linux/drivers/input/misc/ad714x-i2c.c

139 lines
2.8 KiB
C

/*
* AD714X CapTouch Programmable Controller driver (I2C bus)
*
* Copyright 2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/input.h> /* BUS_I2C */
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/pm.h>
#include "ad714x.h"
#ifdef CONFIG_PM
static int ad714x_i2c_suspend(struct device *dev)
{
return ad714x_disable(i2c_get_clientdata(to_i2c_client(dev)));
}
static int ad714x_i2c_resume(struct device *dev)
{
return ad714x_enable(i2c_get_clientdata(to_i2c_client(dev)));
}
#endif
static SIMPLE_DEV_PM_OPS(ad714x_i2c_pm, ad714x_i2c_suspend, ad714x_i2c_resume);
static int ad714x_i2c_write(struct device *dev, unsigned short reg,
unsigned short data)
{
struct i2c_client *client = to_i2c_client(dev);
int ret = 0;
u8 *_reg = (u8 *)&reg;
u8 *_data = (u8 *)&data;
u8 tx[4] = {
_reg[1],
_reg[0],
_data[1],
_data[0]
};
ret = i2c_master_send(client, tx, 4);
if (ret < 0)
dev_err(&client->dev, "I2C write error\n");
return ret;
}
static int ad714x_i2c_read(struct device *dev, unsigned short reg,
unsigned short *data)
{
struct i2c_client *client = to_i2c_client(dev);
int ret = 0;
u8 *_reg = (u8 *)&reg;
u8 *_data = (u8 *)data;
u8 tx[2] = {
_reg[1],
_reg[0]
};
u8 rx[2];
ret = i2c_master_send(client, tx, 2);
if (ret >= 0)
ret = i2c_master_recv(client, rx, 2);
if (unlikely(ret < 0)) {
dev_err(&client->dev, "I2C read error\n");
} else {
_data[0] = rx[1];
_data[1] = rx[0];
}
return ret;
}
static int __devinit ad714x_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct ad714x_chip *chip;
chip = ad714x_probe(&client->dev, BUS_I2C, client->irq,
ad714x_i2c_read, ad714x_i2c_write);
if (IS_ERR(chip))
return PTR_ERR(chip);
i2c_set_clientdata(client, chip);
return 0;
}
static int __devexit ad714x_i2c_remove(struct i2c_client *client)
{
struct ad714x_chip *chip = i2c_get_clientdata(client);
ad714x_remove(chip);
return 0;
}
static const struct i2c_device_id ad714x_id[] = {
{ "ad7142_captouch", 0 },
{ "ad7143_captouch", 0 },
{ "ad7147_captouch", 0 },
{ "ad7147a_captouch", 0 },
{ "ad7148_captouch", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ad714x_id);
static struct i2c_driver ad714x_i2c_driver = {
.driver = {
.name = "ad714x_captouch",
.pm = &ad714x_i2c_pm,
},
.probe = ad714x_i2c_probe,
.remove = __devexit_p(ad714x_i2c_remove),
.id_table = ad714x_id,
};
static __init int ad714x_i2c_init(void)
{
return i2c_add_driver(&ad714x_i2c_driver);
}
module_init(ad714x_i2c_init);
static __exit void ad714x_i2c_exit(void)
{
i2c_del_driver(&ad714x_i2c_driver);
}
module_exit(ad714x_i2c_exit);
MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor I2C Bus Driver");
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_LICENSE("GPL");