linux/drivers/scsi/lpfc/lpfc_scsi.c
James Bottomley d3f46f39b7 [SCSI] remove use_sg_chaining
With the sg table code, every SCSI driver is now either chain capable
or broken (or has sg_tablesize set so chaining is never activated), so
there's no need to have a check in the host template.

Also tidy up the code by moving the scatterlist size defines into the
SCSI includes and permit the last entry of the scatterlist pools not
to be a power of two.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:14:02 -06:00

1486 lines
42 KiB
C

/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
* Copyright (C) 2004-2007 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
* modify it under the terms of version 2 of the GNU General *
* Public License as published by the Free Software Foundation. *
* This program is distributed in the hope that it will be useful. *
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
* TO BE LEGALLY INVALID. See the GNU General Public License for *
* more details, a copy of which can be found in the file COPYING *
* included with this package. *
*******************************************************************/
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport_fc.h>
#include "lpfc_version.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_vport.h"
#define LPFC_RESET_WAIT 2
#define LPFC_ABORT_WAIT 2
/*
* This function is called with no lock held when there is a resource
* error in driver or in firmware.
*/
void
lpfc_adjust_queue_depth(struct lpfc_hba *phba)
{
unsigned long flags;
spin_lock_irqsave(&phba->hbalock, flags);
atomic_inc(&phba->num_rsrc_err);
phba->last_rsrc_error_time = jiffies;
if ((phba->last_ramp_down_time + QUEUE_RAMP_DOWN_INTERVAL) > jiffies) {
spin_unlock_irqrestore(&phba->hbalock, flags);
return;
}
phba->last_ramp_down_time = jiffies;
spin_unlock_irqrestore(&phba->hbalock, flags);
spin_lock_irqsave(&phba->pport->work_port_lock, flags);
if ((phba->pport->work_port_events &
WORKER_RAMP_DOWN_QUEUE) == 0) {
phba->pport->work_port_events |= WORKER_RAMP_DOWN_QUEUE;
}
spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
spin_lock_irqsave(&phba->hbalock, flags);
if (phba->work_wait)
wake_up(phba->work_wait);
spin_unlock_irqrestore(&phba->hbalock, flags);
return;
}
/*
* This function is called with no lock held when there is a successful
* SCSI command completion.
*/
static inline void
lpfc_rampup_queue_depth(struct lpfc_vport *vport,
struct scsi_device *sdev)
{
unsigned long flags;
struct lpfc_hba *phba = vport->phba;
atomic_inc(&phba->num_cmd_success);
if (vport->cfg_lun_queue_depth <= sdev->queue_depth)
return;
spin_lock_irqsave(&phba->hbalock, flags);
if (((phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) > jiffies) ||
((phba->last_rsrc_error_time + QUEUE_RAMP_UP_INTERVAL ) > jiffies)) {
spin_unlock_irqrestore(&phba->hbalock, flags);
return;
}
phba->last_ramp_up_time = jiffies;
spin_unlock_irqrestore(&phba->hbalock, flags);
spin_lock_irqsave(&phba->pport->work_port_lock, flags);
if ((phba->pport->work_port_events &
WORKER_RAMP_UP_QUEUE) == 0) {
phba->pport->work_port_events |= WORKER_RAMP_UP_QUEUE;
}
spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
spin_lock_irqsave(&phba->hbalock, flags);
if (phba->work_wait)
wake_up(phba->work_wait);
spin_unlock_irqrestore(&phba->hbalock, flags);
}
void
lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
{
struct lpfc_vport **vports;
struct Scsi_Host *shost;
struct scsi_device *sdev;
unsigned long new_queue_depth;
unsigned long num_rsrc_err, num_cmd_success;
int i;
num_rsrc_err = atomic_read(&phba->num_rsrc_err);
num_cmd_success = atomic_read(&phba->num_cmd_success);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
shost = lpfc_shost_from_vport(vports[i]);
shost_for_each_device(sdev, shost) {
new_queue_depth =
sdev->queue_depth * num_rsrc_err /
(num_rsrc_err + num_cmd_success);
if (!new_queue_depth)
new_queue_depth = sdev->queue_depth - 1;
else
new_queue_depth = sdev->queue_depth -
new_queue_depth;
if (sdev->ordered_tags)
scsi_adjust_queue_depth(sdev,
MSG_ORDERED_TAG,
new_queue_depth);
else
scsi_adjust_queue_depth(sdev,
MSG_SIMPLE_TAG,
new_queue_depth);
}
}
lpfc_destroy_vport_work_array(phba, vports);
atomic_set(&phba->num_rsrc_err, 0);
atomic_set(&phba->num_cmd_success, 0);
}
void
lpfc_ramp_up_queue_handler(struct lpfc_hba *phba)
{
struct lpfc_vport **vports;
struct Scsi_Host *shost;
struct scsi_device *sdev;
int i;
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
shost = lpfc_shost_from_vport(vports[i]);
shost_for_each_device(sdev, shost) {
if (sdev->ordered_tags)
scsi_adjust_queue_depth(sdev,
MSG_ORDERED_TAG,
sdev->queue_depth+1);
else
scsi_adjust_queue_depth(sdev,
MSG_SIMPLE_TAG,
sdev->queue_depth+1);
}
}
lpfc_destroy_vport_work_array(phba, vports);
atomic_set(&phba->num_rsrc_err, 0);
atomic_set(&phba->num_cmd_success, 0);
}
/*
* This routine allocates a scsi buffer, which contains all the necessary
* information needed to initiate a SCSI I/O. The non-DMAable buffer region
* contains information to build the IOCB. The DMAable region contains
* memory for the FCP CMND, FCP RSP, and the inital BPL. In addition to
* allocating memeory, the FCP CMND and FCP RSP BDEs are setup in the BPL
* and the BPL BDE is setup in the IOCB.
*/
static struct lpfc_scsi_buf *
lpfc_new_scsi_buf(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_scsi_buf *psb;
struct ulp_bde64 *bpl;
IOCB_t *iocb;
dma_addr_t pdma_phys;
uint16_t iotag;
psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
if (!psb)
return NULL;
/*
* Get memory from the pci pool to map the virt space to pci bus space
* for an I/O. The DMA buffer includes space for the struct fcp_cmnd,
* struct fcp_rsp and the number of bde's necessary to support the
* sg_tablesize.
*/
psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, GFP_KERNEL,
&psb->dma_handle);
if (!psb->data) {
kfree(psb);
return NULL;
}
/* Initialize virtual ptrs to dma_buf region. */
memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
/* Allocate iotag for psb->cur_iocbq. */
iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
if (iotag == 0) {
pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
psb->data, psb->dma_handle);
kfree (psb);
return NULL;
}
psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
psb->fcp_cmnd = psb->data;
psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
sizeof(struct fcp_rsp);
/* Initialize local short-hand pointers. */
bpl = psb->fcp_bpl;
pdma_phys = psb->dma_handle;
/*
* The first two bdes are the FCP_CMD and FCP_RSP. The balance are sg
* list bdes. Initialize the first two and leave the rest for
* queuecommand.
*/
bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys));
bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys));
bpl->tus.f.bdeSize = sizeof (struct fcp_cmnd);
bpl->tus.f.bdeFlags = BUFF_USE_CMND;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
bpl++;
/* Setup the physical region for the FCP RSP */
pdma_phys += sizeof (struct fcp_cmnd);
bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys));
bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys));
bpl->tus.f.bdeSize = sizeof (struct fcp_rsp);
bpl->tus.f.bdeFlags = (BUFF_USE_CMND | BUFF_USE_RCV);
bpl->tus.w = le32_to_cpu(bpl->tus.w);
/*
* Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf,
* initialize it with all known data now.
*/
pdma_phys += (sizeof (struct fcp_rsp));
iocb = &psb->cur_iocbq.iocb;
iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys);
iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys);
iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof (struct ulp_bde64));
iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDL;
iocb->ulpBdeCount = 1;
iocb->ulpClass = CLASS3;
return psb;
}
static struct lpfc_scsi_buf*
lpfc_get_scsi_buf(struct lpfc_hba * phba)
{
struct lpfc_scsi_buf * lpfc_cmd = NULL;
struct list_head *scsi_buf_list = &phba->lpfc_scsi_buf_list;
unsigned long iflag = 0;
spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
list_remove_head(scsi_buf_list, lpfc_cmd, struct lpfc_scsi_buf, list);
if (lpfc_cmd) {
lpfc_cmd->seg_cnt = 0;
lpfc_cmd->nonsg_phys = 0;
}
spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
return lpfc_cmd;
}
static void
lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
{
unsigned long iflag = 0;
spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
psb->pCmd = NULL;
list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list);
spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
}
static int
lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
{
struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
struct scatterlist *sgel = NULL;
struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
dma_addr_t physaddr;
uint32_t i, num_bde = 0;
int nseg, datadir = scsi_cmnd->sc_data_direction;
/*
* There are three possibilities here - use scatter-gather segment, use
* the single mapping, or neither. Start the lpfc command prep by
* bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
* data bde entry.
*/
bpl += 2;
if (scsi_sg_count(scsi_cmnd)) {
/*
* The driver stores the segment count returned from pci_map_sg
* because this a count of dma-mappings used to map the use_sg
* pages. They are not guaranteed to be the same for those
* architectures that implement an IOMMU.
*/
nseg = dma_map_sg(&phba->pcidev->dev, scsi_sglist(scsi_cmnd),
scsi_sg_count(scsi_cmnd), datadir);
if (unlikely(!nseg))
return 1;
lpfc_cmd->seg_cnt = nseg;
if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
printk(KERN_ERR "%s: Too many sg segments from "
"dma_map_sg. Config %d, seg_cnt %d",
__FUNCTION__, phba->cfg_sg_seg_cnt,
lpfc_cmd->seg_cnt);
scsi_dma_unmap(scsi_cmnd);
return 1;
}
/*
* The driver established a maximum scatter-gather segment count
* during probe that limits the number of sg elements in any
* single scsi command. Just run through the seg_cnt and format
* the bde's.
*/
scsi_for_each_sg(scsi_cmnd, sgel, nseg, i) {
physaddr = sg_dma_address(sgel);
bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
bpl->tus.f.bdeSize = sg_dma_len(sgel);
if (datadir == DMA_TO_DEVICE)
bpl->tus.f.bdeFlags = 0;
else
bpl->tus.f.bdeFlags = BUFF_USE_RCV;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
bpl++;
num_bde++;
}
}
/*
* Finish initializing those IOCB fields that are dependent on the
* scsi_cmnd request_buffer. Note that the bdeSize is explicitly
* reinitialized since all iocb memory resources are used many times
* for transmit, receive, and continuation bpl's.
*/
iocb_cmd->un.fcpi64.bdl.bdeSize = (2 * sizeof (struct ulp_bde64));
iocb_cmd->un.fcpi64.bdl.bdeSize +=
(num_bde * sizeof (struct ulp_bde64));
iocb_cmd->ulpBdeCount = 1;
iocb_cmd->ulpLe = 1;
fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
return 0;
}
static void
lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
{
/*
* There are only two special cases to consider. (1) the scsi command
* requested scatter-gather usage or (2) the scsi command allocated
* a request buffer, but did not request use_sg. There is a third
* case, but it does not require resource deallocation.
*/
if (psb->seg_cnt > 0)
scsi_dma_unmap(psb->pCmd);
}
static void
lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
struct lpfc_iocbq *rsp_iocb)
{
struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
struct fcp_cmnd *fcpcmd = lpfc_cmd->fcp_cmnd;
struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm;
uint32_t resp_info = fcprsp->rspStatus2;
uint32_t scsi_status = fcprsp->rspStatus3;
uint32_t *lp;
uint32_t host_status = DID_OK;
uint32_t rsplen = 0;
uint32_t logit = LOG_FCP | LOG_FCP_ERROR;
/*
* If this is a task management command, there is no
* scsi packet associated with this lpfc_cmd. The driver
* consumes it.
*/
if (fcpcmd->fcpCntl2) {
scsi_status = 0;
goto out;
}
if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) {
uint32_t snslen = be32_to_cpu(fcprsp->rspSnsLen);
if (snslen > SCSI_SENSE_BUFFERSIZE)
snslen = SCSI_SENSE_BUFFERSIZE;
if (resp_info & RSP_LEN_VALID)
rsplen = be32_to_cpu(fcprsp->rspRspLen);
memcpy(cmnd->sense_buffer, &fcprsp->rspInfo0 + rsplen, snslen);
}
lp = (uint32_t *)cmnd->sense_buffer;
if (!scsi_status && (resp_info & RESID_UNDER))
logit = LOG_FCP;
lpfc_printf_vlog(vport, KERN_WARNING, logit,
"0730 FCP command x%x failed: x%x SNS x%x x%x "
"Data: x%x x%x x%x x%x x%x\n",
cmnd->cmnd[0], scsi_status,
be32_to_cpu(*lp), be32_to_cpu(*(lp + 3)), resp_info,
be32_to_cpu(fcprsp->rspResId),
be32_to_cpu(fcprsp->rspSnsLen),
be32_to_cpu(fcprsp->rspRspLen),
fcprsp->rspInfo3);
if (resp_info & RSP_LEN_VALID) {
rsplen = be32_to_cpu(fcprsp->rspRspLen);
if ((rsplen != 0 && rsplen != 4 && rsplen != 8) ||
(fcprsp->rspInfo3 != RSP_NO_FAILURE)) {
host_status = DID_ERROR;
goto out;
}
}
scsi_set_resid(cmnd, 0);
if (resp_info & RESID_UNDER) {
scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId));
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0716 FCP Read Underrun, expected %d, "
"residual %d Data: x%x x%x x%x\n",
be32_to_cpu(fcpcmd->fcpDl),
scsi_get_resid(cmnd), fcpi_parm, cmnd->cmnd[0],
cmnd->underflow);
/*
* If there is an under run check if under run reported by
* storage array is same as the under run reported by HBA.
* If this is not same, there is a dropped frame.
*/
if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) &&
fcpi_parm &&
(scsi_get_resid(cmnd) != fcpi_parm)) {
lpfc_printf_vlog(vport, KERN_WARNING,
LOG_FCP | LOG_FCP_ERROR,
"0735 FCP Read Check Error "
"and Underrun Data: x%x x%x x%x x%x\n",
be32_to_cpu(fcpcmd->fcpDl),
scsi_get_resid(cmnd), fcpi_parm,
cmnd->cmnd[0]);
scsi_set_resid(cmnd, scsi_bufflen(cmnd));
host_status = DID_ERROR;
}
/*
* The cmnd->underflow is the minimum number of bytes that must
* be transfered for this command. Provided a sense condition
* is not present, make sure the actual amount transferred is at
* least the underflow value or fail.
*/
if (!(resp_info & SNS_LEN_VALID) &&
(scsi_status == SAM_STAT_GOOD) &&
(scsi_bufflen(cmnd) - scsi_get_resid(cmnd)
< cmnd->underflow)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0717 FCP command x%x residual "
"underrun converted to error "
"Data: x%x x%x x%x\n",
cmnd->cmnd[0], scsi_bufflen(cmnd),
scsi_get_resid(cmnd), cmnd->underflow);
host_status = DID_ERROR;
}
} else if (resp_info & RESID_OVER) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
"0720 FCP command x%x residual overrun error. "
"Data: x%x x%x \n", cmnd->cmnd[0],
scsi_bufflen(cmnd), scsi_get_resid(cmnd));
host_status = DID_ERROR;
/*
* Check SLI validation that all the transfer was actually done
* (fcpi_parm should be zero). Apply check only to reads.
*/
} else if ((scsi_status == SAM_STAT_GOOD) && fcpi_parm &&
(cmnd->sc_data_direction == DMA_FROM_DEVICE)) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP | LOG_FCP_ERROR,
"0734 FCP Read Check Error Data: "
"x%x x%x x%x x%x\n",
be32_to_cpu(fcpcmd->fcpDl),
be32_to_cpu(fcprsp->rspResId),
fcpi_parm, cmnd->cmnd[0]);
host_status = DID_ERROR;
scsi_set_resid(cmnd, scsi_bufflen(cmnd));
}
out:
cmnd->result = ScsiResult(host_status, scsi_status);
}
static void
lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
struct lpfc_iocbq *pIocbOut)
{
struct lpfc_scsi_buf *lpfc_cmd =
(struct lpfc_scsi_buf *) pIocbIn->context1;
struct lpfc_vport *vport = pIocbIn->vport;
struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
struct lpfc_nodelist *pnode = rdata->pnode;
struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
int result;
struct scsi_device *sdev, *tmp_sdev;
int depth = 0;
unsigned long flags;
lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4];
lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
if (lpfc_cmd->status) {
if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT &&
(lpfc_cmd->result & IOERR_DRVR_MASK))
lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
else if (lpfc_cmd->status >= IOSTAT_CNT)
lpfc_cmd->status = IOSTAT_DEFAULT;
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
"0729 FCP cmd x%x failed <%d/%d> "
"status: x%x result: x%x Data: x%x x%x\n",
cmd->cmnd[0],
cmd->device ? cmd->device->id : 0xffff,
cmd->device ? cmd->device->lun : 0xffff,
lpfc_cmd->status, lpfc_cmd->result,
pIocbOut->iocb.ulpContext,
lpfc_cmd->cur_iocbq.iocb.ulpIoTag);
switch (lpfc_cmd->status) {
case IOSTAT_FCP_RSP_ERROR:
/* Call FCP RSP handler to determine result */
lpfc_handle_fcp_err(vport, lpfc_cmd, pIocbOut);
break;
case IOSTAT_NPORT_BSY:
case IOSTAT_FABRIC_BSY:
cmd->result = ScsiResult(DID_BUS_BUSY, 0);
break;
case IOSTAT_LOCAL_REJECT:
if (lpfc_cmd->result == RJT_UNAVAIL_PERM ||
lpfc_cmd->result == IOERR_NO_RESOURCES ||
lpfc_cmd->result == RJT_LOGIN_REQUIRED) {
cmd->result = ScsiResult(DID_REQUEUE, 0);
break;
} /* else: fall through */
default:
cmd->result = ScsiResult(DID_ERROR, 0);
break;
}
if ((pnode == NULL )
|| (pnode->nlp_state != NLP_STE_MAPPED_NODE))
cmd->result = ScsiResult(DID_BUS_BUSY, SAM_STAT_BUSY);
} else {
cmd->result = ScsiResult(DID_OK, 0);
}
if (cmd->result || lpfc_cmd->fcp_rsp->rspSnsLen) {
uint32_t *lp = (uint32_t *)cmd->sense_buffer;
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0710 Iodone <%d/%d> cmd %p, error "
"x%x SNS x%x x%x Data: x%x x%x\n",
cmd->device->id, cmd->device->lun, cmd,
cmd->result, *lp, *(lp + 3), cmd->retries,
scsi_get_resid(cmd));
}
result = cmd->result;
sdev = cmd->device;
lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
cmd->scsi_done(cmd);
if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
/*
* If there is a thread waiting for command completion
* wake up the thread.
*/
spin_lock_irqsave(sdev->host->host_lock, flags);
lpfc_cmd->pCmd = NULL;
if (lpfc_cmd->waitq)
wake_up(lpfc_cmd->waitq);
spin_unlock_irqrestore(sdev->host->host_lock, flags);
lpfc_release_scsi_buf(phba, lpfc_cmd);
return;
}
if (!result)
lpfc_rampup_queue_depth(vport, sdev);
if (!result && pnode != NULL &&
((jiffies - pnode->last_ramp_up_time) >
LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
((jiffies - pnode->last_q_full_time) >
LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
(vport->cfg_lun_queue_depth > sdev->queue_depth)) {
shost_for_each_device(tmp_sdev, sdev->host) {
if (vport->cfg_lun_queue_depth > tmp_sdev->queue_depth){
if (tmp_sdev->id != sdev->id)
continue;
if (tmp_sdev->ordered_tags)
scsi_adjust_queue_depth(tmp_sdev,
MSG_ORDERED_TAG,
tmp_sdev->queue_depth+1);
else
scsi_adjust_queue_depth(tmp_sdev,
MSG_SIMPLE_TAG,
tmp_sdev->queue_depth+1);
pnode->last_ramp_up_time = jiffies;
}
}
}
/*
* Check for queue full. If the lun is reporting queue full, then
* back off the lun queue depth to prevent target overloads.
*/
if (result == SAM_STAT_TASK_SET_FULL && pnode != NULL) {
pnode->last_q_full_time = jiffies;
shost_for_each_device(tmp_sdev, sdev->host) {
if (tmp_sdev->id != sdev->id)
continue;
depth = scsi_track_queue_full(tmp_sdev,
tmp_sdev->queue_depth - 1);
}
/*
* The queue depth cannot be lowered any more.
* Modify the returned error code to store
* the final depth value set by
* scsi_track_queue_full.
*/
if (depth == -1)
depth = sdev->host->cmd_per_lun;
if (depth) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
"0711 detected queue full - lun queue "
"depth adjusted to %d.\n", depth);
}
}
/*
* If there is a thread waiting for command completion
* wake up the thread.
*/
spin_lock_irqsave(sdev->host->host_lock, flags);
lpfc_cmd->pCmd = NULL;
if (lpfc_cmd->waitq)
wake_up(lpfc_cmd->waitq);
spin_unlock_irqrestore(sdev->host->host_lock, flags);
lpfc_release_scsi_buf(phba, lpfc_cmd);
}
static void
lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
struct lpfc_nodelist *pnode)
{
struct lpfc_hba *phba = vport->phba;
struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
struct lpfc_iocbq *piocbq = &(lpfc_cmd->cur_iocbq);
int datadir = scsi_cmnd->sc_data_direction;
char tag[2];
lpfc_cmd->fcp_rsp->rspSnsLen = 0;
/* clear task management bits */
lpfc_cmd->fcp_cmnd->fcpCntl2 = 0;
int_to_scsilun(lpfc_cmd->pCmd->device->lun,
&lpfc_cmd->fcp_cmnd->fcp_lun);
memcpy(&fcp_cmnd->fcpCdb[0], scsi_cmnd->cmnd, 16);
if (scsi_populate_tag_msg(scsi_cmnd, tag)) {
switch (tag[0]) {
case HEAD_OF_QUEUE_TAG:
fcp_cmnd->fcpCntl1 = HEAD_OF_Q;
break;
case ORDERED_QUEUE_TAG:
fcp_cmnd->fcpCntl1 = ORDERED_Q;
break;
default:
fcp_cmnd->fcpCntl1 = SIMPLE_Q;
break;
}
} else
fcp_cmnd->fcpCntl1 = 0;
/*
* There are three possibilities here - use scatter-gather segment, use
* the single mapping, or neither. Start the lpfc command prep by
* bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
* data bde entry.
*/
if (scsi_sg_count(scsi_cmnd)) {
if (datadir == DMA_TO_DEVICE) {
iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
iocb_cmd->un.fcpi.fcpi_parm = 0;
iocb_cmd->ulpPU = 0;
fcp_cmnd->fcpCntl3 = WRITE_DATA;
phba->fc4OutputRequests++;
} else {
iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;
iocb_cmd->ulpPU = PARM_READ_CHECK;
iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
fcp_cmnd->fcpCntl3 = READ_DATA;
phba->fc4InputRequests++;
}
} else {
iocb_cmd->ulpCommand = CMD_FCP_ICMND64_CR;
iocb_cmd->un.fcpi.fcpi_parm = 0;
iocb_cmd->ulpPU = 0;
fcp_cmnd->fcpCntl3 = 0;
phba->fc4ControlRequests++;
}
/*
* Finish initializing those IOCB fields that are independent
* of the scsi_cmnd request_buffer
*/
piocbq->iocb.ulpContext = pnode->nlp_rpi;
if (pnode->nlp_fcp_info & NLP_FCP_2_DEVICE)
piocbq->iocb.ulpFCP2Rcvy = 1;
else
piocbq->iocb.ulpFCP2Rcvy = 0;
piocbq->iocb.ulpClass = (pnode->nlp_fcp_info & 0x0f);
piocbq->context1 = lpfc_cmd;
piocbq->iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl;
piocbq->iocb.ulpTimeout = lpfc_cmd->timeout;
piocbq->vport = vport;
}
static int
lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
struct lpfc_scsi_buf *lpfc_cmd,
unsigned int lun,
uint8_t task_mgmt_cmd)
{
struct lpfc_iocbq *piocbq;
IOCB_t *piocb;
struct fcp_cmnd *fcp_cmnd;
struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
struct lpfc_nodelist *ndlp = rdata->pnode;
if ((ndlp == NULL) || (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) {
return 0;
}
piocbq = &(lpfc_cmd->cur_iocbq);
piocbq->vport = vport;
piocb = &piocbq->iocb;
fcp_cmnd = lpfc_cmd->fcp_cmnd;
int_to_scsilun(lun, &lpfc_cmd->fcp_cmnd->fcp_lun);
fcp_cmnd->fcpCntl2 = task_mgmt_cmd;
piocb->ulpCommand = CMD_FCP_ICMND64_CR;
piocb->ulpContext = ndlp->nlp_rpi;
if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) {
piocb->ulpFCP2Rcvy = 1;
}
piocb->ulpClass = (ndlp->nlp_fcp_info & 0x0f);
/* ulpTimeout is only one byte */
if (lpfc_cmd->timeout > 0xff) {
/*
* Do not timeout the command at the firmware level.
* The driver will provide the timeout mechanism.
*/
piocb->ulpTimeout = 0;
} else {
piocb->ulpTimeout = lpfc_cmd->timeout;
}
return 1;
}
static void
lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba,
struct lpfc_iocbq *cmdiocbq,
struct lpfc_iocbq *rspiocbq)
{
struct lpfc_scsi_buf *lpfc_cmd =
(struct lpfc_scsi_buf *) cmdiocbq->context1;
if (lpfc_cmd)
lpfc_release_scsi_buf(phba, lpfc_cmd);
return;
}
static int
lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
unsigned tgt_id, unsigned int lun,
struct lpfc_rport_data *rdata)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_iocbq *iocbq;
struct lpfc_iocbq *iocbqrsp;
int ret;
if (!rdata->pnode)
return FAILED;
lpfc_cmd->rdata = rdata;
ret = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
FCP_TARGET_RESET);
if (!ret)
return FAILED;
iocbq = &lpfc_cmd->cur_iocbq;
iocbqrsp = lpfc_sli_get_iocbq(phba);
if (!iocbqrsp)
return FAILED;
/* Issue Target Reset to TGT <num> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0702 Issue Target Reset to TGT %d Data: x%x x%x\n",
tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
ret = lpfc_sli_issue_iocb_wait(phba,
&phba->sli.ring[phba->sli.fcp_ring],
iocbq, iocbqrsp, lpfc_cmd->timeout);
if (ret != IOCB_SUCCESS) {
if (ret == IOCB_TIMEDOUT)
iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
} else {
ret = SUCCESS;
lpfc_cmd->result = iocbqrsp->iocb.un.ulpWord[4];
lpfc_cmd->status = iocbqrsp->iocb.ulpStatus;
if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT &&
(lpfc_cmd->result & IOERR_DRVR_MASK))
lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
}
lpfc_sli_release_iocbq(phba, iocbqrsp);
return ret;
}
const char *
lpfc_info(struct Scsi_Host *host)
{
struct lpfc_vport *vport = (struct lpfc_vport *) host->hostdata;
struct lpfc_hba *phba = vport->phba;
int len;
static char lpfcinfobuf[384];
memset(lpfcinfobuf,0,384);
if (phba && phba->pcidev){
strncpy(lpfcinfobuf, phba->ModelDesc, 256);
len = strlen(lpfcinfobuf);
snprintf(lpfcinfobuf + len,
384-len,
" on PCI bus %02x device %02x irq %d",
phba->pcidev->bus->number,
phba->pcidev->devfn,
phba->pcidev->irq);
len = strlen(lpfcinfobuf);
if (phba->Port[0]) {
snprintf(lpfcinfobuf + len,
384-len,
" port %s",
phba->Port);
}
}
return lpfcinfobuf;
}
static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba)
{
unsigned long poll_tmo_expires =
(jiffies + msecs_to_jiffies(phba->cfg_poll_tmo));
if (phba->sli.ring[LPFC_FCP_RING].txcmplq_cnt)
mod_timer(&phba->fcp_poll_timer,
poll_tmo_expires);
}
void lpfc_poll_start_timer(struct lpfc_hba * phba)
{
lpfc_poll_rearm_timer(phba);
}
void lpfc_poll_timeout(unsigned long ptr)
{
struct lpfc_hba *phba = (struct lpfc_hba *) ptr;
if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
lpfc_sli_poll_fcp_ring (phba);
if (phba->cfg_poll & DISABLE_FCP_RING_INT)
lpfc_poll_rearm_timer(phba);
}
}
static int
lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
{
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_sli *psli = &phba->sli;
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
struct lpfc_nodelist *ndlp = rdata->pnode;
struct lpfc_scsi_buf *lpfc_cmd;
struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
int err;
err = fc_remote_port_chkready(rport);
if (err) {
cmnd->result = err;
goto out_fail_command;
}
/*
* Catch race where our node has transitioned, but the
* transport is still transitioning.
*/
if (!ndlp) {
cmnd->result = ScsiResult(DID_BUS_BUSY, 0);
goto out_fail_command;
}
lpfc_cmd = lpfc_get_scsi_buf(phba);
if (lpfc_cmd == NULL) {
lpfc_adjust_queue_depth(phba);
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0707 driver's buffer pool is empty, "
"IO busied\n");
goto out_host_busy;
}
/*
* Store the midlayer's command structure for the completion phase
* and complete the command initialization.
*/
lpfc_cmd->pCmd = cmnd;
lpfc_cmd->rdata = rdata;
lpfc_cmd->timeout = 0;
cmnd->host_scribble = (unsigned char *)lpfc_cmd;
cmnd->scsi_done = done;
err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
if (err)
goto out_host_busy_free_buf;
lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
err = lpfc_sli_issue_iocb(phba, &phba->sli.ring[psli->fcp_ring],
&lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
if (err)
goto out_host_busy_free_buf;
if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
lpfc_sli_poll_fcp_ring(phba);
if (phba->cfg_poll & DISABLE_FCP_RING_INT)
lpfc_poll_rearm_timer(phba);
}
return 0;
out_host_busy_free_buf:
lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
lpfc_release_scsi_buf(phba, lpfc_cmd);
out_host_busy:
return SCSI_MLQUEUE_HOST_BUSY;
out_fail_command:
done(cmnd);
return 0;
}
static void
lpfc_block_error_handler(struct scsi_cmnd *cmnd)
{
struct Scsi_Host *shost = cmnd->device->host;
struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
spin_lock_irq(shost->host_lock);
while (rport->port_state == FC_PORTSTATE_BLOCKED) {
spin_unlock_irq(shost->host_lock);
msleep(1000);
spin_lock_irq(shost->host_lock);
}
spin_unlock_irq(shost->host_lock);
return;
}
static int
lpfc_abort_handler(struct scsi_cmnd *cmnd)
{
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_sli_ring *pring = &phba->sli.ring[phba->sli.fcp_ring];
struct lpfc_iocbq *iocb;
struct lpfc_iocbq *abtsiocb;
struct lpfc_scsi_buf *lpfc_cmd;
IOCB_t *cmd, *icmd;
int ret = SUCCESS;
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq);
lpfc_block_error_handler(cmnd);
lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble;
BUG_ON(!lpfc_cmd);
/*
* If pCmd field of the corresponding lpfc_scsi_buf structure
* points to a different SCSI command, then the driver has
* already completed this command, but the midlayer did not
* see the completion before the eh fired. Just return
* SUCCESS.
*/
iocb = &lpfc_cmd->cur_iocbq;
if (lpfc_cmd->pCmd != cmnd)
goto out;
BUG_ON(iocb->context1 != lpfc_cmd);
abtsiocb = lpfc_sli_get_iocbq(phba);
if (abtsiocb == NULL) {
ret = FAILED;
goto out;
}
/*
* The scsi command can not be in txq and it is in flight because the
* pCmd is still pointig at the SCSI command we have to abort. There
* is no need to search the txcmplq. Just send an abort to the FW.
*/
cmd = &iocb->iocb;
icmd = &abtsiocb->iocb;
icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
icmd->un.acxri.abortContextTag = cmd->ulpContext;
icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
icmd->ulpLe = 1;
icmd->ulpClass = cmd->ulpClass;
if (lpfc_is_link_up(phba))
icmd->ulpCommand = CMD_ABORT_XRI_CN;
else
icmd->ulpCommand = CMD_CLOSE_XRI_CN;
abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
abtsiocb->vport = vport;
if (lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0) == IOCB_ERROR) {
lpfc_sli_release_iocbq(phba, abtsiocb);
ret = FAILED;
goto out;
}
if (phba->cfg_poll & DISABLE_FCP_RING_INT)
lpfc_sli_poll_fcp_ring (phba);
lpfc_cmd->waitq = &waitq;
/* Wait for abort to complete */
wait_event_timeout(waitq,
(lpfc_cmd->pCmd != cmnd),
(2*vport->cfg_devloss_tmo*HZ));
spin_lock_irq(shost->host_lock);
lpfc_cmd->waitq = NULL;
spin_unlock_irq(shost->host_lock);
if (lpfc_cmd->pCmd == cmnd) {
ret = FAILED;
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0748 abort handler timed out waiting "
"for abort to complete: ret %#x, ID %d, "
"LUN %d, snum %#lx\n",
ret, cmnd->device->id, cmnd->device->lun,
cmnd->serial_number);
}
out:
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
"0749 SCSI Layer I/O Abort Request Status x%x ID %d "
"LUN %d snum %#lx\n", ret, cmnd->device->id,
cmnd->device->lun, cmnd->serial_number);
return ret;
}
static int
lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
{
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_scsi_buf *lpfc_cmd;
struct lpfc_iocbq *iocbq, *iocbqrsp;
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
struct lpfc_nodelist *pnode = rdata->pnode;
uint32_t cmd_result = 0, cmd_status = 0;
int ret = FAILED;
int iocb_status = IOCB_SUCCESS;
int cnt, loopcnt;
lpfc_block_error_handler(cmnd);
loopcnt = 0;
/*
* If target is not in a MAPPED state, delay the reset until
* target is rediscovered or devloss timeout expires.
*/
while (1) {
if (!pnode)
goto out;
if (pnode->nlp_state != NLP_STE_MAPPED_NODE) {
schedule_timeout_uninterruptible(msecs_to_jiffies(500));
loopcnt++;
rdata = cmnd->device->hostdata;
if (!rdata ||
(loopcnt > ((vport->cfg_devloss_tmo * 2) + 1))){
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0721 LUN Reset rport "
"failure: cnt x%x rdata x%p\n",
loopcnt, rdata);
goto out;
}
pnode = rdata->pnode;
if (!pnode)
goto out;
}
if (pnode->nlp_state == NLP_STE_MAPPED_NODE)
break;
}
lpfc_cmd = lpfc_get_scsi_buf(phba);
if (lpfc_cmd == NULL)
goto out;
lpfc_cmd->timeout = 60;
lpfc_cmd->rdata = rdata;
ret = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, cmnd->device->lun,
FCP_TARGET_RESET);
if (!ret)
goto out_free_scsi_buf;
iocbq = &lpfc_cmd->cur_iocbq;
/* get a buffer for this IOCB command response */
iocbqrsp = lpfc_sli_get_iocbq(phba);
if (iocbqrsp == NULL)
goto out_free_scsi_buf;
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0703 Issue target reset to TGT %d LUN %d "
"rpi x%x nlp_flag x%x\n", cmnd->device->id,
cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
iocb_status = lpfc_sli_issue_iocb_wait(phba,
&phba->sli.ring[phba->sli.fcp_ring],
iocbq, iocbqrsp, lpfc_cmd->timeout);
if (iocb_status == IOCB_TIMEDOUT)
iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
if (iocb_status == IOCB_SUCCESS)
ret = SUCCESS;
else
ret = iocb_status;
cmd_result = iocbqrsp->iocb.un.ulpWord[4];
cmd_status = iocbqrsp->iocb.ulpStatus;
lpfc_sli_release_iocbq(phba, iocbqrsp);
/*
* All outstanding txcmplq I/Os should have been aborted by the device.
* Unfortunately, some targets do not abide by this forcing the driver
* to double check.
*/
cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id, cmnd->device->lun,
LPFC_CTX_LUN);
if (cnt)
lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
cmnd->device->id, cmnd->device->lun,
LPFC_CTX_LUN);
loopcnt = 0;
while(cnt) {
schedule_timeout_uninterruptible(LPFC_RESET_WAIT*HZ);
if (++loopcnt
> (2 * vport->cfg_devloss_tmo)/LPFC_RESET_WAIT)
break;
cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id,
cmnd->device->lun, LPFC_CTX_LUN);
}
if (cnt) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0719 device reset I/O flush failure: "
"cnt x%x\n", cnt);
ret = FAILED;
}
out_free_scsi_buf:
if (iocb_status != IOCB_TIMEDOUT) {
lpfc_release_scsi_buf(phba, lpfc_cmd);
}
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0713 SCSI layer issued device reset (%d, %d) "
"return x%x status x%x result x%x\n",
cmnd->device->id, cmnd->device->lun, ret,
cmd_status, cmd_result);
out:
return ret;
}
static int
lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
{
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *ndlp = NULL;
int match;
int ret = FAILED, i, err_count = 0;
int cnt, loopcnt;
struct lpfc_scsi_buf * lpfc_cmd;
lpfc_block_error_handler(cmnd);
lpfc_cmd = lpfc_get_scsi_buf(phba);
if (lpfc_cmd == NULL)
goto out;
/* The lpfc_cmd storage is reused. Set all loop invariants. */
lpfc_cmd->timeout = 60;
/*
* Since the driver manages a single bus device, reset all
* targets known to the driver. Should any target reset
* fail, this routine returns failure to the midlayer.
*/
for (i = 0; i < LPFC_MAX_TARGET; i++) {
/* Search for mapped node by target ID */
match = 0;
spin_lock_irq(shost->host_lock);
list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&
i == ndlp->nlp_sid &&
ndlp->rport) {
match = 1;
break;
}
}
spin_unlock_irq(shost->host_lock);
if (!match)
continue;
ret = lpfc_scsi_tgt_reset(lpfc_cmd, vport, i,
cmnd->device->lun,
ndlp->rport->dd_data);
if (ret != SUCCESS) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0700 Bus Reset on target %d failed\n",
i);
err_count++;
break;
}
}
if (ret != IOCB_TIMEDOUT)
lpfc_release_scsi_buf(phba, lpfc_cmd);
if (err_count == 0)
ret = SUCCESS;
else
ret = FAILED;
/*
* All outstanding txcmplq I/Os should have been aborted by
* the targets. Unfortunately, some targets do not abide by
* this forcing the driver to double check.
*/
cnt = lpfc_sli_sum_iocb(vport, 0, 0, LPFC_CTX_HOST);
if (cnt)
lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
0, 0, LPFC_CTX_HOST);
loopcnt = 0;
while(cnt) {
schedule_timeout_uninterruptible(LPFC_RESET_WAIT*HZ);
if (++loopcnt
> (2 * vport->cfg_devloss_tmo)/LPFC_RESET_WAIT)
break;
cnt = lpfc_sli_sum_iocb(vport, 0, 0, LPFC_CTX_HOST);
}
if (cnt) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0715 Bus Reset I/O flush failure: "
"cnt x%x left x%x\n", cnt, i);
ret = FAILED;
}
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0714 SCSI layer issued Bus Reset Data: x%x\n", ret);
out:
return ret;
}
static int
lpfc_slave_alloc(struct scsi_device *sdev)
{
struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_scsi_buf *scsi_buf = NULL;
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
uint32_t total = 0, i;
uint32_t num_to_alloc = 0;
unsigned long flags;
if (!rport || fc_remote_port_chkready(rport))
return -ENXIO;
sdev->hostdata = rport->dd_data;
/*
* Populate the cmds_per_lun count scsi_bufs into this host's globally
* available list of scsi buffers. Don't allocate more than the
* HBA limit conveyed to the midlayer via the host structure. The
* formula accounts for the lun_queue_depth + error handlers + 1
* extra. This list of scsi bufs exists for the lifetime of the driver.
*/
total = phba->total_scsi_bufs;
num_to_alloc = vport->cfg_lun_queue_depth + 2;
/* Allow some exchanges to be available always to complete discovery */
if (total >= phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
"0704 At limitation of %d preallocated "
"command buffers\n", total);
return 0;
/* Allow some exchanges to be available always to complete discovery */
} else if (total + num_to_alloc >
phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
"0705 Allocation request of %d "
"command buffers will exceed max of %d. "
"Reducing allocation request to %d.\n",
num_to_alloc, phba->cfg_hba_queue_depth,
(phba->cfg_hba_queue_depth - total));
num_to_alloc = phba->cfg_hba_queue_depth - total;
}
for (i = 0; i < num_to_alloc; i++) {
scsi_buf = lpfc_new_scsi_buf(vport);
if (!scsi_buf) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0706 Failed to allocate "
"command buffer\n");
break;
}
spin_lock_irqsave(&phba->scsi_buf_list_lock, flags);
phba->total_scsi_bufs++;
list_add_tail(&scsi_buf->list, &phba->lpfc_scsi_buf_list);
spin_unlock_irqrestore(&phba->scsi_buf_list_lock, flags);
}
return 0;
}
static int
lpfc_slave_configure(struct scsi_device *sdev)
{
struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
struct lpfc_hba *phba = vport->phba;
struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
if (sdev->tagged_supported)
scsi_activate_tcq(sdev, vport->cfg_lun_queue_depth);
else
scsi_deactivate_tcq(sdev, vport->cfg_lun_queue_depth);
/*
* Initialize the fc transport attributes for the target
* containing this scsi device. Also note that the driver's
* target pointer is stored in the starget_data for the
* driver's sysfs entry point functions.
*/
rport->dev_loss_tmo = vport->cfg_devloss_tmo;
if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
lpfc_sli_poll_fcp_ring(phba);
if (phba->cfg_poll & DISABLE_FCP_RING_INT)
lpfc_poll_rearm_timer(phba);
}
return 0;
}
static void
lpfc_slave_destroy(struct scsi_device *sdev)
{
sdev->hostdata = NULL;
return;
}
struct scsi_host_template lpfc_template = {
.module = THIS_MODULE,
.name = LPFC_DRIVER_NAME,
.info = lpfc_info,
.queuecommand = lpfc_queuecommand,
.eh_abort_handler = lpfc_abort_handler,
.eh_device_reset_handler= lpfc_device_reset_handler,
.eh_bus_reset_handler = lpfc_bus_reset_handler,
.slave_alloc = lpfc_slave_alloc,
.slave_configure = lpfc_slave_configure,
.slave_destroy = lpfc_slave_destroy,
.scan_finished = lpfc_scan_finished,
.this_id = -1,
.sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT,
.cmd_per_lun = LPFC_CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = lpfc_hba_attrs,
.max_sectors = 0xFFFF,
};
struct scsi_host_template lpfc_vport_template = {
.module = THIS_MODULE,
.name = LPFC_DRIVER_NAME,
.info = lpfc_info,
.queuecommand = lpfc_queuecommand,
.eh_abort_handler = lpfc_abort_handler,
.eh_device_reset_handler= lpfc_device_reset_handler,
.eh_bus_reset_handler = lpfc_bus_reset_handler,
.slave_alloc = lpfc_slave_alloc,
.slave_configure = lpfc_slave_configure,
.slave_destroy = lpfc_slave_destroy,
.scan_finished = lpfc_scan_finished,
.this_id = -1,
.sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT,
.cmd_per_lun = LPFC_CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = lpfc_vport_attrs,
.max_sectors = 0xFFFF,
};