linux/drivers/block/ataflop.c
Tejun Heo 9934c8c045 block: implement and enforce request peek/start/fetch
Till now block layer allowed two separate modes of request execution.
A request is always acquired from the request queue via
elv_next_request().  After that, drivers are free to either dequeue it
or process it without dequeueing.  Dequeue allows elv_next_request()
to return the next request so that multiple requests can be in flight.

Executing requests without dequeueing has its merits mostly in
allowing drivers for simpler devices which can't do sg to deal with
segments only without considering request boundary.  However, the
benefit this brings is dubious and declining while the cost of the API
ambiguity is increasing.  Segment based drivers are usually for very
old or limited devices and as converting to dequeueing model isn't
difficult, it doesn't justify the API overhead it puts on block layer
and its more modern users.

Previous patches converted all block low level drivers to dequeueing
model.  This patch completes the API transition by...

* renaming elv_next_request() to blk_peek_request()

* renaming blkdev_dequeue_request() to blk_start_request()

* adding blk_fetch_request() which is combination of peek and start

* disallowing completion of queued (not started) requests

* applying new API to all LLDs

Renamings are for consistency and to break out of tree code so that
it's apparent that out of tree drivers need updating.

[ Impact: block request issue API cleanup, no functional change ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: unsik Kim <donari75@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Laurent Vivier <Laurent@lvivier.info>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:52:18 +02:00

2008 lines
51 KiB
C

/*
* drivers/block/ataflop.c
*
* Copyright (C) 1993 Greg Harp
* Atari Support by Bjoern Brauel, Roman Hodek
*
* Big cleanup Sep 11..14 1994 Roman Hodek:
* - Driver now works interrupt driven
* - Support for two drives; should work, but I cannot test that :-(
* - Reading is done in whole tracks and buffered to speed up things
* - Disk change detection and drive deselecting after motor-off
* similar to TOS
* - Autodetection of disk format (DD/HD); untested yet, because I
* don't have an HD drive :-(
*
* Fixes Nov 13 1994 Martin Schaller:
* - Autodetection works now
* - Support for 5 1/4'' disks
* - Removed drive type (unknown on atari)
* - Do seeks with 8 Mhz
*
* Changes by Andreas Schwab:
* - After errors in multiple read mode try again reading single sectors
* (Feb 1995):
* - Clean up error handling
* - Set blk_size for proper size checking
* - Initialize track register when testing presence of floppy
* - Implement some ioctl's
*
* Changes by Torsten Lang:
* - When probing the floppies we should add the FDCCMDADD_H flag since
* the FDC will otherwise wait forever when no disk is inserted...
*
* ++ Freddi Aschwanden (fa) 20.9.95 fixes for medusa:
* - MFPDELAY() after each FDC access -> atari
* - more/other disk formats
* - DMA to the block buffer directly if we have a 32bit DMA
* - for medusa, the step rate is always 3ms
* - on medusa, use only cache_push()
* Roman:
* - Make disk format numbering independent from minors
* - Let user set max. supported drive type (speeds up format
* detection, saves buffer space)
*
* Roman 10/15/95:
* - implement some more ioctls
* - disk formatting
*
* Andreas 95/12/12:
* - increase gap size at start of track for HD/ED disks
*
* Michael (MSch) 11/07/96:
* - implemented FDSETPRM and FDDEFPRM ioctl
*
* Andreas (97/03/19):
* - implemented missing BLK* ioctls
*
* Things left to do:
* - Formatting
* - Maybe a better strategy for disk change detection (does anyone
* know one?)
*/
#include <linux/module.h>
#include <linux/fd.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <asm/atafd.h>
#include <asm/atafdreg.h>
#include <asm/atariints.h>
#include <asm/atari_stdma.h>
#include <asm/atari_stram.h>
#define FD_MAX_UNITS 2
#undef DEBUG
static struct request_queue *floppy_queue;
static struct request *fd_request;
/* Disk types: DD, HD, ED */
static struct atari_disk_type {
const char *name;
unsigned spt; /* sectors per track */
unsigned blocks; /* total number of blocks */
unsigned fdc_speed; /* fdc_speed setting */
unsigned stretch; /* track doubling ? */
} atari_disk_type[] = {
{ "d360", 9, 720, 0, 0}, /* 0: 360kB diskette */
{ "D360", 9, 720, 0, 1}, /* 1: 360kb in 720k or 1.2MB drive */
{ "D720", 9,1440, 0, 0}, /* 2: 720kb in 720k or 1.2MB drive */
{ "D820", 10,1640, 0, 0}, /* 3: DD disk with 82 tracks/10 sectors */
/* formats above are probed for type DD */
#define MAX_TYPE_DD 3
{ "h1200",15,2400, 3, 0}, /* 4: 1.2MB diskette */
{ "H1440",18,2880, 3, 0}, /* 5: 1.4 MB diskette (HD) */
{ "H1640",20,3280, 3, 0}, /* 6: 1.64MB diskette (fat HD) 82 tr 20 sec */
/* formats above are probed for types DD and HD */
#define MAX_TYPE_HD 6
{ "E2880",36,5760, 3, 0}, /* 7: 2.8 MB diskette (ED) */
{ "E3280",40,6560, 3, 0}, /* 8: 3.2 MB diskette (fat ED) 82 tr 40 sec */
/* formats above are probed for types DD, HD and ED */
#define MAX_TYPE_ED 8
/* types below are never autoprobed */
{ "H1680",21,3360, 3, 0}, /* 9: 1.68MB diskette (fat HD) 80 tr 21 sec */
{ "h410",10,820, 0, 1}, /* 10: 410k diskette 41 tr 10 sec, stretch */
{ "h1476",18,2952, 3, 0}, /* 11: 1.48MB diskette 82 tr 18 sec */
{ "H1722",21,3444, 3, 0}, /* 12: 1.72MB diskette 82 tr 21 sec */
{ "h420",10,840, 0, 1}, /* 13: 420k diskette 42 tr 10 sec, stretch */
{ "H830",10,1660, 0, 0}, /* 14: 820k diskette 83 tr 10 sec */
{ "h1494",18,2952, 3, 0}, /* 15: 1.49MB diskette 83 tr 18 sec */
{ "H1743",21,3486, 3, 0}, /* 16: 1.74MB diskette 83 tr 21 sec */
{ "h880",11,1760, 0, 0}, /* 17: 880k diskette 80 tr 11 sec */
{ "D1040",13,2080, 0, 0}, /* 18: 1.04MB diskette 80 tr 13 sec */
{ "D1120",14,2240, 0, 0}, /* 19: 1.12MB diskette 80 tr 14 sec */
{ "h1600",20,3200, 3, 0}, /* 20: 1.60MB diskette 80 tr 20 sec */
{ "H1760",22,3520, 3, 0}, /* 21: 1.76MB diskette 80 tr 22 sec */
{ "H1920",24,3840, 3, 0}, /* 22: 1.92MB diskette 80 tr 24 sec */
{ "E3200",40,6400, 3, 0}, /* 23: 3.2MB diskette 80 tr 40 sec */
{ "E3520",44,7040, 3, 0}, /* 24: 3.52MB diskette 80 tr 44 sec */
{ "E3840",48,7680, 3, 0}, /* 25: 3.84MB diskette 80 tr 48 sec */
{ "H1840",23,3680, 3, 0}, /* 26: 1.84MB diskette 80 tr 23 sec */
{ "D800",10,1600, 0, 0}, /* 27: 800k diskette 80 tr 10 sec */
};
static int StartDiskType[] = {
MAX_TYPE_DD,
MAX_TYPE_HD,
MAX_TYPE_ED
};
#define TYPE_DD 0
#define TYPE_HD 1
#define TYPE_ED 2
static int DriveType = TYPE_HD;
static DEFINE_SPINLOCK(ataflop_lock);
/* Array for translating minors into disk formats */
static struct {
int index;
unsigned drive_types;
} minor2disktype[] = {
{ 0, TYPE_DD }, /* 1: d360 */
{ 4, TYPE_HD }, /* 2: h1200 */
{ 1, TYPE_DD }, /* 3: D360 */
{ 2, TYPE_DD }, /* 4: D720 */
{ 1, TYPE_DD }, /* 5: h360 = D360 */
{ 2, TYPE_DD }, /* 6: h720 = D720 */
{ 5, TYPE_HD }, /* 7: H1440 */
{ 7, TYPE_ED }, /* 8: E2880 */
/* some PC formats :-) */
{ 8, TYPE_ED }, /* 9: E3280 <- was "CompaQ" == E2880 for PC */
{ 5, TYPE_HD }, /* 10: h1440 = H1440 */
{ 9, TYPE_HD }, /* 11: H1680 */
{ 10, TYPE_DD }, /* 12: h410 */
{ 3, TYPE_DD }, /* 13: H820 <- == D820, 82x10 */
{ 11, TYPE_HD }, /* 14: h1476 */
{ 12, TYPE_HD }, /* 15: H1722 */
{ 13, TYPE_DD }, /* 16: h420 */
{ 14, TYPE_DD }, /* 17: H830 */
{ 15, TYPE_HD }, /* 18: h1494 */
{ 16, TYPE_HD }, /* 19: H1743 */
{ 17, TYPE_DD }, /* 20: h880 */
{ 18, TYPE_DD }, /* 21: D1040 */
{ 19, TYPE_DD }, /* 22: D1120 */
{ 20, TYPE_HD }, /* 23: h1600 */
{ 21, TYPE_HD }, /* 24: H1760 */
{ 22, TYPE_HD }, /* 25: H1920 */
{ 23, TYPE_ED }, /* 26: E3200 */
{ 24, TYPE_ED }, /* 27: E3520 */
{ 25, TYPE_ED }, /* 28: E3840 */
{ 26, TYPE_HD }, /* 29: H1840 */
{ 27, TYPE_DD }, /* 30: D800 */
{ 6, TYPE_HD }, /* 31: H1640 <- was H1600 == h1600 for PC */
};
#define NUM_DISK_MINORS ARRAY_SIZE(minor2disktype)
/*
* Maximum disk size (in kilobytes). This default is used whenever the
* current disk size is unknown.
*/
#define MAX_DISK_SIZE 3280
/*
* MSch: User-provided type information. 'drive' points to
* the respective entry of this array. Set by FDSETPRM ioctls.
*/
static struct atari_disk_type user_params[FD_MAX_UNITS];
/*
* User-provided permanent type information. 'drive' points to
* the respective entry of this array. Set by FDDEFPRM ioctls,
* restored upon disk change by floppy_revalidate() if valid (as seen by
* default_params[].blocks > 0 - a bit in unit[].flags might be used for this?)
*/
static struct atari_disk_type default_params[FD_MAX_UNITS];
/* current info on each unit */
static struct atari_floppy_struct {
int connected; /* !=0 : drive is connected */
int autoprobe; /* !=0 : do autoprobe */
struct atari_disk_type *disktype; /* current type of disk */
int track; /* current head position or -1 if
unknown */
unsigned int steprate; /* steprate setting */
unsigned int wpstat; /* current state of WP signal (for
disk change detection) */
int flags; /* flags */
struct gendisk *disk;
int ref;
int type;
} unit[FD_MAX_UNITS];
#define UD unit[drive]
#define UDT unit[drive].disktype
#define SUD unit[SelectedDrive]
#define SUDT unit[SelectedDrive].disktype
#define FDC_READ(reg) ({ \
/* unsigned long __flags; */ \
unsigned short __val; \
/* local_irq_save(__flags); */ \
dma_wd.dma_mode_status = 0x80 | (reg); \
udelay(25); \
__val = dma_wd.fdc_acces_seccount; \
MFPDELAY(); \
/* local_irq_restore(__flags); */ \
__val & 0xff; \
})
#define FDC_WRITE(reg,val) \
do { \
/* unsigned long __flags; */ \
/* local_irq_save(__flags); */ \
dma_wd.dma_mode_status = 0x80 | (reg); \
udelay(25); \
dma_wd.fdc_acces_seccount = (val); \
MFPDELAY(); \
/* local_irq_restore(__flags); */ \
} while(0)
/* Buffering variables:
* First, there is a DMA buffer in ST-RAM that is used for floppy DMA
* operations. Second, a track buffer is used to cache a whole track
* of the disk to save read operations. These are two separate buffers
* because that allows write operations without clearing the track buffer.
*/
static int MaxSectors[] = {
11, 22, 44
};
static int BufferSize[] = {
15*512, 30*512, 60*512
};
#define BUFFER_SIZE (BufferSize[DriveType])
unsigned char *DMABuffer; /* buffer for writes */
static unsigned long PhysDMABuffer; /* physical address */
static int UseTrackbuffer = -1; /* Do track buffering? */
module_param(UseTrackbuffer, int, 0);
unsigned char *TrackBuffer; /* buffer for reads */
static unsigned long PhysTrackBuffer; /* physical address */
static int BufferDrive, BufferSide, BufferTrack;
static int read_track; /* non-zero if we are reading whole tracks */
#define SECTOR_BUFFER(sec) (TrackBuffer + ((sec)-1)*512)
#define IS_BUFFERED(drive,side,track) \
(BufferDrive == (drive) && BufferSide == (side) && BufferTrack == (track))
/*
* These are global variables, as that's the easiest way to give
* information to interrupts. They are the data used for the current
* request.
*/
static int SelectedDrive = 0;
static int ReqCmd, ReqBlock;
static int ReqSide, ReqTrack, ReqSector, ReqCnt;
static int HeadSettleFlag = 0;
static unsigned char *ReqData, *ReqBuffer;
static int MotorOn = 0, MotorOffTrys;
static int IsFormatting = 0, FormatError;
static int UserSteprate[FD_MAX_UNITS] = { -1, -1 };
module_param_array(UserSteprate, int, NULL, 0);
/* Synchronization of FDC access. */
static volatile int fdc_busy = 0;
static DECLARE_WAIT_QUEUE_HEAD(fdc_wait);
static DECLARE_WAIT_QUEUE_HEAD(format_wait);
static unsigned long changed_floppies = 0xff, fake_change = 0;
#define CHECK_CHANGE_DELAY HZ/2
#define FD_MOTOR_OFF_DELAY (3*HZ)
#define FD_MOTOR_OFF_MAXTRY (10*20)
#define FLOPPY_TIMEOUT (6*HZ)
#define RECALIBRATE_ERRORS 4 /* After this many errors the drive
* will be recalibrated. */
#define MAX_ERRORS 8 /* After this many errors the driver
* will give up. */
/*
* The driver is trying to determine the correct media format
* while Probing is set. fd_rwsec_done() clears it after a
* successful access.
*/
static int Probing = 0;
/* This flag is set when a dummy seek is necessary to make the WP
* status bit accessible.
*/
static int NeedSeek = 0;
#ifdef DEBUG
#define DPRINT(a) printk a
#else
#define DPRINT(a)
#endif
/***************************** Prototypes *****************************/
static void fd_select_side( int side );
static void fd_select_drive( int drive );
static void fd_deselect( void );
static void fd_motor_off_timer( unsigned long dummy );
static void check_change( unsigned long dummy );
static irqreturn_t floppy_irq (int irq, void *dummy);
static void fd_error( void );
static int do_format(int drive, int type, struct atari_format_descr *desc);
static void do_fd_action( int drive );
static void fd_calibrate( void );
static void fd_calibrate_done( int status );
static void fd_seek( void );
static void fd_seek_done( int status );
static void fd_rwsec( void );
static void fd_readtrack_check( unsigned long dummy );
static void fd_rwsec_done( int status );
static void fd_rwsec_done1(int status);
static void fd_writetrack( void );
static void fd_writetrack_done( int status );
static void fd_times_out( unsigned long dummy );
static void finish_fdc( void );
static void finish_fdc_done( int dummy );
static void setup_req_params( int drive );
static void redo_fd_request( void);
static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int
cmd, unsigned long param);
static void fd_probe( int drive );
static int fd_test_drive_present( int drive );
static void config_types( void );
static int floppy_open(struct block_device *bdev, fmode_t mode);
static int floppy_release(struct gendisk *disk, fmode_t mode);
/************************* End of Prototypes **************************/
static DEFINE_TIMER(motor_off_timer, fd_motor_off_timer, 0, 0);
static DEFINE_TIMER(readtrack_timer, fd_readtrack_check, 0, 0);
static DEFINE_TIMER(timeout_timer, fd_times_out, 0, 0);
static DEFINE_TIMER(fd_timer, check_change, 0, 0);
static void fd_end_request_cur(int err)
{
if (!__blk_end_request_cur(fd_request, err))
fd_request = NULL;
}
static inline void start_motor_off_timer(void)
{
mod_timer(&motor_off_timer, jiffies + FD_MOTOR_OFF_DELAY);
MotorOffTrys = 0;
}
static inline void start_check_change_timer( void )
{
mod_timer(&fd_timer, jiffies + CHECK_CHANGE_DELAY);
}
static inline void start_timeout(void)
{
mod_timer(&timeout_timer, jiffies + FLOPPY_TIMEOUT);
}
static inline void stop_timeout(void)
{
del_timer(&timeout_timer);
}
/* Select the side to use. */
static void fd_select_side( int side )
{
unsigned long flags;
/* protect against various other ints mucking around with the PSG */
local_irq_save(flags);
sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
sound_ym.wd_data = (side == 0) ? sound_ym.rd_data_reg_sel | 0x01 :
sound_ym.rd_data_reg_sel & 0xfe;
local_irq_restore(flags);
}
/* Select a drive, update the FDC's track register and set the correct
* clock speed for this disk's type.
*/
static void fd_select_drive( int drive )
{
unsigned long flags;
unsigned char tmp;
if (drive == SelectedDrive)
return;
/* protect against various other ints mucking around with the PSG */
local_irq_save(flags);
sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
tmp = sound_ym.rd_data_reg_sel;
sound_ym.wd_data = (tmp | DSKDRVNONE) & ~(drive == 0 ? DSKDRV0 : DSKDRV1);
atari_dont_touch_floppy_select = 1;
local_irq_restore(flags);
/* restore track register to saved value */
FDC_WRITE( FDCREG_TRACK, UD.track );
udelay(25);
/* select 8/16 MHz */
if (UDT)
if (ATARIHW_PRESENT(FDCSPEED))
dma_wd.fdc_speed = UDT->fdc_speed;
SelectedDrive = drive;
}
/* Deselect both drives. */
static void fd_deselect( void )
{
unsigned long flags;
/* protect against various other ints mucking around with the PSG */
local_irq_save(flags);
atari_dont_touch_floppy_select = 0;
sound_ym.rd_data_reg_sel=14; /* Select PSG Port A */
sound_ym.wd_data = (sound_ym.rd_data_reg_sel |
(MACH_IS_FALCON ? 3 : 7)); /* no drives selected */
/* On Falcon, the drive B select line is used on the printer port, so
* leave it alone... */
SelectedDrive = -1;
local_irq_restore(flags);
}
/* This timer function deselects the drives when the FDC switched the
* motor off. The deselection cannot happen earlier because the FDC
* counts the index signals, which arrive only if one drive is selected.
*/
static void fd_motor_off_timer( unsigned long dummy )
{
unsigned char status;
if (SelectedDrive < 0)
/* no drive selected, needn't deselect anyone */
return;
if (stdma_islocked())
goto retry;
status = FDC_READ( FDCREG_STATUS );
if (!(status & 0x80)) {
/* motor already turned off by FDC -> deselect drives */
MotorOn = 0;
fd_deselect();
return;
}
/* not yet off, try again */
retry:
/* Test again later; if tested too often, it seems there is no disk
* in the drive and the FDC will leave the motor on forever (or,
* at least until a disk is inserted). So we'll test only twice
* per second from then on...
*/
mod_timer(&motor_off_timer,
jiffies + (MotorOffTrys++ < FD_MOTOR_OFF_MAXTRY ? HZ/20 : HZ/2));
}
/* This function is repeatedly called to detect disk changes (as good
* as possible) and keep track of the current state of the write protection.
*/
static void check_change( unsigned long dummy )
{
static int drive = 0;
unsigned long flags;
unsigned char old_porta;
int stat;
if (++drive > 1 || !UD.connected)
drive = 0;
/* protect against various other ints mucking around with the PSG */
local_irq_save(flags);
if (!stdma_islocked()) {
sound_ym.rd_data_reg_sel = 14;
old_porta = sound_ym.rd_data_reg_sel;
sound_ym.wd_data = (old_porta | DSKDRVNONE) &
~(drive == 0 ? DSKDRV0 : DSKDRV1);
stat = !!(FDC_READ( FDCREG_STATUS ) & FDCSTAT_WPROT);
sound_ym.wd_data = old_porta;
if (stat != UD.wpstat) {
DPRINT(( "wpstat[%d] = %d\n", drive, stat ));
UD.wpstat = stat;
set_bit (drive, &changed_floppies);
}
}
local_irq_restore(flags);
start_check_change_timer();
}
/* Handling of the Head Settling Flag: This flag should be set after each
* seek operation, because we don't use seeks with verify.
*/
static inline void set_head_settle_flag(void)
{
HeadSettleFlag = FDCCMDADD_E;
}
static inline int get_head_settle_flag(void)
{
int tmp = HeadSettleFlag;
HeadSettleFlag = 0;
return( tmp );
}
static inline void copy_buffer(void *from, void *to)
{
ulong *p1 = (ulong *)from, *p2 = (ulong *)to;
int cnt;
for (cnt = 512/4; cnt; cnt--)
*p2++ = *p1++;
}
/* General Interrupt Handling */
static void (*FloppyIRQHandler)( int status ) = NULL;
static irqreturn_t floppy_irq (int irq, void *dummy)
{
unsigned char status;
void (*handler)( int );
handler = xchg(&FloppyIRQHandler, NULL);
if (handler) {
nop();
status = FDC_READ( FDCREG_STATUS );
DPRINT(("FDC irq, status = %02x handler = %08lx\n",status,(unsigned long)handler));
handler( status );
}
else {
DPRINT(("FDC irq, no handler\n"));
}
return IRQ_HANDLED;
}
/* Error handling: If some error happened, retry some times, then
* recalibrate, then try again, and fail after MAX_ERRORS.
*/
static void fd_error( void )
{
if (IsFormatting) {
IsFormatting = 0;
FormatError = 1;
wake_up( &format_wait );
return;
}
if (!fd_request)
return;
fd_request->errors++;
if (fd_request->errors >= MAX_ERRORS) {
printk(KERN_ERR "fd%d: too many errors.\n", SelectedDrive );
fd_end_request_cur(-EIO);
}
else if (fd_request->errors == RECALIBRATE_ERRORS) {
printk(KERN_WARNING "fd%d: recalibrating\n", SelectedDrive );
if (SelectedDrive != -1)
SUD.track = -1;
}
redo_fd_request();
}
#define SET_IRQ_HANDLER(proc) do { FloppyIRQHandler = (proc); } while(0)
/* ---------- Formatting ---------- */
#define FILL(n,val) \
do { \
memset( p, val, n ); \
p += n; \
} while(0)
static int do_format(int drive, int type, struct atari_format_descr *desc)
{
unsigned char *p;
int sect, nsect;
unsigned long flags;
DPRINT(("do_format( dr=%d tr=%d he=%d offs=%d )\n",
drive, desc->track, desc->head, desc->sect_offset ));
local_irq_save(flags);
while( fdc_busy ) sleep_on( &fdc_wait );
fdc_busy = 1;
stdma_lock(floppy_irq, NULL);
atari_turnon_irq( IRQ_MFP_FDC ); /* should be already, just to be sure */
local_irq_restore(flags);
if (type) {
if (--type >= NUM_DISK_MINORS ||
minor2disktype[type].drive_types > DriveType) {
redo_fd_request();
return -EINVAL;
}
type = minor2disktype[type].index;
UDT = &atari_disk_type[type];
}
if (!UDT || desc->track >= UDT->blocks/UDT->spt/2 || desc->head >= 2) {
redo_fd_request();
return -EINVAL;
}
nsect = UDT->spt;
p = TrackBuffer;
/* The track buffer is used for the raw track data, so its
contents become invalid! */
BufferDrive = -1;
/* stop deselect timer */
del_timer( &motor_off_timer );
FILL( 60 * (nsect / 9), 0x4e );
for( sect = 0; sect < nsect; ++sect ) {
FILL( 12, 0 );
FILL( 3, 0xf5 );
*p++ = 0xfe;
*p++ = desc->track;
*p++ = desc->head;
*p++ = (nsect + sect - desc->sect_offset) % nsect + 1;
*p++ = 2;
*p++ = 0xf7;
FILL( 22, 0x4e );
FILL( 12, 0 );
FILL( 3, 0xf5 );
*p++ = 0xfb;
FILL( 512, 0xe5 );
*p++ = 0xf7;
FILL( 40, 0x4e );
}
FILL( TrackBuffer+BUFFER_SIZE-p, 0x4e );
IsFormatting = 1;
FormatError = 0;
ReqTrack = desc->track;
ReqSide = desc->head;
do_fd_action( drive );
sleep_on( &format_wait );
redo_fd_request();
return( FormatError ? -EIO : 0 );
}
/* do_fd_action() is the general procedure for a fd request: All
* required parameter settings (drive select, side select, track
* position) are checked and set if needed. For each of these
* parameters and the actual reading or writing exist two functions:
* one that starts the setting (or skips it if possible) and one
* callback for the "done" interrupt. Each done func calls the next
* set function to propagate the request down to fd_rwsec_done().
*/
static void do_fd_action( int drive )
{
DPRINT(("do_fd_action\n"));
if (UseTrackbuffer && !IsFormatting) {
repeat:
if (IS_BUFFERED( drive, ReqSide, ReqTrack )) {
if (ReqCmd == READ) {
copy_buffer( SECTOR_BUFFER(ReqSector), ReqData );
if (++ReqCnt < blk_rq_cur_sectors(fd_request)) {
/* read next sector */
setup_req_params( drive );
goto repeat;
}
else {
/* all sectors finished */
fd_end_request_cur(0);
redo_fd_request();
return;
}
}
else {
/* cmd == WRITE, pay attention to track buffer
* consistency! */
copy_buffer( ReqData, SECTOR_BUFFER(ReqSector) );
}
}
}
if (SelectedDrive != drive)
fd_select_drive( drive );
if (UD.track == -1)
fd_calibrate();
else if (UD.track != ReqTrack << UDT->stretch)
fd_seek();
else if (IsFormatting)
fd_writetrack();
else
fd_rwsec();
}
/* Seek to track 0 if the current track is unknown */
static void fd_calibrate( void )
{
if (SUD.track >= 0) {
fd_calibrate_done( 0 );
return;
}
if (ATARIHW_PRESENT(FDCSPEED))
dma_wd.fdc_speed = 0; /* always seek with 8 Mhz */;
DPRINT(("fd_calibrate\n"));
SET_IRQ_HANDLER( fd_calibrate_done );
/* we can't verify, since the speed may be incorrect */
FDC_WRITE( FDCREG_CMD, FDCCMD_RESTORE | SUD.steprate );
NeedSeek = 1;
MotorOn = 1;
start_timeout();
/* wait for IRQ */
}
static void fd_calibrate_done( int status )
{
DPRINT(("fd_calibrate_done()\n"));
stop_timeout();
/* set the correct speed now */
if (ATARIHW_PRESENT(FDCSPEED))
dma_wd.fdc_speed = SUDT->fdc_speed;
if (status & FDCSTAT_RECNF) {
printk(KERN_ERR "fd%d: restore failed\n", SelectedDrive );
fd_error();
}
else {
SUD.track = 0;
fd_seek();
}
}
/* Seek the drive to the requested track. The drive must have been
* calibrated at some point before this.
*/
static void fd_seek( void )
{
if (SUD.track == ReqTrack << SUDT->stretch) {
fd_seek_done( 0 );
return;
}
if (ATARIHW_PRESENT(FDCSPEED)) {
dma_wd.fdc_speed = 0; /* always seek witch 8 Mhz */
MFPDELAY();
}
DPRINT(("fd_seek() to track %d\n",ReqTrack));
FDC_WRITE( FDCREG_DATA, ReqTrack << SUDT->stretch);
udelay(25);
SET_IRQ_HANDLER( fd_seek_done );
FDC_WRITE( FDCREG_CMD, FDCCMD_SEEK | SUD.steprate );
MotorOn = 1;
set_head_settle_flag();
start_timeout();
/* wait for IRQ */
}
static void fd_seek_done( int status )
{
DPRINT(("fd_seek_done()\n"));
stop_timeout();
/* set the correct speed */
if (ATARIHW_PRESENT(FDCSPEED))
dma_wd.fdc_speed = SUDT->fdc_speed;
if (status & FDCSTAT_RECNF) {
printk(KERN_ERR "fd%d: seek error (to track %d)\n",
SelectedDrive, ReqTrack );
/* we don't know exactly which track we are on now! */
SUD.track = -1;
fd_error();
}
else {
SUD.track = ReqTrack << SUDT->stretch;
NeedSeek = 0;
if (IsFormatting)
fd_writetrack();
else
fd_rwsec();
}
}
/* This does the actual reading/writing after positioning the head
* over the correct track.
*/
static int MultReadInProgress = 0;
static void fd_rwsec( void )
{
unsigned long paddr, flags;
unsigned int rwflag, old_motoron;
unsigned int track;
DPRINT(("fd_rwsec(), Sec=%d, Access=%c\n",ReqSector, ReqCmd == WRITE ? 'w' : 'r' ));
if (ReqCmd == WRITE) {
if (ATARIHW_PRESENT(EXTD_DMA)) {
paddr = virt_to_phys(ReqData);
}
else {
copy_buffer( ReqData, DMABuffer );
paddr = PhysDMABuffer;
}
dma_cache_maintenance( paddr, 512, 1 );
rwflag = 0x100;
}
else {
if (read_track)
paddr = PhysTrackBuffer;
else
paddr = ATARIHW_PRESENT(EXTD_DMA) ?
virt_to_phys(ReqData) : PhysDMABuffer;
rwflag = 0;
}
fd_select_side( ReqSide );
/* Start sector of this operation */
FDC_WRITE( FDCREG_SECTOR, read_track ? 1 : ReqSector );
MFPDELAY();
/* Cheat for track if stretch != 0 */
if (SUDT->stretch) {
track = FDC_READ( FDCREG_TRACK);
MFPDELAY();
FDC_WRITE( FDCREG_TRACK, track >> SUDT->stretch);
}
udelay(25);
/* Setup DMA */
local_irq_save(flags);
dma_wd.dma_lo = (unsigned char)paddr;
MFPDELAY();
paddr >>= 8;
dma_wd.dma_md = (unsigned char)paddr;
MFPDELAY();
paddr >>= 8;
if (ATARIHW_PRESENT(EXTD_DMA))
st_dma_ext_dmahi = (unsigned short)paddr;
else
dma_wd.dma_hi = (unsigned char)paddr;
MFPDELAY();
local_irq_restore(flags);
/* Clear FIFO and switch DMA to correct mode */
dma_wd.dma_mode_status = 0x90 | rwflag;
MFPDELAY();
dma_wd.dma_mode_status = 0x90 | (rwflag ^ 0x100);
MFPDELAY();
dma_wd.dma_mode_status = 0x90 | rwflag;
MFPDELAY();
/* How many sectors for DMA */
dma_wd.fdc_acces_seccount = read_track ? SUDT->spt : 1;
udelay(25);
/* Start operation */
dma_wd.dma_mode_status = FDCSELREG_STP | rwflag;
udelay(25);
SET_IRQ_HANDLER( fd_rwsec_done );
dma_wd.fdc_acces_seccount =
(get_head_settle_flag() |
(rwflag ? FDCCMD_WRSEC : (FDCCMD_RDSEC | (read_track ? FDCCMDADD_M : 0))));
old_motoron = MotorOn;
MotorOn = 1;
NeedSeek = 1;
/* wait for interrupt */
if (read_track) {
/* If reading a whole track, wait about one disk rotation and
* then check if all sectors are read. The FDC will even
* search for the first non-existent sector and need 1 sec to
* recognise that it isn't present :-(
*/
MultReadInProgress = 1;
mod_timer(&readtrack_timer,
/* 1 rot. + 5 rot.s if motor was off */
jiffies + HZ/5 + (old_motoron ? 0 : HZ));
}
start_timeout();
}
static void fd_readtrack_check( unsigned long dummy )
{
unsigned long flags, addr, addr2;
local_irq_save(flags);
if (!MultReadInProgress) {
/* This prevents a race condition that could arise if the
* interrupt is triggered while the calling of this timer
* callback function takes place. The IRQ function then has
* already cleared 'MultReadInProgress' when flow of control
* gets here.
*/
local_irq_restore(flags);
return;
}
/* get the current DMA address */
/* ++ f.a. read twice to avoid being fooled by switcher */
addr = 0;
do {
addr2 = addr;
addr = dma_wd.dma_lo & 0xff;
MFPDELAY();
addr |= (dma_wd.dma_md & 0xff) << 8;
MFPDELAY();
if (ATARIHW_PRESENT( EXTD_DMA ))
addr |= (st_dma_ext_dmahi & 0xffff) << 16;
else
addr |= (dma_wd.dma_hi & 0xff) << 16;
MFPDELAY();
} while(addr != addr2);
if (addr >= PhysTrackBuffer + SUDT->spt*512) {
/* already read enough data, force an FDC interrupt to stop
* the read operation
*/
SET_IRQ_HANDLER( NULL );
MultReadInProgress = 0;
local_irq_restore(flags);
DPRINT(("fd_readtrack_check(): done\n"));
FDC_WRITE( FDCREG_CMD, FDCCMD_FORCI );
udelay(25);
/* No error until now -- the FDC would have interrupted
* otherwise!
*/
fd_rwsec_done1(0);
}
else {
/* not yet finished, wait another tenth rotation */
local_irq_restore(flags);
DPRINT(("fd_readtrack_check(): not yet finished\n"));
mod_timer(&readtrack_timer, jiffies + HZ/5/10);
}
}
static void fd_rwsec_done( int status )
{
DPRINT(("fd_rwsec_done()\n"));
if (read_track) {
del_timer(&readtrack_timer);
if (!MultReadInProgress)
return;
MultReadInProgress = 0;
}
fd_rwsec_done1(status);
}
static void fd_rwsec_done1(int status)
{
unsigned int track;
stop_timeout();
/* Correct the track if stretch != 0 */
if (SUDT->stretch) {
track = FDC_READ( FDCREG_TRACK);
MFPDELAY();
FDC_WRITE( FDCREG_TRACK, track << SUDT->stretch);
}
if (!UseTrackbuffer) {
dma_wd.dma_mode_status = 0x90;
MFPDELAY();
if (!(dma_wd.dma_mode_status & 0x01)) {
printk(KERN_ERR "fd%d: DMA error\n", SelectedDrive );
goto err_end;
}
}
MFPDELAY();
if (ReqCmd == WRITE && (status & FDCSTAT_WPROT)) {
printk(KERN_NOTICE "fd%d: is write protected\n", SelectedDrive );
goto err_end;
}
if ((status & FDCSTAT_RECNF) &&
/* RECNF is no error after a multiple read when the FDC
searched for a non-existent sector! */
!(read_track && FDC_READ(FDCREG_SECTOR) > SUDT->spt)) {
if (Probing) {
if (SUDT > atari_disk_type) {
if (SUDT[-1].blocks > ReqBlock) {
/* try another disk type */
SUDT--;
set_capacity(unit[SelectedDrive].disk,
SUDT->blocks);
} else
Probing = 0;
}
else {
if (SUD.flags & FTD_MSG)
printk(KERN_INFO "fd%d: Auto-detected floppy type %s\n",
SelectedDrive, SUDT->name );
Probing=0;
}
} else {
/* record not found, but not probing. Maybe stretch wrong ? Restart probing */
if (SUD.autoprobe) {
SUDT = atari_disk_type + StartDiskType[DriveType];
set_capacity(unit[SelectedDrive].disk,
SUDT->blocks);
Probing = 1;
}
}
if (Probing) {
if (ATARIHW_PRESENT(FDCSPEED)) {
dma_wd.fdc_speed = SUDT->fdc_speed;
MFPDELAY();
}
setup_req_params( SelectedDrive );
BufferDrive = -1;
do_fd_action( SelectedDrive );
return;
}
printk(KERN_ERR "fd%d: sector %d not found (side %d, track %d)\n",
SelectedDrive, FDC_READ (FDCREG_SECTOR), ReqSide, ReqTrack );
goto err_end;
}
if (status & FDCSTAT_CRC) {
printk(KERN_ERR "fd%d: CRC error (side %d, track %d, sector %d)\n",
SelectedDrive, ReqSide, ReqTrack, FDC_READ (FDCREG_SECTOR) );
goto err_end;
}
if (status & FDCSTAT_LOST) {
printk(KERN_ERR "fd%d: lost data (side %d, track %d, sector %d)\n",
SelectedDrive, ReqSide, ReqTrack, FDC_READ (FDCREG_SECTOR) );
goto err_end;
}
Probing = 0;
if (ReqCmd == READ) {
if (!read_track) {
void *addr;
addr = ATARIHW_PRESENT( EXTD_DMA ) ? ReqData : DMABuffer;
dma_cache_maintenance( virt_to_phys(addr), 512, 0 );
if (!ATARIHW_PRESENT( EXTD_DMA ))
copy_buffer (addr, ReqData);
} else {
dma_cache_maintenance( PhysTrackBuffer, MaxSectors[DriveType] * 512, 0 );
BufferDrive = SelectedDrive;
BufferSide = ReqSide;
BufferTrack = ReqTrack;
copy_buffer (SECTOR_BUFFER (ReqSector), ReqData);
}
}
if (++ReqCnt < blk_rq_cur_sectors(fd_request)) {
/* read next sector */
setup_req_params( SelectedDrive );
do_fd_action( SelectedDrive );
}
else {
/* all sectors finished */
fd_end_request_cur(0);
redo_fd_request();
}
return;
err_end:
BufferDrive = -1;
fd_error();
}
static void fd_writetrack( void )
{
unsigned long paddr, flags;
unsigned int track;
DPRINT(("fd_writetrack() Tr=%d Si=%d\n", ReqTrack, ReqSide ));
paddr = PhysTrackBuffer;
dma_cache_maintenance( paddr, BUFFER_SIZE, 1 );
fd_select_side( ReqSide );
/* Cheat for track if stretch != 0 */
if (SUDT->stretch) {
track = FDC_READ( FDCREG_TRACK);
MFPDELAY();
FDC_WRITE(FDCREG_TRACK,track >> SUDT->stretch);
}
udelay(40);
/* Setup DMA */
local_irq_save(flags);
dma_wd.dma_lo = (unsigned char)paddr;
MFPDELAY();
paddr >>= 8;
dma_wd.dma_md = (unsigned char)paddr;
MFPDELAY();
paddr >>= 8;
if (ATARIHW_PRESENT( EXTD_DMA ))
st_dma_ext_dmahi = (unsigned short)paddr;
else
dma_wd.dma_hi = (unsigned char)paddr;
MFPDELAY();
local_irq_restore(flags);
/* Clear FIFO and switch DMA to correct mode */
dma_wd.dma_mode_status = 0x190;
MFPDELAY();
dma_wd.dma_mode_status = 0x90;
MFPDELAY();
dma_wd.dma_mode_status = 0x190;
MFPDELAY();
/* How many sectors for DMA */
dma_wd.fdc_acces_seccount = BUFFER_SIZE/512;
udelay(40);
/* Start operation */
dma_wd.dma_mode_status = FDCSELREG_STP | 0x100;
udelay(40);
SET_IRQ_HANDLER( fd_writetrack_done );
dma_wd.fdc_acces_seccount = FDCCMD_WRTRA | get_head_settle_flag();
MotorOn = 1;
start_timeout();
/* wait for interrupt */
}
static void fd_writetrack_done( int status )
{
DPRINT(("fd_writetrack_done()\n"));
stop_timeout();
if (status & FDCSTAT_WPROT) {
printk(KERN_NOTICE "fd%d: is write protected\n", SelectedDrive );
goto err_end;
}
if (status & FDCSTAT_LOST) {
printk(KERN_ERR "fd%d: lost data (side %d, track %d)\n",
SelectedDrive, ReqSide, ReqTrack );
goto err_end;
}
wake_up( &format_wait );
return;
err_end:
fd_error();
}
static void fd_times_out( unsigned long dummy )
{
atari_disable_irq( IRQ_MFP_FDC );
if (!FloppyIRQHandler) goto end; /* int occurred after timer was fired, but
* before we came here... */
SET_IRQ_HANDLER( NULL );
/* If the timeout occurred while the readtrack_check timer was
* active, we need to cancel it, else bad things will happen */
if (UseTrackbuffer)
del_timer( &readtrack_timer );
FDC_WRITE( FDCREG_CMD, FDCCMD_FORCI );
udelay( 25 );
printk(KERN_ERR "floppy timeout\n" );
fd_error();
end:
atari_enable_irq( IRQ_MFP_FDC );
}
/* The (noop) seek operation here is needed to make the WP bit in the
* FDC status register accessible for check_change. If the last disk
* operation would have been a RDSEC, this bit would always read as 0
* no matter what :-( To save time, the seek goes to the track we're
* already on.
*/
static void finish_fdc( void )
{
if (!NeedSeek) {
finish_fdc_done( 0 );
}
else {
DPRINT(("finish_fdc: dummy seek started\n"));
FDC_WRITE (FDCREG_DATA, SUD.track);
SET_IRQ_HANDLER( finish_fdc_done );
FDC_WRITE (FDCREG_CMD, FDCCMD_SEEK);
MotorOn = 1;
start_timeout();
/* we must wait for the IRQ here, because the ST-DMA
is released immediately afterwards and the interrupt
may be delivered to the wrong driver. */
}
}
static void finish_fdc_done( int dummy )
{
unsigned long flags;
DPRINT(("finish_fdc_done entered\n"));
stop_timeout();
NeedSeek = 0;
if (timer_pending(&fd_timer) && time_before(fd_timer.expires, jiffies + 5))
/* If the check for a disk change is done too early after this
* last seek command, the WP bit still reads wrong :-((
*/
mod_timer(&fd_timer, jiffies + 5);
else
start_check_change_timer();
start_motor_off_timer();
local_irq_save(flags);
stdma_release();
fdc_busy = 0;
wake_up( &fdc_wait );
local_irq_restore(flags);
DPRINT(("finish_fdc() finished\n"));
}
/* The detection of disk changes is a dark chapter in Atari history :-(
* Because the "Drive ready" signal isn't present in the Atari
* hardware, one has to rely on the "Write Protect". This works fine,
* as long as no write protected disks are used. TOS solves this
* problem by introducing tri-state logic ("maybe changed") and
* looking at the serial number in block 0. This isn't possible for
* Linux, since the floppy driver can't make assumptions about the
* filesystem used on the disk and thus the contents of block 0. I've
* chosen the method to always say "The disk was changed" if it is
* unsure whether it was. This implies that every open or mount
* invalidates the disk buffers if you work with write protected
* disks. But at least this is better than working with incorrect data
* due to unrecognised disk changes.
*/
static int check_floppy_change(struct gendisk *disk)
{
struct atari_floppy_struct *p = disk->private_data;
unsigned int drive = p - unit;
if (test_bit (drive, &fake_change)) {
/* simulated change (e.g. after formatting) */
return 1;
}
if (test_bit (drive, &changed_floppies)) {
/* surely changed (the WP signal changed at least once) */
return 1;
}
if (UD.wpstat) {
/* WP is on -> could be changed: to be sure, buffers should be
* invalidated...
*/
return 1;
}
return 0;
}
static int floppy_revalidate(struct gendisk *disk)
{
struct atari_floppy_struct *p = disk->private_data;
unsigned int drive = p - unit;
if (test_bit(drive, &changed_floppies) ||
test_bit(drive, &fake_change) ||
p->disktype == 0) {
if (UD.flags & FTD_MSG)
printk(KERN_ERR "floppy: clear format %p!\n", UDT);
BufferDrive = -1;
clear_bit(drive, &fake_change);
clear_bit(drive, &changed_floppies);
/* MSch: clearing geometry makes sense only for autoprobe
formats, for 'permanent user-defined' parameter:
restore default_params[] here if flagged valid! */
if (default_params[drive].blocks == 0)
UDT = NULL;
else
UDT = &default_params[drive];
}
return 0;
}
/* This sets up the global variables describing the current request. */
static void setup_req_params( int drive )
{
int block = ReqBlock + ReqCnt;
ReqTrack = block / UDT->spt;
ReqSector = block - ReqTrack * UDT->spt + 1;
ReqSide = ReqTrack & 1;
ReqTrack >>= 1;
ReqData = ReqBuffer + 512 * ReqCnt;
if (UseTrackbuffer)
read_track = (ReqCmd == READ && fd_request->errors == 0);
else
read_track = 0;
DPRINT(("Request params: Si=%d Tr=%d Se=%d Data=%08lx\n",ReqSide,
ReqTrack, ReqSector, (unsigned long)ReqData ));
}
static void redo_fd_request(void)
{
int drive, type;
struct atari_floppy_struct *floppy;
DPRINT(("redo_fd_request: fd_request=%p dev=%s fd_request->sector=%ld\n",
fd_request, fd_request ? fd_request->rq_disk->disk_name : "",
fd_request ? blk_rq_pos(fd_request) : 0 ));
IsFormatting = 0;
repeat:
if (!fd_request) {
fd_request = blk_fetch_request(floppy_queue);
if (!fd_request)
goto the_end;
}
floppy = fd_request->rq_disk->private_data;
drive = floppy - unit;
type = floppy->type;
if (!UD.connected) {
/* drive not connected */
printk(KERN_ERR "Unknown Device: fd%d\n", drive );
fd_end_request_cur(-EIO);
goto repeat;
}
if (type == 0) {
if (!UDT) {
Probing = 1;
UDT = atari_disk_type + StartDiskType[DriveType];
set_capacity(floppy->disk, UDT->blocks);
UD.autoprobe = 1;
}
}
else {
/* user supplied disk type */
if (--type >= NUM_DISK_MINORS) {
printk(KERN_WARNING "fd%d: invalid disk format", drive );
fd_end_request_cur(-EIO);
goto repeat;
}
if (minor2disktype[type].drive_types > DriveType) {
printk(KERN_WARNING "fd%d: unsupported disk format", drive );
fd_end_request_cur(-EIO);
goto repeat;
}
type = minor2disktype[type].index;
UDT = &atari_disk_type[type];
set_capacity(floppy->disk, UDT->blocks);
UD.autoprobe = 0;
}
if (blk_rq_pos(fd_request) + 1 > UDT->blocks) {
fd_end_request_cur(-EIO);
goto repeat;
}
/* stop deselect timer */
del_timer( &motor_off_timer );
ReqCnt = 0;
ReqCmd = rq_data_dir(fd_request);
ReqBlock = blk_rq_pos(fd_request);
ReqBuffer = fd_request->buffer;
setup_req_params( drive );
do_fd_action( drive );
return;
the_end:
finish_fdc();
}
void do_fd_request(struct request_queue * q)
{
unsigned long flags;
DPRINT(("do_fd_request for pid %d\n",current->pid));
while( fdc_busy ) sleep_on( &fdc_wait );
fdc_busy = 1;
stdma_lock(floppy_irq, NULL);
atari_disable_irq( IRQ_MFP_FDC );
local_save_flags(flags); /* The request function is called with ints
local_irq_disable(); * disabled... so must save the IPL for later */
redo_fd_request();
local_irq_restore(flags);
atari_enable_irq( IRQ_MFP_FDC );
}
static int fd_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long param)
{
struct gendisk *disk = bdev->bd_disk;
struct atari_floppy_struct *floppy = disk->private_data;
int drive = floppy - unit;
int type = floppy->type;
struct atari_format_descr fmt_desc;
struct atari_disk_type *dtp;
struct floppy_struct getprm;
int settype;
struct floppy_struct setprm;
void __user *argp = (void __user *)param;
switch (cmd) {
case FDGETPRM:
if (type) {
if (--type >= NUM_DISK_MINORS)
return -ENODEV;
if (minor2disktype[type].drive_types > DriveType)
return -ENODEV;
type = minor2disktype[type].index;
dtp = &atari_disk_type[type];
if (UD.flags & FTD_MSG)
printk (KERN_ERR "floppy%d: found dtp %p name %s!\n",
drive, dtp, dtp->name);
}
else {
if (!UDT)
return -ENXIO;
else
dtp = UDT;
}
memset((void *)&getprm, 0, sizeof(getprm));
getprm.size = dtp->blocks;
getprm.sect = dtp->spt;
getprm.head = 2;
getprm.track = dtp->blocks/dtp->spt/2;
getprm.stretch = dtp->stretch;
if (copy_to_user(argp, &getprm, sizeof(getprm)))
return -EFAULT;
return 0;
}
switch (cmd) {
case FDSETPRM:
case FDDEFPRM:
/*
* MSch 7/96: simple 'set geometry' case: just set the
* 'default' device params (minor == 0).
* Currently, the drive geometry is cleared after each
* disk change and subsequent revalidate()! simple
* implementation of FDDEFPRM: save geometry from a
* FDDEFPRM call and restore it in floppy_revalidate() !
*/
/* get the parameters from user space */
if (floppy->ref != 1 && floppy->ref != -1)
return -EBUSY;
if (copy_from_user(&setprm, argp, sizeof(setprm)))
return -EFAULT;
/*
* first of all: check for floppy change and revalidate,
* or the next access will revalidate - and clear UDT :-(
*/
if (check_floppy_change(disk))
floppy_revalidate(disk);
if (UD.flags & FTD_MSG)
printk (KERN_INFO "floppy%d: setting size %d spt %d str %d!\n",
drive, setprm.size, setprm.sect, setprm.stretch);
/* what if type > 0 here? Overwrite specified entry ? */
if (type) {
/* refuse to re-set a predefined type for now */
redo_fd_request();
return -EINVAL;
}
/*
* type == 0: first look for a matching entry in the type list,
* and set the UD.disktype field to use the perdefined entry.
* TODO: add user-defined format to head of autoprobe list ?
* Useful to include the user-type for future autodetection!
*/
for (settype = 0; settype < NUM_DISK_MINORS; settype++) {
int setidx = 0;
if (minor2disktype[settype].drive_types > DriveType) {
/* skip this one, invalid for drive ... */
continue;
}
setidx = minor2disktype[settype].index;
dtp = &atari_disk_type[setidx];
/* found matching entry ?? */
if ( dtp->blocks == setprm.size
&& dtp->spt == setprm.sect
&& dtp->stretch == setprm.stretch ) {
if (UD.flags & FTD_MSG)
printk (KERN_INFO "floppy%d: setting %s %p!\n",
drive, dtp->name, dtp);
UDT = dtp;
set_capacity(floppy->disk, UDT->blocks);
if (cmd == FDDEFPRM) {
/* save settings as permanent default type */
default_params[drive].name = dtp->name;
default_params[drive].spt = dtp->spt;
default_params[drive].blocks = dtp->blocks;
default_params[drive].fdc_speed = dtp->fdc_speed;
default_params[drive].stretch = dtp->stretch;
}
return 0;
}
}
/* no matching disk type found above - setting user_params */
if (cmd == FDDEFPRM) {
/* set permanent type */
dtp = &default_params[drive];
} else
/* set user type (reset by disk change!) */
dtp = &user_params[drive];
dtp->name = "user format";
dtp->blocks = setprm.size;
dtp->spt = setprm.sect;
if (setprm.sect > 14)
dtp->fdc_speed = 3;
else
dtp->fdc_speed = 0;
dtp->stretch = setprm.stretch;
if (UD.flags & FTD_MSG)
printk (KERN_INFO "floppy%d: blk %d spt %d str %d!\n",
drive, dtp->blocks, dtp->spt, dtp->stretch);
/* sanity check */
if (!dtp || setprm.track != dtp->blocks/dtp->spt/2 ||
setprm.head != 2) {
redo_fd_request();
return -EINVAL;
}
UDT = dtp;
set_capacity(floppy->disk, UDT->blocks);
return 0;
case FDMSGON:
UD.flags |= FTD_MSG;
return 0;
case FDMSGOFF:
UD.flags &= ~FTD_MSG;
return 0;
case FDSETEMSGTRESH:
return -EINVAL;
case FDFMTBEG:
return 0;
case FDFMTTRK:
if (floppy->ref != 1 && floppy->ref != -1)
return -EBUSY;
if (copy_from_user(&fmt_desc, argp, sizeof(fmt_desc)))
return -EFAULT;
return do_format(drive, type, &fmt_desc);
case FDCLRPRM:
UDT = NULL;
/* MSch: invalidate default_params */
default_params[drive].blocks = 0;
set_capacity(floppy->disk, MAX_DISK_SIZE * 2);
case FDFMTEND:
case FDFLUSH:
/* invalidate the buffer track to force a reread */
BufferDrive = -1;
set_bit(drive, &fake_change);
check_disk_change(bdev);
return 0;
default:
return -EINVAL;
}
}
/* Initialize the 'unit' variable for drive 'drive' */
static void __init fd_probe( int drive )
{
UD.connected = 0;
UDT = NULL;
if (!fd_test_drive_present( drive ))
return;
UD.connected = 1;
UD.track = 0;
switch( UserSteprate[drive] ) {
case 2:
UD.steprate = FDCSTEP_2;
break;
case 3:
UD.steprate = FDCSTEP_3;
break;
case 6:
UD.steprate = FDCSTEP_6;
break;
case 12:
UD.steprate = FDCSTEP_12;
break;
default: /* should be -1 for "not set by user" */
if (ATARIHW_PRESENT( FDCSPEED ) || MACH_IS_MEDUSA)
UD.steprate = FDCSTEP_3;
else
UD.steprate = FDCSTEP_6;
break;
}
MotorOn = 1; /* from probe restore operation! */
}
/* This function tests the physical presence of a floppy drive (not
* whether a disk is inserted). This is done by issuing a restore
* command, waiting max. 2 seconds (that should be enough to move the
* head across the whole disk) and looking at the state of the "TR00"
* signal. This should now be raised if there is a drive connected
* (and there is no hardware failure :-) Otherwise, the drive is
* declared absent.
*/
static int __init fd_test_drive_present( int drive )
{
unsigned long timeout;
unsigned char status;
int ok;
if (drive >= (MACH_IS_FALCON ? 1 : 2)) return( 0 );
fd_select_drive( drive );
/* disable interrupt temporarily */
atari_turnoff_irq( IRQ_MFP_FDC );
FDC_WRITE (FDCREG_TRACK, 0xff00);
FDC_WRITE( FDCREG_CMD, FDCCMD_RESTORE | FDCCMDADD_H | FDCSTEP_6 );
timeout = jiffies + 2*HZ+HZ/2;
while (time_before(jiffies, timeout))
if (!(st_mfp.par_dt_reg & 0x20))
break;
status = FDC_READ( FDCREG_STATUS );
ok = (status & FDCSTAT_TR00) != 0;
/* force interrupt to abort restore operation (FDC would try
* about 50 seconds!) */
FDC_WRITE( FDCREG_CMD, FDCCMD_FORCI );
udelay(500);
status = FDC_READ( FDCREG_STATUS );
udelay(20);
if (ok) {
/* dummy seek command to make WP bit accessible */
FDC_WRITE( FDCREG_DATA, 0 );
FDC_WRITE( FDCREG_CMD, FDCCMD_SEEK );
while( st_mfp.par_dt_reg & 0x20 )
;
status = FDC_READ( FDCREG_STATUS );
}
atari_turnon_irq( IRQ_MFP_FDC );
return( ok );
}
/* Look how many and which kind of drives are connected. If there are
* floppies, additionally start the disk-change and motor-off timers.
*/
static void __init config_types( void )
{
int drive, cnt = 0;
/* for probing drives, set the FDC speed to 8 MHz */
if (ATARIHW_PRESENT(FDCSPEED))
dma_wd.fdc_speed = 0;
printk(KERN_INFO "Probing floppy drive(s):\n");
for( drive = 0; drive < FD_MAX_UNITS; drive++ ) {
fd_probe( drive );
if (UD.connected) {
printk(KERN_INFO "fd%d\n", drive);
++cnt;
}
}
if (FDC_READ( FDCREG_STATUS ) & FDCSTAT_BUSY) {
/* If FDC is still busy from probing, give it another FORCI
* command to abort the operation. If this isn't done, the FDC
* will interrupt later and its IRQ line stays low, because
* the status register isn't read. And this will block any
* interrupts on this IRQ line :-(
*/
FDC_WRITE( FDCREG_CMD, FDCCMD_FORCI );
udelay(500);
FDC_READ( FDCREG_STATUS );
udelay(20);
}
if (cnt > 0) {
start_motor_off_timer();
if (cnt == 1) fd_select_drive( 0 );
start_check_change_timer();
}
}
/*
* floppy_open check for aliasing (/dev/fd0 can be the same as
* /dev/PS0 etc), and disallows simultaneous access to the same
* drive with different device numbers.
*/
static int floppy_open(struct block_device *bdev, fmode_t mode)
{
struct atari_floppy_struct *p = bdev->bd_disk->private_data;
int type = MINOR(bdev->bd_dev) >> 2;
DPRINT(("fd_open: type=%d\n",type));
if (p->ref && p->type != type)
return -EBUSY;
if (p->ref == -1 || (p->ref && mode & FMODE_EXCL))
return -EBUSY;
if (mode & FMODE_EXCL)
p->ref = -1;
else
p->ref++;
p->type = type;
if (mode & FMODE_NDELAY)
return 0;
if (mode & (FMODE_READ|FMODE_WRITE)) {
check_disk_change(bdev);
if (mode & FMODE_WRITE) {
if (p->wpstat) {
if (p->ref < 0)
p->ref = 0;
else
p->ref--;
return -EROFS;
}
}
}
return 0;
}
static int floppy_release(struct gendisk *disk, fmode_t mode)
{
struct atari_floppy_struct *p = disk->private_data;
if (p->ref < 0)
p->ref = 0;
else if (!p->ref--) {
printk(KERN_ERR "floppy_release with fd_ref == 0");
p->ref = 0;
}
return 0;
}
static struct block_device_operations floppy_fops = {
.owner = THIS_MODULE,
.open = floppy_open,
.release = floppy_release,
.locked_ioctl = fd_ioctl,
.media_changed = check_floppy_change,
.revalidate_disk= floppy_revalidate,
};
static struct kobject *floppy_find(dev_t dev, int *part, void *data)
{
int drive = *part & 3;
int type = *part >> 2;
if (drive >= FD_MAX_UNITS || type > NUM_DISK_MINORS)
return NULL;
*part = 0;
return get_disk(unit[drive].disk);
}
static int __init atari_floppy_init (void)
{
int i;
if (!MACH_IS_ATARI)
/* Amiga, Mac, ... don't have Atari-compatible floppy :-) */
return -ENODEV;
if (register_blkdev(FLOPPY_MAJOR,"fd"))
return -EBUSY;
for (i = 0; i < FD_MAX_UNITS; i++) {
unit[i].disk = alloc_disk(1);
if (!unit[i].disk)
goto Enomem;
}
if (UseTrackbuffer < 0)
/* not set by user -> use default: for now, we turn
track buffering off for all Medusas, though it
could be used with ones that have a counter
card. But the test is too hard :-( */
UseTrackbuffer = !MACH_IS_MEDUSA;
/* initialize variables */
SelectedDrive = -1;
BufferDrive = -1;
DMABuffer = atari_stram_alloc(BUFFER_SIZE+512, "ataflop");
if (!DMABuffer) {
printk(KERN_ERR "atari_floppy_init: cannot get dma buffer\n");
goto Enomem;
}
TrackBuffer = DMABuffer + 512;
PhysDMABuffer = virt_to_phys(DMABuffer);
PhysTrackBuffer = virt_to_phys(TrackBuffer);
BufferDrive = BufferSide = BufferTrack = -1;
floppy_queue = blk_init_queue(do_fd_request, &ataflop_lock);
if (!floppy_queue)
goto Enomem;
for (i = 0; i < FD_MAX_UNITS; i++) {
unit[i].track = -1;
unit[i].flags = 0;
unit[i].disk->major = FLOPPY_MAJOR;
unit[i].disk->first_minor = i;
sprintf(unit[i].disk->disk_name, "fd%d", i);
unit[i].disk->fops = &floppy_fops;
unit[i].disk->private_data = &unit[i];
unit[i].disk->queue = floppy_queue;
set_capacity(unit[i].disk, MAX_DISK_SIZE * 2);
add_disk(unit[i].disk);
}
blk_register_region(MKDEV(FLOPPY_MAJOR, 0), 256, THIS_MODULE,
floppy_find, NULL, NULL);
printk(KERN_INFO "Atari floppy driver: max. %cD, %strack buffering\n",
DriveType == 0 ? 'D' : DriveType == 1 ? 'H' : 'E',
UseTrackbuffer ? "" : "no ");
config_types();
return 0;
Enomem:
while (i--)
put_disk(unit[i].disk);
if (floppy_queue)
blk_cleanup_queue(floppy_queue);
unregister_blkdev(FLOPPY_MAJOR, "fd");
return -ENOMEM;
}
#ifndef MODULE
static int __init atari_floppy_setup(char *str)
{
int ints[3 + FD_MAX_UNITS];
int i;
if (!MACH_IS_ATARI)
return 0;
str = get_options(str, 3 + FD_MAX_UNITS, ints);
if (ints[0] < 1) {
printk(KERN_ERR "ataflop_setup: no arguments!\n" );
return 0;
}
else if (ints[0] > 2+FD_MAX_UNITS) {
printk(KERN_ERR "ataflop_setup: too many arguments\n" );
}
if (ints[1] < 0 || ints[1] > 2)
printk(KERN_ERR "ataflop_setup: bad drive type\n" );
else
DriveType = ints[1];
if (ints[0] >= 2)
UseTrackbuffer = (ints[2] > 0);
for( i = 3; i <= ints[0] && i-3 < FD_MAX_UNITS; ++i ) {
if (ints[i] != 2 && ints[i] != 3 && ints[i] != 6 && ints[i] != 12)
printk(KERN_ERR "ataflop_setup: bad steprate\n" );
else
UserSteprate[i-3] = ints[i];
}
return 1;
}
__setup("floppy=", atari_floppy_setup);
#endif
static void __exit atari_floppy_exit(void)
{
int i;
blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
for (i = 0; i < FD_MAX_UNITS; i++) {
del_gendisk(unit[i].disk);
put_disk(unit[i].disk);
}
unregister_blkdev(FLOPPY_MAJOR, "fd");
blk_cleanup_queue(floppy_queue);
del_timer_sync(&fd_timer);
atari_stram_free( DMABuffer );
}
module_init(atari_floppy_init)
module_exit(atari_floppy_exit)
MODULE_LICENSE("GPL");