linux/drivers/char/tty_ioctl.c

1184 lines
30 KiB
C

/*
* linux/drivers/char/tty_ioctl.c
*
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*
* Modified by Fred N. van Kempen, 01/29/93, to add line disciplines
* which can be dynamically activated and de-activated by the line
* discipline handling modules (like SLIP).
*/
#include <linux/types.h>
#include <linux/termios.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/major.h>
#include <linux/tty.h>
#include <linux/fcntl.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
#include <linux/smp_lock.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#undef TTY_DEBUG_WAIT_UNTIL_SENT
#undef DEBUG
/*
* Internal flag options for termios setting behavior
*/
#define TERMIOS_FLUSH 1
#define TERMIOS_WAIT 2
#define TERMIOS_TERMIO 4
#define TERMIOS_OLD 8
/**
* tty_chars_in_buffer - characters pending
* @tty: terminal
*
* Return the number of bytes of data in the device private
* output queue. If no private method is supplied there is assumed
* to be no queue on the device.
*/
int tty_chars_in_buffer(struct tty_struct *tty)
{
if (tty->ops->chars_in_buffer)
return tty->ops->chars_in_buffer(tty);
else
return 0;
}
EXPORT_SYMBOL(tty_chars_in_buffer);
/**
* tty_write_room - write queue space
* @tty: terminal
*
* Return the number of bytes that can be queued to this device
* at the present time. The result should be treated as a guarantee
* and the driver cannot offer a value it later shrinks by more than
* the number of bytes written. If no method is provided 2K is always
* returned and data may be lost as there will be no flow control.
*/
int tty_write_room(struct tty_struct *tty)
{
if (tty->ops->write_room)
return tty->ops->write_room(tty);
return 2048;
}
EXPORT_SYMBOL(tty_write_room);
/**
* tty_driver_flush_buffer - discard internal buffer
* @tty: terminal
*
* Discard the internal output buffer for this device. If no method
* is provided then either the buffer cannot be hardware flushed or
* there is no buffer driver side.
*/
void tty_driver_flush_buffer(struct tty_struct *tty)
{
if (tty->ops->flush_buffer)
tty->ops->flush_buffer(tty);
}
EXPORT_SYMBOL(tty_driver_flush_buffer);
/**
* tty_throttle - flow control
* @tty: terminal
*
* Indicate that a tty should stop transmitting data down the stack.
*/
void tty_throttle(struct tty_struct *tty)
{
/* check TTY_THROTTLED first so it indicates our state */
if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) &&
tty->ops->throttle)
tty->ops->throttle(tty);
}
EXPORT_SYMBOL(tty_throttle);
/**
* tty_unthrottle - flow control
* @tty: terminal
*
* Indicate that a tty may continue transmitting data down the stack.
*/
void tty_unthrottle(struct tty_struct *tty)
{
if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) &&
tty->ops->unthrottle)
tty->ops->unthrottle(tty);
}
EXPORT_SYMBOL(tty_unthrottle);
/**
* tty_wait_until_sent - wait for I/O to finish
* @tty: tty we are waiting for
* @timeout: how long we will wait
*
* Wait for characters pending in a tty driver to hit the wire, or
* for a timeout to occur (eg due to flow control)
*
* Locking: none
*/
void tty_wait_until_sent(struct tty_struct *tty, long timeout)
{
#ifdef TTY_DEBUG_WAIT_UNTIL_SENT
char buf[64];
printk(KERN_DEBUG "%s wait until sent...\n", tty_name(tty, buf));
#endif
if (!timeout)
timeout = MAX_SCHEDULE_TIMEOUT;
if (wait_event_interruptible_timeout(tty->write_wait,
!tty_chars_in_buffer(tty), timeout) >= 0) {
if (tty->ops->wait_until_sent)
tty->ops->wait_until_sent(tty, timeout);
}
}
EXPORT_SYMBOL(tty_wait_until_sent);
/*
* Termios Helper Methods
*/
static void unset_locked_termios(struct ktermios *termios,
struct ktermios *old,
struct ktermios *locked)
{
int i;
#define NOSET_MASK(x, y, z) (x = ((x) & ~(z)) | ((y) & (z)))
if (!locked) {
printk(KERN_WARNING "Warning?!? termios_locked is NULL.\n");
return;
}
NOSET_MASK(termios->c_iflag, old->c_iflag, locked->c_iflag);
NOSET_MASK(termios->c_oflag, old->c_oflag, locked->c_oflag);
NOSET_MASK(termios->c_cflag, old->c_cflag, locked->c_cflag);
NOSET_MASK(termios->c_lflag, old->c_lflag, locked->c_lflag);
termios->c_line = locked->c_line ? old->c_line : termios->c_line;
for (i = 0; i < NCCS; i++)
termios->c_cc[i] = locked->c_cc[i] ?
old->c_cc[i] : termios->c_cc[i];
/* FIXME: What should we do for i/ospeed */
}
/*
* Routine which returns the baud rate of the tty
*
* Note that the baud_table needs to be kept in sync with the
* include/asm/termbits.h file.
*/
static const speed_t baud_table[] = {
0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
9600, 19200, 38400, 57600, 115200, 230400, 460800,
#ifdef __sparc__
76800, 153600, 307200, 614400, 921600
#else
500000, 576000, 921600, 1000000, 1152000, 1500000, 2000000,
2500000, 3000000, 3500000, 4000000
#endif
};
#ifndef __sparc__
static const tcflag_t baud_bits[] = {
B0, B50, B75, B110, B134, B150, B200, B300, B600,
B1200, B1800, B2400, B4800, B9600, B19200, B38400,
B57600, B115200, B230400, B460800, B500000, B576000,
B921600, B1000000, B1152000, B1500000, B2000000, B2500000,
B3000000, B3500000, B4000000
};
#else
static const tcflag_t baud_bits[] = {
B0, B50, B75, B110, B134, B150, B200, B300, B600,
B1200, B1800, B2400, B4800, B9600, B19200, B38400,
B57600, B115200, B230400, B460800, B76800, B153600,
B307200, B614400, B921600
};
#endif
static int n_baud_table = ARRAY_SIZE(baud_table);
/**
* tty_termios_baud_rate
* @termios: termios structure
*
* Convert termios baud rate data into a speed. This should be called
* with the termios lock held if this termios is a terminal termios
* structure. May change the termios data. Device drivers can call this
* function but should use ->c_[io]speed directly as they are updated.
*
* Locking: none
*/
speed_t tty_termios_baud_rate(struct ktermios *termios)
{
unsigned int cbaud;
cbaud = termios->c_cflag & CBAUD;
#ifdef BOTHER
/* Magic token for arbitary speed via c_ispeed/c_ospeed */
if (cbaud == BOTHER)
return termios->c_ospeed;
#endif
if (cbaud & CBAUDEX) {
cbaud &= ~CBAUDEX;
if (cbaud < 1 || cbaud + 15 > n_baud_table)
termios->c_cflag &= ~CBAUDEX;
else
cbaud += 15;
}
return baud_table[cbaud];
}
EXPORT_SYMBOL(tty_termios_baud_rate);
/**
* tty_termios_input_baud_rate
* @termios: termios structure
*
* Convert termios baud rate data into a speed. This should be called
* with the termios lock held if this termios is a terminal termios
* structure. May change the termios data. Device drivers can call this
* function but should use ->c_[io]speed directly as they are updated.
*
* Locking: none
*/
speed_t tty_termios_input_baud_rate(struct ktermios *termios)
{
#ifdef IBSHIFT
unsigned int cbaud = (termios->c_cflag >> IBSHIFT) & CBAUD;
if (cbaud == B0)
return tty_termios_baud_rate(termios);
/* Magic token for arbitary speed via c_ispeed*/
if (cbaud == BOTHER)
return termios->c_ispeed;
if (cbaud & CBAUDEX) {
cbaud &= ~CBAUDEX;
if (cbaud < 1 || cbaud + 15 > n_baud_table)
termios->c_cflag &= ~(CBAUDEX << IBSHIFT);
else
cbaud += 15;
}
return baud_table[cbaud];
#else
return tty_termios_baud_rate(termios);
#endif
}
EXPORT_SYMBOL(tty_termios_input_baud_rate);
/**
* tty_termios_encode_baud_rate
* @termios: ktermios structure holding user requested state
* @ispeed: input speed
* @ospeed: output speed
*
* Encode the speeds set into the passed termios structure. This is
* used as a library helper for drivers os that they can report back
* the actual speed selected when it differs from the speed requested
*
* For maximal back compatibility with legacy SYS5/POSIX *nix behaviour
* we need to carefully set the bits when the user does not get the
* desired speed. We allow small margins and preserve as much of possible
* of the input intent to keep compatiblity.
*
* Locking: Caller should hold termios lock. This is already held
* when calling this function from the driver termios handler.
*
* The ifdefs deal with platforms whose owners have yet to update them
* and will all go away once this is done.
*/
void tty_termios_encode_baud_rate(struct ktermios *termios,
speed_t ibaud, speed_t obaud)
{
int i = 0;
int ifound = -1, ofound = -1;
int iclose = ibaud/50, oclose = obaud/50;
int ibinput = 0;
if (obaud == 0) /* CD dropped */
ibaud = 0; /* Clear ibaud to be sure */
termios->c_ispeed = ibaud;
termios->c_ospeed = obaud;
#ifdef BOTHER
/* If the user asked for a precise weird speed give a precise weird
answer. If they asked for a Bfoo speed they many have problems
digesting non-exact replies so fuzz a bit */
if ((termios->c_cflag & CBAUD) == BOTHER)
oclose = 0;
if (((termios->c_cflag >> IBSHIFT) & CBAUD) == BOTHER)
iclose = 0;
if ((termios->c_cflag >> IBSHIFT) & CBAUD)
ibinput = 1; /* An input speed was specified */
#endif
termios->c_cflag &= ~CBAUD;
/*
* Our goal is to find a close match to the standard baud rate
* returned. Walk the baud rate table and if we get a very close
* match then report back the speed as a POSIX Bxxxx value by
* preference
*/
do {
if (obaud - oclose <= baud_table[i] &&
obaud + oclose >= baud_table[i]) {
termios->c_cflag |= baud_bits[i];
ofound = i;
}
if (ibaud - iclose <= baud_table[i] &&
ibaud + iclose >= baud_table[i]) {
/* For the case input == output don't set IBAUD bits
if the user didn't do so */
if (ofound == i && !ibinput)
ifound = i;
#ifdef IBSHIFT
else {
ifound = i;
termios->c_cflag |= (baud_bits[i] << IBSHIFT);
}
#endif
}
} while (++i < n_baud_table);
/*
* If we found no match then use BOTHER if provided or warn
* the user their platform maintainer needs to wake up if not.
*/
#ifdef BOTHER
if (ofound == -1)
termios->c_cflag |= BOTHER;
/* Set exact input bits only if the input and output differ or the
user already did */
if (ifound == -1 && (ibaud != obaud || ibinput))
termios->c_cflag |= (BOTHER << IBSHIFT);
#else
if (ifound == -1 || ofound == -1) {
static int warned;
if (!warned++)
printk(KERN_WARNING "tty: Unable to return correct "
"speed data as your architecture needs updating.\n");
}
#endif
}
EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate);
/**
* tty_encode_baud_rate - set baud rate of the tty
* @ibaud: input baud rate
* @obad: output baud rate
*
* Update the current termios data for the tty with the new speed
* settings. The caller must hold the termios_mutex for the tty in
* question.
*/
void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud)
{
tty_termios_encode_baud_rate(tty->termios, ibaud, obaud);
}
EXPORT_SYMBOL_GPL(tty_encode_baud_rate);
/**
* tty_get_baud_rate - get tty bit rates
* @tty: tty to query
*
* Returns the baud rate as an integer for this terminal. The
* termios lock must be held by the caller and the terminal bit
* flags may be updated.
*
* Locking: none
*/
speed_t tty_get_baud_rate(struct tty_struct *tty)
{
speed_t baud = tty_termios_baud_rate(tty->termios);
if (baud == 38400 && tty->alt_speed) {
if (!tty->warned) {
printk(KERN_WARNING "Use of setserial/setrocket to "
"set SPD_* flags is deprecated\n");
tty->warned = 1;
}
baud = tty->alt_speed;
}
return baud;
}
EXPORT_SYMBOL(tty_get_baud_rate);
/**
* tty_termios_copy_hw - copy hardware settings
* @new: New termios
* @old: Old termios
*
* Propogate the hardware specific terminal setting bits from
* the old termios structure to the new one. This is used in cases
* where the hardware does not support reconfiguration or as a helper
* in some cases where only minimal reconfiguration is supported
*/
void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old)
{
/* The bits a dumb device handles in software. Smart devices need
to always provide a set_termios method */
new->c_cflag &= HUPCL | CREAD | CLOCAL;
new->c_cflag |= old->c_cflag & ~(HUPCL | CREAD | CLOCAL);
new->c_ispeed = old->c_ispeed;
new->c_ospeed = old->c_ospeed;
}
EXPORT_SYMBOL(tty_termios_copy_hw);
/**
* tty_termios_hw_change - check for setting change
* @a: termios
* @b: termios to compare
*
* Check if any of the bits that affect a dumb device have changed
* between the two termios structures, or a speed change is needed.
*/
int tty_termios_hw_change(struct ktermios *a, struct ktermios *b)
{
if (a->c_ispeed != b->c_ispeed || a->c_ospeed != b->c_ospeed)
return 1;
if ((a->c_cflag ^ b->c_cflag) & ~(HUPCL | CREAD | CLOCAL))
return 1;
return 0;
}
EXPORT_SYMBOL(tty_termios_hw_change);
/**
* change_termios - update termios values
* @tty: tty to update
* @new_termios: desired new value
*
* Perform updates to the termios values set on this terminal. There
* is a bit of layering violation here with n_tty in terms of the
* internal knowledge of this function.
*
* Locking: termios_mutex
*/
static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
{
int canon_change;
struct ktermios old_termios;
struct tty_ldisc *ld;
unsigned long flags;
/*
* Perform the actual termios internal changes under lock.
*/
/* FIXME: we need to decide on some locking/ordering semantics
for the set_termios notification eventually */
mutex_lock(&tty->termios_mutex);
old_termios = *tty->termios;
*tty->termios = *new_termios;
unset_locked_termios(tty->termios, &old_termios, tty->termios_locked);
canon_change = (old_termios.c_lflag ^ tty->termios->c_lflag) & ICANON;
if (canon_change) {
memset(&tty->read_flags, 0, sizeof tty->read_flags);
tty->canon_head = tty->read_tail;
tty->canon_data = 0;
tty->erasing = 0;
}
/* This bit should be in the ldisc code */
if (canon_change && !L_ICANON(tty) && tty->read_cnt)
/* Get characters left over from canonical mode. */
wake_up_interruptible(&tty->read_wait);
/* See if packet mode change of state. */
if (tty->link && tty->link->packet) {
int old_flow = ((old_termios.c_iflag & IXON) &&
(old_termios.c_cc[VSTOP] == '\023') &&
(old_termios.c_cc[VSTART] == '\021'));
int new_flow = (I_IXON(tty) &&
STOP_CHAR(tty) == '\023' &&
START_CHAR(tty) == '\021');
if (old_flow != new_flow) {
spin_lock_irqsave(&tty->ctrl_lock, flags);
tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP);
if (new_flow)
tty->ctrl_status |= TIOCPKT_DOSTOP;
else
tty->ctrl_status |= TIOCPKT_NOSTOP;
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
wake_up_interruptible(&tty->link->read_wait);
}
}
if (tty->ops->set_termios)
(*tty->ops->set_termios)(tty, &old_termios);
else
tty_termios_copy_hw(tty->termios, &old_termios);
ld = tty_ldisc_ref(tty);
if (ld != NULL) {
if (ld->ops->set_termios)
(ld->ops->set_termios)(tty, &old_termios);
tty_ldisc_deref(ld);
}
mutex_unlock(&tty->termios_mutex);
}
/**
* set_termios - set termios values for a tty
* @tty: terminal device
* @arg: user data
* @opt: option information
*
* Helper function to prepare termios data and run necessary other
* functions before using change_termios to do the actual changes.
*
* Locking:
* Called functions take ldisc and termios_mutex locks
*/
static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
{
struct ktermios tmp_termios;
struct tty_ldisc *ld;
int retval = tty_check_change(tty);
if (retval)
return retval;
mutex_lock(&tty->termios_mutex);
memcpy(&tmp_termios, tty->termios, sizeof(struct ktermios));
mutex_unlock(&tty->termios_mutex);
if (opt & TERMIOS_TERMIO) {
if (user_termio_to_kernel_termios(&tmp_termios,
(struct termio __user *)arg))
return -EFAULT;
#ifdef TCGETS2
} else if (opt & TERMIOS_OLD) {
if (user_termios_to_kernel_termios_1(&tmp_termios,
(struct termios __user *)arg))
return -EFAULT;
} else {
if (user_termios_to_kernel_termios(&tmp_termios,
(struct termios2 __user *)arg))
return -EFAULT;
}
#else
} else if (user_termios_to_kernel_termios(&tmp_termios,
(struct termios __user *)arg))
return -EFAULT;
#endif
/* If old style Bfoo values are used then load c_ispeed/c_ospeed
* with the real speed so its unconditionally usable */
tmp_termios.c_ispeed = tty_termios_input_baud_rate(&tmp_termios);
tmp_termios.c_ospeed = tty_termios_baud_rate(&tmp_termios);
ld = tty_ldisc_ref(tty);
if (ld != NULL) {
if ((opt & TERMIOS_FLUSH) && ld->ops->flush_buffer)
ld->ops->flush_buffer(tty);
tty_ldisc_deref(ld);
}
if (opt & TERMIOS_WAIT) {
tty_wait_until_sent(tty, 0);
if (signal_pending(current))
return -EINTR;
}
change_termios(tty, &tmp_termios);
/* FIXME: Arguably if tmp_termios == tty->termios AND the
actual requested termios was not tmp_termios then we may
want to return an error as no user requested change has
succeeded */
return 0;
}
static int get_termio(struct tty_struct *tty, struct termio __user *termio)
{
if (kernel_termios_to_user_termio(termio, tty->termios))
return -EFAULT;
return 0;
}
#ifdef TCGETX
/**
* set_termiox - set termiox fields if possible
* @tty: terminal
* @arg: termiox structure from user
* @opt: option flags for ioctl type
*
* Implement the device calling points for the SYS5 termiox ioctl
* interface in Linux
*/
static int set_termiox(struct tty_struct *tty, void __user *arg, int opt)
{
struct termiox tnew;
struct tty_ldisc *ld;
if (tty->termiox == NULL)
return -EINVAL;
if (copy_from_user(&tnew, arg, sizeof(struct termiox)))
return -EFAULT;
ld = tty_ldisc_ref(tty);
if (ld != NULL) {
if ((opt & TERMIOS_FLUSH) && ld->ops->flush_buffer)
ld->ops->flush_buffer(tty);
tty_ldisc_deref(ld);
}
if (opt & TERMIOS_WAIT) {
tty_wait_until_sent(tty, 0);
if (signal_pending(current))
return -EINTR;
}
mutex_lock(&tty->termios_mutex);
if (tty->ops->set_termiox)
tty->ops->set_termiox(tty, &tnew);
mutex_unlock(&tty->termios_mutex);
return 0;
}
#endif
static unsigned long inq_canon(struct tty_struct *tty)
{
int nr, head, tail;
if (!tty->canon_data || !tty->read_buf)
return 0;
head = tty->canon_head;
tail = tty->read_tail;
nr = (head - tail) & (N_TTY_BUF_SIZE-1);
/* Skip EOF-chars.. */
while (head != tail) {
if (test_bit(tail, tty->read_flags) &&
tty->read_buf[tail] == __DISABLED_CHAR)
nr--;
tail = (tail+1) & (N_TTY_BUF_SIZE-1);
}
return nr;
}
#ifdef TIOCGETP
/*
* These are deprecated, but there is limited support..
*
* The "sg_flags" translation is a joke..
*/
static int get_sgflags(struct tty_struct *tty)
{
int flags = 0;
if (!(tty->termios->c_lflag & ICANON)) {
if (tty->termios->c_lflag & ISIG)
flags |= 0x02; /* cbreak */
else
flags |= 0x20; /* raw */
}
if (tty->termios->c_lflag & ECHO)
flags |= 0x08; /* echo */
if (tty->termios->c_oflag & OPOST)
if (tty->termios->c_oflag & ONLCR)
flags |= 0x10; /* crmod */
return flags;
}
static int get_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
{
struct sgttyb tmp;
mutex_lock(&tty->termios_mutex);
tmp.sg_ispeed = tty->termios->c_ispeed;
tmp.sg_ospeed = tty->termios->c_ospeed;
tmp.sg_erase = tty->termios->c_cc[VERASE];
tmp.sg_kill = tty->termios->c_cc[VKILL];
tmp.sg_flags = get_sgflags(tty);
mutex_unlock(&tty->termios_mutex);
return copy_to_user(sgttyb, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
static void set_sgflags(struct ktermios *termios, int flags)
{
termios->c_iflag = ICRNL | IXON;
termios->c_oflag = 0;
termios->c_lflag = ISIG | ICANON;
if (flags & 0x02) { /* cbreak */
termios->c_iflag = 0;
termios->c_lflag &= ~ICANON;
}
if (flags & 0x08) { /* echo */
termios->c_lflag |= ECHO | ECHOE | ECHOK |
ECHOCTL | ECHOKE | IEXTEN;
}
if (flags & 0x10) { /* crmod */
termios->c_oflag |= OPOST | ONLCR;
}
if (flags & 0x20) { /* raw */
termios->c_iflag = 0;
termios->c_lflag &= ~(ISIG | ICANON);
}
if (!(termios->c_lflag & ICANON)) {
termios->c_cc[VMIN] = 1;
termios->c_cc[VTIME] = 0;
}
}
/**
* set_sgttyb - set legacy terminal values
* @tty: tty structure
* @sgttyb: pointer to old style terminal structure
*
* Updates a terminal from the legacy BSD style terminal information
* structure.
*
* Locking: termios_mutex
*/
static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
{
int retval;
struct sgttyb tmp;
struct ktermios termios;
retval = tty_check_change(tty);
if (retval)
return retval;
if (copy_from_user(&tmp, sgttyb, sizeof(tmp)))
return -EFAULT;
mutex_lock(&tty->termios_mutex);
termios = *tty->termios;
termios.c_cc[VERASE] = tmp.sg_erase;
termios.c_cc[VKILL] = tmp.sg_kill;
set_sgflags(&termios, tmp.sg_flags);
/* Try and encode into Bfoo format */
#ifdef BOTHER
tty_termios_encode_baud_rate(&termios, termios.c_ispeed,
termios.c_ospeed);
#endif
mutex_unlock(&tty->termios_mutex);
change_termios(tty, &termios);
return 0;
}
#endif
#ifdef TIOCGETC
static int get_tchars(struct tty_struct *tty, struct tchars __user *tchars)
{
struct tchars tmp;
mutex_lock(&tty->termios_mutex);
tmp.t_intrc = tty->termios->c_cc[VINTR];
tmp.t_quitc = tty->termios->c_cc[VQUIT];
tmp.t_startc = tty->termios->c_cc[VSTART];
tmp.t_stopc = tty->termios->c_cc[VSTOP];
tmp.t_eofc = tty->termios->c_cc[VEOF];
tmp.t_brkc = tty->termios->c_cc[VEOL2]; /* what is brkc anyway? */
mutex_unlock(&tty->termios_mutex);
return copy_to_user(tchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
static int set_tchars(struct tty_struct *tty, struct tchars __user *tchars)
{
struct tchars tmp;
if (copy_from_user(&tmp, tchars, sizeof(tmp)))
return -EFAULT;
mutex_lock(&tty->termios_mutex);
tty->termios->c_cc[VINTR] = tmp.t_intrc;
tty->termios->c_cc[VQUIT] = tmp.t_quitc;
tty->termios->c_cc[VSTART] = tmp.t_startc;
tty->termios->c_cc[VSTOP] = tmp.t_stopc;
tty->termios->c_cc[VEOF] = tmp.t_eofc;
tty->termios->c_cc[VEOL2] = tmp.t_brkc; /* what is brkc anyway? */
mutex_unlock(&tty->termios_mutex);
return 0;
}
#endif
#ifdef TIOCGLTC
static int get_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
{
struct ltchars tmp;
mutex_lock(&tty->termios_mutex);
tmp.t_suspc = tty->termios->c_cc[VSUSP];
/* what is dsuspc anyway? */
tmp.t_dsuspc = tty->termios->c_cc[VSUSP];
tmp.t_rprntc = tty->termios->c_cc[VREPRINT];
/* what is flushc anyway? */
tmp.t_flushc = tty->termios->c_cc[VEOL2];
tmp.t_werasc = tty->termios->c_cc[VWERASE];
tmp.t_lnextc = tty->termios->c_cc[VLNEXT];
mutex_unlock(&tty->termios_mutex);
return copy_to_user(ltchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
{
struct ltchars tmp;
if (copy_from_user(&tmp, ltchars, sizeof(tmp)))
return -EFAULT;
mutex_lock(&tty->termios_mutex);
tty->termios->c_cc[VSUSP] = tmp.t_suspc;
/* what is dsuspc anyway? */
tty->termios->c_cc[VEOL2] = tmp.t_dsuspc;
tty->termios->c_cc[VREPRINT] = tmp.t_rprntc;
/* what is flushc anyway? */
tty->termios->c_cc[VEOL2] = tmp.t_flushc;
tty->termios->c_cc[VWERASE] = tmp.t_werasc;
tty->termios->c_cc[VLNEXT] = tmp.t_lnextc;
mutex_unlock(&tty->termios_mutex);
return 0;
}
#endif
/**
* send_prio_char - send priority character
*
* Send a high priority character to the tty even if stopped
*
* Locking: none for xchar method, write ordering for write method.
*/
static int send_prio_char(struct tty_struct *tty, char ch)
{
int was_stopped = tty->stopped;
if (tty->ops->send_xchar) {
tty->ops->send_xchar(tty, ch);
return 0;
}
if (tty_write_lock(tty, 0) < 0)
return -ERESTARTSYS;
if (was_stopped)
start_tty(tty);
tty->ops->write(tty, &ch, 1);
if (was_stopped)
stop_tty(tty);
tty_write_unlock(tty);
return 0;
}
/**
* tty_change_softcar - carrier change ioctl helper
* @tty: tty to update
* @arg: enable/disable CLOCAL
*
* Perform a change to the CLOCAL state and call into the driver
* layer to make it visible. All done with the termios mutex
*/
static int tty_change_softcar(struct tty_struct *tty, int arg)
{
int ret = 0;
int bit = arg ? CLOCAL : 0;
struct ktermios old;
mutex_lock(&tty->termios_mutex);
old = *tty->termios;
tty->termios->c_cflag &= ~CLOCAL;
tty->termios->c_cflag |= bit;
if (tty->ops->set_termios)
tty->ops->set_termios(tty, &old);
if ((tty->termios->c_cflag & CLOCAL) != bit)
ret = -EINVAL;
mutex_unlock(&tty->termios_mutex);
return ret;
}
/**
* tty_mode_ioctl - mode related ioctls
* @tty: tty for the ioctl
* @file: file pointer for the tty
* @cmd: command
* @arg: ioctl argument
*
* Perform non line discipline specific mode control ioctls. This
* is designed to be called by line disciplines to ensure they provide
* consistent mode setting.
*/
int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct tty_struct *real_tty;
void __user *p = (void __user *)arg;
int ret = 0;
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER)
real_tty = tty->link;
else
real_tty = tty;
switch (cmd) {
#ifdef TIOCGETP
case TIOCGETP:
return get_sgttyb(real_tty, (struct sgttyb __user *) arg);
case TIOCSETP:
case TIOCSETN:
return set_sgttyb(real_tty, (struct sgttyb __user *) arg);
#endif
#ifdef TIOCGETC
case TIOCGETC:
return get_tchars(real_tty, p);
case TIOCSETC:
return set_tchars(real_tty, p);
#endif
#ifdef TIOCGLTC
case TIOCGLTC:
return get_ltchars(real_tty, p);
case TIOCSLTC:
return set_ltchars(real_tty, p);
#endif
case TCSETSF:
return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT | TERMIOS_OLD);
case TCSETSW:
return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_OLD);
case TCSETS:
return set_termios(real_tty, p, TERMIOS_OLD);
#ifndef TCGETS2
case TCGETS:
mutex_lock(&real_tty->termios_mutex);
if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios))
ret = -EFAULT;
mutex_unlock(&real_tty->termios_mutex);
return ret;
#else
case TCGETS:
mutex_lock(&real_tty->termios_mutex);
if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios))
ret = -EFAULT;
mutex_unlock(&real_tty->termios_mutex);
return ret;
case TCGETS2:
mutex_lock(&real_tty->termios_mutex);
if (kernel_termios_to_user_termios((struct termios2 __user *)arg, real_tty->termios))
ret = -EFAULT;
mutex_unlock(&real_tty->termios_mutex);
return ret;
case TCSETSF2:
return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT);
case TCSETSW2:
return set_termios(real_tty, p, TERMIOS_WAIT);
case TCSETS2:
return set_termios(real_tty, p, 0);
#endif
case TCGETA:
return get_termio(real_tty, p);
case TCSETAF:
return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT | TERMIOS_TERMIO);
case TCSETAW:
return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_TERMIO);
case TCSETA:
return set_termios(real_tty, p, TERMIOS_TERMIO);
#ifndef TCGETS2
case TIOCGLCKTRMIOS:
mutex_lock(&real_tty->termios_mutex);
if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
ret = -EFAULT;
mutex_unlock(&real_tty->termios_mutex);
return ret;
case TIOCSLCKTRMIOS:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
mutex_lock(&real_tty->termios_mutex);
if (user_termios_to_kernel_termios(real_tty->termios_locked,
(struct termios __user *) arg))
ret = -EFAULT;
mutex_unlock(&real_tty->termios_mutex);
return ret;
#else
case TIOCGLCKTRMIOS:
mutex_lock(&real_tty->termios_mutex);
if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked))
ret = -EFAULT;
mutex_unlock(&real_tty->termios_mutex);
return ret;
case TIOCSLCKTRMIOS:
if (!capable(CAP_SYS_ADMIN))
ret = -EPERM;
mutex_lock(&real_tty->termios_mutex);
if (user_termios_to_kernel_termios_1(real_tty->termios_locked,
(struct termios __user *) arg))
ret = -EFAULT;
mutex_unlock(&real_tty->termios_mutex);
return ret;
#endif
#ifdef TCGETX
case TCGETX:
if (real_tty->termiox == NULL)
return -EINVAL;
mutex_lock(&real_tty->termios_mutex);
if (copy_to_user(p, real_tty->termiox, sizeof(struct termiox)))
ret = -EFAULT;
mutex_unlock(&real_tty->termios_mutex);
return ret;
case TCSETX:
return set_termiox(real_tty, p, 0);
case TCSETXW:
return set_termiox(real_tty, p, TERMIOS_WAIT);
case TCSETXF:
return set_termiox(real_tty, p, TERMIOS_FLUSH);
#endif
case TIOCGSOFTCAR:
mutex_lock(&real_tty->termios_mutex);
ret = put_user(C_CLOCAL(real_tty) ? 1 : 0,
(int __user *)arg);
mutex_unlock(&real_tty->termios_mutex);
return ret;
case TIOCSSOFTCAR:
if (get_user(arg, (unsigned int __user *) arg))
return -EFAULT;
return tty_change_softcar(real_tty, arg);
default:
return -ENOIOCTLCMD;
}
}
EXPORT_SYMBOL_GPL(tty_mode_ioctl);
int tty_perform_flush(struct tty_struct *tty, unsigned long arg)
{
struct tty_ldisc *ld;
int retval = tty_check_change(tty);
if (retval)
return retval;
ld = tty_ldisc_ref(tty);
switch (arg) {
case TCIFLUSH:
if (ld && ld->ops->flush_buffer)
ld->ops->flush_buffer(tty);
break;
case TCIOFLUSH:
if (ld && ld->ops->flush_buffer)
ld->ops->flush_buffer(tty);
/* fall through */
case TCOFLUSH:
tty_driver_flush_buffer(tty);
break;
default:
tty_ldisc_deref(ld);
return -EINVAL;
}
tty_ldisc_deref(ld);
return 0;
}
EXPORT_SYMBOL_GPL(tty_perform_flush);
int n_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
unsigned long flags;
int retval;
switch (cmd) {
case TCXONC:
retval = tty_check_change(tty);
if (retval)
return retval;
switch (arg) {
case TCOOFF:
if (!tty->flow_stopped) {
tty->flow_stopped = 1;
stop_tty(tty);
}
break;
case TCOON:
if (tty->flow_stopped) {
tty->flow_stopped = 0;
start_tty(tty);
}
break;
case TCIOFF:
if (STOP_CHAR(tty) != __DISABLED_CHAR)
return send_prio_char(tty, STOP_CHAR(tty));
break;
case TCION:
if (START_CHAR(tty) != __DISABLED_CHAR)
return send_prio_char(tty, START_CHAR(tty));
break;
default:
return -EINVAL;
}
return 0;
case TCFLSH:
return tty_perform_flush(tty, arg);
case TIOCOUTQ:
return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
case TIOCINQ:
retval = tty->read_cnt;
if (L_ICANON(tty))
retval = inq_canon(tty);
return put_user(retval, (unsigned int __user *) arg);
case TIOCPKT:
{
int pktmode;
if (tty->driver->type != TTY_DRIVER_TYPE_PTY ||
tty->driver->subtype != PTY_TYPE_MASTER)
return -ENOTTY;
if (get_user(pktmode, (int __user *) arg))
return -EFAULT;
spin_lock_irqsave(&tty->ctrl_lock, flags);
if (pktmode) {
if (!tty->packet) {
tty->packet = 1;
tty->link->ctrl_status = 0;
}
} else
tty->packet = 0;
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
return 0;
}
default:
/* Try the mode commands */
return tty_mode_ioctl(tty, file, cmd, arg);
}
}
EXPORT_SYMBOL(n_tty_ioctl);