q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/drivers/tty/serial
History
Deepak K c86845db77 ARM: OMAP2+: UART: Allow UART parameters to be configured from board file. 
The following UART parameters are defined within the UART driver:

1). Whether the UART uses DMA (dma_enabled), by default set to 0
2). The size of dma buffer (set to 4096 bytes)
3). The time after which the dma should stop if no more data is received.
4). The auto suspend delay that will be passed for pm_runtime_autosuspend
    where uart will be disabled after timeout

Different UARTs may be used for different purpose such as the console,
for interfacing bluetooth chip, for interfacing to a modem chip, etc.
Therefore, it is necessary to be able to customize the above settings
for a given board on a per UART basis.

This change allows these parameters to be configured from the board file
and allows the parameters to be configured for each UART independently.

If a board does not define its own custom parameters for the UARTs, then
use the default parameters in the structure "omap_serial_default_info".
The default parameters are defined to be the same as the current settings
in the UART driver to avoid breaking the UART for any cuurnelty supported
boards. By default, make all boards use the default UART parameters.

Signed-off-by: Deepak K <deepak.k@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> (for drivers/tty changes)
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-12-14 16:05:24 -08:00
..
cpm_uart TTY: serial, fix includes in some drivers 2011-09-22 15:49:26 -07:00
jsm tty: Add module.h to drivers/tty users who just expect it there. 2011-10-31 19:31:27 -04:00
8250.c Revert "tty/serial: Prevent drop of DCD on suspend for Tegra UARTs" 2011-11-15 16:01:09 -08:00
8250.h Revert "tty/serial: Prevent drop of DCD on suspend for Tegra UARTs" 2011-11-15 16:01:09 -08:00
8250_accent.c tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
8250_acorn.c
8250_boca.c tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
8250_dw.c tty: add a DesignWare 8250 driver 2011-08-26 11:38:46 -07:00
8250_early.c
8250_exar_st16c554.c tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
8250_fourport.c tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
8250_gsc.c
8250_hp300.c
8250_hub6.c tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
8250_mca.c tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
8250_pci.c Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2011-10-26 15:11:09 +02:00
8250_pnp.c serial: 8250_pnp: add Intermec CV60 touchscreen device 2011-08-22 14:18:44 -07:00
21285.c tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
68328serial.c TTY: irq: Remove IRQF_DISABLED 2011-09-22 16:08:57 -07:00
68328serial.h TTY: serial, remove dead code from 68328 2011-09-22 15:47:54 -07:00
altera_jtaguart.c Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6 2011-10-27 08:35:41 +02:00
altera_uart.c Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6 2011-10-27 08:35:41 +02:00
amba-pl010.c clk: amba-pl010: convert to clk_prepare()/clk_unprepare() 2011-09-27 09:25:52 +01:00
amba-pl011.c clk: amba-pl011: convert to clk_prepare()/clk_unprepare() 2011-09-27 09:25:52 +01:00
apbuart.c TTY: serial, fix includes in some drivers 2011-09-22 15:49:26 -07:00
apbuart.h
atmel_serial.c RS485: fix inconsistencies in the meaning of some variables 2011-11-15 12:13:44 -08:00
bcm63xx_uart.c serial: bcm63xx_uart: fix irq storm after rx fifo overrun. 2011-06-16 12:01:58 -07:00
bfin_sport_uart.c TTY: irq: Remove IRQF_DISABLED 2011-09-22 16:08:57 -07:00
bfin_sport_uart.h
bfin_uart.c TTY: irq: Remove IRQF_DISABLED 2011-09-22 16:08:57 -07:00
clps711x.c tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
crisv10.c RS485: fix inconsistencies in the meaning of some variables 2011-11-15 12:13:44 -08:00
crisv10.h
dz.c TTY: serial, fix includes in some drivers 2011-09-22 15:49:26 -07:00
dz.h
icom.c TTY: irq: Remove IRQF_DISABLED 2011-09-22 16:08:57 -07:00
icom.h
ifx6x60.c net: remove mm.h inclusion from netdevice.h 2011-06-21 19:17:20 -07:00
ifx6x60.h serial: ifx6x60: minor cleanup 2011-02-17 11:16:15 -08:00
imx.c Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6 2011-10-27 08:35:41 +02:00
ioc3_serial.c TTY: serial, fix includes in some drivers 2011-09-22 15:49:26 -07:00
ioc4_serial.c TTY: serial, fix includes in some drivers 2011-09-22 15:49:26 -07:00
ip22zilog.c Fix common misspellings 2011-03-31 11:26:23 -03:00
ip22zilog.h
Kconfig pch_uart: Support new device LAPIS Semiconductor ML7831 IOH 2011-11-15 12:04:12 -08:00
kgdboc.c tty: Add module.h to drivers/tty users who just expect it there. 2011-10-31 19:31:27 -04:00
lantiq.c Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2011-10-26 15:11:09 +02:00
m32r_sio.c TTY: serial, fix includes in some drivers 2011-09-22 15:49:26 -07:00
m32r_sio.h
m32r_sio_reg.h
Makefile TTY: serial, move 68360 driver to staging 2011-09-22 16:00:20 -07:00
max3100.c tty: Add module.h to drivers/tty users who just expect it there. 2011-10-31 19:31:27 -04:00
max3107-aava.c tty: Add module.h to drivers/tty users who just expect it there. 2011-10-31 19:31:27 -04:00
max3107.c tty: Add module.h to drivers/tty users who just expect it there. 2011-10-31 19:31:27 -04:00
max3107.h Fix common misspellings 2011-03-31 11:26:23 -03:00
mcf.c TTY: irq: Remove IRQF_DISABLED 2011-09-22 16:08:57 -07:00
mfd.c serial,mfd: Fix CMSPAR setup 2011-11-15 12:13:42 -08:00
mpc52xx_uart.c TTY: irq: Remove IRQF_DISABLED 2011-09-22 16:08:57 -07:00
mpsc.c
mrst_max3110.c Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2011-10-26 15:11:09 +02:00
mrst_max3110.h max3110: add sysrq support 2011-08-26 11:01:15 -07:00
msm_serial.c Merge branch 'next/dt' of git://git.linaro.org/people/arnd/arm-soc 2011-11-01 21:02:35 -07:00
msm_serial.h tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
msm_serial_hs.c TTY: serial, fix includes in some drivers 2011-09-22 15:49:26 -07:00
msm_smd_tty.c tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
mux.c TTY: serial, fix includes in some drivers 2011-09-22 15:49:26 -07:00
mxs-auart.c Freescale STMP37XX/STMP378X Application UART driver: remove duplicate linux/device.h include 2011-02-15 18:35:42 +01:00
netx-serial.c tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
nwpserial.c tty: Add export.h for EXPORT_SYMBOL/THIS_MODULE to exporters 2011-10-31 19:31:28 -04:00
of_serial.c drivercore: Add helper macro for platform_driver boilerplate 2011-10-25 00:35:47 +02:00
omap-serial.c ARM: OMAP2+: UART: Allow UART parameters to be configured from board file. 2011-12-14 16:05:24 -08:00
pch_uart.c pch_uart: Fix DMA resource leak issue 2011-11-15 12:13:43 -08:00
pmac_zilog.c tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c serial: pxa: work around for errata #20 2011-09-22 15:47:53 -07:00
s3c2410.c serial: Remove redundant console_initcall from s3c and s5p console drivers 2011-07-20 19:10:43 +09:00
s3c2412.c serial: Remove redundant console_initcall from s3c and s5p console drivers 2011-07-20 19:10:43 +09:00
s3c2440.c serial: Remove redundant console_initcall from s3c and s5p console drivers 2011-07-20 19:10:43 +09:00
s3c6400.c serial: Remove redundant console_initcall from s3c and s5p console drivers 2011-07-20 19:10:43 +09:00
s5pv210.c Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 2011-07-25 23:09:27 -07:00
sa1100.c tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
samsung.c Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2011-10-26 15:11:09 +02:00
samsung.h serial: samsung: Add unified interrupt handler for s3c64xx and later SoC's 2011-08-23 10:48:31 -07:00
sb1250-duart.c TTY: serial, fix includes in some drivers 2011-09-22 15:49:26 -07:00
sc26xx.c
serial_core.c Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2011-10-26 15:11:09 +02:00
serial_cs.c pcmcia: Convert pcmcia_device_id declarations to const 2011-05-06 07:46:22 +02:00
serial_ks8695.c TTY: irq: Remove IRQF_DISABLED 2011-09-22 16:08:57 -07:00
serial_txx9.c TTY: serial, fix includes in some drivers 2011-09-22 15:49:26 -07:00
sh-sci.c Merge branches 'sh/pm-runtime' and 'common/clkfwk' into sh-fixes-for-linus 2011-11-11 16:16:25 +09:00
sh-sci.h serial: sh-sci: FIFO sizing helper consolidation. 2011-06-14 17:38:19 +09:00
sn_console.c TTY: irq: Remove IRQF_DISABLED 2011-09-22 16:08:57 -07:00
suncore.c
suncore.h
sunhv.c dt/serial: Eliminate users of of_platform_{,un}register_driver 2011-02-28 13:22:46 -07:00
sunsab.c dt/serial: Eliminate users of of_platform_{,un}register_driver 2011-02-28 13:22:46 -07:00
sunsab.h
sunsu.c treewide: Convert uses of struct resource to resource_size(ptr) 2011-06-10 14:55:36 +02:00
sunzilog.c Fix common misspellings 2011-03-31 11:26:23 -03:00
sunzilog.h
timbuart.c tty: Add module.h to drivers/tty users who just expect it there. 2011-10-31 19:31:27 -04:00
timbuart.h
uartlite.c Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6 2011-10-27 08:35:41 +02:00
ucc_uart.c Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2011-10-26 15:11:09 +02:00
vr41xx_siu.c
vt8500_serial.c treewide: Convert uses of struct resource to resource_size(ptr) 2011-06-10 14:55:36 +02:00
xilinx_uartps.c tty: Add module.h to drivers/tty users who just expect it there. 2011-10-31 19:31:27 -04:00
zs.c TTY: serial, fix includes in some drivers 2011-09-22 15:49:26 -07:00
zs.h