linux/drivers/usb/atm/speedtch.c

900 lines
26 KiB
C

/******************************************************************************
* speedtch.c - Alcatel SpeedTouch USB xDSL modem driver
*
* Copyright (C) 2001, Alcatel
* Copyright (C) 2003, Duncan Sands
* Copyright (C) 2004, David Woodhouse
*
* Based on "modem_run.c", copyright (C) 2001, Benoit Papillault
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
******************************************************************************/
#include <asm/page.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/firmware.h>
#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/timer.h>
#include <linux/types.h>
#include <linux/usb_ch9.h>
#include <linux/workqueue.h>
#include "usbatm.h"
#define DRIVER_AUTHOR "Johan Verrept, Duncan Sands <duncan.sands@free.fr>"
#define DRIVER_VERSION "1.10"
#define DRIVER_DESC "Alcatel SpeedTouch USB driver version " DRIVER_VERSION
static const char speedtch_driver_name[] = "speedtch";
#define CTRL_TIMEOUT 2000 /* milliseconds */
#define DATA_TIMEOUT 2000 /* milliseconds */
#define OFFSET_7 0 /* size 1 */
#define OFFSET_b 1 /* size 8 */
#define OFFSET_d 9 /* size 4 */
#define OFFSET_e 13 /* size 1 */
#define OFFSET_f 14 /* size 1 */
#define TOTAL 15
#define SIZE_7 1
#define SIZE_b 8
#define SIZE_d 4
#define SIZE_e 1
#define SIZE_f 1
#define MIN_POLL_DELAY 5000 /* milliseconds */
#define MAX_POLL_DELAY 60000 /* milliseconds */
#define RESUBMIT_DELAY 1000 /* milliseconds */
#define DEFAULT_BULK_ALTSETTING 1
#define DEFAULT_ISOC_ALTSETTING 3
#define DEFAULT_DL_512_FIRST 0
#define DEFAULT_ENABLE_ISOC 0
#define DEFAULT_SW_BUFFERING 0
static unsigned int altsetting = 0; /* zero means: use the default */
static int dl_512_first = DEFAULT_DL_512_FIRST;
static int enable_isoc = DEFAULT_ENABLE_ISOC;
static int sw_buffering = DEFAULT_SW_BUFFERING;
module_param(altsetting, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(altsetting,
"Alternative setting for data interface (bulk_default: "
__MODULE_STRING(DEFAULT_BULK_ALTSETTING) "; isoc_default: "
__MODULE_STRING(DEFAULT_ISOC_ALTSETTING) ")");
module_param(dl_512_first, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(dl_512_first,
"Read 512 bytes before sending firmware (default: "
__MODULE_STRING(DEFAULT_DL_512_FIRST) ")");
module_param(enable_isoc, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(enable_isoc,
"Use isochronous transfers if available (default: "
__MODULE_STRING(DEFAULT_ENABLE_ISOC) ")");
module_param(sw_buffering, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(sw_buffering,
"Enable software buffering (default: "
__MODULE_STRING(DEFAULT_SW_BUFFERING) ")");
#define INTERFACE_DATA 1
#define ENDPOINT_INT 0x81
#define ENDPOINT_BULK_DATA 0x07
#define ENDPOINT_ISOC_DATA 0x07
#define ENDPOINT_FIRMWARE 0x05
#define hex2int(c) ( (c >= '0') && (c <= '9') ? (c - '0') : ((c & 0xf) + 9) )
struct speedtch_instance_data {
struct usbatm_data *usbatm;
unsigned int altsetting;
struct work_struct status_checker;
unsigned char last_status;
int poll_delay; /* milliseconds */
struct timer_list resubmit_timer;
struct urb *int_urb;
unsigned char int_data[16];
unsigned char scratch_buffer[TOTAL];
};
/***************
** firmware **
***************/
static void speedtch_set_swbuff(struct speedtch_instance_data *instance, int state)
{
struct usbatm_data *usbatm = instance->usbatm;
struct usb_device *usb_dev = usbatm->usb_dev;
int ret;
ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
0x32, 0x40, state ? 0x01 : 0x00, 0x00, NULL, 0, CTRL_TIMEOUT);
if (ret < 0)
usb_warn(usbatm,
"%sabling SW buffering: usb_control_msg returned %d\n",
state ? "En" : "Dis", ret);
else
dbg("speedtch_set_swbuff: %sbled SW buffering", state ? "En" : "Dis");
}
static void speedtch_test_sequence(struct speedtch_instance_data *instance)
{
struct usbatm_data *usbatm = instance->usbatm;
struct usb_device *usb_dev = usbatm->usb_dev;
unsigned char *buf = instance->scratch_buffer;
int ret;
/* URB 147 */
buf[0] = 0x1c;
buf[1] = 0x50;
ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
0x01, 0x40, 0x0b, 0x00, buf, 2, CTRL_TIMEOUT);
if (ret < 0)
usb_warn(usbatm, "%s failed on URB147: %d\n", __func__, ret);
/* URB 148 */
buf[0] = 0x32;
buf[1] = 0x00;
ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
0x01, 0x40, 0x02, 0x00, buf, 2, CTRL_TIMEOUT);
if (ret < 0)
usb_warn(usbatm, "%s failed on URB148: %d\n", __func__, ret);
/* URB 149 */
buf[0] = 0x01;
buf[1] = 0x00;
buf[2] = 0x01;
ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
0x01, 0x40, 0x03, 0x00, buf, 3, CTRL_TIMEOUT);
if (ret < 0)
usb_warn(usbatm, "%s failed on URB149: %d\n", __func__, ret);
/* URB 150 */
buf[0] = 0x01;
buf[1] = 0x00;
buf[2] = 0x01;
ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
0x01, 0x40, 0x04, 0x00, buf, 3, CTRL_TIMEOUT);
if (ret < 0)
usb_warn(usbatm, "%s failed on URB150: %d\n", __func__, ret);
}
static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
const struct firmware *fw1,
const struct firmware *fw2)
{
unsigned char *buffer;
struct usbatm_data *usbatm = instance->usbatm;
struct usb_interface *intf;
struct usb_device *usb_dev = usbatm->usb_dev;
int actual_length;
int ret = 0;
int offset;
usb_dbg(usbatm, "%s entered\n", __func__);
if (!(buffer = (unsigned char *)__get_free_page(GFP_KERNEL))) {
ret = -ENOMEM;
usb_dbg(usbatm, "%s: no memory for buffer!\n", __func__);
goto out;
}
if (!(intf = usb_ifnum_to_if(usb_dev, 2))) {
ret = -ENODEV;
usb_dbg(usbatm, "%s: interface not found!\n", __func__);
goto out_free;
}
/* URB 7 */
if (dl_512_first) { /* some modems need a read before writing the firmware */
ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
buffer, 0x200, &actual_length, 2000);
if (ret < 0 && ret != -ETIMEDOUT)
usb_warn(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret);
else
usb_dbg(usbatm, "%s: BLOCK0 downloaded (%d bytes)\n", __func__, ret);
}
/* URB 8 : both leds are static green */
for (offset = 0; offset < fw1->size; offset += PAGE_SIZE) {
int thislen = min_t(int, PAGE_SIZE, fw1->size - offset);
memcpy(buffer, fw1->data + offset, thislen);
ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
buffer, thislen, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
usb_err(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret);
goto out_free;
}
usb_dbg(usbatm, "%s: BLOCK1 uploaded (%zu bytes)\n", __func__, fw1->size);
}
/* USB led blinking green, ADSL led off */
/* URB 11 */
ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
buffer, 0x200, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
usb_err(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret);
goto out_free;
}
usb_dbg(usbatm, "%s: BLOCK2 downloaded (%d bytes)\n", __func__, actual_length);
/* URBs 12 to 139 - USB led blinking green, ADSL led off */
for (offset = 0; offset < fw2->size; offset += PAGE_SIZE) {
int thislen = min_t(int, PAGE_SIZE, fw2->size - offset);
memcpy(buffer, fw2->data + offset, thislen);
ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
buffer, thislen, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
usb_err(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret);
goto out_free;
}
}
usb_dbg(usbatm, "%s: BLOCK3 uploaded (%zu bytes)\n", __func__, fw2->size);
/* USB led static green, ADSL led static red */
/* URB 142 */
ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
buffer, 0x200, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
usb_err(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret);
goto out_free;
}
/* success */
usb_dbg(usbatm, "%s: BLOCK4 downloaded (%d bytes)\n", __func__, actual_length);
/* Delay to allow firmware to start up. We can do this here
because we're in our own kernel thread anyway. */
msleep_interruptible(1000);
if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) {
usb_err(usbatm, "%s: setting interface to %d failed (%d)!\n", __func__, instance->altsetting, ret);
goto out_free;
}
/* Enable software buffering, if requested */
if (sw_buffering)
speedtch_set_swbuff(instance, 1);
/* Magic spell; don't ask us what this does */
speedtch_test_sequence(instance);
ret = 0;
out_free:
free_page((unsigned long)buffer);
out:
return ret;
}
static int speedtch_find_firmware(struct usbatm_data *usbatm, struct usb_interface *intf,
int phase, const struct firmware **fw_p)
{
struct device *dev = &intf->dev;
const u16 bcdDevice = le16_to_cpu(interface_to_usbdev(intf)->descriptor.bcdDevice);
const u8 major_revision = bcdDevice >> 8;
const u8 minor_revision = bcdDevice & 0xff;
char buf[24];
sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision);
usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
if (request_firmware(fw_p, buf, dev)) {
sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision);
usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
if (request_firmware(fw_p, buf, dev)) {
sprintf(buf, "speedtch-%d.bin", phase);
usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
if (request_firmware(fw_p, buf, dev)) {
usb_err(usbatm, "%s: no stage %d firmware found!\n", __func__, phase);
return -ENOENT;
}
}
}
usb_info(usbatm, "found stage %d firmware %s\n", phase, buf);
return 0;
}
static int speedtch_heavy_init(struct usbatm_data *usbatm, struct usb_interface *intf)
{
const struct firmware *fw1, *fw2;
struct speedtch_instance_data *instance = usbatm->driver_data;
int ret;
if ((ret = speedtch_find_firmware(usbatm, intf, 1, &fw1)) < 0)
return ret;
if ((ret = speedtch_find_firmware(usbatm, intf, 2, &fw2)) < 0) {
release_firmware(fw1);
return ret;
}
if ((ret = speedtch_upload_firmware(instance, fw1, fw2)) < 0)
usb_err(usbatm, "%s: firmware upload failed (%d)!\n", __func__, ret);
release_firmware(fw2);
release_firmware(fw1);
return ret;
}
/**********
** ATM **
**********/
static int speedtch_read_status(struct speedtch_instance_data *instance)
{
struct usbatm_data *usbatm = instance->usbatm;
struct usb_device *usb_dev = usbatm->usb_dev;
unsigned char *buf = instance->scratch_buffer;
int ret;
memset(buf, 0, TOTAL);
ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
0x12, 0xc0, 0x07, 0x00, buf + OFFSET_7, SIZE_7,
CTRL_TIMEOUT);
if (ret < 0) {
atm_dbg(usbatm, "%s: MSG 7 failed\n", __func__);
return ret;
}
ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
0x12, 0xc0, 0x0b, 0x00, buf + OFFSET_b, SIZE_b,
CTRL_TIMEOUT);
if (ret < 0) {
atm_dbg(usbatm, "%s: MSG B failed\n", __func__);
return ret;
}
ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
0x12, 0xc0, 0x0d, 0x00, buf + OFFSET_d, SIZE_d,
CTRL_TIMEOUT);
if (ret < 0) {
atm_dbg(usbatm, "%s: MSG D failed\n", __func__);
return ret;
}
ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
0x01, 0xc0, 0x0e, 0x00, buf + OFFSET_e, SIZE_e,
CTRL_TIMEOUT);
if (ret < 0) {
atm_dbg(usbatm, "%s: MSG E failed\n", __func__);
return ret;
}
ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
0x01, 0xc0, 0x0f, 0x00, buf + OFFSET_f, SIZE_f,
CTRL_TIMEOUT);
if (ret < 0) {
atm_dbg(usbatm, "%s: MSG F failed\n", __func__);
return ret;
}
return 0;
}
static int speedtch_start_synchro(struct speedtch_instance_data *instance)
{
struct usbatm_data *usbatm = instance->usbatm;
struct usb_device *usb_dev = usbatm->usb_dev;
unsigned char *buf = instance->scratch_buffer;
int ret;
atm_dbg(usbatm, "%s entered\n", __func__);
memset(buf, 0, 2);
ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
0x12, 0xc0, 0x04, 0x00,
buf, 2, CTRL_TIMEOUT);
if (ret < 0)
atm_warn(usbatm, "failed to start ADSL synchronisation: %d\n", ret);
else
atm_dbg(usbatm, "%s: modem prodded. %d bytes returned: %02x %02x\n",
__func__, ret, buf[0], buf[1]);
return ret;
}
static void speedtch_check_status(struct speedtch_instance_data *instance)
{
struct usbatm_data *usbatm = instance->usbatm;
struct atm_dev *atm_dev = usbatm->atm_dev;
unsigned char *buf = instance->scratch_buffer;
int down_speed, up_speed, ret;
unsigned char status;
#ifdef VERBOSE_DEBUG
atm_dbg(usbatm, "%s entered\n", __func__);
#endif
ret = speedtch_read_status(instance);
if (ret < 0) {
atm_warn(usbatm, "error %d fetching device status\n", ret);
instance->poll_delay = min(2 * instance->poll_delay, MAX_POLL_DELAY);
return;
}
instance->poll_delay = max(instance->poll_delay / 2, MIN_POLL_DELAY);
status = buf[OFFSET_7];
if ((status != instance->last_status) || !status) {
atm_dbg(usbatm, "%s: line state 0x%02x\n", __func__, status);
switch (status) {
case 0:
atm_dev->signal = ATM_PHY_SIG_LOST;
if (instance->last_status)
atm_info(usbatm, "ADSL line is down\n");
/* It may never resync again unless we ask it to... */
ret = speedtch_start_synchro(instance);
break;
case 0x08:
atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
atm_info(usbatm, "ADSL line is blocked?\n");
break;
case 0x10:
atm_dev->signal = ATM_PHY_SIG_LOST;
atm_info(usbatm, "ADSL line is synchronising\n");
break;
case 0x20:
down_speed = buf[OFFSET_b] | (buf[OFFSET_b + 1] << 8)
| (buf[OFFSET_b + 2] << 16) | (buf[OFFSET_b + 3] << 24);
up_speed = buf[OFFSET_b + 4] | (buf[OFFSET_b + 5] << 8)
| (buf[OFFSET_b + 6] << 16) | (buf[OFFSET_b + 7] << 24);
if (!(down_speed & 0x0000ffff) && !(up_speed & 0x0000ffff)) {
down_speed >>= 16;
up_speed >>= 16;
}
atm_dev->link_rate = down_speed * 1000 / 424;
atm_dev->signal = ATM_PHY_SIG_FOUND;
atm_info(usbatm,
"ADSL line is up (%d kb/s down | %d kb/s up)\n",
down_speed, up_speed);
break;
default:
atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
atm_info(usbatm, "unknown line state %02x\n", status);
break;
}
instance->last_status = status;
}
}
static void speedtch_status_poll(unsigned long data)
{
struct speedtch_instance_data *instance = (void *)data;
schedule_work(&instance->status_checker);
/* The following check is racy, but the race is harmless */
if (instance->poll_delay < MAX_POLL_DELAY)
mod_timer(&instance->status_checker.timer, jiffies + msecs_to_jiffies(instance->poll_delay));
else
atm_warn(instance->usbatm, "Too many failures - disabling line status polling\n");
}
static void speedtch_resubmit_int(unsigned long data)
{
struct speedtch_instance_data *instance = (void *)data;
struct urb *int_urb = instance->int_urb;
int ret;
atm_dbg(instance->usbatm, "%s entered\n", __func__);
if (int_urb) {
ret = usb_submit_urb(int_urb, GFP_ATOMIC);
if (!ret)
schedule_work(&instance->status_checker);
else {
atm_dbg(instance->usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY));
}
}
}
static void speedtch_handle_int(struct urb *int_urb, struct pt_regs *regs)
{
struct speedtch_instance_data *instance = int_urb->context;
struct usbatm_data *usbatm = instance->usbatm;
unsigned int count = int_urb->actual_length;
int ret = int_urb->status;
/* The magic interrupt for "up state" */
static const unsigned char up_int[6] = { 0xa1, 0x00, 0x01, 0x00, 0x00, 0x00 };
/* The magic interrupt for "down state" */
static const unsigned char down_int[6] = { 0xa1, 0x00, 0x00, 0x00, 0x00, 0x00 };
atm_dbg(usbatm, "%s entered\n", __func__);
if (ret < 0) {
atm_dbg(usbatm, "%s: nonzero urb status %d!\n", __func__, ret);
goto fail;
}
if ((count == 6) && !memcmp(up_int, instance->int_data, 6)) {
del_timer(&instance->status_checker.timer);
atm_info(usbatm, "DSL line goes up\n");
} else if ((count == 6) && !memcmp(down_int, instance->int_data, 6)) {
atm_info(usbatm, "DSL line goes down\n");
} else {
int i;
atm_dbg(usbatm, "%s: unknown interrupt packet of length %d:", __func__, count);
for (i = 0; i < count; i++)
printk(" %02x", instance->int_data[i]);
printk("\n");
goto fail;
}
if ((int_urb = instance->int_urb)) {
ret = usb_submit_urb(int_urb, GFP_ATOMIC);
schedule_work(&instance->status_checker);
if (ret < 0) {
atm_dbg(usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
goto fail;
}
}
return;
fail:
if ((int_urb = instance->int_urb))
mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY));
}
static int speedtch_atm_start(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
{
struct usb_device *usb_dev = usbatm->usb_dev;
struct speedtch_instance_data *instance = usbatm->driver_data;
int i, ret;
unsigned char mac_str[13];
atm_dbg(usbatm, "%s entered\n", __func__);
/* Set MAC address, it is stored in the serial number */
memset(atm_dev->esi, 0, sizeof(atm_dev->esi));
if (usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) {
for (i = 0; i < 6; i++)
atm_dev->esi[i] = (hex2int(mac_str[i * 2]) * 16) + (hex2int(mac_str[i * 2 + 1]));
}
/* Start modem synchronisation */
ret = speedtch_start_synchro(instance);
/* Set up interrupt endpoint */
if (instance->int_urb) {
ret = usb_submit_urb(instance->int_urb, GFP_KERNEL);
if (ret < 0) {
/* Doesn't matter; we'll poll anyway */
atm_dbg(usbatm, "%s: submission of interrupt URB failed (%d)!\n", __func__, ret);
usb_free_urb(instance->int_urb);
instance->int_urb = NULL;
}
}
/* Start status polling */
mod_timer(&instance->status_checker.timer, jiffies + msecs_to_jiffies(1000));
return 0;
}
static void speedtch_atm_stop(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
{
struct speedtch_instance_data *instance = usbatm->driver_data;
struct urb *int_urb = instance->int_urb;
atm_dbg(usbatm, "%s entered\n", __func__);
del_timer_sync(&instance->status_checker.timer);
/*
* Since resubmit_timer and int_urb can schedule themselves and
* each other, shutting them down correctly takes some care
*/
instance->int_urb = NULL; /* signal shutdown */
mb();
usb_kill_urb(int_urb);
del_timer_sync(&instance->resubmit_timer);
/*
* At this point, speedtch_handle_int and speedtch_resubmit_int
* can run or be running, but instance->int_urb == NULL means that
* they will not reschedule
*/
usb_kill_urb(int_urb);
del_timer_sync(&instance->resubmit_timer);
usb_free_urb(int_urb);
flush_scheduled_work();
}
/**********
** USB **
**********/
static struct usb_device_id speedtch_usb_ids[] = {
{USB_DEVICE(0x06b9, 0x4061)},
{}
};
MODULE_DEVICE_TABLE(usb, speedtch_usb_ids);
static int speedtch_usb_probe(struct usb_interface *, const struct usb_device_id *);
static struct usb_driver speedtch_usb_driver = {
.name = speedtch_driver_name,
.probe = speedtch_usb_probe,
.disconnect = usbatm_usb_disconnect,
.id_table = speedtch_usb_ids
};
static void speedtch_release_interfaces(struct usb_device *usb_dev, int num_interfaces) {
struct usb_interface *cur_intf;
int i;
for(i = 0; i < num_interfaces; i++)
if ((cur_intf = usb_ifnum_to_if(usb_dev, i))) {
usb_set_intfdata(cur_intf, NULL);
usb_driver_release_interface(&speedtch_usb_driver, cur_intf);
}
}
static int speedtch_bind(struct usbatm_data *usbatm,
struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *usb_dev = interface_to_usbdev(intf);
struct usb_interface *cur_intf, *data_intf;
struct speedtch_instance_data *instance;
int ifnum = intf->altsetting->desc.bInterfaceNumber;
int num_interfaces = usb_dev->actconfig->desc.bNumInterfaces;
int i, ret;
int use_isoc;
usb_dbg(usbatm, "%s entered\n", __func__);
/* sanity checks */
if (usb_dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) {
usb_err(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass);
return -ENODEV;
}
if (!(data_intf = usb_ifnum_to_if(usb_dev, INTERFACE_DATA))) {
usb_err(usbatm, "%s: data interface not found!\n", __func__);
return -ENODEV;
}
/* claim all interfaces */
for (i=0; i < num_interfaces; i++) {
cur_intf = usb_ifnum_to_if(usb_dev, i);
if ((i != ifnum) && cur_intf) {
ret = usb_driver_claim_interface(&speedtch_usb_driver, cur_intf, usbatm);
if (ret < 0) {
usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, i, ret);
speedtch_release_interfaces(usb_dev, i);
return ret;
}
}
}
instance = kzalloc(sizeof(*instance), GFP_KERNEL);
if (!instance) {
usb_err(usbatm, "%s: no memory for instance data!\n", __func__);
ret = -ENOMEM;
goto fail_release;
}
instance->usbatm = usbatm;
/* altsetting and enable_isoc may change at any moment, so take a snapshot */
instance->altsetting = altsetting;
use_isoc = enable_isoc;
if (instance->altsetting)
if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) {
usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, instance->altsetting, ret);
instance->altsetting = 0; /* fall back to default */
}
if (!instance->altsetting && use_isoc)
if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ISOC_ALTSETTING)) < 0) {
usb_dbg(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ISOC_ALTSETTING, ret);
use_isoc = 0; /* fall back to bulk */
}
if (use_isoc) {
const struct usb_host_interface *desc = data_intf->cur_altsetting;
const __u8 target_address = USB_DIR_IN | usbatm->driver->isoc_in;
int i;
use_isoc = 0; /* fall back to bulk if endpoint not found */
for (i=0; i<desc->desc.bNumEndpoints; i++) {
const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc;
if ((endpoint_desc->bEndpointAddress == target_address)) {
use_isoc = (endpoint_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
USB_ENDPOINT_XFER_ISOC;
break;
}
}
if (!use_isoc)
usb_info(usbatm, "isochronous transfer not supported - using bulk\n");
}
if (!use_isoc && !instance->altsetting)
if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_BULK_ALTSETTING)) < 0) {
usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_BULK_ALTSETTING, ret);
goto fail_free;
}
if (!instance->altsetting)
instance->altsetting = use_isoc ? DEFAULT_ISOC_ALTSETTING : DEFAULT_BULK_ALTSETTING;
usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0);
INIT_WORK(&instance->status_checker, (void *)speedtch_check_status, instance);
instance->status_checker.timer.function = speedtch_status_poll;
instance->status_checker.timer.data = (unsigned long)instance;
instance->last_status = 0xff;
instance->poll_delay = MIN_POLL_DELAY;
init_timer(&instance->resubmit_timer);
instance->resubmit_timer.function = speedtch_resubmit_int;
instance->resubmit_timer.data = (unsigned long)instance;
instance->int_urb = usb_alloc_urb(0, GFP_KERNEL);
if (instance->int_urb)
usb_fill_int_urb(instance->int_urb, usb_dev,
usb_rcvintpipe(usb_dev, ENDPOINT_INT),
instance->int_data, sizeof(instance->int_data),
speedtch_handle_int, instance, 50);
else
usb_dbg(usbatm, "%s: no memory for interrupt urb!\n", __func__);
/* check whether the modem already seems to be alive */
ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
0x12, 0xc0, 0x07, 0x00,
instance->scratch_buffer + OFFSET_7, SIZE_7, 500);
usbatm->flags |= (ret == SIZE_7 ? UDSL_SKIP_HEAVY_INIT : 0);
usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, usbatm->flags & UDSL_SKIP_HEAVY_INIT ? "already" : "not");
if (!(usbatm->flags & UDSL_SKIP_HEAVY_INIT))
if ((ret = usb_reset_device(usb_dev)) < 0) {
usb_err(usbatm, "%s: device reset failed (%d)!\n", __func__, ret);
goto fail_free;
}
usbatm->driver_data = instance;
return 0;
fail_free:
usb_free_urb(instance->int_urb);
kfree(instance);
fail_release:
speedtch_release_interfaces(usb_dev, num_interfaces);
return ret;
}
static void speedtch_unbind(struct usbatm_data *usbatm, struct usb_interface *intf)
{
struct usb_device *usb_dev = interface_to_usbdev(intf);
struct speedtch_instance_data *instance = usbatm->driver_data;
usb_dbg(usbatm, "%s entered\n", __func__);
speedtch_release_interfaces(usb_dev, usb_dev->actconfig->desc.bNumInterfaces);
usb_free_urb(instance->int_urb);
kfree(instance);
}
/***********
** init **
***********/
static struct usbatm_driver speedtch_usbatm_driver = {
.driver_name = speedtch_driver_name,
.bind = speedtch_bind,
.heavy_init = speedtch_heavy_init,
.unbind = speedtch_unbind,
.atm_start = speedtch_atm_start,
.atm_stop = speedtch_atm_stop,
.bulk_in = ENDPOINT_BULK_DATA,
.bulk_out = ENDPOINT_BULK_DATA,
.isoc_in = ENDPOINT_ISOC_DATA
};
static int speedtch_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
return usbatm_usb_probe(intf, id, &speedtch_usbatm_driver);
}
static int __init speedtch_usb_init(void)
{
dbg("%s: driver version %s", __func__, DRIVER_VERSION);
return usb_register(&speedtch_usb_driver);
}
static void __exit speedtch_usb_cleanup(void)
{
dbg("%s", __func__);
usb_deregister(&speedtch_usb_driver);
}
module_init(speedtch_usb_init);
module_exit(speedtch_usb_cleanup);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_VERSION(DRIVER_VERSION);