linux/drivers/block/paride/epat.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

340 lines
7 KiB
C

/*
epat.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
Under the terms of the GNU General Public License.
This is the low level protocol driver for the EPAT parallel
to IDE adapter from Shuttle Technologies. This adapter is
used in many popular parallel port disk products such as the
SyQuest EZ drives, the Avatar Shark and the Imation SuperDisk.
*/
/* Changes:
1.01 GRG 1998.05.06 init_proto, release_proto
1.02 Joshua b. Jore CPP(renamed), epat_connect, epat_disconnect
*/
#define EPAT_VERSION "1.02"
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
#include "paride.h"
#define j44(a,b) (((a>>4)&0x0f)+(b&0xf0))
#define j53(a,b) (((a>>3)&0x1f)+((b<<4)&0xe0))
static int epatc8;
module_param(epatc8, int, 0);
MODULE_PARM_DESC(epatc8, "support for the Shuttle EP1284 chip, "
"used in any recent Imation SuperDisk (LS-120) drive.");
/* cont = 0 IDE register file
cont = 1 IDE control registers
cont = 2 internal EPAT registers
*/
static int cont_map[3] = { 0x18, 0x10, 0 };
static void epat_write_regr( PIA *pi, int cont, int regr, int val)
{ int r;
r = regr + cont_map[cont];
switch (pi->mode) {
case 0:
case 1:
case 2: w0(0x60+r); w2(1); w0(val); w2(4);
break;
case 3:
case 4:
case 5: w3(0x40+r); w4(val);
break;
}
}
static int epat_read_regr( PIA *pi, int cont, int regr )
{ int a, b, r;
r = regr + cont_map[cont];
switch (pi->mode) {
case 0: w0(r); w2(1); w2(3);
a = r1(); w2(4); b = r1();
return j44(a,b);
case 1: w0(0x40+r); w2(1); w2(4);
a = r1(); b = r2(); w0(0xff);
return j53(a,b);
case 2: w0(0x20+r); w2(1); w2(0x25);
a = r0(); w2(4);
return a;
case 3:
case 4:
case 5: w3(r); w2(0x24); a = r4(); w2(4);
return a;
}
return -1; /* never gets here */
}
static void epat_read_block( PIA *pi, char * buf, int count )
{ int k, ph, a, b;
switch (pi->mode) {
case 0: w0(7); w2(1); w2(3); w0(0xff);
ph = 0;
for(k=0;k<count;k++) {
if (k == count-1) w0(0xfd);
w2(6+ph); a = r1();
if (a & 8) b = a;
else { w2(4+ph); b = r1(); }
buf[k] = j44(a,b);
ph = 1 - ph;
}
w0(0); w2(4);
break;
case 1: w0(0x47); w2(1); w2(5); w0(0xff);
ph = 0;
for(k=0;k<count;k++) {
if (k == count-1) w0(0xfd);
w2(4+ph);
a = r1(); b = r2();
buf[k] = j53(a,b);
ph = 1 - ph;
}
w0(0); w2(4);
break;
case 2: w0(0x27); w2(1); w2(0x25); w0(0);
ph = 0;
for(k=0;k<count-1;k++) {
w2(0x24+ph);
buf[k] = r0();
ph = 1 - ph;
}
w2(0x26); w2(0x27); buf[count-1] = r0();
w2(0x25); w2(4);
break;
case 3: w3(0x80); w2(0x24);
for(k=0;k<count-1;k++) buf[k] = r4();
w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
w2(4);
break;
case 4: w3(0x80); w2(0x24);
for(k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
buf[count-2] = r4();
w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
w2(4);
break;
case 5: w3(0x80); w2(0x24);
for(k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
for(k=count-4;k<count-1;k++) buf[k] = r4();
w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
w2(4);
break;
}
}
static void epat_write_block( PIA *pi, char * buf, int count )
{ int ph, k;
switch (pi->mode) {
case 0:
case 1:
case 2: w0(0x67); w2(1); w2(5);
ph = 0;
for(k=0;k<count;k++) {
w0(buf[k]);
w2(4+ph);
ph = 1 - ph;
}
w2(7); w2(4);
break;
case 3: w3(0xc0);
for(k=0;k<count;k++) w4(buf[k]);
w2(4);
break;
case 4: w3(0xc0);
for(k=0;k<(count/2);k++) w4w(((u16 *)buf)[k]);
w2(4);
break;
case 5: w3(0xc0);
for(k=0;k<(count/4);k++) w4l(((u32 *)buf)[k]);
w2(4);
break;
}
}
/* these macros access the EPAT registers in native addressing */
#define WR(r,v) epat_write_regr(pi,2,r,v)
#define RR(r) (epat_read_regr(pi,2,r))
/* and these access the IDE task file */
#define WRi(r,v) epat_write_regr(pi,0,r,v)
#define RRi(r) (epat_read_regr(pi,0,r))
/* FIXME: the CPP stuff should be fixed to handle multiple EPATs on a chain */
#define CPP(x) w2(4);w0(0x22);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
static void epat_connect ( PIA *pi )
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
/* Initialize the chip */
CPP(0);
if (epatc8) {
CPP(0x40);CPP(0xe0);
w0(0);w2(1);w2(4);
WR(0x8,0x12);WR(0xc,0x14);WR(0x12,0x10);
WR(0xe,0xf);WR(0xf,4);
/* WR(0xe,0xa);WR(0xf,4); */
WR(0xe,0xd);WR(0xf,0);
/* CPP(0x30); */
}
/* Connect to the chip */
CPP(0xe0);
w0(0);w2(1);w2(4); /* Idle into SPP */
if (pi->mode >= 3) {
w0(0);w2(1);w2(4);w2(0xc);
/* Request EPP */
w0(0x40);w2(6);w2(7);w2(4);w2(0xc);w2(4);
}
if (!epatc8) {
WR(8,0x10); WR(0xc,0x14); WR(0xa,0x38); WR(0x12,0x10);
}
}
static void epat_disconnect (PIA *pi)
{ CPP(0x30);
w0(pi->saved_r0);
w2(pi->saved_r2);
}
static int epat_test_proto( PIA *pi, char * scratch, int verbose )
{ int k, j, f, cc;
int e[2] = {0,0};
epat_connect(pi);
cc = RR(0xd);
epat_disconnect(pi);
epat_connect(pi);
for (j=0;j<2;j++) {
WRi(6,0xa0+j*0x10);
for (k=0;k<256;k++) {
WRi(2,k^0xaa);
WRi(3,k^0x55);
if (RRi(2) != (k^0xaa)) e[j]++;
}
}
epat_disconnect(pi);
f = 0;
epat_connect(pi);
WR(0x13,1); WR(0x13,0); WR(0xa,0x11);
epat_read_block(pi,scratch,512);
for (k=0;k<256;k++) {
if ((scratch[2*k] & 0xff) != k) f++;
if ((scratch[2*k+1] & 0xff) != (0xff-k)) f++;
}
epat_disconnect(pi);
if (verbose) {
printk("%s: epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
pi->device,pi->port,pi->mode,cc,e[0],e[1],f);
}
return (e[0] && e[1]) || f;
}
static void epat_log_adapter( PIA *pi, char * scratch, int verbose )
{ int ver;
char *mode_string[6] =
{"4-bit","5/3","8-bit","EPP-8","EPP-16","EPP-32"};
epat_connect(pi);
WR(0xa,0x38); /* read the version code */
ver = RR(0xb);
epat_disconnect(pi);
printk("%s: epat %s, Shuttle EPAT chip %x at 0x%x, ",
pi->device,EPAT_VERSION,ver,pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
}
static struct pi_protocol epat = {
.owner = THIS_MODULE,
.name = "epat",
.max_mode = 6,
.epp_first = 3,
.default_delay = 1,
.max_units = 1,
.write_regr = epat_write_regr,
.read_regr = epat_read_regr,
.write_block = epat_write_block,
.read_block = epat_read_block,
.connect = epat_connect,
.disconnect = epat_disconnect,
.test_proto = epat_test_proto,
.log_adapter = epat_log_adapter,
};
static int __init epat_init(void)
{
#ifdef CONFIG_PARIDE_EPATC8
epatc8 = 1;
#endif
return pi_register(&epat)-1;
}
static void __exit epat_exit(void)
{
pi_unregister(&epat);
}
MODULE_LICENSE("GPL");
module_init(epat_init)
module_exit(epat_exit)