4b988280be
In particular, set pause advertising bits properly. A PHY reset is not necessary to recover from the register self-test, so use a "invisible" reset there instead. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
762 lines
21 KiB
C
762 lines
21 KiB
C
/****************************************************************************
|
|
* Driver for Solarflare Solarstorm network controllers and boards
|
|
* Copyright 2005-2006 Fen Systems Ltd.
|
|
* Copyright 2006-2008 Solarflare Communications Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation, incorporated herein by reference.
|
|
*/
|
|
|
|
#include <linux/netdevice.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel_stat.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/in.h>
|
|
#include <linux/udp.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <asm/io.h>
|
|
#include "net_driver.h"
|
|
#include "ethtool.h"
|
|
#include "efx.h"
|
|
#include "falcon.h"
|
|
#include "selftest.h"
|
|
#include "boards.h"
|
|
#include "workarounds.h"
|
|
#include "spi.h"
|
|
#include "falcon_io.h"
|
|
#include "mdio_10g.h"
|
|
|
|
/*
|
|
* Loopback test packet structure
|
|
*
|
|
* The self-test should stress every RSS vector, and unfortunately
|
|
* Falcon only performs RSS on TCP/UDP packets.
|
|
*/
|
|
struct efx_loopback_payload {
|
|
struct ethhdr header;
|
|
struct iphdr ip;
|
|
struct udphdr udp;
|
|
__be16 iteration;
|
|
const char msg[64];
|
|
} __attribute__ ((packed));
|
|
|
|
/* Loopback test source MAC address */
|
|
static const unsigned char payload_source[ETH_ALEN] = {
|
|
0x00, 0x0f, 0x53, 0x1b, 0x1b, 0x1b,
|
|
};
|
|
|
|
static const char *payload_msg =
|
|
"Hello world! This is an Efx loopback test in progress!";
|
|
|
|
/**
|
|
* efx_loopback_state - persistent state during a loopback selftest
|
|
* @flush: Drop all packets in efx_loopback_rx_packet
|
|
* @packet_count: Number of packets being used in this test
|
|
* @skbs: An array of skbs transmitted
|
|
* @rx_good: RX good packet count
|
|
* @rx_bad: RX bad packet count
|
|
* @payload: Payload used in tests
|
|
*/
|
|
struct efx_loopback_state {
|
|
bool flush;
|
|
int packet_count;
|
|
struct sk_buff **skbs;
|
|
|
|
/* Checksums are being offloaded */
|
|
bool offload_csum;
|
|
|
|
atomic_t rx_good;
|
|
atomic_t rx_bad;
|
|
struct efx_loopback_payload payload;
|
|
};
|
|
|
|
/**************************************************************************
|
|
*
|
|
* MII, NVRAM and register tests
|
|
*
|
|
**************************************************************************/
|
|
|
|
static int efx_test_mii(struct efx_nic *efx, struct efx_self_tests *tests)
|
|
{
|
|
int rc = 0;
|
|
u16 physid1, physid2;
|
|
struct mii_if_info *mii = &efx->mii;
|
|
struct net_device *net_dev = efx->net_dev;
|
|
|
|
if (efx->phy_type == PHY_TYPE_NONE)
|
|
return 0;
|
|
|
|
mutex_lock(&efx->mac_lock);
|
|
tests->mii = -1;
|
|
|
|
physid1 = mii->mdio_read(net_dev, mii->phy_id, MII_PHYSID1);
|
|
physid2 = mii->mdio_read(net_dev, mii->phy_id, MII_PHYSID2);
|
|
|
|
if ((physid1 == 0x0000) || (physid1 == 0xffff) ||
|
|
(physid2 == 0x0000) || (physid2 == 0xffff)) {
|
|
EFX_ERR(efx, "no MII PHY present with ID %d\n",
|
|
mii->phy_id);
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
if (EFX_IS10G(efx)) {
|
|
rc = mdio_clause45_check_mmds(efx, efx->phy_op->mmds, 0);
|
|
if (rc)
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
mutex_unlock(&efx->mac_lock);
|
|
tests->mii = rc ? -1 : 1;
|
|
return rc;
|
|
}
|
|
|
|
static int efx_test_nvram(struct efx_nic *efx, struct efx_self_tests *tests)
|
|
{
|
|
int rc;
|
|
|
|
rc = falcon_read_nvram(efx, NULL);
|
|
tests->nvram = rc ? -1 : 1;
|
|
return rc;
|
|
}
|
|
|
|
static int efx_test_chip(struct efx_nic *efx, struct efx_self_tests *tests)
|
|
{
|
|
int rc;
|
|
|
|
/* Not supported on A-series silicon */
|
|
if (falcon_rev(efx) < FALCON_REV_B0)
|
|
return 0;
|
|
|
|
rc = falcon_test_registers(efx);
|
|
tests->registers = rc ? -1 : 1;
|
|
return rc;
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Interrupt and event queue testing
|
|
*
|
|
**************************************************************************/
|
|
|
|
/* Test generation and receipt of interrupts */
|
|
static int efx_test_interrupts(struct efx_nic *efx,
|
|
struct efx_self_tests *tests)
|
|
{
|
|
struct efx_channel *channel;
|
|
|
|
EFX_LOG(efx, "testing interrupts\n");
|
|
tests->interrupt = -1;
|
|
|
|
/* Reset interrupt flag */
|
|
efx->last_irq_cpu = -1;
|
|
smp_wmb();
|
|
|
|
/* ACK each interrupting event queue. Receiving an interrupt due to
|
|
* traffic before a test event is raised is considered a pass */
|
|
efx_for_each_channel(channel, efx) {
|
|
if (channel->work_pending)
|
|
efx_process_channel_now(channel);
|
|
if (efx->last_irq_cpu >= 0)
|
|
goto success;
|
|
}
|
|
|
|
falcon_generate_interrupt(efx);
|
|
|
|
/* Wait for arrival of test interrupt. */
|
|
EFX_LOG(efx, "waiting for test interrupt\n");
|
|
schedule_timeout_uninterruptible(HZ / 10);
|
|
if (efx->last_irq_cpu >= 0)
|
|
goto success;
|
|
|
|
EFX_ERR(efx, "timed out waiting for interrupt\n");
|
|
return -ETIMEDOUT;
|
|
|
|
success:
|
|
EFX_LOG(efx, "test interrupt (mode %d) seen on CPU%d\n",
|
|
efx->interrupt_mode, efx->last_irq_cpu);
|
|
tests->interrupt = 1;
|
|
return 0;
|
|
}
|
|
|
|
/* Test generation and receipt of interrupting events */
|
|
static int efx_test_eventq_irq(struct efx_channel *channel,
|
|
struct efx_self_tests *tests)
|
|
{
|
|
unsigned int magic, count;
|
|
|
|
/* Channel specific code, limited to 20 bits */
|
|
magic = (0x00010150 + channel->channel);
|
|
EFX_LOG(channel->efx, "channel %d testing event queue with code %x\n",
|
|
channel->channel, magic);
|
|
|
|
tests->eventq_dma[channel->channel] = -1;
|
|
tests->eventq_int[channel->channel] = -1;
|
|
tests->eventq_poll[channel->channel] = -1;
|
|
|
|
/* Reset flag and zero magic word */
|
|
channel->efx->last_irq_cpu = -1;
|
|
channel->eventq_magic = 0;
|
|
smp_wmb();
|
|
|
|
falcon_generate_test_event(channel, magic);
|
|
|
|
/* Wait for arrival of interrupt */
|
|
count = 0;
|
|
do {
|
|
schedule_timeout_uninterruptible(HZ / 100);
|
|
|
|
if (channel->work_pending)
|
|
efx_process_channel_now(channel);
|
|
|
|
if (channel->eventq_magic == magic)
|
|
goto eventq_ok;
|
|
} while (++count < 2);
|
|
|
|
EFX_ERR(channel->efx, "channel %d timed out waiting for event queue\n",
|
|
channel->channel);
|
|
|
|
/* See if interrupt arrived */
|
|
if (channel->efx->last_irq_cpu >= 0) {
|
|
EFX_ERR(channel->efx, "channel %d saw interrupt on CPU%d "
|
|
"during event queue test\n", channel->channel,
|
|
raw_smp_processor_id());
|
|
tests->eventq_int[channel->channel] = 1;
|
|
}
|
|
|
|
/* Check to see if event was received even if interrupt wasn't */
|
|
efx_process_channel_now(channel);
|
|
if (channel->eventq_magic == magic) {
|
|
EFX_ERR(channel->efx, "channel %d event was generated, but "
|
|
"failed to trigger an interrupt\n", channel->channel);
|
|
tests->eventq_dma[channel->channel] = 1;
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
eventq_ok:
|
|
EFX_LOG(channel->efx, "channel %d event queue passed\n",
|
|
channel->channel);
|
|
tests->eventq_dma[channel->channel] = 1;
|
|
tests->eventq_int[channel->channel] = 1;
|
|
tests->eventq_poll[channel->channel] = 1;
|
|
return 0;
|
|
}
|
|
|
|
static int efx_test_phy(struct efx_nic *efx, struct efx_self_tests *tests,
|
|
unsigned flags)
|
|
{
|
|
int rc;
|
|
|
|
if (!efx->phy_op->run_tests)
|
|
return 0;
|
|
|
|
EFX_BUG_ON_PARANOID(efx->phy_op->num_tests == 0 ||
|
|
efx->phy_op->num_tests > EFX_MAX_PHY_TESTS);
|
|
|
|
mutex_lock(&efx->mac_lock);
|
|
rc = efx->phy_op->run_tests(efx, tests->phy, flags);
|
|
mutex_unlock(&efx->mac_lock);
|
|
return rc;
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Loopback testing
|
|
* NB Only one loopback test can be executing concurrently.
|
|
*
|
|
**************************************************************************/
|
|
|
|
/* Loopback test RX callback
|
|
* This is called for each received packet during loopback testing.
|
|
*/
|
|
void efx_loopback_rx_packet(struct efx_nic *efx,
|
|
const char *buf_ptr, int pkt_len)
|
|
{
|
|
struct efx_loopback_state *state = efx->loopback_selftest;
|
|
struct efx_loopback_payload *received;
|
|
struct efx_loopback_payload *payload;
|
|
|
|
BUG_ON(!buf_ptr);
|
|
|
|
/* If we are just flushing, then drop the packet */
|
|
if ((state == NULL) || state->flush)
|
|
return;
|
|
|
|
payload = &state->payload;
|
|
|
|
received = (struct efx_loopback_payload *) buf_ptr;
|
|
received->ip.saddr = payload->ip.saddr;
|
|
if (state->offload_csum)
|
|
received->ip.check = payload->ip.check;
|
|
|
|
/* Check that header exists */
|
|
if (pkt_len < sizeof(received->header)) {
|
|
EFX_ERR(efx, "saw runt RX packet (length %d) in %s loopback "
|
|
"test\n", pkt_len, LOOPBACK_MODE(efx));
|
|
goto err;
|
|
}
|
|
|
|
/* Check that the ethernet header exists */
|
|
if (memcmp(&received->header, &payload->header, ETH_HLEN) != 0) {
|
|
EFX_ERR(efx, "saw non-loopback RX packet in %s loopback test\n",
|
|
LOOPBACK_MODE(efx));
|
|
goto err;
|
|
}
|
|
|
|
/* Check packet length */
|
|
if (pkt_len != sizeof(*payload)) {
|
|
EFX_ERR(efx, "saw incorrect RX packet length %d (wanted %d) in "
|
|
"%s loopback test\n", pkt_len, (int)sizeof(*payload),
|
|
LOOPBACK_MODE(efx));
|
|
goto err;
|
|
}
|
|
|
|
/* Check that IP header matches */
|
|
if (memcmp(&received->ip, &payload->ip, sizeof(payload->ip)) != 0) {
|
|
EFX_ERR(efx, "saw corrupted IP header in %s loopback test\n",
|
|
LOOPBACK_MODE(efx));
|
|
goto err;
|
|
}
|
|
|
|
/* Check that msg and padding matches */
|
|
if (memcmp(&received->msg, &payload->msg, sizeof(received->msg)) != 0) {
|
|
EFX_ERR(efx, "saw corrupted RX packet in %s loopback test\n",
|
|
LOOPBACK_MODE(efx));
|
|
goto err;
|
|
}
|
|
|
|
/* Check that iteration matches */
|
|
if (received->iteration != payload->iteration) {
|
|
EFX_ERR(efx, "saw RX packet from iteration %d (wanted %d) in "
|
|
"%s loopback test\n", ntohs(received->iteration),
|
|
ntohs(payload->iteration), LOOPBACK_MODE(efx));
|
|
goto err;
|
|
}
|
|
|
|
/* Increase correct RX count */
|
|
EFX_TRACE(efx, "got loopback RX in %s loopback test\n",
|
|
LOOPBACK_MODE(efx));
|
|
|
|
atomic_inc(&state->rx_good);
|
|
return;
|
|
|
|
err:
|
|
#ifdef EFX_ENABLE_DEBUG
|
|
if (atomic_read(&state->rx_bad) == 0) {
|
|
EFX_ERR(efx, "received packet:\n");
|
|
print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 0x10, 1,
|
|
buf_ptr, pkt_len, 0);
|
|
EFX_ERR(efx, "expected packet:\n");
|
|
print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 0x10, 1,
|
|
&state->payload, sizeof(state->payload), 0);
|
|
}
|
|
#endif
|
|
atomic_inc(&state->rx_bad);
|
|
}
|
|
|
|
/* Initialise an efx_selftest_state for a new iteration */
|
|
static void efx_iterate_state(struct efx_nic *efx)
|
|
{
|
|
struct efx_loopback_state *state = efx->loopback_selftest;
|
|
struct net_device *net_dev = efx->net_dev;
|
|
struct efx_loopback_payload *payload = &state->payload;
|
|
|
|
/* Initialise the layerII header */
|
|
memcpy(&payload->header.h_dest, net_dev->dev_addr, ETH_ALEN);
|
|
memcpy(&payload->header.h_source, &payload_source, ETH_ALEN);
|
|
payload->header.h_proto = htons(ETH_P_IP);
|
|
|
|
/* saddr set later and used as incrementing count */
|
|
payload->ip.daddr = htonl(INADDR_LOOPBACK);
|
|
payload->ip.ihl = 5;
|
|
payload->ip.check = htons(0xdead);
|
|
payload->ip.tot_len = htons(sizeof(*payload) - sizeof(struct ethhdr));
|
|
payload->ip.version = IPVERSION;
|
|
payload->ip.protocol = IPPROTO_UDP;
|
|
|
|
/* Initialise udp header */
|
|
payload->udp.source = 0;
|
|
payload->udp.len = htons(sizeof(*payload) - sizeof(struct ethhdr) -
|
|
sizeof(struct iphdr));
|
|
payload->udp.check = 0; /* checksum ignored */
|
|
|
|
/* Fill out payload */
|
|
payload->iteration = htons(ntohs(payload->iteration) + 1);
|
|
memcpy(&payload->msg, payload_msg, sizeof(payload_msg));
|
|
|
|
/* Fill out remaining state members */
|
|
atomic_set(&state->rx_good, 0);
|
|
atomic_set(&state->rx_bad, 0);
|
|
smp_wmb();
|
|
}
|
|
|
|
static int efx_begin_loopback(struct efx_tx_queue *tx_queue)
|
|
{
|
|
struct efx_nic *efx = tx_queue->efx;
|
|
struct efx_loopback_state *state = efx->loopback_selftest;
|
|
struct efx_loopback_payload *payload;
|
|
struct sk_buff *skb;
|
|
int i, rc;
|
|
|
|
/* Transmit N copies of buffer */
|
|
for (i = 0; i < state->packet_count; i++) {
|
|
/* Allocate an skb, holding an extra reference for
|
|
* transmit completion counting */
|
|
skb = alloc_skb(sizeof(state->payload), GFP_KERNEL);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
state->skbs[i] = skb;
|
|
skb_get(skb);
|
|
|
|
/* Copy the payload in, incrementing the source address to
|
|
* exercise the rss vectors */
|
|
payload = ((struct efx_loopback_payload *)
|
|
skb_put(skb, sizeof(state->payload)));
|
|
memcpy(payload, &state->payload, sizeof(state->payload));
|
|
payload->ip.saddr = htonl(INADDR_LOOPBACK | (i << 2));
|
|
|
|
/* Ensure everything we've written is visible to the
|
|
* interrupt handler. */
|
|
smp_wmb();
|
|
|
|
if (efx_dev_registered(efx))
|
|
netif_tx_lock_bh(efx->net_dev);
|
|
rc = efx_xmit(efx, tx_queue, skb);
|
|
if (efx_dev_registered(efx))
|
|
netif_tx_unlock_bh(efx->net_dev);
|
|
|
|
if (rc != NETDEV_TX_OK) {
|
|
EFX_ERR(efx, "TX queue %d could not transmit packet %d "
|
|
"of %d in %s loopback test\n", tx_queue->queue,
|
|
i + 1, state->packet_count, LOOPBACK_MODE(efx));
|
|
|
|
/* Defer cleaning up the other skbs for the caller */
|
|
kfree_skb(skb);
|
|
return -EPIPE;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int efx_poll_loopback(struct efx_nic *efx)
|
|
{
|
|
struct efx_loopback_state *state = efx->loopback_selftest;
|
|
struct efx_channel *channel;
|
|
|
|
/* NAPI polling is not enabled, so process channels
|
|
* synchronously */
|
|
efx_for_each_channel(channel, efx) {
|
|
if (channel->work_pending)
|
|
efx_process_channel_now(channel);
|
|
}
|
|
return atomic_read(&state->rx_good) == state->packet_count;
|
|
}
|
|
|
|
static int efx_end_loopback(struct efx_tx_queue *tx_queue,
|
|
struct efx_loopback_self_tests *lb_tests)
|
|
{
|
|
struct efx_nic *efx = tx_queue->efx;
|
|
struct efx_loopback_state *state = efx->loopback_selftest;
|
|
struct sk_buff *skb;
|
|
int tx_done = 0, rx_good, rx_bad;
|
|
int i, rc = 0;
|
|
|
|
if (efx_dev_registered(efx))
|
|
netif_tx_lock_bh(efx->net_dev);
|
|
|
|
/* Count the number of tx completions, and decrement the refcnt. Any
|
|
* skbs not already completed will be free'd when the queue is flushed */
|
|
for (i=0; i < state->packet_count; i++) {
|
|
skb = state->skbs[i];
|
|
if (skb && !skb_shared(skb))
|
|
++tx_done;
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
|
|
if (efx_dev_registered(efx))
|
|
netif_tx_unlock_bh(efx->net_dev);
|
|
|
|
/* Check TX completion and received packet counts */
|
|
rx_good = atomic_read(&state->rx_good);
|
|
rx_bad = atomic_read(&state->rx_bad);
|
|
if (tx_done != state->packet_count) {
|
|
/* Don't free the skbs; they will be picked up on TX
|
|
* overflow or channel teardown.
|
|
*/
|
|
EFX_ERR(efx, "TX queue %d saw only %d out of an expected %d "
|
|
"TX completion events in %s loopback test\n",
|
|
tx_queue->queue, tx_done, state->packet_count,
|
|
LOOPBACK_MODE(efx));
|
|
rc = -ETIMEDOUT;
|
|
/* Allow to fall through so we see the RX errors as well */
|
|
}
|
|
|
|
/* We may always be up to a flush away from our desired packet total */
|
|
if (rx_good != state->packet_count) {
|
|
EFX_LOG(efx, "TX queue %d saw only %d out of an expected %d "
|
|
"received packets in %s loopback test\n",
|
|
tx_queue->queue, rx_good, state->packet_count,
|
|
LOOPBACK_MODE(efx));
|
|
rc = -ETIMEDOUT;
|
|
/* Fall through */
|
|
}
|
|
|
|
/* Update loopback test structure */
|
|
lb_tests->tx_sent[tx_queue->queue] += state->packet_count;
|
|
lb_tests->tx_done[tx_queue->queue] += tx_done;
|
|
lb_tests->rx_good += rx_good;
|
|
lb_tests->rx_bad += rx_bad;
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int
|
|
efx_test_loopback(struct efx_tx_queue *tx_queue,
|
|
struct efx_loopback_self_tests *lb_tests)
|
|
{
|
|
struct efx_nic *efx = tx_queue->efx;
|
|
struct efx_loopback_state *state = efx->loopback_selftest;
|
|
int i, begin_rc, end_rc;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
/* Determine how many packets to send */
|
|
state->packet_count = (efx->type->txd_ring_mask + 1) / 3;
|
|
state->packet_count = min(1 << (i << 2), state->packet_count);
|
|
state->skbs = kzalloc(sizeof(state->skbs[0]) *
|
|
state->packet_count, GFP_KERNEL);
|
|
if (!state->skbs)
|
|
return -ENOMEM;
|
|
state->flush = false;
|
|
|
|
EFX_LOG(efx, "TX queue %d testing %s loopback with %d "
|
|
"packets\n", tx_queue->queue, LOOPBACK_MODE(efx),
|
|
state->packet_count);
|
|
|
|
efx_iterate_state(efx);
|
|
begin_rc = efx_begin_loopback(tx_queue);
|
|
|
|
/* This will normally complete very quickly, but be
|
|
* prepared to wait up to 100 ms. */
|
|
msleep(1);
|
|
if (!efx_poll_loopback(efx)) {
|
|
msleep(100);
|
|
efx_poll_loopback(efx);
|
|
}
|
|
|
|
end_rc = efx_end_loopback(tx_queue, lb_tests);
|
|
kfree(state->skbs);
|
|
|
|
if (begin_rc || end_rc) {
|
|
/* Wait a while to ensure there are no packets
|
|
* floating around after a failure. */
|
|
schedule_timeout_uninterruptible(HZ / 10);
|
|
return begin_rc ? begin_rc : end_rc;
|
|
}
|
|
}
|
|
|
|
EFX_LOG(efx, "TX queue %d passed %s loopback test with a burst length "
|
|
"of %d packets\n", tx_queue->queue, LOOPBACK_MODE(efx),
|
|
state->packet_count);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int efx_test_loopbacks(struct efx_nic *efx, struct efx_self_tests *tests,
|
|
unsigned int loopback_modes)
|
|
{
|
|
enum efx_loopback_mode mode;
|
|
struct efx_loopback_state *state;
|
|
struct efx_tx_queue *tx_queue;
|
|
bool link_up;
|
|
int count, rc = 0;
|
|
|
|
/* Set the port loopback_selftest member. From this point on
|
|
* all received packets will be dropped. Mark the state as
|
|
* "flushing" so all inflight packets are dropped */
|
|
state = kzalloc(sizeof(*state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
return -ENOMEM;
|
|
BUG_ON(efx->loopback_selftest);
|
|
state->flush = true;
|
|
efx->loopback_selftest = state;
|
|
|
|
/* Test all supported loopback modes */
|
|
for (mode = LOOPBACK_NONE; mode <= LOOPBACK_TEST_MAX; mode++) {
|
|
if (!(loopback_modes & (1 << mode)))
|
|
continue;
|
|
|
|
/* Move the port into the specified loopback mode. */
|
|
state->flush = true;
|
|
efx->loopback_mode = mode;
|
|
efx_reconfigure_port(efx);
|
|
|
|
/* Wait for the PHY to signal the link is up. Interrupts
|
|
* are enabled for PHY's using LASI, otherwise we poll()
|
|
* quickly */
|
|
count = 0;
|
|
do {
|
|
struct efx_channel *channel = &efx->channel[0];
|
|
|
|
efx->phy_op->poll(efx);
|
|
schedule_timeout_uninterruptible(HZ / 10);
|
|
if (channel->work_pending)
|
|
efx_process_channel_now(channel);
|
|
/* Wait for PHY events to be processed */
|
|
flush_workqueue(efx->workqueue);
|
|
rmb();
|
|
|
|
/* We need both the phy and xaui links to be ok.
|
|
* rather than relying on the falcon_xmac irq/poll
|
|
* regime, just poll xaui directly */
|
|
link_up = efx->link_up;
|
|
if (link_up && EFX_IS10G(efx) &&
|
|
!falcon_xaui_link_ok(efx))
|
|
link_up = false;
|
|
|
|
} while ((++count < 20) && !link_up);
|
|
|
|
/* The link should now be up. If it isn't, there is no point
|
|
* in attempting a loopback test */
|
|
if (!link_up) {
|
|
EFX_ERR(efx, "loopback %s never came up\n",
|
|
LOOPBACK_MODE(efx));
|
|
rc = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
EFX_LOG(efx, "link came up in %s loopback in %d iterations\n",
|
|
LOOPBACK_MODE(efx), count);
|
|
|
|
/* Test every TX queue */
|
|
efx_for_each_tx_queue(tx_queue, efx) {
|
|
state->offload_csum = (tx_queue->queue ==
|
|
EFX_TX_QUEUE_OFFLOAD_CSUM);
|
|
rc = efx_test_loopback(tx_queue,
|
|
&tests->loopback[mode]);
|
|
if (rc)
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
out:
|
|
/* Remove the flush. The caller will remove the loopback setting */
|
|
state->flush = true;
|
|
efx->loopback_selftest = NULL;
|
|
wmb();
|
|
kfree(state);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Entry point
|
|
*
|
|
*************************************************************************/
|
|
|
|
int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests,
|
|
unsigned flags)
|
|
{
|
|
enum efx_loopback_mode loopback_mode = efx->loopback_mode;
|
|
int phy_mode = efx->phy_mode;
|
|
enum reset_type reset_method = RESET_TYPE_INVISIBLE;
|
|
struct ethtool_cmd ecmd;
|
|
struct efx_channel *channel;
|
|
int rc_test = 0, rc_reset = 0, rc;
|
|
|
|
/* Online (i.e. non-disruptive) testing
|
|
* This checks interrupt generation, event delivery and PHY presence. */
|
|
|
|
rc = efx_test_mii(efx, tests);
|
|
if (rc && !rc_test)
|
|
rc_test = rc;
|
|
|
|
rc = efx_test_nvram(efx, tests);
|
|
if (rc && !rc_test)
|
|
rc_test = rc;
|
|
|
|
rc = efx_test_interrupts(efx, tests);
|
|
if (rc && !rc_test)
|
|
rc_test = rc;
|
|
|
|
efx_for_each_channel(channel, efx) {
|
|
rc = efx_test_eventq_irq(channel, tests);
|
|
if (rc && !rc_test)
|
|
rc_test = rc;
|
|
}
|
|
|
|
if (rc_test)
|
|
return rc_test;
|
|
|
|
if (!(flags & ETH_TEST_FL_OFFLINE))
|
|
return efx_test_phy(efx, tests, flags);
|
|
|
|
/* Offline (i.e. disruptive) testing
|
|
* This checks MAC and PHY loopback on the specified port. */
|
|
|
|
/* force the carrier state off so the kernel doesn't transmit during
|
|
* the loopback test, and the watchdog timeout doesn't fire. Also put
|
|
* falcon into loopback for the register test.
|
|
*/
|
|
mutex_lock(&efx->mac_lock);
|
|
efx->port_inhibited = true;
|
|
if (efx->loopback_modes) {
|
|
/* We need the 312 clock from the PHY to test the XMAC
|
|
* registers, so move into XGMII loopback if available */
|
|
if (efx->loopback_modes & (1 << LOOPBACK_XGMII))
|
|
efx->loopback_mode = LOOPBACK_XGMII;
|
|
else
|
|
efx->loopback_mode = __ffs(efx->loopback_modes);
|
|
}
|
|
|
|
__efx_reconfigure_port(efx);
|
|
mutex_unlock(&efx->mac_lock);
|
|
|
|
/* free up all consumers of SRAM (including all the queues) */
|
|
efx_reset_down(efx, reset_method, &ecmd);
|
|
|
|
rc = efx_test_chip(efx, tests);
|
|
if (rc && !rc_test)
|
|
rc_test = rc;
|
|
|
|
/* reset the chip to recover from the register test */
|
|
rc_reset = falcon_reset_hw(efx, reset_method);
|
|
|
|
/* Ensure that the phy is powered and out of loopback
|
|
* for the bist and loopback tests */
|
|
efx->phy_mode &= ~PHY_MODE_LOW_POWER;
|
|
efx->loopback_mode = LOOPBACK_NONE;
|
|
|
|
rc = efx_reset_up(efx, reset_method, &ecmd, rc_reset == 0);
|
|
if (rc && !rc_reset)
|
|
rc_reset = rc;
|
|
|
|
if (rc_reset) {
|
|
EFX_ERR(efx, "Unable to recover from chip test\n");
|
|
efx_schedule_reset(efx, RESET_TYPE_DISABLE);
|
|
return rc_reset;
|
|
}
|
|
|
|
rc = efx_test_phy(efx, tests, flags);
|
|
if (rc && !rc_test)
|
|
rc_test = rc;
|
|
|
|
rc = efx_test_loopbacks(efx, tests, efx->loopback_modes);
|
|
if (rc && !rc_test)
|
|
rc_test = rc;
|
|
|
|
/* restore the PHY to the previous state */
|
|
efx->loopback_mode = loopback_mode;
|
|
efx->phy_mode = phy_mode;
|
|
efx->port_inhibited = false;
|
|
efx_ethtool_set_settings(efx->net_dev, &ecmd);
|
|
|
|
return rc_test;
|
|
}
|
|
|