linux/arch/sh/boards/snapgear/io.c

227 lines
5.1 KiB
C

/*
* linux/arch/sh/kernel/io_7751se.c
*
* Copyright (C) 2002 David McCullough <davidm@snapgear.com>
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
* Based largely on io_se.c.
*
* I/O routine for Hitachi 7751 SolutionEngine.
*
* Initial version only to support LAN access; some
* placeholder code from io_se.c left in with the
* expectation of later SuperIO and PCMCIA access.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/addrspace.h>
#include <asm/pci.h>
#include "../../drivers/pci/pci-sh7751.h"
#ifdef CONFIG_SH_SECUREEDGE5410
unsigned short secureedge5410_ioport;
#endif
/*
* The SnapGear uses the built-in PCI controller (PCIC)
* of the 7751 processor
*/
#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
#define PCI_IO_AREA SH7751_PCI_IO_BASE
#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
#define maybebadio(name,port) \
printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
#name, (port), (__u32) __builtin_return_address(0))
static inline void delay(void)
{
ctrl_inw(0xa0000000);
}
static inline volatile __u16 *port2adr(unsigned int port)
{
#if 0
if (port >= 0x2000)
return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
#endif
maybebadio(name,(unsigned long)port);
return (volatile __u16*)port;
}
/* In case someone configures the kernel w/o PCI support: in that */
/* scenario, don't ever bother to check for PCI-window addresses */
/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
#if defined(CONFIG_PCI)
#define CHECK_SH7751_PCIIO(port) \
((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
#else
#define CHECK_SH7751_PCIIO(port) (0)
#endif
/*
* General outline: remap really low stuff [eventually] to SuperIO,
* stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
* is mapped through the PCI IO window. Stuff with high bits (PXSEG)
* should be way beyond the window, and is used w/o translation for
* compatibility.
*/
unsigned char snapgear_inb(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
else if (CHECK_SH7751_PCIIO(port))
return *(volatile unsigned char *)PCI_IOMAP(port);
else
return (*port2adr(port))&0xff;
}
unsigned char snapgear_inb_p(unsigned long port)
{
unsigned char v;
if (PXSEG(port))
v = *(volatile unsigned char *)port;
else if (CHECK_SH7751_PCIIO(port))
v = *(volatile unsigned char *)PCI_IOMAP(port);
else
v = (*port2adr(port))&0xff;
delay();
return v;
}
unsigned short snapgear_inw(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
else if (CHECK_SH7751_PCIIO(port))
return *(volatile unsigned short *)PCI_IOMAP(port);
else if (port >= 0x2000)
return *port2adr(port);
else
maybebadio(inw, port);
return 0;
}
unsigned int snapgear_inl(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
else if (CHECK_SH7751_PCIIO(port))
return *(volatile unsigned int *)PCI_IOMAP(port);
else if (port >= 0x2000)
return *port2adr(port);
else
maybebadio(inl, port);
return 0;
}
void snapgear_outb(unsigned char value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned char*)PCI_IOMAP(port)) = value;
else
*(port2adr(port)) = value;
}
void snapgear_outb_p(unsigned char value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned char*)PCI_IOMAP(port)) = value;
else
*(port2adr(port)) = value;
delay();
}
void snapgear_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned short *)PCI_IOMAP(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else
maybebadio(outw, port);
}
void snapgear_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned long*)PCI_IOMAP(port)) = value;
else
maybebadio(outl, port);
}
void snapgear_insl(unsigned long port, void *addr, unsigned long count)
{
maybebadio(insl, port);
}
void snapgear_outsl(unsigned long port, const void *addr, unsigned long count)
{
maybebadio(outsw, port);
}
/* Map ISA bus address to the real address. Only for PCMCIA. */
/* ISA page descriptor. */
static __u32 sh_isa_memmap[256];
#if 0
static int sh_isa_mmap(__u32 start, __u32 length, __u32 offset)
{
int idx;
if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000))
return -1;
idx = start >> 12;
sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff);
#if 0
printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n",
start, length, offset, idx, sh_isa_memmap[idx]);
#endif
return 0;
}
#endif
unsigned long snapgear_isa_port2addr(unsigned long offset)
{
int idx;
idx = (offset >> 12) & 0xff;
offset &= 0xfff;
return sh_isa_memmap[idx] + offset;
}