linux/arch/mips/kernel/genex.S
Maciej W. Rozycki 619b6e18fc [MIPS] R4000/R4400 daddiu erratum workaround
This complements the generic R4000/R4400 errata workaround code and adds 
bits for the daddiu problem.  In most places it just modifies handwritten 
assembly code so that the assembler is allowed to use a temporary register 
as daddiu may now be treated as a macro that expands to a sequence of li 
and daddu.  It is the AT register or, where AT is unavailable or used 
explicitly for another purpose, an explicitly-named register is selected, 
using the .set at=<reg> feature added recently to gas.  This feature is 
only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the 
workaround remains disabled, the required version of binutils stays 
unchanged.

 Similarly, daddiu instructions put in branch delay slots in noreorder 
fragments are now taken out of them and the assembler is allowed to 
reorder them itself as possible (which it does making the whole idea of 
scheduling them into delay slots manually questionable).

 Also in the very few places where such a simple conversion was not 
possible, a handcoded longer sequence is implemented.

 Other than that there are changes to code responsible for building the 
TLB fault and page clear/copy handlers to avoid daddiu as appropriate.  
These are only effective if the erratum is verified to be present at the 
run time.

 Finally there is a trivial update to __delay(), because it uses daddiu in 
a branch delay slot.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:55 +00:00

499 lines
11 KiB
ArmAsm

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1994 - 2000, 2001, 2003 Ralf Baechle
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
* Copyright (C) 2001 MIPS Technologies, Inc.
* Copyright (C) 2002, 2007 Maciej W. Rozycki
*/
#include <linux/init.h>
#include <asm/asm.h>
#include <asm/asmmacro.h>
#include <asm/cacheops.h>
#include <asm/irqflags.h>
#include <asm/regdef.h>
#include <asm/fpregdef.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
#include <asm/war.h>
#include <asm/page.h>
#define PANIC_PIC(msg) \
.set push; \
.set reorder; \
PTR_LA a0,8f; \
.set noat; \
PTR_LA AT, panic; \
jr AT; \
9: b 9b; \
.set pop; \
TEXT(msg)
__INIT
NESTED(except_vec0_generic, 0, sp)
PANIC_PIC("Exception vector 0 called")
END(except_vec0_generic)
NESTED(except_vec1_generic, 0, sp)
PANIC_PIC("Exception vector 1 called")
END(except_vec1_generic)
/*
* General exception vector for all other CPUs.
*
* Be careful when changing this, it has to be at most 128 bytes
* to fit into space reserved for the exception handler.
*/
NESTED(except_vec3_generic, 0, sp)
.set push
.set noat
#if R5432_CP0_INTERRUPT_WAR
mfc0 k0, CP0_INDEX
#endif
mfc0 k1, CP0_CAUSE
andi k1, k1, 0x7c
#ifdef CONFIG_64BIT
dsll k1, k1, 1
#endif
PTR_L k0, exception_handlers(k1)
jr k0
.set pop
END(except_vec3_generic)
/*
* General exception handler for CPUs with virtual coherency exception.
*
* Be careful when changing this, it has to be at most 256 (as a special
* exception) bytes to fit into space reserved for the exception handler.
*/
NESTED(except_vec3_r4000, 0, sp)
.set push
.set mips3
.set noat
mfc0 k1, CP0_CAUSE
li k0, 31<<2
andi k1, k1, 0x7c
.set push
.set noreorder
.set nomacro
beq k1, k0, handle_vced
li k0, 14<<2
beq k1, k0, handle_vcei
#ifdef CONFIG_64BIT
dsll k1, k1, 1
#endif
.set pop
PTR_L k0, exception_handlers(k1)
jr k0
/*
* Big shit, we now may have two dirty primary cache lines for the same
* physical address. We can safely invalidate the line pointed to by
* c0_badvaddr because after return from this exception handler the
* load / store will be re-executed.
*/
handle_vced:
MFC0 k0, CP0_BADVADDR
li k1, -4 # Is this ...
and k0, k1 # ... really needed?
mtc0 zero, CP0_TAGLO
cache Index_Store_Tag_D, (k0)
cache Hit_Writeback_Inv_SD, (k0)
#ifdef CONFIG_PROC_FS
PTR_LA k0, vced_count
lw k1, (k0)
addiu k1, 1
sw k1, (k0)
#endif
eret
handle_vcei:
MFC0 k0, CP0_BADVADDR
cache Hit_Writeback_Inv_SD, (k0) # also cleans pi
#ifdef CONFIG_PROC_FS
PTR_LA k0, vcei_count
lw k1, (k0)
addiu k1, 1
sw k1, (k0)
#endif
eret
.set pop
END(except_vec3_r4000)
__FINIT
.align 5
NESTED(handle_int, PT_SIZE, sp)
#ifdef CONFIG_TRACE_IRQFLAGS
/*
* Check to see if the interrupted code has just disabled
* interrupts and ignore this interrupt for now if so.
*
* local_irq_disable() disables interrupts and then calls
* trace_hardirqs_off() to track the state. If an interrupt is taken
* after interrupts are disabled but before the state is updated
* it will appear to restore_all that it is incorrectly returning with
* interrupts disabled
*/
.set push
.set noat
mfc0 k0, CP0_STATUS
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
and k0, ST0_IEP
bnez k0, 1f
mfc0 k0, CP0_EPC
.set noreorder
j k0
rfe
#else
and k0, ST0_IE
bnez k0, 1f
eret
#endif
1:
.set pop
#endif
SAVE_ALL
CLI
TRACE_IRQS_OFF
LONG_L s0, TI_REGS($28)
LONG_S sp, TI_REGS($28)
PTR_LA ra, ret_from_irq
j plat_irq_dispatch
END(handle_int)
__INIT
/*
* Special interrupt vector for MIPS64 ISA & embedded MIPS processors.
* This is a dedicated interrupt exception vector which reduces the
* interrupt processing overhead. The jump instruction will be replaced
* at the initialization time.
*
* Be careful when changing this, it has to be at most 128 bytes
* to fit into space reserved for the exception handler.
*/
NESTED(except_vec4, 0, sp)
1: j 1b /* Dummy, will be replaced */
END(except_vec4)
/*
* EJTAG debug exception handler.
* The EJTAG debug exception entry point is 0xbfc00480, which
* normally is in the boot PROM, so the boot PROM must do a
* unconditional jump to this vector.
*/
NESTED(except_vec_ejtag_debug, 0, sp)
j ejtag_debug_handler
END(except_vec_ejtag_debug)
__FINIT
/*
* Vectored interrupt handler.
* This prototype is copied to ebase + n*IntCtl.VS and patched
* to invoke the handler
*/
NESTED(except_vec_vi, 0, sp)
SAVE_SOME
SAVE_AT
.set push
.set noreorder
#ifdef CONFIG_MIPS_MT_SMTC
/*
* To keep from blindly blocking *all* interrupts
* during service by SMTC kernel, we also want to
* pass the IM value to be cleared.
*/
FEXPORT(except_vec_vi_mori)
ori a0, $0, 0
#endif /* CONFIG_MIPS_MT_SMTC */
FEXPORT(except_vec_vi_lui)
lui v0, 0 /* Patched */
j except_vec_vi_handler
FEXPORT(except_vec_vi_ori)
ori v0, 0 /* Patched */
.set pop
END(except_vec_vi)
EXPORT(except_vec_vi_end)
/*
* Common Vectored Interrupt code
* Complete the register saves and invoke the handler which is passed in $v0
*/
NESTED(except_vec_vi_handler, 0, sp)
SAVE_TEMP
SAVE_STATIC
#ifdef CONFIG_MIPS_MT_SMTC
/*
* SMTC has an interesting problem that interrupts are level-triggered,
* and the CLI macro will clear EXL, potentially causing a duplicate
* interrupt service invocation. So we need to clear the associated
* IM bit of Status prior to doing CLI, and restore it after the
* service routine has been invoked - we must assume that the
* service routine will have cleared the state, and any active
* level represents a new or otherwised unserviced event...
*/
mfc0 t1, CP0_STATUS
and t0, a0, t1
#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
mfc0 t2, CP0_TCCONTEXT
or t0, t0, t2
mtc0 t0, CP0_TCCONTEXT
#endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
xor t1, t1, t0
mtc0 t1, CP0_STATUS
_ehb
#endif /* CONFIG_MIPS_MT_SMTC */
CLI
#ifdef CONFIG_TRACE_IRQFLAGS
move s0, v0
#ifdef CONFIG_MIPS_MT_SMTC
move s1, a0
#endif
TRACE_IRQS_OFF
#ifdef CONFIG_MIPS_MT_SMTC
move a0, s1
#endif
move v0, s0
#endif
LONG_L s0, TI_REGS($28)
LONG_S sp, TI_REGS($28)
PTR_LA ra, ret_from_irq
jr v0
END(except_vec_vi_handler)
/*
* EJTAG debug exception handler.
*/
NESTED(ejtag_debug_handler, PT_SIZE, sp)
.set push
.set noat
MTC0 k0, CP0_DESAVE
mfc0 k0, CP0_DEBUG
sll k0, k0, 30 # Check for SDBBP.
bgez k0, ejtag_return
PTR_LA k0, ejtag_debug_buffer
LONG_S k1, 0(k0)
SAVE_ALL
move a0, sp
jal ejtag_exception_handler
RESTORE_ALL
PTR_LA k0, ejtag_debug_buffer
LONG_L k1, 0(k0)
ejtag_return:
MFC0 k0, CP0_DESAVE
.set mips32
deret
.set pop
END(ejtag_debug_handler)
/*
* This buffer is reserved for the use of the EJTAG debug
* handler.
*/
.data
EXPORT(ejtag_debug_buffer)
.fill LONGSIZE
.previous
__INIT
/*
* NMI debug exception handler for MIPS reference boards.
* The NMI debug exception entry point is 0xbfc00000, which
* normally is in the boot PROM, so the boot PROM must do a
* unconditional jump to this vector.
*/
NESTED(except_vec_nmi, 0, sp)
j nmi_handler
END(except_vec_nmi)
__FINIT
NESTED(nmi_handler, PT_SIZE, sp)
.set push
.set noat
SAVE_ALL
move a0, sp
jal nmi_exception_handler
RESTORE_ALL
.set mips3
eret
.set pop
END(nmi_handler)
.macro __build_clear_none
.endm
.macro __build_clear_sti
TRACE_IRQS_ON
STI
.endm
.macro __build_clear_cli
CLI
TRACE_IRQS_OFF
.endm
.macro __build_clear_fpe
cfc1 a1, fcr31
li a2, ~(0x3f << 12)
and a2, a1
ctc1 a2, fcr31
TRACE_IRQS_ON
STI
.endm
.macro __build_clear_ade
MFC0 t0, CP0_BADVADDR
PTR_S t0, PT_BVADDR(sp)
KMODE
.endm
.macro __BUILD_silent exception
.endm
/* Gas tries to parse the PRINT argument as a string containing
string escapes and emits bogus warnings if it believes to
recognize an unknown escape code. So make the arguments
start with an n and gas will believe \n is ok ... */
.macro __BUILD_verbose nexception
LONG_L a1, PT_EPC(sp)
#ifdef CONFIG_32BIT
PRINT("Got \nexception at %08lx\012")
#endif
#ifdef CONFIG_64BIT
PRINT("Got \nexception at %016lx\012")
#endif
.endm
.macro __BUILD_count exception
LONG_L t0,exception_count_\exception
LONG_ADDIU t0, 1
LONG_S t0,exception_count_\exception
.comm exception_count\exception, 8, 8
.endm
.macro __BUILD_HANDLER exception handler clear verbose ext
.align 5
NESTED(handle_\exception, PT_SIZE, sp)
.set noat
SAVE_ALL
FEXPORT(handle_\exception\ext)
__BUILD_clear_\clear
.set at
__BUILD_\verbose \exception
move a0, sp
PTR_LA ra, ret_from_exception
j do_\handler
END(handle_\exception)
.endm
.macro BUILD_HANDLER exception handler clear verbose
__BUILD_HANDLER \exception \handler \clear \verbose _int
.endm
BUILD_HANDLER adel ade ade silent /* #4 */
BUILD_HANDLER ades ade ade silent /* #5 */
BUILD_HANDLER ibe be cli silent /* #6 */
BUILD_HANDLER dbe be cli silent /* #7 */
BUILD_HANDLER bp bp sti silent /* #9 */
BUILD_HANDLER ri ri sti silent /* #10 */
BUILD_HANDLER cpu cpu sti silent /* #11 */
BUILD_HANDLER ov ov sti silent /* #12 */
BUILD_HANDLER tr tr sti silent /* #13 */
BUILD_HANDLER fpe fpe fpe silent /* #15 */
BUILD_HANDLER mdmx mdmx sti silent /* #22 */
BUILD_HANDLER watch watch sti verbose /* #23 */
BUILD_HANDLER mcheck mcheck cli verbose /* #24 */
BUILD_HANDLER mt mt sti silent /* #25 */
BUILD_HANDLER dsp dsp sti silent /* #26 */
BUILD_HANDLER reserved reserved sti verbose /* others */
.align 5
LEAF(handle_ri_rdhwr_vivt)
#ifdef CONFIG_MIPS_MT_SMTC
PANIC_PIC("handle_ri_rdhwr_vivt called")
#else
.set push
.set noat
.set noreorder
/* check if TLB contains a entry for EPC */
MFC0 k1, CP0_ENTRYHI
andi k1, 0xff /* ASID_MASK */
MFC0 k0, CP0_EPC
PTR_SRL k0, PAGE_SHIFT + 1
PTR_SLL k0, PAGE_SHIFT + 1
or k1, k0
MTC0 k1, CP0_ENTRYHI
mtc0_tlbw_hazard
tlbp
tlb_probe_hazard
mfc0 k1, CP0_INDEX
.set pop
bltz k1, handle_ri /* slow path */
/* fall thru */
#endif
END(handle_ri_rdhwr_vivt)
LEAF(handle_ri_rdhwr)
.set push
.set noat
.set noreorder
/* 0x7c03e83b: rdhwr v1,$29 */
MFC0 k1, CP0_EPC
lui k0, 0x7c03
lw k1, (k1)
ori k0, 0xe83b
.set reorder
bne k0, k1, handle_ri /* if not ours */
/* The insn is rdhwr. No need to check CAUSE.BD here. */
get_saved_sp /* k1 := current_thread_info */
.set noreorder
MFC0 k0, CP0_EPC
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
ori k1, _THREAD_MASK
xori k1, _THREAD_MASK
LONG_L v1, TI_TP_VALUE(k1)
LONG_ADDIU k0, 4
jr k0
rfe
#else
#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
LONG_ADDIU k0, 4 /* stall on $k0 */
#else
.set at=v1
LONG_ADDIU k0, 4
.set noat
#endif
MTC0 k0, CP0_EPC
/* I hope three instructions between MTC0 and ERET are enough... */
ori k1, _THREAD_MASK
xori k1, _THREAD_MASK
LONG_L v1, TI_TP_VALUE(k1)
.set mips3
eret
.set mips0
#endif
.set pop
END(handle_ri_rdhwr)
#ifdef CONFIG_64BIT
/* A temporary overflow handler used by check_daddi(). */
__INIT
BUILD_HANDLER daddi_ov daddi_ov none silent /* #12 */
#endif