linux/drivers/char/rio/port.h
Alan Cox 27c6e526f3 [PATCH] rio driver rework continued #1
More header cleanups, strip out typedefs and remove cruft.  There are a lot of
magic macros that can go and also a great deal of abuse of volatile that is
not needed any more as this patch set cleans up the misuse of pointer access
to ISA and PCI space.

It now builds cleanly on 64bit, although there is more work left to do

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:29 -08:00

179 lines
7.1 KiB
C

/*
** -----------------------------------------------------------------------------
**
** Perle Specialix driver for Linux
** Ported from existing RIO Driver for SCO sources.
*
* (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
**
** Module : port.h
** SID : 1.3
** Last Modified : 11/6/98 11:34:12
** Retrieved : 11/6/98 11:34:21
**
** ident @(#)port.h 1.3
**
** -----------------------------------------------------------------------------
*/
#ifndef __rio_port_h__
#define __rio_port_h__
/*
** Port data structure
*/
struct Port {
struct gs_port gs;
int PortNum; /* RIO port no., 0-511 */
struct Host *HostP;
caddr_t Caddr;
unsigned short HostPort; /* Port number on host card */
unsigned char RupNum; /* Number of RUP for port */
unsigned char ID2; /* Second ID of RTA for port */
unsigned long State; /* FLAGS for open & xopen */
#define RIO_LOPEN 0x00001 /* Local open */
#define RIO_MOPEN 0x00002 /* Modem open */
#define RIO_WOPEN 0x00004 /* Waiting for open */
#define RIO_CLOSING 0x00008 /* The port is being close */
#define RIO_XPBUSY 0x00010 /* Transparent printer busy */
#define RIO_BREAKING 0x00020 /* Break in progress */
#define RIO_DIRECT 0x00040 /* Doing Direct output */
#define RIO_EXCLUSIVE 0x00080 /* Stream open for exclusive use */
#define RIO_NDELAY 0x00100 /* Stream is open FNDELAY */
#define RIO_CARR_ON 0x00200 /* Stream has carrier present */
#define RIO_XPWANTR 0x00400 /* Stream wanted by Xprint */
#define RIO_RBLK 0x00800 /* Stream is read-blocked */
#define RIO_BUSY 0x01000 /* Stream is BUSY for write */
#define RIO_TIMEOUT 0x02000 /* Stream timeout in progress */
#define RIO_TXSTOP 0x04000 /* Stream output is stopped */
#define RIO_WAITFLUSH 0x08000 /* Stream waiting for flush */
#define RIO_DYNOROD 0x10000 /* Drain failed */
#define RIO_DELETED 0x20000 /* RTA has been deleted */
#define RIO_ISSCANCODE 0x40000 /* This line is in scancode mode */
#define RIO_USING_EUC 0x100000 /* Using extended Unix chars */
#define RIO_CAN_COOK 0x200000 /* This line can do cooking */
#define RIO_TRIAD_MODE 0x400000 /* Enable TRIAD special ops. */
#define RIO_TRIAD_BLOCK 0x800000 /* Next read will block */
#define RIO_TRIAD_FUNC 0x1000000 /* Seen a function key coming in */
#define RIO_THROTTLE_RX 0x2000000 /* RX needs to be throttled. */
unsigned long Config; /* FLAGS for NOREAD.... */
#define RIO_NOREAD 0x0001 /* Are not allowed to read port */
#define RIO_NOWRITE 0x0002 /* Are not allowed to write port */
#define RIO_NOXPRINT 0x0004 /* Are not allowed to xprint port */
#define RIO_NOMASK 0x0007 /* All not allowed things */
#define RIO_IXANY 0x0008 /* Port is allowed ixany */
#define RIO_MODEM 0x0010 /* Stream is a modem device */
#define RIO_IXON 0x0020 /* Port is allowed ixon */
#define RIO_WAITDRAIN 0x0040 /* Wait for port to completely drain */
#define RIO_MAP_50_TO_50 0x0080 /* Map 50 baud to 50 baud */
#define RIO_MAP_110_TO_110 0x0100 /* Map 110 baud to 110 baud */
/*
** 15.10.1998 ARG - ESIL 0761 prt fix
** As LynxOS does not appear to support Hardware Flow Control .....
** Define our own flow control flags in 'Config'.
*/
#define RIO_CTSFLOW 0x0200 /* RIO's own CTSFLOW flag */
#define RIO_RTSFLOW 0x0400 /* RIO's own RTSFLOW flag */
struct PHB *PhbP; /* pointer to PHB for port */
u16 *TxAdd; /* Add packets here */
u16 *TxStart; /* Start of add array */
u16 *TxEnd; /* End of add array */
u16 *RxRemove; /* Remove packets here */
u16 *RxStart; /* Start of remove array */
u16 *RxEnd; /* End of remove array */
unsigned int RtaUniqueNum; /* Unique number of RTA */
unsigned short PortState; /* status of port */
unsigned short ModemState; /* status of modem lines */
unsigned long ModemLines; /* Modem bits sent to RTA */
unsigned char CookMode; /* who expands CR/LF? */
unsigned char ParamSem; /* Prevent write during param */
unsigned char Mapped; /* if port mapped onto host */
unsigned char SecondBlock; /* if port belongs to 2nd block
of 16 port RTA */
unsigned char InUse; /* how many pre-emptive cmds */
unsigned char Lock; /* if params locked */
unsigned char Store; /* if params stored across closes */
unsigned char FirstOpen; /* TRUE if first time port opened */
unsigned char FlushCmdBodge; /* if doing a (non)flush */
unsigned char MagicFlags; /* require intr processing */
#define MAGIC_FLUSH 0x01 /* mirror of WflushFlag */
#define MAGIC_REBOOT 0x02 /* RTA re-booted, re-open ports */
#define MORE_OUTPUT_EYGOR 0x04 /* riotproc failed to empty clists */
unsigned char WflushFlag; /* 1 How many WFLUSHs active */
/*
** Transparent print stuff
*/
struct Xprint {
#ifndef MAX_XP_CTRL_LEN
#define MAX_XP_CTRL_LEN 16 /* ALSO IN DAEMON.H */
#endif
unsigned int XpCps;
char XpOn[MAX_XP_CTRL_LEN];
char XpOff[MAX_XP_CTRL_LEN];
unsigned short XpLen; /* strlen(XpOn)+strlen(XpOff) */
unsigned char XpActive;
unsigned char XpLastTickOk; /* TRUE if we can process */
#define XP_OPEN 00001
#define XP_RUNABLE 00002
struct ttystatics *XttyP;
} Xprint;
unsigned char RxDataStart;
unsigned char Cor2Copy; /* copy of COR2 */
char *Name; /* points to the Rta's name */
char *TxRingBuffer;
unsigned short TxBufferIn; /* New data arrives here */
unsigned short TxBufferOut; /* Intr removes data here */
unsigned short OldTxBufferOut; /* Indicates if draining */
int TimeoutId; /* Timeout ID */
unsigned int Debug;
unsigned char WaitUntilBooted; /* True if open should block */
unsigned int statsGather; /* True if gathering stats */
unsigned long txchars; /* Chars transmitted */
unsigned long rxchars; /* Chars received */
unsigned long opens; /* port open count */
unsigned long closes; /* port close count */
unsigned long ioctls; /* ioctl count */
unsigned char LastRxTgl; /* Last state of rx toggle bit */
spinlock_t portSem; /* Lock using this sem */
int MonitorTstate; /* Monitoring ? */
int timeout_id; /* For calling 100 ms delays */
int timeout_sem; /* For calling 100 ms delays */
int firstOpen; /* First time open ? */
char *p; /* save the global struc here .. */
};
struct ModuleInfo {
char *Name;
unsigned int Flags[4]; /* one per port on a module */
};
/*
** This struct is required because trying to grab an entire Port structure
** runs into problems with differing struct sizes between driver and config.
*/
struct PortParams {
unsigned int Port;
unsigned long Config;
unsigned long State;
struct ttystatics *TtyP;
};
#endif