linux/drivers/scsi/isci/port.h

307 lines
9.1 KiB
C

/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _ISCI_PORT_H_
#define _ISCI_PORT_H_
#include <scsi/libsas.h>
#include "isci.h"
#include "sas.h"
#include "phy.h"
#define SCIC_SDS_DUMMY_PORT 0xFF
struct isci_phy;
struct isci_host;
enum isci_status {
isci_freed = 0x00,
isci_starting = 0x01,
isci_ready = 0x02,
isci_ready_for_io = 0x03,
isci_stopping = 0x04,
isci_stopped = 0x05,
};
/**
* struct isci_port - isci direct attached sas port object
* @event: counts bcns and port stop events (for bcn filtering)
* @ready_exit: several states constitute 'ready'. When exiting ready we
* need to take extra port-teardown actions that are
* skipped when exiting to another 'ready' state.
* @logical_port_index: software port index
* @physical_port_index: hardware port index
* @active_phy_mask: identifies phy members
* @reserved_tag:
* @reserved_rni: reserver for port task scheduler workaround
* @started_request_count: reference count for outstanding commands
* @not_ready_reason: set during state transitions and notified
* @timer: timeout start/stop operations
*/
struct isci_port {
enum isci_status status;
#define IPORT_BCN_BLOCKED 0
#define IPORT_BCN_PENDING 1
unsigned long flags;
atomic_t event;
struct isci_host *isci_host;
struct asd_sas_port sas_port;
struct list_head remote_dev_list;
spinlock_t state_lock;
struct list_head domain_dev_list;
struct completion start_complete;
struct completion hard_reset_complete;
enum sci_status hard_reset_status;
struct sci_base_state_machine sm;
bool ready_exit;
u8 logical_port_index;
u8 physical_port_index;
u8 active_phy_mask;
u16 reserved_rni;
u16 reserved_tag;
u32 started_request_count;
u32 assigned_device_count;
u32 not_ready_reason;
struct isci_phy *phy_table[SCI_MAX_PHYS];
struct isci_host *owning_controller;
struct sci_timer timer;
struct scu_port_task_scheduler_registers __iomem *port_task_scheduler_registers;
/* XXX rework: only one register, no need to replicate per-port */
u32 __iomem *port_pe_configuration_register;
struct scu_viit_entry __iomem *viit_registers;
};
enum sci_port_not_ready_reason_code {
SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS,
SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED,
SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION,
SCIC_PORT_NOT_READY_RECONFIGURING,
SCIC_PORT_NOT_READY_REASON_CODE_MAX
};
struct sci_port_end_point_properties {
struct sci_sas_address sas_address;
struct sci_phy_proto protocols;
};
struct sci_port_properties {
u32 index;
struct sci_port_end_point_properties local;
struct sci_port_end_point_properties remote;
u32 phy_mask;
};
/**
* enum sci_port_states - This enumeration depicts all the states for the
* common port state machine.
*
*
*/
enum sci_port_states {
/**
* This state indicates that the port has successfully been stopped.
* In this state no new IO operations are permitted.
* This state is entered from the STOPPING state.
*/
SCI_PORT_STOPPED,
/**
* This state indicates that the port is in the process of stopping.
* In this state no new IO operations are permitted, but existing IO
* operations are allowed to complete.
* This state is entered from the READY state.
*/
SCI_PORT_STOPPING,
/**
* This state indicates the port is now ready. Thus, the user is
* able to perform IO operations on this port.
* This state is entered from the STARTING state.
*/
SCI_PORT_READY,
/**
* The substate where the port is started and ready but has no
* active phys.
*/
SCI_PORT_SUB_WAITING,
/**
* The substate where the port is started and ready and there is
* at least one phy operational.
*/
SCI_PORT_SUB_OPERATIONAL,
/**
* The substate where the port is started and there was an
* add/remove phy event. This state is only used in Automatic
* Port Configuration Mode (APC)
*/
SCI_PORT_SUB_CONFIGURING,
/**
* This state indicates the port is in the process of performing a hard
* reset. Thus, the user is unable to perform IO operations on this
* port.
* This state is entered from the READY state.
*/
SCI_PORT_RESETTING,
/**
* This state indicates the port has failed a reset request. This state
* is entered when a port reset request times out.
* This state is entered from the RESETTING state.
*/
SCI_PORT_FAILED,
};
static inline void sci_port_decrement_request_count(struct isci_port *iport)
{
if (WARN_ONCE(iport->started_request_count == 0,
"%s: tried to decrement started_request_count past 0!?",
__func__))
/* pass */;
else
iport->started_request_count--;
}
#define sci_port_active_phy(port, phy) \
(((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0)
void sci_port_construct(
struct isci_port *iport,
u8 port_index,
struct isci_host *ihost);
enum sci_status sci_port_start(struct isci_port *iport);
enum sci_status sci_port_stop(struct isci_port *iport);
enum sci_status sci_port_add_phy(
struct isci_port *iport,
struct isci_phy *iphy);
enum sci_status sci_port_remove_phy(
struct isci_port *iport,
struct isci_phy *iphy);
void sci_port_setup_transports(
struct isci_port *iport,
u32 device_id);
void isci_port_bcn_enable(struct isci_host *, struct isci_port *);
void sci_port_deactivate_phy(
struct isci_port *iport,
struct isci_phy *iphy,
bool do_notify_user);
bool sci_port_link_detected(
struct isci_port *iport,
struct isci_phy *iphy);
enum sci_status sci_port_link_up(struct isci_port *iport,
struct isci_phy *iphy);
enum sci_status sci_port_link_down(struct isci_port *iport,
struct isci_phy *iphy);
struct isci_request;
struct isci_remote_device;
enum sci_status sci_port_start_io(
struct isci_port *iport,
struct isci_remote_device *idev,
struct isci_request *ireq);
enum sci_status sci_port_complete_io(
struct isci_port *iport,
struct isci_remote_device *idev,
struct isci_request *ireq);
enum sas_linkrate sci_port_get_max_allowed_speed(
struct isci_port *iport);
void sci_port_broadcast_change_received(
struct isci_port *iport,
struct isci_phy *iphy);
bool sci_port_is_valid_phy_assignment(
struct isci_port *iport,
u32 phy_index);
void sci_port_get_sas_address(
struct isci_port *iport,
struct sci_sas_address *sas_address);
void sci_port_get_attached_sas_address(
struct isci_port *iport,
struct sci_sas_address *sas_address);
enum isci_status isci_port_get_state(
struct isci_port *isci_port);
void isci_port_formed(struct asd_sas_phy *);
void isci_port_deformed(struct asd_sas_phy *);
void isci_port_init(
struct isci_port *port,
struct isci_host *host,
int index);
int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport,
struct isci_phy *iphy);
#endif /* !defined(_ISCI_PORT_H_) */