linux/drivers/acpi/namespace/nsaccess.c
Bob Moore 967440e3be ACPI: ACPICA 20060623
Implemented a new acpi_spinlock type for the OSL lock
interfaces.  This allows the type to be customized to
the host OS for improved efficiency (since a spinlock is
usually a very small object.)

Implemented support for "ignored" bits in the ACPI
registers.  According to the ACPI specification, these
bits should be preserved when writing the registers via
a read/modify/write cycle. There are 3 bits preserved
in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9],
and PM1_STATUS[11].
http://bugzilla.kernel.org/show_bug.cgi?id=3691

Implemented the initial deployment of new OSL mutex
interfaces.  Since some host operating systems have
separate mutex and semaphore objects, this feature was
requested. The base code now uses mutexes (and the new
mutex interfaces) wherever a binary semaphore was used
previously. However, for the current release, the mutex
interfaces are defined as macros to map them to the
existing semaphore interfaces.

Fixed several problems with the support for the control
method SyncLevel parameter. The SyncLevel now works
according to the ACPI specification and in concert with the
Mutex SyncLevel parameter, since the current SyncLevel is
a property of the executing thread. Mutual exclusion for
control methods is now implemented with a mutex instead
of a semaphore.

Fixed three instances of the use of the C shift operator
in the bitfield support code (exfldio.c) to avoid the use
of a shift value larger than the target data width. The
behavior of C compilers is undefined in this case and can
cause unpredictable results, and therefore the case must
be detected and avoided.  (Fiodor Suietov)

Added an info message whenever an SSDT or OEM table
is loaded dynamically via the Load() or LoadTable()
ASL operators. This should improve debugging capability
since it will show exactly what tables have been loaded
(beyond the tables present in the RSDT/XSDT.)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-28 03:11:38 -04:00

655 lines
18 KiB
C

/*******************************************************************************
*
* Module Name: nsaccess - Top-level functions for accessing ACPI namespace
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/amlcode.h>
#include <acpi/acnamesp.h>
#include <acpi/acdispat.h>
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nsaccess")
/*******************************************************************************
*
* FUNCTION: acpi_ns_root_initialize
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Allocate and initialize the default root named objects
*
* MUTEX: Locks namespace for entire execution
*
******************************************************************************/
acpi_status acpi_ns_root_initialize(void)
{
acpi_status status;
const struct acpi_predefined_names *init_val = NULL;
struct acpi_namespace_node *new_node;
union acpi_operand_object *obj_desc;
acpi_string val = NULL;
ACPI_FUNCTION_TRACE(ns_root_initialize);
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/*
* The global root ptr is initially NULL, so a non-NULL value indicates
* that acpi_ns_root_initialize() has already been called; just return.
*/
if (acpi_gbl_root_node) {
status = AE_OK;
goto unlock_and_exit;
}
/*
* Tell the rest of the subsystem that the root is initialized
* (This is OK because the namespace is locked)
*/
acpi_gbl_root_node = &acpi_gbl_root_node_struct;
/* Enter the pre-defined names in the name table */
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Entering predefined entries into namespace\n"));
for (init_val = acpi_gbl_pre_defined_names; init_val->name; init_val++) {
/* _OSI is optional for now, will be permanent later */
if (!ACPI_STRCMP(init_val->name, "_OSI")
&& !acpi_gbl_create_osi_method) {
continue;
}
status = acpi_ns_lookup(NULL, init_val->name, init_val->type,
ACPI_IMODE_LOAD_PASS2,
ACPI_NS_NO_UPSEARCH, NULL, &new_node);
if (ACPI_FAILURE(status) || (!new_node)) { /* Must be on same line for code converter */
ACPI_EXCEPTION((AE_INFO, status,
"Could not create predefined name %s",
init_val->name));
}
/*
* Name entered successfully.
* If entry in pre_defined_names[] specifies an
* initial value, create the initial value.
*/
if (init_val->val) {
status = acpi_os_predefined_override(init_val, &val);
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO,
"Could not override predefined %s",
init_val->name));
}
if (!val) {
val = init_val->val;
}
/*
* Entry requests an initial value, allocate a
* descriptor for it.
*/
obj_desc =
acpi_ut_create_internal_object(init_val->type);
if (!obj_desc) {
status = AE_NO_MEMORY;
goto unlock_and_exit;
}
/*
* Convert value string from table entry to
* internal representation. Only types actually
* used for initial values are implemented here.
*/
switch (init_val->type) {
case ACPI_TYPE_METHOD:
obj_desc->method.param_count =
(u8) ACPI_TO_INTEGER(val);
obj_desc->common.flags |= AOPOBJ_DATA_VALID;
#if defined (ACPI_ASL_COMPILER)
/* Save the parameter count for the i_aSL compiler */
new_node->value = obj_desc->method.param_count;
#else
/* Mark this as a very SPECIAL method */
obj_desc->method.method_flags =
AML_METHOD_INTERNAL_ONLY;
#ifndef ACPI_DUMP_APP
obj_desc->method.implementation =
acpi_ut_osi_implementation;
#endif
#endif
break;
case ACPI_TYPE_INTEGER:
obj_desc->integer.value = ACPI_TO_INTEGER(val);
break;
case ACPI_TYPE_STRING:
/*
* Build an object around the static string
*/
obj_desc->string.length =
(u32) ACPI_STRLEN(val);
obj_desc->string.pointer = val;
obj_desc->common.flags |= AOPOBJ_STATIC_POINTER;
break;
case ACPI_TYPE_MUTEX:
obj_desc->mutex.node = new_node;
obj_desc->mutex.sync_level =
(u8) (ACPI_TO_INTEGER(val) - 1);
if (ACPI_STRCMP(init_val->name, "_GL_") == 0) {
/* Create a counting semaphore for the global lock */
status =
acpi_os_create_semaphore
(ACPI_NO_UNIT_LIMIT, 1,
&acpi_gbl_global_lock_semaphore);
if (ACPI_FAILURE(status)) {
acpi_ut_remove_reference
(obj_desc);
goto unlock_and_exit;
}
/* Mark this mutex as very special */
obj_desc->mutex.os_mutex =
ACPI_GLOBAL_LOCK;
} else {
/* Create a mutex */
status =
acpi_os_create_mutex(&obj_desc->
mutex.
os_mutex);
if (ACPI_FAILURE(status)) {
acpi_ut_remove_reference
(obj_desc);
goto unlock_and_exit;
}
}
break;
default:
ACPI_ERROR((AE_INFO,
"Unsupported initial type value %X",
init_val->type));
acpi_ut_remove_reference(obj_desc);
obj_desc = NULL;
continue;
}
/* Store pointer to value descriptor in the Node */
status = acpi_ns_attach_object(new_node, obj_desc,
ACPI_GET_OBJECT_TYPE
(obj_desc));
/* Remove local reference to the object */
acpi_ut_remove_reference(obj_desc);
}
}
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
/* Save a handle to "_GPE", it is always present */
if (ACPI_SUCCESS(status)) {
status = acpi_ns_get_node(NULL, "\\_GPE", ACPI_NS_NO_UPSEARCH,
&acpi_gbl_fadt_gpe_device);
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_lookup
*
* PARAMETERS: scope_info - Current scope info block
* Pathname - Search pathname, in internal format
* (as represented in the AML stream)
* Type - Type associated with name
* interpreter_mode - IMODE_LOAD_PASS2 => add name if not found
* Flags - Flags describing the search restrictions
* walk_state - Current state of the walk
* return_node - Where the Node is placed (if found
* or created successfully)
*
* RETURN: Status
*
* DESCRIPTION: Find or enter the passed name in the name space.
* Log an error if name not found in Exec mode.
*
* MUTEX: Assumes namespace is locked.
*
******************************************************************************/
acpi_status
acpi_ns_lookup(union acpi_generic_state *scope_info,
char *pathname,
acpi_object_type type,
acpi_interpreter_mode interpreter_mode,
u32 flags,
struct acpi_walk_state *walk_state,
struct acpi_namespace_node **return_node)
{
acpi_status status;
char *path = pathname;
struct acpi_namespace_node *prefix_node;
struct acpi_namespace_node *current_node = NULL;
struct acpi_namespace_node *this_node = NULL;
u32 num_segments;
u32 num_carats;
acpi_name simple_name;
acpi_object_type type_to_check_for;
acpi_object_type this_search_type;
u32 search_parent_flag = ACPI_NS_SEARCH_PARENT;
u32 local_flags;
ACPI_FUNCTION_TRACE(ns_lookup);
if (!return_node) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
local_flags = flags & ~(ACPI_NS_ERROR_IF_FOUND | ACPI_NS_SEARCH_PARENT);
*return_node = ACPI_ENTRY_NOT_FOUND;
acpi_gbl_ns_lookup_count++;
if (!acpi_gbl_root_node) {
return_ACPI_STATUS(AE_NO_NAMESPACE);
}
/*
* Get the prefix scope.
* A null scope means use the root scope
*/
if ((!scope_info) || (!scope_info->scope.node)) {
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Null scope prefix, using root node (%p)\n",
acpi_gbl_root_node));
prefix_node = acpi_gbl_root_node;
} else {
prefix_node = scope_info->scope.node;
if (ACPI_GET_DESCRIPTOR_TYPE(prefix_node) !=
ACPI_DESC_TYPE_NAMED) {
ACPI_ERROR((AE_INFO, "%p is not a namespace node [%s]",
prefix_node,
acpi_ut_get_descriptor_name(prefix_node)));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
if (!(flags & ACPI_NS_PREFIX_IS_SCOPE)) {
/*
* This node might not be a actual "scope" node (such as a
* Device/Method, etc.) It could be a Package or other object node.
* Backup up the tree to find the containing scope node.
*/
while (!acpi_ns_opens_scope(prefix_node->type) &&
prefix_node->type != ACPI_TYPE_ANY) {
prefix_node =
acpi_ns_get_parent_node(prefix_node);
}
}
}
/* Save type TBD: may be no longer necessary */
type_to_check_for = type;
/*
* Begin examination of the actual pathname
*/
if (!pathname) {
/* A Null name_path is allowed and refers to the root */
num_segments = 0;
this_node = acpi_gbl_root_node;
path = "";
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Null Pathname (Zero segments), Flags=%X\n",
flags));
} else {
/*
* Name pointer is valid (and must be in internal name format)
*
* Check for scope prefixes:
*
* As represented in the AML stream, a namepath consists of an
* optional scope prefix followed by a name segment part.
*
* If present, the scope prefix is either a Root Prefix (in
* which case the name is fully qualified), or one or more
* Parent Prefixes (in which case the name's scope is relative
* to the current scope).
*/
if (*path == (u8) AML_ROOT_PREFIX) {
/* Pathname is fully qualified, start from the root */
this_node = acpi_gbl_root_node;
search_parent_flag = ACPI_NS_NO_UPSEARCH;
/* Point to name segment part */
path++;
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Path is absolute from root [%p]\n",
this_node));
} else {
/* Pathname is relative to current scope, start there */
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Searching relative to prefix scope [%4.4s] (%p)\n",
acpi_ut_get_node_name(prefix_node),
prefix_node));
/*
* Handle multiple Parent Prefixes (carat) by just getting
* the parent node for each prefix instance.
*/
this_node = prefix_node;
num_carats = 0;
while (*path == (u8) AML_PARENT_PREFIX) {
/* Name is fully qualified, no search rules apply */
search_parent_flag = ACPI_NS_NO_UPSEARCH;
/*
* Point past this prefix to the name segment
* part or the next Parent Prefix
*/
path++;
/* Backup to the parent node */
num_carats++;
this_node = acpi_ns_get_parent_node(this_node);
if (!this_node) {
/* Current scope has no parent scope */
ACPI_ERROR((AE_INFO,
"ACPI path has too many parent prefixes (^) - reached beyond root node"));
return_ACPI_STATUS(AE_NOT_FOUND);
}
}
if (search_parent_flag == ACPI_NS_NO_UPSEARCH) {
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Search scope is [%4.4s], path has %d carat(s)\n",
acpi_ut_get_node_name
(this_node), num_carats));
}
}
/*
* Determine the number of ACPI name segments in this pathname.
*
* The segment part consists of either:
* - A Null name segment (0)
* - A dual_name_prefix followed by two 4-byte name segments
* - A multi_name_prefix followed by a byte indicating the
* number of segments and the segments themselves.
* - A single 4-byte name segment
*
* Examine the name prefix opcode, if any, to determine the number of
* segments.
*/
switch (*path) {
case 0:
/*
* Null name after a root or parent prefixes. We already
* have the correct target node and there are no name segments.
*/
num_segments = 0;
type = this_node->type;
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Prefix-only Pathname (Zero name segments), Flags=%X\n",
flags));
break;
case AML_DUAL_NAME_PREFIX:
/* More than one name_seg, search rules do not apply */
search_parent_flag = ACPI_NS_NO_UPSEARCH;
/* Two segments, point to first name segment */
num_segments = 2;
path++;
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Dual Pathname (2 segments, Flags=%X)\n",
flags));
break;
case AML_MULTI_NAME_PREFIX_OP:
/* More than one name_seg, search rules do not apply */
search_parent_flag = ACPI_NS_NO_UPSEARCH;
/* Extract segment count, point to first name segment */
path++;
num_segments = (u32) (u8) * path;
path++;
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Multi Pathname (%d Segments, Flags=%X)\n",
num_segments, flags));
break;
default:
/*
* Not a Null name, no Dual or Multi prefix, hence there is
* only one name segment and Pathname is already pointing to it.
*/
num_segments = 1;
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Simple Pathname (1 segment, Flags=%X)\n",
flags));
break;
}
ACPI_DEBUG_EXEC(acpi_ns_print_pathname(num_segments, path));
}
/*
* Search namespace for each segment of the name. Loop through and
* verify (or add to the namespace) each name segment.
*
* The object type is significant only at the last name
* segment. (We don't care about the types along the path, only
* the type of the final target object.)
*/
this_search_type = ACPI_TYPE_ANY;
current_node = this_node;
while (num_segments && current_node) {
num_segments--;
if (!num_segments) {
/*
* This is the last segment, enable typechecking
*/
this_search_type = type;
/*
* Only allow automatic parent search (search rules) if the caller
* requested it AND we have a single, non-fully-qualified name_seg
*/
if ((search_parent_flag != ACPI_NS_NO_UPSEARCH) &&
(flags & ACPI_NS_SEARCH_PARENT)) {
local_flags |= ACPI_NS_SEARCH_PARENT;
}
/* Set error flag according to caller */
if (flags & ACPI_NS_ERROR_IF_FOUND) {
local_flags |= ACPI_NS_ERROR_IF_FOUND;
}
}
/* Extract one ACPI name from the front of the pathname */
ACPI_MOVE_32_TO_32(&simple_name, path);
/* Try to find the single (4 character) ACPI name */
status =
acpi_ns_search_and_enter(simple_name, walk_state,
current_node, interpreter_mode,
this_search_type, local_flags,
&this_node);
if (ACPI_FAILURE(status)) {
if (status == AE_NOT_FOUND) {
/* Name not found in ACPI namespace */
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Name [%4.4s] not found in scope [%4.4s] %p\n",
(char *)&simple_name,
(char *)&current_node->name,
current_node));
}
*return_node = this_node;
return_ACPI_STATUS(status);
}
/*
* Sanity typecheck of the target object:
*
* If 1) This is the last segment (num_segments == 0)
* 2) And we are looking for a specific type
* (Not checking for TYPE_ANY)
* 3) Which is not an alias
* 4) Which is not a local type (TYPE_SCOPE)
* 5) And the type of target object is known (not TYPE_ANY)
* 6) And target object does not match what we are looking for
*
* Then we have a type mismatch. Just warn and ignore it.
*/
if ((num_segments == 0) &&
(type_to_check_for != ACPI_TYPE_ANY) &&
(type_to_check_for != ACPI_TYPE_LOCAL_ALIAS) &&
(type_to_check_for != ACPI_TYPE_LOCAL_METHOD_ALIAS) &&
(type_to_check_for != ACPI_TYPE_LOCAL_SCOPE) &&
(this_node->type != ACPI_TYPE_ANY) &&
(this_node->type != type_to_check_for)) {
/* Complain about a type mismatch */
ACPI_WARNING((AE_INFO,
"NsLookup: Type mismatch on %4.4s (%s), searching for (%s)",
ACPI_CAST_PTR(char, &simple_name),
acpi_ut_get_type_name(this_node->type),
acpi_ut_get_type_name
(type_to_check_for)));
}
/*
* If this is the last name segment and we are not looking for a
* specific type, but the type of found object is known, use that type
* to see if it opens a scope.
*/
if ((num_segments == 0) && (type == ACPI_TYPE_ANY)) {
type = this_node->type;
}
/* Point to next name segment and make this node current */
path += ACPI_NAME_SIZE;
current_node = this_node;
}
/*
* Always check if we need to open a new scope
*/
if (!(flags & ACPI_NS_DONT_OPEN_SCOPE) && (walk_state)) {
/*
* If entry is a type which opens a scope, push the new scope on the
* scope stack.
*/
if (acpi_ns_opens_scope(type)) {
status =
acpi_ds_scope_stack_push(this_node, type,
walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
}
*return_node = this_node;
return_ACPI_STATUS(AE_OK);
}