* @out: bitfield of IO pins to be set as outputs
*
* Set the IO direction of the ten general purpose IO pins on
* the UCB1x00 chip. The @in bitfield has priority over the
* @out bitfield, in that if you specify a pin as both input
* and output, it will end up as an input.
*
* ucb1x00_enable must have been called to enable the comms
* before using this function.
*
* This function takes a spinlock, disabling interrupts.
*/
void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int in, unsigned int out)
{
unsigned long flags;
spin_lock_irqsave(&ucb->io_lock, flags);
ucb->io_dir |= out;
ucb->io_dir &= ~in;
ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
spin_unlock_irqrestore(&ucb->io_lock, flags);
}
/**
* ucb1x00_io_write - set or clear IO outputs
* @ucb: UCB1x00 structure describing chip
* @set: bitfield of IO pins to set to logic '1'
* @clear: bitfield of IO pins to set to logic '0'
*
* Set the IO output state of the specified IO pins. The value
* is retained if the pins are subsequently configured as inputs.
* The @clear bitfield has priority over the @set bitfield -
* outputs will be cleared.
*
* ucb1x00_enable must have been called to enable the comms
* before using this function.
*
* This function takes a spinlock, disabling interrupts.
*/
void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int set, unsigned int clear)
{
unsigned long flags;
spin_lock_irqsave(&ucb->io_lock, flags);
ucb->io_out |= set;
ucb->io_out &= ~clear;
ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
spin_unlock_irqrestore(&ucb->io_lock, flags);
}
/**
* ucb1x00_io_read - read the current state of the IO pins
* @ucb: UCB1x00 structure describing chip
*
* Return a bitfield describing the logic state of the ten
* general purpose IO pins.
*
* ucb1x00_enable must have been called to enable the comms
* before using this function.
*
* This function does not take any semaphores or spinlocks.
*/
unsigned int ucb1x00_io_read(struct ucb1x00 *ucb)
{
return ucb1x00_reg_read(ucb, UCB_IO_DATA);
}
/*
* UCB1300 data sheet says we must:
* 1. enable ADC => 5us (including reference startup time)
* 2. select input => 51*tsibclk => 4.3us
* 3. start conversion => 102*tsibclk => 8.5us
* (tsibclk = 1/11981000)
* Period between SIB 128-bit frames = 10.7us
*/
/**
* ucb1x00_adc_enable - enable the ADC converter
* @ucb: UCB1x00 structure describing chip
*
* Enable the ucb1x00 and ADC converter on the UCB1x00 for use.
* Any code wishing to use the ADC converter must call this
* function prior to using it.
*
* This function takes the ADC semaphore to prevent two or more
* concurrent uses, and therefore may sleep. As a result, it
* can only be called from process context, not interrupt
* context.
*
* You should release the ADC as soon as possible using
* ucb1x00_adc_disable.
*/
void ucb1x00_adc_enable(struct ucb1x00 *ucb)
{
down(&ucb->adc_sem);
ucb->adc_cr |= UCB_ADC_ENA;
ucb1x00_enable(ucb);
ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr);
}
/**
* ucb1x00_adc_read - read the specified ADC channel
* @ucb: UCB1x00 structure describing chip
* @adc_channel: ADC channel mask
* @sync: wait for syncronisation pulse.
*
* Start an ADC conversion and wait for the result. Note that
* synchronised ADC conversions (via the ADCSYNC pin) must wait
* until the trigger is asserted and the conversion is finished.
*
* This function currently spins waiting for the conversion to
* complete (2 frames max without sync).
*
* If called for a synchronised ADC conversion, it may sleep
* with the ADC semaphore held.
*/
unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
{
unsigned int val;
if (sync)
adc_channel |= UCB_ADC_SYNC_ENA;
ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr | adc_channel);
ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr | adc_channel | UCB_ADC_START);
for (;;) {
val = ucb1x00_reg_read(ucb, UCB_ADC_DATA);
if (val & UCB_ADC_DAT_VAL)
break;
/* yield to other processes */
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(1);
}
return UCB_ADC_DAT(val);
}
/**
* ucb1x00_adc_disable - disable the ADC converter
* @ucb: UCB1x00 structure describing chip
*
* Disable the ADC converter and release the ADC semaphore.
*/
void ucb1x00_adc_disable(struct ucb1x00 *ucb)
{
ucb->adc_cr &= ~UCB_ADC_ENA;
ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr);
ucb1x00_disable(ucb);
up(&ucb->adc_sem);
}
/*
* UCB1x00 Interrupt handling.
*
* The UCB1x00 can generate interrupts when the SIBCLK is stopped.
* Since we need to read an internal register, we must re-enable
* SIBCLK to talk to the chip. We leave the clock running until
* we have finished processing all interrupts from the chip.
*/
static irqreturn_t ucb1x00_irq(int irqnr, void *devid, struct pt_regs *regs)
{
struct ucb1x00 *ucb = devid;
struct ucb1x00_irq *irq;
unsigned int isr, i;
ucb1x00_enable(ucb);
isr = ucb1x00_reg_read(ucb, UCB_IE_STATUS);
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, isr);
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
for (i = 0, irq = ucb->irq_handler; i < 16 && isr; i++, isr >>= 1, irq++)
if (isr & 1 && irq->fn)
irq->fn(i, irq->devid);
ucb1x00_disable(ucb);
return IRQ_HANDLED;
}
/**
* ucb1x00_hook_irq - hook a UCB1x00 interrupt
* @ucb: UCB1x00 structure describing chip
* @idx: interrupt index
* @fn: function to call when interrupt is triggered
* @devid: device id to pass to interrupt handler
*
* Hook the specified interrupt. You can only register one handler
* for each interrupt source. The interrupt source is not enabled
* by this function; use ucb1x00_enable_irq instead.
*
* Interrupt handlers will be called with other interrupts enabled.
*
* Returns zero on success, or one of the following errors:
* -EINVAL if the interrupt index is invalid
* -EBUSY if the interrupt has already been hooked
*/
int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid)
{
struct ucb1x00_irq *irq;
int ret = -EINVAL;
if (idx < 16) {
irq = ucb->irq_handler + idx;
ret = -EBUSY;
spin_lock_irq(&ucb->lock);
if (irq->fn == NULL) {
irq->devid = devid;
irq->fn = fn;
ret = 0;
}
spin_unlock_irq(&ucb->lock);
}
return ret;
}
/**
* ucb1x00_enable_irq - enable an UCB1x00 interrupt source
* @ucb: UCB1x00 structure describing chip
* @idx: interrupt index
* @edges: interrupt edges to enable
*
* Enable the specified interrupt to trigger on %UCB_RISING,
* %UCB_FALLING or both edges. The interrupt should have been
* hooked by ucb1x00_hook_irq.
*/
void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
{
unsigned long flags;
if (idx < 16) {
spin_lock_irqsave(&ucb->lock, flags);
ucb1x00_enable(ucb);
if (edges & UCB_RISING) {
ucb->irq_ris_enbl |= 1 << idx;
ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
}
if (edges & UCB_FALLING) {
ucb->irq_fal_enbl |= 1 << idx;
ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
}
ucb1x00_disable(ucb);
spin_unlock_irqrestore(&ucb->lock, flags);
}
}
/**
* ucb1x00_disable_irq - disable an UCB1x00 interrupt source
* @ucb: UCB1x00 structure describing chip
* @edges: interrupt edges to disable
*
* Disable the specified interrupt triggering on the specified
* (%UCB_RISING, %UCB_FALLING or both) edges.
*/
void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
{
unsigned long flags;
if (idx < 16) {
spin_lock_irqsave(&ucb->lock, flags);
ucb1x00_enable(ucb);
if (edges & UCB_RISING) {
ucb->irq_ris_enbl &= ~(1 << idx);
ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
}
if (edges & UCB_FALLING) {
ucb->irq_fal_enbl &= ~(1 << idx);
ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
}
ucb1x00_disable(ucb);
spin_unlock_irqrestore(&ucb->lock, flags);
}
}
/**
* ucb1x00_free_irq - disable and free the specified UCB1x00 interrupt
* @ucb: UCB1x00 structure describing chip
* @idx: interrupt index
* @devid: device id.
*
* Disable the interrupt source and remove the handler. devid must
* match the devid passed when hooking the interrupt.
*
* Returns zero on success, or one of the following errors:
* -EINVAL if the interrupt index is invalid
* -ENOENT if devid does not match
*/
int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid)
{
struct ucb1x00_irq *irq;
int ret;
if (idx >= 16)
goto bad;
irq = ucb->irq_handler + idx;
ret = -ENOENT;
spin_lock_irq(&ucb->lock);
if (irq->devid == devid) {
ucb->irq_ris_enbl &= ~(1 << idx);
ucb->irq_fal_enbl &= ~(1 << idx);
ucb1x00_enable(ucb);
ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
ucb1x00_disable(ucb);
irq->fn = NULL;
irq->devid = NULL;
ret = 0;
}
spin_unlock_irq(&ucb->lock);
return ret;
bad:
printk(KERN_ERR "Freeing bad UCB1x00 irq %d\n", idx);
return -EINVAL;
}
static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv)
{
struct ucb1x00_dev *dev;
int ret = -ENOMEM;
dev = kmalloc(sizeof(struct ucb1x00_dev), GFP_KERNEL);
if (dev) {
dev->ucb = ucb;
dev->drv = drv;
ret = drv->add(dev);
if (ret == 0) {
list_add(&dev->dev_node, &ucb->devs);
list_add(&dev->drv_node, &drv->devs);
} else {
kfree(dev);
}
}
return ret;
}
static void ucb1x00_remove_dev(struct ucb1x00_dev *dev)
{
dev->drv->remove(dev);
list_del(&dev->dev_node);
list_del(&dev->drv_node);
kfree(dev);
}
/*
* Try to probe our interrupt, rather than relying on lots of
* hard-coded machine dependencies. For reference, the expected
* IRQ mappings are:
*
* Machine Default IRQ
* adsbitsy IRQ_GPCIN4
* cerf IRQ_GPIO_UCB1200_IRQ
* flexanet IRQ_GPIO_GUI
* freebird IRQ_GPIO_FREEBIRD_UCB1300_IRQ
* graphicsclient ADS_EXT_IRQ(8)
* graphicsmaster ADS_EXT_IRQ(8)
* lart LART_IRQ_UCB1200
* omnimeter IRQ_GPIO23
* pfs168 IRQ_GPIO_UCB1300_IRQ
* simpad IRQ_GPIO_UCB1300_IRQ
* shannon SHANNON_IRQ_GPIO_IRQ_CODEC
* yopy IRQ_GPIO_UCB1200_IRQ
*/
static int ucb1x00_detect_irq(struct ucb1x00 *ucb)
{
unsigned long mask;
mask = probe_irq_on();
if (!mask) {
probe_irq_off(mask);
return NO_IRQ;
}
/*
* Enable the ADC interrupt.
*/
ucb1x00_reg_write(ucb, UCB_IE_RIS, UCB_IE_ADC);
ucb1x00_reg_write(ucb, UCB_IE_FAL, UCB_IE_ADC);
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
/*
* Cause an ADC interrupt.
*/
ucb1x00_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
ucb1x00_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
/*
* Wait for the conversion to complete.
*/
while ((ucb1x00_reg_read(ucb, UCB_ADC_DATA) & UCB_ADC_DAT_VAL) == 0);
ucb1x00_reg_write(ucb, UCB_ADC_CR, 0);
/*
* Disable and clear interrupt.
*/
ucb1x00_reg_write(ucb, UCB_IE_RIS, 0);
ucb1x00_reg_write(ucb, UCB_IE_FAL, 0);
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
/*
* Read triggered interrupt.
*/
return probe_irq_off(mask);
}
static void ucb1x00_release(struct class_device *dev)
{
struct ucb1x00 *ucb = classdev_to_ucb1x00(dev);
kfree(ucb);
}
static struct class ucb1x00_class = {
.name = "ucb1x00",
.release = ucb1x00_release,
};
static int ucb1x00_probe(struct mcp *mcp)
{
struct ucb1x00 *ucb;
struct ucb1x00_driver *drv;
unsigned int id;
int ret = -ENODEV;
mcp_enable(mcp);
id = mcp_reg_read(mcp, UCB_ID);
if (id != UCB_ID_1200 && id != UCB_ID_1300) {
printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
goto err_disable;
}
ucb = kmalloc(sizeof(struct ucb1x00), GFP_KERNEL);
ret = -ENOMEM;
if (!ucb)
goto err_disable;
memset(ucb, 0, sizeof(struct ucb1x00));
ucb->cdev.class = &ucb1x00_class;
ucb->cdev.dev = &mcp->attached_device;
strlcpy(ucb->cdev.class_id, "ucb1x00", sizeof(ucb->cdev.class_id));
spin_lock_init(&ucb->lock);
spin_lock_init(&ucb->io_lock);
sema_init(&ucb->adc_sem, 1);
ucb->id = id;
ucb->mcp = mcp;
ucb->irq = ucb1x00_detect_irq(ucb);
if (ucb->irq == NO_IRQ) {
printk(KERN_ERR "UCB1x00: IRQ probe failed\n");
ret = -ENODEV;
goto err_free;
}
ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
"UCB1x00", ucb);
if (ret) {
printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
ucb->irq, ret);
goto err_free;
}
mcp_set_drvdata(mcp, ucb);
ret = class_device_register(&ucb->cdev);
if (ret)
goto err_irq;
INIT_LIST_HEAD(&ucb->devs);
mutex_lock(&ucb1x00_mutex);
list_add(&ucb->node, &ucb1x00_devices);
list_for_each_entry(drv, &ucb1x00_drivers, node) {
ucb1x00_add_dev(ucb, drv);
}
mutex_unlock(&ucb1x00_mutex);
goto out;
err_irq:
free_irq(ucb->irq, ucb);
err_free:
kfree(ucb);
err_disable:
mcp_disable(mcp);
out:
return ret;
}
static void ucb1x00_remove(struct mcp *mcp)
{
struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
struct list_head *l, *n;
mutex_lock(&ucb1x00_mutex);
list_del(&ucb->node);
list_for_each_safe(l, n, &ucb->devs) {
struct ucb1x00_dev *dev = list_entry(l, struct ucb1x00_dev, dev_node);
ucb1x00_remove_dev(dev);
}
mutex_unlock(&ucb1x00_mutex);
free_irq(ucb->irq, ucb);
class_device_unregister(&ucb->cdev);
}
int ucb1x00_register_driver(struct ucb1x00_driver *drv)
{
struct ucb1x00 *ucb;
INIT_LIST_HEAD(&drv->devs);
mutex_lock(&ucb1x00_mutex);
list_add(&drv->node, &ucb1x00_drivers);
list_for_each_entry(ucb, &ucb1x00_devices, node) {
ucb1x00_add_dev(ucb, drv);
}
mutex_unlock(&ucb1x00_mutex);
return 0;
}
void ucb1x00_unregister_driver(struct ucb1x00_driver *drv)
{
struct list_head *n, *l;
mutex_lock(&ucb1x00_mutex);
list_del(&drv->node);
list_for_each_safe(l, n, &drv->devs) {
struct ucb1x00_dev *dev = list_entry(l, struct ucb1x00_dev, drv_node);
ucb1x00_remove_dev(dev);
}
mutex_unlock(&ucb1x00_mutex);
}
static int ucb1x00_suspend(struct mcp *mcp, pm_message_t state)
{
struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
struct ucb1x00_dev *dev;
mutex_lock(&ucb1x00_mutex);
list_for_each_entry(dev, &ucb->devs, dev_node) {
if (dev->drv->suspend)
dev->drv->suspend(dev, state);
}
mutex_unlock(&ucb1x00_mutex);
return 0;
}
static int ucb1x00_resume(struct mcp *mcp)
{
struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
struct ucb1x00_dev *dev;
mutex_lock(&ucb1x00_mutex);
list_for_each_entry(dev, &ucb->devs, dev_node) {
if (dev->drv->resume)
dev->drv->resume(dev);
}
mutex_unlock(&ucb1x00_mutex);
return 0;
}
static struct mcp_driver ucb1x00_driver = {
.drv = {
.name = "ucb1x00",
},
.probe = ucb1x00_probe,
.remove = ucb1x00_remove,
.suspend = ucb1x00_suspend,
.resume = ucb1x00_resume,
};
static int __init ucb1x00_init(void)
{
int ret = class_register(&ucb1x00_class);
if (ret == 0) {
ret = mcp_driver_register(&ucb1x00_driver);
if (ret)
class_unregister(&ucb1x00_class);
}
return ret;
}
static void __exit ucb1x00_exit(void)
{
mcp_driver_unregister(&ucb1x00_driver);
class_unregister(&ucb1x00_class);
}
module_init(ucb1x00_init);
module_exit(ucb1x00_exit);
EXPORT_SYMBOL(ucb1x00_io_set_dir);
EXPORT_SYMBOL(ucb1x00_io_write);
EXPORT_SYMBOL(ucb1x00_io_read);
EXPORT_SYMBOL(ucb1x00_adc_enable);
EXPORT_SYMBOL(ucb1x00_adc_read);
EXPORT_SYMBOL(ucb1x00_adc_disable);
EXPORT_SYMBOL(ucb1x00_hook_irq);
EXPORT_SYMBOL(ucb1x00_free_irq);
EXPORT_SYMBOL(ucb1x00_enable_irq);
EXPORT_SYMBOL(ucb1x00_disable_irq);
EXPORT_SYMBOL(ucb1x00_register_driver);
EXPORT_SYMBOL(ucb1x00_unregister_driver);
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
MODULE_DESCRIPTION("UCB1x00 core driver");
MODULE_LICENSE("GPL");